Making a micro tool holder part 1 of 3 "HD"

[yotamkasam1]

Tryally, I love your work and videos. Keep on the good job!

Can you provide some information about the large fly cutter you are using?

Thanks

[tryally]

@yotamkasam1

Thank you so much for your kind words.

The fly cutter is made by me, Soon I will dispose in market because the result is amazing.

And too as soon as possible I will post a detailed video about it.

Best wishes from Brazil

Luiz Ally

[ozial2007]

Thank you for sharing your skills and knowledge - I learned quite a lot from this. I am envious of your machinary as well :). Lets hope that Hekel turns out as good as his proud dad in the workshop (he has an excellent teacher).

[gardnerdc]

Can thos video be translated to English?

[tryally]

@gardnerdc

Thanks for your kind words, I'm happy with this.

As soon as possible I will make new videos about many interesting things, I hope that you appreciate

Kindest regards from Brazil

Luiz

[brenck]

É eu vou fazer outra pois estou terminando uma outra cnc pra mim que vou substituir pela que tenho aqui e ai vou prestar atenção aos detalhes. Continue postando os otimos videos. Abç

[brenck]

Acho que é porque a minha é maior eu não uso em sherline. Talvez seja porque a minha não tem aquele calço a minha fiz com um parafuso mais comprido que vai direto na peça de aperto, talvez pode ser tbm pq usei um parafuso mais grosso M14 e a força de aperto ta tão forte que faz levantar a peça

[tryally]

Sim pode ser isso,

Note que para engrave não precisa de aperto extremo, apenas um aperto satisfatório e firme.

A slim vise (morsa fina) que desenvolvi é feita justamente para suplir esse problema da peça se mexer no aperto.

Lembre-se da parte deslisante estar levemente apertada antes do aperto da peça a ser trabalhada.

Alguns amigos dos Euas fizeram como vc (parafuso) e tem funcionado bem.

Abç

Luiz

[brenck]

bela qualidade de video é camera digital ou é filmadora mesmo qual modelo usa? Fiz uma morsa desse tipo pra mim e não funcionou muito bem no cnc, quando prende as peças da uma levantadinha e acaba que a peça fica um pouco inclinada. Se for pra engrave nao da muito certo

[tryally]

Obrigado pelo comentário.

Uso filmadora Canon mod. XL1 e na edição uso placa de captura Matrox RTX100 Pro.

Na morsa deve ter algo errado, deve funcionar perfeito pra engrave, demonstro isso em um de meus vídeos. Amigos me escrevem dizendo que usam na maior das vz para engrave. Verifique o angulo de 90 graus e o bloco deslizante, faça sempre um pré aperto suave antes é importante.

Luiz Ally

[davfritz]

Don't you leave that machine out in the weather! My friend always leaves his lathes and other machines out in the weather....... I can assure you, they don't like it. His hurcus has been outside for 5 years!

[tryally]

Hi, you are right, thanks for your comment.

Regards from Brazil

Luiz

[rsierzant]

Great videos. You are truly a master craftsman. Please continue making more videos. I would like to make your planing cutter. What material did you use; steel?What are the dimensions of the cutter tool holder? How are the cutters made and installed in the holder/ I will also make your slim milling vice. What are the dimensions for this vice?

Thank you for all your efforts.

[tryally]

Thank you very much for your kind comment.

Please send your e-mail and I will send you some pictures about my fly cutter.

Best regards from Brasil

Luiz

[Axbent]

ever had a mill catch the table when ure milling with the feed?

[lechrisme]

Congrats my dear cousin!!!

Your videos are great.

Kiss & hugs

Leila Cristina

[tryally]

Thanks dear!

Soon I will post new vids.

kind regards

Luiz Ally

[fgleich]

You have a lot of great videos, with lots of good information, and lots of very creative ideas. Could you make a video showing how you made the planing cutter you are using in the mill ? Thank you for all the vids, I've spent hours and hours watching.

:D

[tryally]

Thank you very much for your the comment

Shortly I will make the video about my planing cutter, really this tool is very good.

Thanks again

Luiz

[5150VH3]

Great video, as allways!!

[tryally]

Thank you very much.

Luiz

[latheworks]

Felicitaciones por la nueva venida amigo. A ver si algún día haces un vídeo de las máquinas que tienes y como empezaste en esto. Eres grande!

[tryally]

(In portuguese)

Muitíssimo obrigado meu amigo Guilhermo.

Você é uma pessoa muito bacana!!

Prazer enorme você apreciar meus vídeos e comentar também.

Grande e forte abraço

Luiz

[TheWorldGatekeeper]

nice work shop you have and nice video too

it is your's ?

[tryally]

Yes, by me!

I make all production, alone

Regards

Luiz

[shaver9876]

Luiz:

so gald to see your kids!!! lovely boys!!! and please take great care of them in the workshop! wearing glasses all this time!

Wait to see the next two videos!

[tryally]

Yes, thanks shaver9876

My next 2 vídeos, I'm going posting now

Shortly it's on air

Regards

[dnfwrunkdnfw]

Luiz

Very good video, this is very entertaining , and informative.

What material are you using?

say Happy Birthday to the triplets.

gary- Kentucky USA

[tryally]

Hi Gary

I use a steel 1045 to holder.

In this Sunday morning, the two videos of the series are being posted.

Thanks from my tryplets

Luiz

[rattlesnaker]

I've been waiting for this, Great THANKS!

We'd all use your fly cutter but you have to show us how you made it:) ;hint;

Great to see your children involved

[tryally]

Hi

Shortly I will post a video about my flycutter in details

Thank for your attention

Regards

Luiz

[GHNorfleet]

Excellent, I am making one of your flycutters but am unsure of how to make the carbide cutter, if possible make a video of the making of the flycutter. I have learned so much from you, you are a great person.

[tryally]

Hi, Gilbert

Thanks for the comment.

I pretend to make the flycutter video.

Shortly i will put it on youtube.

Best regards

Luiz

[andax2007]

Great to see posts from you again! Will follow it closely. Best regards!!

[tryally]

Thanks andax2007

I'm glad with you comment.

My best regards

Luiz

[canbaja5]

VERY good!

like the rest, I am already enjoying this series.

[tryally]

Thank you my friend!

Hugs

Luiz