Super3boy's Tenth Blender Tutorial(UV Mapping)

[209hii]

how can you get this to work when you run the game engine? (P)

[MW2BoosterControl]

Is this forum this up?

[meshtra]

Fuck yeah, Archer avatar!

[dactnl]

Thanks super3Boy

[LSikina]

I found this v=b8vr6E5wxts tutorial to be much better for particles.

[dylloop]

hey u still have thos dvds?

[isorSOT]

im not have a UV facce select mode,im have a Blender 3D 2.49

[TechGuyTuts]

@isorSOT all you have to do is go into edit mode an press a then u

[InfiniteMomentStudio]

here's my question...

what if you don't have a "UV face select" mode?

I don't have on on my version of blender... and its not an old version

[bootchez]

Skip to 2:50 to start after time-wasting adverts.

[Ruinpheonix]

Why doesn't mine have the uv face selector thingy?

[DraigGwym]

Good tutes, But I have to agree with

Gr1mmReap3rT2's earlier comment. PErhaps just a clickable annotation to the beginning and/or end of your vids as a redirect would be less.. Irksome.

[benny21003]

need help with forum, Nystic 2.0.

[petcarlson]

over half of the Entire video is you saying nystic nystic nystic!

please consider shortening your advertisement time

[perilosity]

begins with 2:45 of promotion, leaving 3:33 for tutorial, which itself is clumsy and contains very little in the way of help -- just the most trivial possible use of UV mapping. you wasted my time.

[Ras902]

Yeah, i did the updated instructions and can see my pic when im editing.. but when i render the pic, the imagine i put on a face doesnt show.. i made sure theres light on it and everything. what the flip is happening?

[elobiretv]

your site looks shit, its just the default forum design

[RazAndBullidom]

Why don't i have UV face select? This is so irritating!

[elobiretv]

@RazAndBullidom click the anotation at the begining of the video, it shows you what to do now blender removed it.

[elobiretv]

stop advertising your site!

[skarmflames]

the uv tool is not there help

[kingdomkey1412]

can you do this on planes with more complex mapping?

[liveordie200]

well, everybody knows that 100,000 views is a great way to advertise. we all would do it, but dude, you should put them at the end so we could save our time and yours.

[themorganvideos]

uv face select isnt there!!! but nice tuts up till now

[masorex]

yea... this isnt quite working out for me... i made a sword and i did what u said but nooothing

[FreakFixtional]

Don't see uv face select, this is a piece of crap

[sketcherskt]

i try going to the uvface select and its not there someone please send me a messege telling me why and how to fix it

[Fraud3354]

is this the same as baking?

[cb2198]

"HELLO BLENDER FRIENDS"

That makes me lol each time. Thanks for the tutorials though.

[TheBitterTaste]

When I go to find UV Face Select isn't there... just some other modes he didn't show, help?

[MajorADDStudios]

@TheBitterTaste if u read da annotation things changed 4 blender 2.49 go to his new tutorial

[Shakespeare1612]

@MajorADDStudios The new tutorials are on blender 2.5 though and that version is still in Alpha testing. Can someone give a quick tip about what to do in Blender 2.295 to accomplish this step? I'm stuck too.

[jordanpasek]

wtf, the link 404ed on me

[MrHundred2]

Kid.

Get to the point and show us what we want.

Advertisments should be placed at the end of the video.

[measless]

@MrHundred2 thanks for being an ass hole

skip it, dont complain

[jordanpasek]

@MrHundred2

youre getting a free tutorial...dont be a dick

[Horia747]

@mrhundred2 be nice to the guy

[TheInterViewersClub]

You sound like you have down syndrom

[MaykelKapersky]

he sound like gay

[TheTrueYellowfox]

@Mitch300mitch:

No, the dvd's aren't free. I didn't listen in this one, but I know in the last video he mentioned that the dvd's would be for sale for about $20 each, and that they'd be long, much more in-depth tutorials.

[tehnoobguy1]

WTF!?

There is a topic in the video which was created on sat 03 november, but the vid is uploaded one day before that!

lol.

[McLardopolis]

i have made an fps game, but parts of it keep changing so that the textures just turn white depending on the angle i am looking at them. this includes my gun:S

oh yeah, btw, i have tried shadeless, different textures, different light positioning, and adding and removing the material. please tell me what i am doing wrong!!!!

[Nkwel2805]

well just click on Edit mode instead "UV Face select".. its kinda same shit

<3

[NCWEntertainment]

Lol, I was trying to figure out how to do this on my own all day. I made a UAV and needed to add textures

[SchmitySoup]

hey could you do a tutorial on getting objects to react to each other (i.e. collisions particles moving out of the way of a solid object)

thanks

[Mitch300mitch]

are the dvds free?

[jimjamjahar]

Does this only work if you have a single shape?

[JoeTheWiltshire]

Umm... I can't find "UV Face select" in my version of blender... (249.2)

Help?

[ultrasuperbox]

the new blender doesnt have that option anymore, go to edit mode and press "U" and u can unwrap in any way u want

[TheNerdWord]

ya watch his 26th tutorial cuz it changes in version 2.46+

[SasaRakezic]

@JoeTheWiltshire

I have the same problem. I do not have that option. I was checking multiple times and there is no such an option. maybe this tutorial is on some older version and now some things are changed.

[Chipmunkool]

I am grateful for the tutorials, but I hope you have stopped doing that tongue/top of the mouth sticky sound! It is so annoying!

[IGNStryke]

what was website again? i forgot...

lol

[xXxAshersxXx]

is that sarcastic? lol

[miffsters]

just get to the tutorial already! 2mins 20 seconds were wasted just because of some nystic thing. i will only watch your tus if you leave nystic out of it. k?

[JoeTheWiltshire]

you make it sound like he needs you to watch it...

[SimGoode]

i have the same problem as tansvanio...

[SimGoode]

1 minute and 45 seconds were wasted during that video, advertising Nystic

[Subzero42690]

Don't freak out if you don't have uv select mode - just go to edit mode

[Esuld]

2:20 :)

[WWECWWECWWE]

Please stop advertising Nystic. Just focus on the tutorial.

[tansvanio]

when i go to the mods, UV face select doesnt appears...... :(

[Buttwipe24]

same here

[lioshenka]

You wasted 30% of the video on advertising the site... What's the point? Stop advertising your site everywhere it's useless. If your tuts are good, people will visit site anyway. Well, i won't cause I don't want to.

Oh, the tut doens't work. I will try again though.

[39Mick0tf2]

this tut is out of date. if your using a newer version of blender, there is a different way of UV unwrapping

[yesturtle]

so, how do keep lighting effects in game?

[sevenmeyou]

oh man i cant see the uv face select mode! is there a problem with 2.49a blender version?!

[RobbyStef]

same =/ i had 2.5 version and i could use UV face selection mode meh.. wonder why.

[SupaSexySnake287]

the reason hes having people go to the forum is because he doesnt want to get pelted with comments on youtube.

[KittenKiller]

First half of video=useless

[DMtactical]

it's his video, he can advertise if he wants to

[Mossman1223]

No he can't.

[cooldude89012]

hey guys reply to me my blender thing won't turn blue!

[bluey2244]

very helpful but start the tutorial in the first minute

[DaVietPride]

u are awesome

dude!

[liberteeen]

these have been useful but the ad at the front is getting longer and now lasts 2.48.

[DEADDUCKGAMES]

bro was on that website for i dont know how got damn long. and he aint exsplaining things good no more, its like hes just talking alot. wen he was younger he just start the video say open blender and tell you simple what to do but rite now i dont know who's going to teach me shit. DAMN

[Razingozalidahna]

He's name is Bobby

[Swedtwo2]

for anyone having trouble with new version it is "edit mode" now...i think

[freakinannoying]

in that drop down menu where you select "UV face select". I dont get that option. i get everything but, but no "uv Face select"

[nerodmc4dante]

it doesnt work on my blender, im using the newwest version and i followed the steps on your latter tutorials, came back here opened the image in uv editing. But it still didnt work.

[Razingozalidahna]

UV face select dosn't exist in the new version how do i do?

[libaconil]

Super3Boy = The Beast of Blender Seriously he taught me everything i know.

[Littledude514]

I agree!

[hi5534]

word of advice, to play the game with textures, press instead of shift z, and rendering, press alt+z. you'll see the textures on the model. and the uv face select wont really work, so under editing (F9), theres three buttons, sticky, UV TEXTURE ---> add, then vertex color. add the uv texture, then folllow the vid :).  hope that helps

[hi5534]

also, run the game while in the alt+z format to play with the texture.

[lanocondo]

WoW thanks!! xD

This really helped me...i think learning how to apply textures to ur models is what modeling is really about

[mrRa012]

half of the video is nonsense.....

[hi5534]

how do u get textures to show up in the game engine???

[dared111]

This isnt really UV mapping, you've marked no seams.

[evolution199331]

2:49 is when it starts

[Littledude514]

Thank YOU! (There's no sarcasm in this comment, btw) :)

[monkeybro10]

2 minutes of every tutorial is about the freakin forums!

[wolflive18]

Thx super boy :D

[lukeskywalker7878]

how do you get uv face select??

[you2besux]

Comment There does not seem to be a "UV Face Select" mode in blender 2.46 - There is a face select mode in 2.46+, but, first go to edit mode, than find the small triangle icon in your window's toolbar, hovering over it will give you the tooltip: "Face Select Mode". you can also use the shortcut CTRL+TAB+3KEY in edit mode. (The default mode is vertex mode, the four dots icon)

[hi5534]

you dont, press F9, then under sticky will say add uv texture.

[Reuben961]

vid start at 2:40

[andycandyandy]

I cant find it either

[lavamax1]

same here

[boredsilly11]

yeah, right now, im at nystic 2.0 and i cant find uv mapping tutorial

[Remscar]

I cant go to the UV face select, its not there

[holycow2450]

go into edit mode instead. its the same thing.

[bathoids]

how do you get it to work in the game engine

[bathoids]

it worked so.....SHAMON

[DylanGaut]

Ive been having trouble lately with this and for some reason the "UV Face Select" isnt there. can you help me out a bit?

[aLaSdAiRh01620]

it was rmoved in the new rersion of blander. instead, go into edit more and press the 'u' key then select the unwrap button.

[SuNJay8]

it works when i render but how do u get the texture to show up when u test game?

[hem5001]

YES, THANK YOU!!!

i couldent find any bloody thing about this BLODDY thing im doing, similer to this

THANK YOU SO BLODDY MUCH!!!

[wwwMisCompanerosNet]

No; he does not have avalability on Nystic anymore; never replies any question.

He is very good but had not replied in months.

[super3boy]

800 messages in my inbox, and 100 posts a day is a little hard to keep up with. Sorry...

[wowandrew94]

OMG u knw how 2 reply !!!!! lol jokz your bril

[BringerOfTheTruth]

Nice tutorial but it's simply impossible to find it on your site, also when you search. So it's hard to get hands on the texture, maybe a direct link to it would be better

[zukalop]

I have Blender 2.48 and I chose SR;5-Scripting but I can't chose UV face select mode. Plz help.

[theRedRage]

That option is no longer available. What I do is enter "texture paint mode", and then "enter edit mode", afterwards I would use "face select mode" (Ctrl + TAB + 3).

I don't think that is the "official" way, but it does the trick.

[zvxqykhg]

yeah the other way doesnt work for me. this way does so thanks

[zaneski13]

how would i texture something really complex. I modeled a tree that has over 10000 faces. Some help please

[Shadowplight]

ok i did etherything on this tutorial and on the updated tutorial, but only when i render my image i can see the texture on the cube, when not rendered it remains grey. (I used my own png texture) Just wondering if anyone knew how to solve this prob.

[Sonow21]

On the newer version of Blender, it doesn't have the UV Fac Select when you go to the modes.

Where could it be?

[exelto111]

you have to use editmode instead =)

[assevose]

Sorry for asking but can any of you guys help me?

i desperatly need uv mapping and texture of a Ocarina(flute from zelda kind of}

i need it to a project im working on.

pm me if willing to help:3

[Imsobored2143]

Umm i cant find the texture could u give me the link to it?

[Grishnahk4]

Wonderful tutorial. Thanks so much!

I am making a 3D game with C++ using DX 9. I am using blender to make all of my meshes and exporting them to .x files. Oftentimes the .x files dont export properly. Do you have any suggestions?

[trivium17rules]

Thanks for making the video, it really helped.

[sakitakono]

thank you.

[super3boy]

The link is in the video description

[KiwiBlaster516]

I have a problem with this. when I export the model and open it in another program, the texture does not appear. This happens 95% of the time.

[josh327115]

once again never mind lol

srry, i found it

[josh327115]

help!

when i type in "UV Mapping Tutorial" in the search bar, it doesnt come up?

whut should i do?

[tracybrauer]

hey dude i have a question....im trying to make a suit for my person ( im gonna post a video soon ) and for some odd reason its not quite working... i made a new layer, duplicated my guy, and cut off the hands feet and head.... now what? PLEASE HELP ME OUT IF U KNOW ANYTHING ON THAT!! TX good tut!! 5*

[bboyrughbrn]

there is no uv face select option to choose from..is there a shortcut for it?

[lenlen209]

Yea im havin the same problem. im using a MAC and i cant find the "uv face select" option.

[lenlen209]

oh nvm. i saw your link :)

[sctm81]

have the same problem. where's that link?

[Maxdamantus]

It's integrated into Edit Mode.. Go into edit mode, and then use face select mode (ctrl + tab), then unwrap as he just did (using U).

[jarre135]

why not just press split area?

[fightex12]

I got problem, i am making a map for my game.

but when i make house i want to make the entirier

i extrude and scale(+ or -) but when i texture or just press the texture tab i can se the first one(the inner wals)

i dont why that but something like that also happend to me when i was making a desert eagle, i coud see troo the gun

[guitarskatinwizard33]

it is a common error. In tab (EDIT MODE) select all vercities by hitting the a button twice or once idk. hit ctrl-n and reverse normals inside out hope this helps mail me if it does

[bandit8414]

hello blender friendzz... lol i luv it when u do tht

[fightex12]

how do you mirror objects??

[Xerld12]

hehe ur page helped me a lot. thnx ^^

[heritagesk8er]

I have the newest version of blender, and the uv face select mode isn't available. Is it still an option? if so, where is it?

[MusicalSilence207]

i have the same problem, :(

[GunSlinger1984]

You have to UVmap in Edit Mode and the face select mode is still an option in Edit Mode.

[Keinlicht]

hmm i can get it to render the texture but for some reason it doesn't exist in the modeling view. i don't know if that's just part of the latest update, or maybe i did something wrong?

[fightex12]

i have probem i am trying to texture an arm but it uses the image is to tight up.

i am not shure how to say that its use to often. how can i fix this

[ghosthunter64]

same here

[thomstanding]

hi ghosthunter64 :)

look on tutorial 26

super3boy did i update for it because its new so yh :)

[thebttfchannel]

dint work even if I renderd it

[fightex12]

oh god, i get toons of little images on my m4 rifle mode, need help.

[vegasguy1237]

How do you zoom in with CamStudio midway through the animation?

[Xaildin321]

I don't have UV/Face Select! DX Either they moved it or I just plain don't have it. T~T

[Elecrusher]

Notice the message at the start?

Go to edit mode, then: U > Unwrap, continue from there.

[DigitalDecadence]

UV/Face Select was moved in Blender 2.48a, it is now under the Edit mode, on the far right called Face Select (CTRL TAB 3 - shortcut).

[connibonni]

but shows in render

sry xD

[connibonni]

this damn crap wont work :(((((

doesn´t show the preview after opening the image

[casandramar]

im gonna start my own video game that i plan to sell soon im expecting to get it done by 2010 witch is good because im doing by my self so every little bit helps and your tutorials are great thanks !!!!!!

[HackerzInc]

I FOUND Another easy WAY!!!!

goto:

/watch?v=qj-S-AZyy9g&feature=r­elated

explains it proper and its very quick and easy!!

[HackerzInc]

Modeling view doesnt display texture

[hellocatfood]

U.V. Select is now integrated with Edit Mode (you get to that by pressing the tab button)

[hellocatfood]

Also, once in edit mode press U to bring up a menu to unwrap

[HackerzInc]

the pressing U part doesnt work

[HackerzInc]

NVM it workd

[HackerzInc]

thanks man

[jamesrhymer]

thanx I was lost

[laziruss]

No UV face select option.. :(

[Iwillkillyou35]

can someone kindly point me in the direction of uv face select? In the version I have and I believe many others have it is not in the same place as the video above.

[person0908]

where is the uv face select thing