I use the plug for the hose, plugged it in, and used the stock clamp to clamp it. So i don't hear anything coming out of the recirculation hose, that is weird though. Just call them up, they should be able to help you. let me know what they say because i am curious also.
I was reading up on the TurboXS's description for this BOV. I remember it saying something like it eliminates running rich, stalling even with the clutch down, and back-firing problems. Is this true? It won't mess with the MAF sensor or anything on a stock ECU map will it?
Rpm does drop down at times to almost a stalled position but it quickly adjusts, so it doesn't stall. You get the occassional drop at times, but no stalling that I have encountered. It does backfire though, a few times with a lot of pressure, but most of the time, only a little backfire occurs. It didn't throw any engine codes. Hope this helps.
If you remember the washers it came with? adjust it and tune it to your setting and liking. For example I have the same BOV as you and i have 4 Washers in there. And it's Perfect.
gfb response are much better sounding and have the same port location as stock,
hazmatsystem88 5 months ago
you hear a strange sound of the cancellation of the recirculation hose?
chaman10anos 2 years ago
I use the plug for the hose, plugged it in, and used the stock clamp to clamp it. So i don't hear anything coming out of the recirculation hose, that is weird though. Just call them up, they should be able to help you. let me know what they say because i am curious also.
gsrbooster 2 years ago
I just bought a ws08-rfl
I have a stock subaru wrx 08 2.5t
install everything perfect
I put the plug in the recirculation hose
I heard a strange noise like a buzz
is heard only when the hose is out of the valve
the hose is always clogged with the cover that you provide
this sound is this normal??
chaman10anos 2 years ago
You will have to contact TurboXS. I was the first to purchase this for the wrx08 and made a vid for them. I don't work for TurboXS. Good luck
gsrbooster 2 years ago
Just get more washers in there and you'll be fine :) i have the same BOV on a 2009 WRX.
Just put 4 in there. I have 4 in mine and it runs Perfect. :)
GonTheDino 2 years ago
I was reading up on the TurboXS's description for this BOV. I remember it saying something like it eliminates running rich, stalling even with the clutch down, and back-firing problems. Is this true? It won't mess with the MAF sensor or anything on a stock ECU map will it?
AlphaMagnum 3 years ago
Rpm does drop down at times to almost a stalled position but it quickly adjusts, so it doesn't stall. You get the occassional drop at times, but no stalling that I have encountered. It does backfire though, a few times with a lot of pressure, but most of the time, only a little backfire occurs. It didn't throw any engine codes. Hope this helps.
gsrbooster 3 years ago
If you remember the washers it came with? adjust it and tune it to your setting and liking. For example I have the same BOV as you and i have 4 Washers in there. And it's Perfect.
GonTheDino 2 years ago
the featured BOV is an RFL. what you are describing is the HYB.
jpa7578 3 years ago
delete your other video
reddevilracing 3 years ago
I know I didn't much like it either. Its gone!
gsrbooster 3 years ago
Does this XS kit just a bolt-on or mods are needed.
thank you for your help and it sounds great.
chacaloninho 3 years ago
TurobXS kit is bolt-ons and easy to install took about 5 minutes. I will probably make a video on how to install it. Good luck.
gsrbooster 3 years ago