this sounds stupid but how can i make soles on 11s seperate!?!?! I NEED to know its a long stupid story on why but thats not the point, i just need to know how to do it fast without damaging the shoe
do u think i can use this restoration method on cool grey ixs? mines r nds but midsole is staring to separate get back to me bro kyle.flowers@gmail.com
E6000 works great for shoes that separated. Almost half the the side of one of my dress shoes separated and I just squeezed it into the gap, clamped it and left it to dry.
By the way, E6000 takes 24-48 hours to fully cure, depending on temperature, not 12. After 12 hours it would probably be cured enough for light use but I wouldn't do any exercising or anything stressful for the full 48.
I'm about to get some old Jordan 6 Infrareds, but the sellers tells me the midsole is failing. How would I go about fixing that, seeing as the sole isn't as simple to me, or I haven't every done anything like this
I have severe midsole separations with my OG AJ 13 white/blacks and playoffs.
I tried to fix them with some super glues but it was in vain as the glue i used were not really suitable to fix shoes with soft PU/Phylon midsoles etc.
Now i took them to my local shoemaker, but he said even his glue might not strong enough to repair them for wearing.
Any tipps you can give me? that would be great, thanks dude ^^
@restoremysneakers any suggestions for six rings concords from 2008? ive worn them so yes they have slight yellowing and dullness in the mesh. and the icey is obviously not anymore, wondering if what can be done to illuminate the white mesh again. thanks.
@KiNFRESHHH The lighting can still use some work. I've been trying to learn how to get the lighting right, but a lot of it is based on your lens and camera settings. Did you ever get that Nikon?
@restoremysneakers I think it's great man. No, I've been researching thoroughly all of the cameras you told me that are the best. Don't wanna spend $500+ without researching right? haha. Looking to make a purchase in the next few weeks though :)
would super glue be fine?
IanV21 2 days ago
@restoremysneakers can you use barge cement instead of E-6000?
I live in canada I dont know what a substitute is instead of it
ColeKeele 4 days ago
this sounds stupid but how can i make soles on 11s seperate!?!?! I NEED to know its a long stupid story on why but thats not the point, i just need to know how to do it fast without damaging the shoe
lipridelax41 3 weeks ago
do u think i can use this restoration method on cool grey ixs? mines r nds but midsole is staring to separate get back to me bro kyle.flowers@gmail.com
kflowers8807 1 month ago
How much would it cost to repair my 2001 Concord 11's? You could contact me at thekidsnextdoor123@gmail.com.
notflagged 2 months ago
You GUYS SHOULD DO A AIR JORDAN 6 RESTORE!!!!!!!!
MrSneakerhead365 2 months ago
E6000 works great for shoes that separated. Almost half the the side of one of my dress shoes separated and I just squeezed it into the gap, clamped it and left it to dry.
By the way, E6000 takes 24-48 hours to fully cure, depending on temperature, not 12. After 12 hours it would probably be cured enough for light use but I wouldn't do any exercising or anything stressful for the full 48.
Willgtl 3 months ago
I need help glueing the sole back on to my olive 5s plzz help
djsnoop11 3 months ago in playlist More videos from restoremysneakers
the video quality is great
krazzyyo2 4 months ago
awesome videos thanks how do u get all ur shoes?
MrTrax1990 5 months ago
E6000 or the cement stuff?
adobee999 6 months ago
@restoremysneakers
I'm about to get some old Jordan 6 Infrareds, but the sellers tells me the midsole is failing. How would I go about fixing that, seeing as the sole isn't as simple to me, or I haven't every done anything like this
PedobearNGU 8 months ago
hello restoremysneakers,
I have severe midsole separations with my OG AJ 13 white/blacks and playoffs.
I tried to fix them with some super glues but it was in vain as the glue i used were not really suitable to fix shoes with soft PU/Phylon midsoles etc.
Now i took them to my local shoemaker, but he said even his glue might not strong enough to repair them for wearing.
Any tipps you can give me? that would be great, thanks dude ^^
jumpman cbt2
masterchiefrules2012 11 months ago
Where can you buy e-600 like home depot? And how much does it cost?
mel23jordan 11 months ago
Im guessing this can be done on the cool grey IX's. they are separating and need this.
er1038 11 months ago
You could also use Shoe Goo. It works just as good and you can buy it at CVS, just so you know.
smokinspef 11 months ago
can this be done on a pair of XII but its from the front part of the shoe?
23jvega 1 year ago
Could i use "fix-all adhesive" glue?
carlover206 1 year ago
could i jst use crazy glue
nhpjosh13 1 year ago
@restoremysneakers any suggestions for six rings concords from 2008? ive worn them so yes they have slight yellowing and dullness in the mesh. and the icey is obviously not anymore, wondering if what can be done to illuminate the white mesh again. thanks.
iotaken 1 year ago
@iotaken RIT Whitener and Brightener. However, I've never got it to work on my Concord's mesh.
restoremysneakers 1 year ago
@restoremysneakers thanks alot fam
iotaken 1 year ago
How da fuck does separation even occur. Wtf do u possibly do with your sneakers for this to happen?
jerseysheavyhitter 1 year ago
where do you get e 6000 at?
AhhboyyouGay 1 year ago
@AhhboyyouGay I got mine at Walmart and Kmart.
restoremysneakers 1 year ago
Great vid
Icekool23 1 year ago
Thanks for the tips! much appreciated!
MrDforizzle 1 year ago
those look DS.
123wang 1 year ago
You can also use rubberbands to hold the sole.
PureCents 1 year ago
@restoremysneakers hey my cool greys are seperated at the midsole do I use the same method?
squidar61 1 year ago
and the white piece of paper was for? o.O lol
but thanks for the tips, definitely will help for future problems i may run into.
dannyx2o1x 1 year ago
@dannyx2o1x My brother thought it'd be obvious, but I'd figure there would be questions. It's just to keep the area clean.
- The Camera Guy
restoremysneakers 1 year ago
@restoremysneakers yeah that was what i thought. lol just had to make sure but thanks again.
dannyx2o1x 1 year ago
good stuff like always learned how to apply the glue instead of squeezing into the separation. haha
DKMeng 1 year ago
Your lightning is fucking rediculous. It is absolutely perfect.
Thanks the tips, btw.
KiNFRESHHH 1 year ago
@KiNFRESHHH The lighting can still use some work. I've been trying to learn how to get the lighting right, but a lot of it is based on your lens and camera settings. Did you ever get that Nikon?
restoremysneakers 1 year ago
@restoremysneakers I think it's great man. No, I've been researching thoroughly all of the cameras you told me that are the best. Don't wanna spend $500+ without researching right? haha. Looking to make a purchase in the next few weeks though :)
KiNFRESHHH 1 year ago
my coolgreys are starting to move slowy but fo u think it will get worse? and how do i prevent it.....but only the left side
96mexican1 3 months ago
@restoremysneakers same thing on the bottom sole but on the front or toe part??nd for 2010 release
96mexican1 3 months ago
Wussup, we r the sneaker Brothers we just started a few day s ago and been up all day lol makin vids pls subscribe to us.
Thanks, UR Friend SBChet
TheSoleBrothers 1 year ago