2004 2500 CHEVY TRUCK ON TRACTOR TIRES STUCK DEEP

[billbo89able]

thumbs up for ford!

[todie24]

need a diesel in that bitch 6.6 dirtymax baby

[chrisrgivens]

how big of a tire can you drive on the street with because i wanna put something BIG on my truck but i dont want to get pulled over every time i drive it

[JTarver420]

@chrisrgivens Im really not sure. as long as its dot approved your good on tires size like a 54 bogger is approved but most of it has to do with how high your headlight are and bumber

[chrisrgivens]

@JTarver420 thanks... i think im gonna do a 40 something after i do the 6in lift and do some work to the motor so it dont run like a ford pinto without the v8 lol

[stoker20]

Carbon footprint check. Your exhaust system sounds like it has been modified. You may be harming the environment . You should be using a go devil I think it's called for transportation in that area. Did you know that Cyprus is the wood eternal? Maybe you need to be further east for Cyprus??? I did see a full auto tec 22 that would be good for when you weren't bogging.

[anonuhmys]

Do you have enough tags?

[JTarver420]

@anonuhmys Hmmm. idk do i?  think thats all it would let me!! lol

[anonuhmys]

@JTarver420 Either way your truck is still badass haha

[cokewhitechevy]

What do you do about your air filter box so that mud and water don't get in? How much are those axles?

[JTarver420]

@cokewhitechevy about 1000 for the axles. and i try to set tall enough so water cant reach. have had some get up there but not much yet. guesss its time to snorkel it

[hallsy154]

that was going deep...awesome truck...huge tires...thumbs up!!!

[steveandant]

the hell with deuce rears man, dana 60 and a 14 bolt, get the biggers axles made and a trak loc in the from dana 60 n ull be unstopable

[JTarver420]

@steveandant Not as strong and more expensive!!! if i was to drive it on the highway i would but im very rough on this truck and running big tires so i need all the strengh i can get, and yes there close in strenth upgraded but if i up grade the rocks then there unstopable

[BLACKLACDTS]

hello viewers, wouldnt you like to see this awsome mud truck be even nastier? well it could be! he needs a cam,stall and any gm ls series performance parts you have laying around. if you have a big cam,headers,valve spring,rockers,intakes or 3000+rpm stall converters for gm's 6.0 lq9 you would like to DONATE to this awsome cause it would be appreciated. think like this you could build a mud truck! help him get 500+ horsepower to sling the mud for us viewers! message him if you can help. thanks.

[JTarver420]

@BLACKLACDTS LMAO!!!!! That was awesome!!  Tell ya what ill throw in for free if someone wants to donate!! Ill donate all my free time and labor services FOR FREE!!! Yes thats right FREE!!! lol

[BLACKLACDTS]

@JTarver420 awsome!

[oniichanrikku]

I think I won't gonna let you drive my Truck if I had one. ;-)

[JTarver420]

@oniichanrikku lol!! i only drive mine that way!!! and thats cause i have to fix it lol

[BLACKLACDTS]

gotta give props on that. that hole was deep! water was in the bed!!!

[JTarver420]

@BLACKLACDTS IT WAS A BLAST. HAD THAT BABY FLOATING!!

[promotorsports]

Sometimes its coming out of the hole thats the hardest part. Not the hole itself. Bad ass truck man.

[JTarver420]

@promotorsports that aint no lie. coming up that huge bank on the other side was bad

[sargentghost24]

are those good year tractor tires and are they a good set i might make a truck dont know yet if im gonna put tractor tires prob boggers

[JTarver420]

@sargentghost24 no they are BKT. there good for sure tho. like 53 inch so im right there with the 54 boggers. but hella cheaper

[phill903]

Nice truck !

[JTarver420]

@phill903 thanks. nice hole to huh lol

[rekjavicxxx]

You were givin it hell on that hole man!!! Looked good!! Can't believe that thing didn't get uber hot on ya!

I did see Frodo in there doin work too ;)

[rekjavicxxx]

You were givin it hell on that hole man!!! Looked good!! Can't believe that thing didn't get uber hot on ya!

I did see Frodo in there doin work too ;)

[JTarver420]

@rekjavicxxx it did get warm. bout 220. frodo was posing lol ya seen that?

[rekjavicxxx]

@JTarver420 Just frickin straddlin those ruts! Gotta do whatever it takes to get that shot. ;)

[JTarver420]

@rekjavicxxx AT LEAST WE DIDNT SEE OR GET YOU FALLING IN A HOLE

[rubypuppy7]

nice truck!

[JTarver420]

@rubypuppy7 thanks

[ryesram]

That is fucking one awesome rig man. haha beauty!!!

[JTarver420]

@ryesram thanks!! it was pretty beat up by the end of the day :(

[kd4ysi]

that was a baad hole time for a winch then you couldve pulled the other stuck truck out great viedo bro

[JTarver420]

@kd4ysi yeah. could have used one for sure. we did use a winch on a samari to pull him out though lol

[kowal789]

damn thats deep water, id say your clearence is atleast 4 and a half to 5 feet?

[JTarver420]

@kowal789 That would be correct.  lol pretty deep for sure

[ttarver24]

Got to love that reverse water wheelie!!!!!

[JTarver420]

@ttarver24 THATS DOING WORK THERE!!! 

[doctorluigi]

@JTarver420 i dont get it, whats the point, seems like he shoulda gone around the hole?

[JTarver420]

@doctorluigi really?  that is the point lol. everyone else tried it, i had to see if i could make it!! whats the point in building a big 4wheel drive if you dont use it! its not a show truck just for looks. iT HAS A PURPOSE! LOL

[JTarver420]

@ttarver24 NEED TO PUT MORE AIR IN THE FRONT AND ID MADE IT

[chevydiesel350015]

how much hp and tq you think your putting out

[JTarver420]

@chevydiesel350015 Figure between 425-450hp and somewhere around that on Tq

[chevydiesel350015]

@JTarver420 kool

[JTarver420]

@chevydiesel350015 if i could find a used profab and get like 2.50 to 1 ratio i could turn them just right then. wouldnt need any more hp.

[BLACKLACDTS]

@JTarver420 or you could cam it and have plenty of horsepower!!! lol i know i keep tellin you to cam it and im goin to till you do it! lol

[JTarver420]

@BLACKLACDTS I want to cam it so bad!!!! lol if all works out right it might get a cam and stall around nov

[BLACKLACDTS]

@JTarver420 i hope so you will see a huge difference!

[JTarver420]

@BLACKLACDTS yeah so will my truck!!  hope it will hold together!! lol gotta try to find out lol

[BLACKLACDTS]

@JTarver420 yes sir!

[JTarver420]

@BLACKLACDTS now if i could just get somebody to sponser me a cam and all the goodies to go with it me and you would both be happy lol i can dream!!

[BLACKLACDTS]

@JTarver420 lets run a campaign to get the viewers to donate or buy your cam and the other parts you will need to make it a pure 500+hp beast!

[JTarver420]

@BLACKLACDTS MAN IM ON BOARD WITH THAT!!!! LOL

[BLACKLACDTS]

@JTarver420 its on!

[JTarver420]

@BLACKLACDTS you wasnt lieing!! lol im still laughing thanks man

[chevydiesel350015]

@JTarver420 yeah gearing help's alot

[JTarver420]

@chevydiesel350015 less strain on my trans and motor for sure!!

[beastlydumass]

well ya tried but dam so close.

[JTarver420]

@beastlydumass it was fun. i was moving forward more and more but started overheating so had to quit.

[racing16]

I thought you going to get out of that one, Looks like the ruts were a tad to deep?? Thanks for posting.

[JTarver420]

@racing16 I was to steep of a bank on the other side! just keeps thinking i was gonna pull up it.

[JTarver420]

@racing16 IT was to steep*