do you have a lock like exactly like this one or one similar? most people mess up when trying to find the combination on back once the pin is all the way in. it will work if you do it right. i promise!
once you get ur pin through all the holes the combination should be on the back you then have to flip around the numbers to the front. you might just be putting in the wrong combination trythe ones around the others
what a conveniently placed hole... and those bicycle U-locks were mystically made to perfectly receive a BIC pen and get unlocked easily :D i sometimes wonder whether there really is some niche of people (elites) who create these technologies and systems and leave a secret flaw/hole for themselves, like secret ATM combinations, etc etc just so they can always rely on their creations whenever they needed them :D :D
@ragingbullhcwf thanks for you comment. i promise you that if you use the correct size bobby pin this will work. your pin was probably too wide to fall in between the tumblers.
@RaymondHamby I used a paper clip and safety pin. Could not find bobby pin that would fit. Got all the way down to the last tumbler, but lock would not open. I even went to a locksmith who played with it for a few minutes and he wanted to charge me $25 to open it.
I went to 2 drug stores looking for bobby pins that would fit. CVS and Walgreens all had bobby pins that were too thick. Hard to get the right bobby pin in NJ.
@doughhead159 you are very welcome glad i could help, please check out my other tutorials including how to pick a car lock if you lock your keys in it
@Hotpeppers111 yes that will probably help you out because the tumblers hole is about the same size as the bobby pin i was using so the bigger ones shouldnt work plus like i said be sure to remove the plastic that covers the end.
@Hotpeppers111 either your bobby pins is too large or you are not doing it correctly. be patient and jiggle the pin around as you spin the numbers it should go in you also have to take off the plastic on the ends of the bobby pin
@Hotpeppers111 is your lock the same as mine. if not tell me wnhat kind it is. are you looking at the combination on the back of the lock and then spinning it to the front. which part are you stuck at?
@redrider112 youre very welcome glad i could help. if you havent already please favorite this video and give it a thumbs up. im trying to get my name out there and id appreciate your help. also please check out my other tutorial videos on my channel i think you will like them!! thanks alot!!!!!
@hitachimagicwandUK because that was the combination.go back and listen to the video when i say that the bobby oins doesnt actually unlock it but it gives the combination on back which was 8037 then just spin the lock around and put in 8037 and it unlocks.
@TheOneTheOnly1996yr hey i really, really appreciate that comment. i do my best to make my tutorials easy to understand and follow. if you are interested i have others on my page if you want to check them out. thanks again!
@cutiepie1953 well im glad my video could help you out. now u know if you turn the open lock and push it down you can then change the combination right. thanks for watching and commenting. i always appreciate it.
@kevinmeister1964 well im glad this helped you and im glad you enjoyed the video. i have alot of other tutorials coming soon. if you subscribe youll be updated when i upload them. please stay tuned. glad you enjoyed it
@David363170 sure you can email me the picture at raymondhamby@live.com be sure to send a picture of all four sides the top and bottom also if there is any serial number and brand please send pictures as well. it will help me figure out the specific type of lock it is and make it alot easier.
It is pretty much the same one you have but it's green the problem is there is no space were the boby pen could fit in, can u reply asap i need it for school
@David363170 well there is probably a place for a bobby pin to fit if it is a number lock like this one or one similiar. it might not be in the same place but im sure there is one there. it might be on the bottom or sides. if there isnt and you are sure of this then you might be able totake something thin enough to slide between the numbers dials and u can either feel where the right spot is in the tumbler or you can pry it open slighty and actually see where it is and open it like that.
I know, picking key locks seems easy with the right tools, and locks like these I found at school and broke into them in a matter of seconds with no prior knowledge on how to brake into them. With locks like these all you need to do is pull on it and feel for any irregularities and you can usually get them open. I can't get mine closed though. I changed the password and scrambled it to show I could open it, then messed up changing it back and can't close it.
@inverseactuality hey thanks for the responses and comments. its not only pad lock or number locks there isnt much of anything i cant break into including house doors ,windows cars etc. there isnt any car that i have found yet that i cant get into. now i never use my talents for anything illegal and never would but i use them to bet peoples keys out of their cars if they lock them in there or something like that. i plan on making some videos or other various ways to get keys out of a car.
You're welcome. I'm hoping to learn how to break into all types of locks, but like you, not for illegal purposes. I'm hoping to learn all the flaws of locks so I can make a non electric lock that can't be broken in to without physically breaking the lock.
@inverseactuality hey thats a great idea, but what would be the locking mechanism. most of the flaws in locks are the pins and tumblers there is usually an access point to reach these things so u would have to figure a way around this. hell i can pick a masterkey poad lock with a coke can. also making a video on how to do that. i also manufacture my own lock picks and will make a tutorial on that as well so please stay tuned
@ItsOver90000000 yes this technique should still work with your problem. just take your time and find the openings in the cylinders and you'll be fine
@tom98277 hey no problem im glad i could help you out! if you get a chance please check out my other tutorial videos and be on the lookout for more videos. please subscribe if you find my tutorials helpful. also check out my main main if you like comedy video at raymondhamby2424 thanks!
nice dude, good video. it was simple but tld me everything i need to know, ive had one of these locks i lost the combination to, now i got it open and can use it again. thanks
do you have a lock like exactly like this one or one similar? most people mess up when trying to find the combination on back once the pin is all the way in. it will work if you do it right. i promise!
RaymondHamby 5 hours ago
dude it didnt work
AwesomeKingSlayer1 9 hours ago
was that Elvis ????
gdrobbo 4 days ago
was that Elvis ???????????
gdrobbo 4 days ago
once you get ur pin through all the holes the combination should be on the back you then have to flip around the numbers to the front. you might just be putting in the wrong combination trythe ones around the others
RaymondHamby 4 days ago
My pin goes through all numbers perfectly but when i flip over for number things nothing works
Boy4Hell64 5 days ago
what a conveniently placed hole... and those bicycle U-locks were mystically made to perfectly receive a BIC pen and get unlocked easily :D i sometimes wonder whether there really is some niche of people (elites) who create these technologies and systems and leave a secret flaw/hole for themselves, like secret ATM combinations, etc etc just so they can always rely on their creations whenever they needed them :D :D
DatBeDaSheit 1 week ago
Did not work. Will try with different bobby-pin.
ragingbullhcwf 1 month ago
@ragingbullhcwf thanks for you comment. i promise you that if you use the correct size bobby pin this will work. your pin was probably too wide to fall in between the tumblers.
RaymondHamby 1 month ago
@RaymondHamby I used a paper clip and safety pin. Could not find bobby pin that would fit. Got all the way down to the last tumbler, but lock would not open. I even went to a locksmith who played with it for a few minutes and he wanted to charge me $25 to open it.
ragingbullhcwf 1 month ago
@RaymondHamby if you have a walmart in NJ then you should be able to find the right size pins there.
RaymondHamby 1 month ago
I went to 2 drug stores looking for bobby pins that would fit. CVS and Walgreens all had bobby pins that were too thick. Hard to get the right bobby pin in NJ.
ragingbullhcwf 1 month ago
I accualy found this lock on the ground and thanks to you i can use it thnks man
tpagan16 2 months ago
@tpagan16 glad i could help!
RaymondHamby 2 months ago
Awesome worked perfectly thanks!
Mark37251 2 months ago
@Mark37251 you are very welcome. please check out my other tutoirals i think you will like them. thanks for your view and thanks for your comment!!
RaymondHamby 2 months ago
zone locks do work
97hl11 3 months ago
Thank you soooo much! This method also works when the shackle is stuck on the other side! :D Man, I'm so glad that I didn't through it away!
bloominglove27 3 months ago
thank you so much! i have had this same lock 4 like 3 years and havent been able to figure out the combination but this worked perfect!
joecool248 3 months ago
@mralex9933 no, i know of a couple other brand locks this pick works on. it has to have a big enough slot to fit a bobby pin in.
RaymondHamby 3 months ago
can u do one for a master number lock
heathcom2 3 months ago
@heathcom2 yes ill work on getting that video up soon, thanks for your comment!
RaymondHamby 3 months ago
@RaymondHamby thanks hope to see it soon.
heathcom2 3 months ago
@heathcom2 if you subscribe to my channel you will be notified as soon as i upload it
RaymondHamby 3 months ago
WOW IT REALLY WORKED!!!!!!!!!! THANNKSS
davidhaprov1 3 months ago
@davidhaprov1 of course it worked lol. i wouldnt make a video if it didnt. i like to help people. please check out my other tutorial videos.
RaymondHamby 3 months ago
OMG THANK YOU!!!!!! :D
airninja35 3 months ago
@airninja35 you are very welcome. glad i could help.
RaymondHamby 3 months ago
you sound like mr maky of south park :P
jakeee010 3 months ago
Greaat, thanks! Lol
ntatola 4 months ago
@ntatola you are weclome please check out my other tutorial videos if you'd like thanks
RaymondHamby 4 months ago
@CoalMyn thanks alot i appreciate it!!!
RaymondHamby 4 months ago
Damn!!! Thanks soo much. I messed up my
Lock and didn't know the combo so
Thanks soo much. How did u figure this out?!?!?!?
BieberBabe0000 5 months ago
This has been flagged as spam show
i think its like shit my lock dont werk that way i reckon i from down souf her in new york!
christopher19691 5 months ago
i think its like shit my lock dont werk that way i reckon i from down souf her in new york
christopher19691 5 months ago
i think it's like shit
christopher19691 5 months ago
Thanks, Now I know how to protect my lock!
imanoob4 6 months ago
@imanoob4 you are very welcome, glad i could help. check out my other tutorials including how to pick a car door!
RaymondHamby 6 months ago
Does this work if it's locked with the bar not in position like you had it at the start?
SurfwaxMax 6 months ago
Awesome Saved me from getting a new lock. Thanks
doughhead159 6 months ago
@doughhead159 you are very welcome glad i could help, please check out my other tutorials including how to pick a car lock if you lock your keys in it
RaymondHamby 6 months ago
@RaymondHamby can u use something else 2 unlock it
MrSparten17 6 months ago
hay i fot a smaller bobby pin and i tried it and it work thanks very much but i did take a few tries but it work thanks
Hotpeppers111 6 months ago
@Hotpeppers111 just glad i coul help you get it open. please check out my other tutorials!!!
RaymondHamby 6 months ago
i am using a big bobby pin i well go to the store and by smallers 1s
Hotpeppers111 6 months ago
@Hotpeppers111 yes that will probably help you out because the tumblers hole is about the same size as the bobby pin i was using so the bigger ones shouldnt work plus like i said be sure to remove the plastic that covers the end.
RaymondHamby 6 months ago
it the same lock but the bobby pin wont go in
Hotpeppers111 7 months ago
@Hotpeppers111 either your bobby pins is too large or you are not doing it correctly. be patient and jiggle the pin around as you spin the numbers it should go in you also have to take off the plastic on the ends of the bobby pin
RaymondHamby 6 months ago
it wont work for me can you help
Hotpeppers111 7 months ago
@Hotpeppers111 is your lock the same as mine. if not tell me wnhat kind it is. are you looking at the combination on the back of the lock and then spinning it to the front. which part are you stuck at?
RaymondHamby 7 months ago
Thanks man, saved me $12 for new lock!!
redrider112 7 months ago
@redrider112 youre very welcome glad i could help. if you havent already please favorite this video and give it a thumbs up. im trying to get my name out there and id appreciate your help. also please check out my other tutorial videos on my channel i think you will like them!! thanks alot!!!!!
RaymondHamby 7 months ago
why did you have to move the dials to 8037?
hitachimagicwandUK 7 months ago
@hitachimagicwandUK because that was the combination.go back and listen to the video when i say that the bobby oins doesnt actually unlock it but it gives the combination on back which was 8037 then just spin the lock around and put in 8037 and it unlocks.
RaymondHamby 7 months ago
Best number lock pick.
TheOneTheOnly1996yr 8 months ago
@TheOneTheOnly1996yr hey i really, really appreciate that comment. i do my best to make my tutorials easy to understand and follow. if you are interested i have others on my page if you want to check them out. thanks again!
RaymondHamby 8 months ago
Thank you so much for posting this! I thought I was going to have to buy a new lock. It took me a couple of tries but it works!
:-)
cutiepie1953 8 months ago
@cutiepie1953 well im glad my video could help you out. now u know if you turn the open lock and push it down you can then change the combination right. thanks for watching and commenting. i always appreciate it.
RaymondHamby 8 months ago
brilliant bro....it worked...I knew the combo was 0459...but still wouldnt open sigh....cut it off...that worked too....
but thanks, this was nice to know
kevinmeister1964 8 months ago
@kevinmeister1964 well im glad this helped you and im glad you enjoyed the video. i have alot of other tutorials coming soon. if you subscribe youll be updated when i upload them. please stay tuned. glad you enjoyed it
RaymondHamby 8 months ago
@RaymondHamby Could You help me I couldn't get it
Could i just give u a picture threw a email of all the sides and you could help me from there?
David363170 9 months ago
@David363170 sure you can email me the picture at raymondhamby@live.com be sure to send a picture of all four sides the top and bottom also if there is any serial number and brand please send pictures as well. it will help me figure out the specific type of lock it is and make it alot easier.
RaymondHamby 9 months ago
hey i have problem
I change my password and i forget it
It is pretty much the same one you have but it's green the problem is there is no space were the boby pen could fit in, can u reply asap i need it for school
David363170 9 months ago
@David363170 well there is probably a place for a bobby pin to fit if it is a number lock like this one or one similiar. it might not be in the same place but im sure there is one there. it might be on the bottom or sides. if there isnt and you are sure of this then you might be able totake something thin enough to slide between the numbers dials and u can either feel where the right spot is in the tumbler or you can pry it open slighty and actually see where it is and open it like that.
RaymondHamby 9 months ago
@David363170 Thats also my situation xD
TheMrVASCO 9 months ago
@TheMrVASCO if you send me pics of your lock i could probably help you get it unlocked
RaymondHamby 9 months ago
@RaymondHamby No thank you i ask my school buddy and he unlocked it for 1$ :) But thank you for posting this videos,u got to make more :)
TheMrVASCO 8 months ago
@TheMrVASCO well youre welcome im glad you liked the video and yes i am posting more this week.
RaymondHamby 8 months ago
Wow, that's even lower security than the masterlock equivalent!
inverseactuality 10 months ago
@inverseactuality i agree, actually if you knew how easily most locks can be broken into you wouldnt feel so safe putiing them on there.
RaymondHamby 10 months ago
@RaymondHamby
I know, picking key locks seems easy with the right tools, and locks like these I found at school and broke into them in a matter of seconds with no prior knowledge on how to brake into them. With locks like these all you need to do is pull on it and feel for any irregularities and you can usually get them open. I can't get mine closed though. I changed the password and scrambled it to show I could open it, then messed up changing it back and can't close it.
inverseactuality 10 months ago
@inverseactuality hey thanks for the responses and comments. its not only pad lock or number locks there isnt much of anything i cant break into including house doors ,windows cars etc. there isnt any car that i have found yet that i cant get into. now i never use my talents for anything illegal and never would but i use them to bet peoples keys out of their cars if they lock them in there or something like that. i plan on making some videos or other various ways to get keys out of a car.
RaymondHamby 10 months ago
@RaymondHamby
You're welcome. I'm hoping to learn how to break into all types of locks, but like you, not for illegal purposes. I'm hoping to learn all the flaws of locks so I can make a non electric lock that can't be broken in to without physically breaking the lock.
inverseactuality 10 months ago
@inverseactuality hey thats a great idea, but what would be the locking mechanism. most of the flaws in locks are the pins and tumblers there is usually an access point to reach these things so u would have to figure a way around this. hell i can pick a masterkey poad lock with a coke can. also making a video on how to do that. i also manufacture my own lock picks and will make a tutorial on that as well so please stay tuned
RaymondHamby 9 months ago
HELP! My lock got locked at the place you change your combination. Does this technique still work?
ItsOver90000000 10 months ago
@ItsOver90000000 yes this technique should still work with your problem. just take your time and find the openings in the cylinders and you'll be fine
RaymondHamby 10 months ago
I was trying to shim the wheel for the flat spot... But you video worked out great! Thanks..
tom98277 1 year ago
@tom98277 hey no problem im glad i could help you out! if you get a chance please check out my other tutorial videos and be on the lookout for more videos. please subscribe if you find my tutorials helpful. also check out my main main if you like comedy video at raymondhamby2424 thanks!
RaymondHamby 1 year ago
Thanks. I was being funny and changed the combo. i thought i could get it real easy as I did on a lock of same type ,but cheap.
MrBob1190 1 year ago
awesome video dude this actually helped me get mine open after several months. great tutorials onyour channel!
keithhamby24 1 year ago
nice dude, good video. it was simple but tld me everything i need to know, ive had one of these locks i lost the combination to, now i got it open and can use it again. thanks
flatbrokefilmz 1 year ago
nice job, seems simple enough good tutorial. im gonna try this one ivce also checked out your other videos nice job on them also!!!
RaymondHamby2424 1 year ago