DIY: Infiniti G35 sedan front brakes

[uclalaker2009]

and boom here we go haha great video man about to change my brakes now!

[jalope07]

Great directions very easy to follow!!

[TheVwguy87]

Good vid, I just want to throw in that its handy to have a turkey baster around to draw out excess brake fluid if needed.

[Green5Penguin]

Great vid!  I used this as a guide to do my rears last year! I noticed you didn't remove the shims from your old pads to put on the new ones. Is that ok?

[L0new0lf1070]

Just an update.....the job is done. Followed your directions exactly and was done in less than an hour. I didn't have a c-clamp so I used a piece of wood and forced the pistons in. Other than that, this was easier than changing my oil. Thanks again.

[L0new0lf1070]

Very good video! Thanks for the outstanding tips. I'm going to give it shot on the wife's G35 right now.

[GSBdoingitbig]

whats good yo

[thinkboutit]

I'm confused with the c clamp. So it pushes the piston in so you can put the caliper back over the new pads?

[frogtofall]

Best part of this video is whenever you say, "Boom!" :-D Nice vid man.

[undefined478]

Great video. Thank you just saved myelf 275 dollars.

[MusicPass]

Great video, just did my first brake job. This shows just how simple it is. Thanks for posting always to see it done before I venture into it.

[MusicPass]

Great video, just did my first brake job. This shows just how simple it is. Thanks for posting always to see it done before I venture into it.

[chris000089]

How much does it cost to change all pads and rotors?

[darickmeister]

nice vid bro

[cuffy8]

Nice video, I have found the easiest thing to do when compressing the caliper instead of putting it on the edge or inside, both can harm the caliper, put an old pad on the caliper and use the "c" clamp on the old pad. This way nothing can get damaged.

[imotomoves]

i saw that u had an intake in there. i want one on my 35x, but will it make my check engine light come on?

[caketech]

@imotomoves he just has a JWT pop charger and z tube, won't cause any check engine lights.

[MuscleLife23]

great vid but dont put the c clamp inside...........put it on the rim and trun it in to compress it..youll damage that unit....trust me on that one...but great vid

[r1killen]

@MuscleLife23 actually your wrong muscle head putting it on the edge when u end up getting to the end u will tear the rubber which is on the edge so better on the inside but the proper way is with a caliper press but nice try

[goss0062]

Great vid, needed this to replace my brakes else I wouldn'tknow where to start

[mmuhammad95]

great video

[GradyWhite2007]

Man...I've done some brake jobs on many other cars...this one looks easy. I'm not gonna pay a fortune for someone to work on my coupe.

[dre10475]

Grate video tips an all

[Drwright23]

Wouldn't have tried without this video, sooo easy to do... Thanks

[11jjpp22]

Great video. Helped me a lot thanks

[sedallaspa]

Good job! I would have given you five stars if you did the rotors too.

[caddysd]

Did my front brakes in under an hour and saved a few hundred bucks by not going to the dealer. Great video!

[manisuzie]

what is a geed pad for my G35 sudan. i dont want to pay for very expensive pad . i need a reliable pads.

[liljoegangsta]

Is it pretty much the same with the coupe? I'm assuming it's exactly the same right? Just waiting for my pads to come in so I can replace them

[Gigix123x]

clearly the best video out there. great job and thanks for the post!!

[dedzone]

Just changed my brakes thanks to this video. Thanks a bunch.

[mikeorr21]

lol i need a C clamp cause that round thing is hanging out and i cant get it back in. lmao. thanks for the help good video

[rungym]

good clear video is there one for the back brakes

[rungym]

good clear video is there one for the back brakes

[baizx]

great job! thanks a lot bro

[joeyalbergo]

You made a great video! This is super detailed and I am very happy to know your out there working on the Infiniti.

I have a question, does the caliper cylinder come out slowly after I remove it?

Also how can I tell if I have Brembo or Stock brakes on my 03 G35x Sedan?

Look forward to hearing from you.

GREAT VIDEO!!!

[1394life6]

nice video i got a 03 sedan but it squeaks i dont know the problem cud u help me out?

[carbonhornet]

two reasons 1: if your brakes are old, the wear indicators are making it squeak. 2: if you did your brakes recently and they are squealing you need to put brake lube or anti sqeal anywhere the pad touches the caliper other than the side touching the rotor. do not put it on the side touching the rotor or you will have problems ok.

[cholauj]

how do u know if u got brembos or base?

does it say on there? i got a 07 g35 sedan 6mt

[carbonhornet]

it will say brembo on the caliper and i believe the brembo may have more than one piston also but im not sure.

[PotaytorProductions]

Great Video.....Thanks...Save me a few hundred bucks taking it to the shop!

[rvkempf]

great video, did my brakes this morning, easy as cake

[choicecash]

@rvkempf yeah easy as cake until you find out that the only bolt that will budge is the bottom one! Fuck it took me a while. But after almost giving up someone told me the top bot is seized! easy as Cake my ass! This vid saved me hunderds of dollar but DONT try to remove the top bold!

[henrygee69]

Great video! I got a 2007 G35 Sedan, does the same process apply to my vehicle's rear breaks?