hehe,I made a rebuild of my 2 stroke engine and it started on 4th try as the carb was empty and I was really damn surprised of it starting at all and ye it sounds like this when its cold,run it for like 5 min then take a tour and rev it up to max and shift(When its cold):) works great for me and then as i start to shift up to third gear it goes better already,i had to change the yet in the carb also to give it the proper ammount of gas:)Nice bike btw
the roller main bearings are notorios for play , take ignition cover off and grab a handfull of see if any play in , also check clutch basket for slack , ktm clutch baskets are noisy as ,, gl man
@goneriden9543 Its a notoruis problem known to the kx250. Have to go slow till it catches and then kick. Pain yes, problem depends. I wouldnt worry about it.
im 16 and almost 6ft should i get a 125 or a 250 i really wanna a 2stroke and not even close to being new witha 2stroke. I ride a yz80 and i need somethin bigger.
hey i just bought a 02 kx250 in a box ill post a vid soon i just wanna know how much was everything totla rebuild thats what im doin to mine i fount a kit at rocky mountain for 750.00 top and bottom end
Stuartb...I watched your video and have to say this is a normal sound...although it sounds abnorma. I had a 1996 KX250 and it was loud at the power valve...now have a 2005 KX250 and the power valve is insanely loud like your video sounds to me. The exact same rattly idle sound, then it fades away when you get on the gas. I have decided not to worry about it and just enjoy riding it. Thanks for the vid.
@GottaRoost I've got a 2005 sounds very similar, just had a total rebuild and my mate has one too all sound the same. The spring in the powervale snapped on mine and was very loud rattle,but I guess they just rattle being kawasaki's. Very powerfull though, loads more than a 250f or my mates YZ 250 if I can keep the front wheel down without the back spinning Ha Ha!
how'd she run after rebuild? i am doing complete rebuild, fatty pipe, powercore2 silencer, and boyessen power reeds and twin air air filter pretty excited for my parts to all come in so i can finish it
KIPS valve makes that noise on KDX machines. Perfectly normal on that bike. I just bought a 1991 KX250 with low hours and it sounds like that too. Hopefully just normal sound as JBlinky mentioned.
yes its definately the kips valve, having had a complete rebuild i'd assume its been decoked and hence is tapping, this is common and goes after a bit of carbon has built up again.
cant be a bearing as it had 100% new bearings top and bottom end, not just crank bearings but every bearing, this is the 1st start of it since the rebuild, totally cold, it sounds totally different not on camera,
@cody1011000 the main bairings sound knocky when a 2 stroke is cold.when the engine heats up the bearings expand and the noise goes away.I have had a few bikes and there all the same when cold.I have recently had a full rebuild on my 05 model KX and its the same when cold
@cody1011000 the main bairings sound knocky when a 2 stroke is cold.when the engine heats up the bearings expand and the noise goes away.I have had a few bikes and there all the same when cold.I have recently had a full rebuild on my 05 model KX and its the same when cold
haha nah i was taking the piss out of the dude that sed it cant be a kx coz its got a headlight, the backgrounds look good man, i got red on mine but mines a rm250
hey, i got a cr250r and I was thinking of making it road legal, is it hard to do, i hear theres a load of paperwork and tests? thanks olly also i bet its quick on the road!
why does it sound like somethin is bangin around? my 250 is the same way. is it jus the bike itself or is there somethin wrong?
615DWrek 3 weeks ago
sumhow kx is the bikes....
kauaibound96715 3 months ago
Where did you get the light from
mbdesign07 3 months ago
You do not start a fresh rebuild rev it a couple of times then shut it off ?!? Start it then ride it like you stole it !!!
MrRexBivouac 4 months ago
i hope thats not the ACTUAL first start... that is not how u break in you're rebuilt motor man
SkinnySkinch 5 months ago
hehe,I made a rebuild of my 2 stroke engine and it started on 4th try as the carb was empty and I was really damn surprised of it starting at all and ye it sounds like this when its cold,run it for like 5 min then take a tour and rev it up to max and shift(When its cold):) works great for me and then as i start to shift up to third gear it goes better already,i had to change the yet in the carb also to give it the proper ammount of gas:)Nice bike btw
TheChrisey 5 months ago
not bearings all kx's do it powervalve position's ride it like you stole it!!!
4thgearscratch 5 months ago
my kx sounds just like this its normal on a kx for some reason they make this sound, i have two of them and they both sound the same
TheKx250king 7 months ago
why the fuck do you have a light on it for lol
AweakenedKing 7 months ago
@AweakenedKing because its road legal and i can ride it at night!
stuartb1981 7 months ago 13
Why havent you got a number plate or a brake light then?
jellyking12345 7 months ago
@jellyking12345 maby it isnt registered yet?or maby the number plate is just coverd from the side
TheChrisey 5 months ago
It must be registered because he said that he rides at night and it is road legal.
I cant see a brake light or reg plate where it is supposed to be....
jellyking12345 5 months ago
was that the first start of the day? Seems like more smoke than normal.
10chadjordan01 9 months ago
Does it fart?
sweezat 10 months ago
Haha the back fender looks really long at the start until you realize it's just paint on the shed
suzukiholdenman 11 months ago
Nice bike man that almost exactly what im doing with mine as far as the rebuild, pipes, and reeds.
kawi2fifty 11 months ago
badass
baycitybandit84 1 year ago
the back fender looked huge at @0:01
bobliter58 1 year ago
hate to bust your guys bubble butt thats the power band valve slappin back and fourth a lil bit. no biggie
mufflerbearin 1 year ago
the roller main bearings are notorios for play , take ignition cover off and grab a handfull of see if any play in , also check clutch basket for slack , ktm clutch baskets are noisy as ,, gl man
katumaheaven 1 year ago
i have a 1997 kx250 when i kick the kickstarthard it doesnt grab, if i kick it really slow it catches what wrong please help
goneriden9543 1 year ago
@goneriden9543 Its a notoruis problem known to the kx250. Have to go slow till it catches and then kick. Pain yes, problem depends. I wouldnt worry about it.
hondareconer250 1 year ago
im jealous.
CreatureLikeGod 1 year ago
wat kinda lights? plz reply
XMOUS3YX 1 year ago
i got the 1985 model with renthal bars, uni air filter and a racing pipe that i dont know the make cuz it doesnt say it but ill have vids SOON
jean1marc 1 year ago
did you do the case bearings?
chrisross2343 1 year ago
im 16 and almost 6ft should i get a 125 or a 250 i really wanna a 2stroke and not even close to being new witha 2stroke. I ride a yz80 and i need somethin bigger.
yamahadirtrider24 1 year ago
awwww fuck this guy
DTATODAYify 1 year ago
hey i just bought a 02 kx250 in a box ill post a vid soon i just wanna know how much was everything totla rebuild thats what im doin to mine i fount a kit at rocky mountain for 750.00 top and bottom end
suzukirider388 1 year ago
Is there a way to get rid of that sound
willywonka685 1 year ago
those are the reeds making that clicking sound if his bearings are all brand new
carsnwomen91 1 year ago
does the boysen reeds make a difference?
Mrjohnnyjjj 1 year ago
@Mrjohnnyjjj get v force 3 reeds, adds alot more power
JerzEjuice 1 year ago
mine sounds the same way power valve noise! still runs fine
4thgearscratch 1 year ago
My bike sounds exactly like this too (1997 KX250), nothing is wrong with mine...
GRIM2594 1 year ago
Stuartb...I watched your video and have to say this is a normal sound...although it sounds abnorma. I had a 1996 KX250 and it was loud at the power valve...now have a 2005 KX250 and the power valve is insanely loud like your video sounds to me. The exact same rattly idle sound, then it fades away when you get on the gas. I have decided not to worry about it and just enjoy riding it. Thanks for the vid.
GottaRoost 1 year ago 7
@GottaRoost I believe you are correct. I have an 03 and has the same noise coming from the power valve, only when idling. pretty normal
2smokefinny 1 year ago
@GottaRoost I've got a 2005 sounds very similar, just had a total rebuild and my mate has one too all sound the same. The spring in the powervale snapped on mine and was very loud rattle,but I guess they just rattle being kawasaki's. Very powerfull though, loads more than a 250f or my mates YZ 250 if I can keep the front wheel down without the back spinning Ha Ha!
brize9224 1 year ago
@GottaRoost ya my kx has the same sound i dont really worry about it any more
TheKx250king 1 year ago
hey man u sell the bike yet if not where u live at man that is a beautiful bike
xjokerzx01 1 year ago
how'd she run after rebuild? i am doing complete rebuild, fatty pipe, powercore2 silencer, and boyessen power reeds and twin air air filter pretty excited for my parts to all come in so i can finish it
crf250rider6 1 year ago
thats a nice bike man! i like that its a 2 stroke bc 4 stroke sucks!!!
bjp523 1 year ago
lmao u broke the sound level ur camera could take nice bike man
snowman1692 1 year ago
KIPS valve makes that noise on KDX machines. Perfectly normal on that bike. I just bought a 1991 KX250 with low hours and it sounds like that too. Hopefully just normal sound as JBlinky mentioned.
Welesly77 1 year ago
yes its definately the kips valve, having had a complete rebuild i'd assume its been decoked and hence is tapping, this is common and goes after a bit of carbon has built up again.
robertgisthebest 1 year ago
even if there was new bearings in it if there not put in wright then they will knock like a bitch but i do no that it sounds diffrent in person
cody1011000 1 year ago
definatly all put in right, and crank balanced, i'll try and put a better video on, or see 1 of my riding videos it sounds different on there!
stuartb1981 1 year ago
@cody1011000 sounds like a kx, they all seem to have that slight knocking sound
duff1981 1 year ago
sounds like a bearing to mee
cody1011000 1 year ago
cant be a bearing as it had 100% new bearings top and bottom end, not just crank bearings but every bearing, this is the 1st start of it since the rebuild, totally cold, it sounds totally different not on camera,
stuartb1981 1 year ago
@cody1011000 the main bairings sound knocky when a 2 stroke is cold.when the engine heats up the bearings expand and the noise goes away
pateyboy81 1 year ago
@cody1011000 the main bairings sound knocky when a 2 stroke is cold.when the engine heats up the bearings expand and the noise goes away.I have had a few bikes and there all the same when cold.I have recently had a full rebuild on my 05 model KX and its the same when cold
pateyboy81 1 year ago
This has been flagged as spam show
@cody1011000 the main bairings sound knocky when a 2 stroke is cold.when the engine heats up the bearings expand and the noise goes away.I have had a few bikes and there all the same when cold.I have recently had a full rebuild on my 05 model KX and its the same when cold
pateyboy81 1 year ago
@cody1011000 I just bought a 2002 KX 250 2 stroke and it only has four tanks of gas through it and it has the same kind of knocking to it.
c23suzuki 1 year ago
how is it road legal
SkatinTheDream 2 years ago
Its fine. Sounds like a normal Kawi noise. You work on enough of them and you learn what's normal and what's not.
JBlinky67 2 years ago
maybe his choke was on or it was cold.
dat504rob 2 years ago
nice bike
bingbruv 2 years ago
guys check out my Jeremy McGrath STEEL ROOTS video on my channel
XxSUGARSHANE777 2 years ago
good vid, one of my all time fav's
larg3o 2 years ago
what year?
murphyz86 2 years ago
its a 1999
stuartb1981 2 years ago
how much for this bike m8 i want it
MrJoshb 2 years ago
very nice bike
sinbadinall 2 years ago
sounds like the crank rod bearing is knocking a bit....
nick123456789000 2 years ago
no its the camera, just had the bottom and top end rebuilt, i'll try and put a better video on using a different camera,
stuartb1981 2 years ago
fuck the whales save the 2 strokes
scoot346 2 years ago 67
@scoot346 best comment on you tube.
strtvndl3 1 year ago
@scoot346 fuckkkkkkk ya
ilikecasiespangler 1 year ago
@scoot346 hahah this maybe the only thing ive read that actually made me laugh. i appreciate your comment. beaner.
Tunkas1 1 year ago
wow urs kicks over easy do you have a fairly hot plug?
my kx is a bitch to kick over kinda like imagine braking ur foot by kicking down onto a solid metal bar lol
the plugs i use are pro circuit ones and are a bastard to start
stott737 2 years ago
youre bike looks very sharp man, and it looks mint with the headlight, i like it
bmaccr250 2 years ago
where did you get the head light nice bike by the way
dmaheryfz450 2 years ago
thanks! ebay think it was about £15 brand new
stuartb1981 2 years ago
what is called does it work off the cdi or what
dmaheryfz450 2 years ago
works off the voltage regulator would be better getting a new stator/coil but dont really ride it when its to dark! really easy to wire up too!
stuartb1981 2 years ago
ok thanks i must buy one
dmaheryfz450 2 years ago
@stuartb1981 yeah that headlight looks pretty cool nice bike keep them 2 strokes alive!!! :)
99yamahablaster 2 years ago
new engine...piston slap?
ibanezkid07 2 years ago
not piston slap just vibrations as i had camera set up on a dustbin i think check out my other vids might give you a better idea of the sound!
stuartb1981 2 years ago
cant be a kx250 bc it has a headlight and kx's dont have that.
CnRDirt 2 years ago
i put the head light on it, as its road legal
stuartb1981 2 years ago
haha retard! nah man it cant be a kx250 coz its got red background and kxs dont have that....?? nice bike dude
rookieperformance 2 years ago
thanks! i guess your taking the p%*s about the back grounds?
stuartb1981 2 years ago
haha nah i was taking the piss out of the dude that sed it cant be a kx coz its got a headlight, the backgrounds look good man, i got red on mine but mines a rm250
rookieperformance 2 years ago
haha yer think hes only 14, quite like the rm's, is it a carmicheal replica?
stuartb1981 2 years ago
sure is, ive just finished a full rebuild on it, i like it, but i do prefer the KX's
rookieperformance 2 years ago
yeeaaa #4
thats what i got
xgarr123 2 years ago
Sharp@!....long live the two stroke
Motorakid 2 years ago
hey, i got a cr250r and I was thinking of making it road legal, is it hard to do, i hear theres a load of paperwork and tests? thanks olly also i bet its quick on the road!
JANNOSPR 2 years ago
oh shit your from europe... ya canada has dumb ass rules for the road
alexshotto 2 years ago
i have a 04 honda cr 250, think i could make it street legal?
alexshotto 2 years ago
not sure to be honest, think it might be different over there, in uk its fairly easy to do and costs about £100
stuartb1981 2 years ago
get rid of all the bike and take a motocross bike then it would be sweet
odyprimus 2 years ago
it is a motocross bike, but its st up for enduro, and its street legal
stuartb1981 2 years ago
its got a oversized enduro tank, for long rides, and headlight as its road legal?
stuartb1981 2 years ago
get new tank and get rid of the headlight and the bike would be sweet
15dylan868 2 years ago