@QuadSpot no its not i race mx and i have a toomey pipe and i got 2nd place in a 2 hour harescramble and i can keep up with my other blaster that has a dmc alien and that pipe is low end
@masterhacker1989 oh yea everyone knows toomey is better as in proformance wise, I just wanted a little better tone than stock without makin it too fast for the trail that I rode in
i always wanted a quad and am saving up for a banshie. a blaster is too small for me and since i am overweight for my size, it couldnt move me an inch. if i remember its only a 200cc and i need at least a 300cc
dude how much did that set of tires cost i really need a new pair on my blaster those are like the perfect tires please reply cause if i hit one more pointy rock im screwed
i have a 1998 blaster it has the oil injection block off kit, new top end .10 over fmf pipe and power core 2, and stock reeds.
I need help jetting it, does anyone know what jets and clip positing. please let me know if you do. (I have a set of v-force reeds i'm debating on putting in but they arnt in to good of shape.)
the regular header is shorter then the sst header and the two wont interchange, I compared my aunts regular fatty header with my sst fatty and differnt lengths.
jetting is changing th size of the jets in thr carb. a jet in the carb is what the gas comes out of in the carb in order to mix with air to get the right air to fuel mixture(in a 2 strokes case, includes oil) jetting makes the engine run better smoother and idle better smoother, all with more power
you sir are a retard and dont know about engines. if you dont jet it, the engine will run extremely lean and the piston will burn and maybe more damage will happen. Please know about engines before you give advice, thank you.
not true, i have a fmf on my 93 blaster, not jetted, runs fine, ive had it on for a while to, i have a modded 95 blaster also, same exact pipes, the 95 is jetted, but the 93 runs and idles nice, but of course the 95 idles better cause of the race carb, check out my videos, i have both of them up there
the exhaust itself nahh... all the carb. work involved yea. I dont know how to do it, I only have a slight understanding of how it works and I dont do my carb. work either... I would screw it up
u should be able to get any four wheeler brake light as long as it mounts and has the same plugs for the wires, but try a four wheeler junk yard. good luck
Never can make a 1 cyl sound very good but gotta love that ping in the exhaust. Truthfully I'd never spend money on a new exhaust till it rotted out lol. And I'd never buy a Yamaha, No offence to you. Also I see a new york plate on it! NY FTW That's where I am.
dude........your blaster sounds great i have a 99 blatser with racing front fenders bills exhaust bored .70 over wiseco piston rings and hi compression gaskets it sound just about like urs
Well ive heard that Toomey's are just ridiculaously loud and sounds really good to me, so thats my top choice for sound. I really dont know any others besides FMF and Toomey, everything else ive heard is 4 stroke exhaust.
It sounds good, if you want it to run better start by getting rid of that unreliable oil pump, and mix it @ 32 to 1.I run maxima in my blaster it is very good oil.
Its not street legal, it has the plate and is registered so say if its stolen, its in the files of New York so that when its found, the police know whos it is. Although I do ride on the street, I havent had a cop nearby let alone chase me... yet.
Well you have to realize that some people enjoy a quieter sound , without losing much performance . If you want something that sounds completely obnoxious go check out the blaster kit that Toomey Racing makes , I have a toomey kit on my banshee and I'll be completely honest it's so loud with a 2 stroke it will make your ears bleed . I would definetely recommend the fmf products to the people who enjoy a more quiter performance upgrade .
Well I cant argue about it not being the loudest because I dont know what anything else sounds like. I just got FMF because it was relatively cheap and sounds good. I had no idea how much more proformance it was going to give me too.
That pipe right there. I get told all the time this can be heard up to 2 miles away. and im not exaggerating. My spark plug was shit in this video so its alot louder now.
@QuadSpot and the toomey perfroms perfect on the track to
1996YamahaBlaster 4 months ago
@QuadSpot no its not i race mx and i have a toomey pipe and i got 2nd place in a 2 hour harescramble and i can keep up with my other blaster that has a dmc alien and that pipe is low end
1996YamahaBlaster 4 months ago
Mine sounds the same
Ptowntiger11 8 months ago
Cold
Ptowntiger11 8 months ago
@QuadSpot well thats a better way to put it then I did... thats true
IOwn4Tractors 1 year ago
how much power does the pipe give you is it worth the money? I dont care about sound I mean sound is a plus but wha pipe gives the most power?
laxxmann4610 1 year ago
@laxxmann4610 its worth it compared to toomey which is a racing pipe and more expensive.
IOwn4Tractors 1 year ago
i was gonna get a blaster today but got scammed
offspringfanman96 1 year ago
FMF Is Crap, Toomey is the way to go, im not saying fmf is bad, but, there are better options
masterhacker1989 1 year ago
@masterhacker1989 oh yea everyone knows toomey is better as in proformance wise, I just wanted a little better tone than stock without makin it too fast for the trail that I rode in
IOwn4Tractors 1 year ago
@masterhacker1989 Uh, That makes no sense what you said "FMF is Crap, I'm not saying FMF is bad tho"...
Random1sGood 1 year ago
@masterhacker1989 "FMF is crap..." but then you say "Im not sayin FMF is bad..." so which is it?
MrSweetleaf92 1 year ago
@masterhacker1989 fmf is crap but its not bad?
501video501 1 year ago
@501video501 FMF is more for a good 2 stroke sound and a little proformance in my opinion
IOwn4Tractors 1 year ago
where in ny do u live?
dragon991060 1 year ago
@dragon991060 dont live in NY anymore, used to be in orange county.
IOwn4Tractors 1 year ago
pturn the choke off
flashes94 1 year ago
@flashes94 choke wasnt on
IOwn4Tractors 1 year ago
i always wanted a quad and am saving up for a banshie. a blaster is too small for me and since i am overweight for my size, it couldnt move me an inch. if i remember its only a 200cc and i need at least a 300cc
purepl416 1 year ago
how much hp will the fmf sst give
atyourservice666 2 years ago
couple plus
IOwn4Tractors 2 years ago
dude how much did that set of tires cost i really need a new pair on my blaster those are like the perfect tires please reply cause if i hit one more pointy rock im screwed
jacekmaes 2 years ago
a 260 is pretty lean
Tyler1Blaster 2 years ago
yea but I checked the spark plug after every ride and it burned perfectly.
IOwn4Tractors 2 years ago
mmmmk btw it sounds great!
Tyler1Blaster 2 years ago
290-300 should be fine... 300 if you get the reeds..... pilot should be fine
Tyler1Blaster 2 years ago
Can someone help me?
i have a 1998 blaster it has the oil injection block off kit, new top end .10 over fmf pipe and power core 2, and stock reeds.
I need help jetting it, does anyone know what jets and clip positing. please let me know if you do. (I have a set of v-force reeds i'm debating on putting in but they arnt in to good of shape.)
kasenut12 2 years ago
dude your blaster sounds like shit man im sorry but my blaster has the same pipe and every thing and it sound bad ass
jncomedy1 2 years ago
its just the recorder .....
crosser041091 2 years ago
what town in orange county. i lived in warwick
zackschannel 2 years ago
this is over in chester. now I live a little closer to warwick, just outta pine island, westtown.
IOwn4Tractors 2 years ago
where in ny are you from and the pipe sounds great
larbare123 2 years ago
in orange county
IOwn4Tractors 2 years ago
can you even get a sst pipe cuz nobody seems to have one?
barbecuedcat 2 years ago
yeaa they are hard to find
IOwn4Tractors 2 years ago
what echaust do u have fatty or sst
easkate09 2 years ago
sst
IOwn4Tractors 2 years ago
pipe sounds great but your cylinder is being drenched with oil...its not revving correctly
ctapp24 2 years ago
because it has the shitty oil injection on it gives it a rich mixture.
99yamahablaster 2 years ago
which is better for sound, the sst exhaust or just the gold series fatty pipe
zackp94 2 years ago
no idea, ive never heard both to compare
IOwn4Tractors 2 years ago
dont they sound cool ive gotta fmf Q on my sons it sounds brilliant
stainlessdodge 2 years ago
6 speed???
MRdirtnap09 2 years ago
yep
LilOG717 2 years ago
is 250
cristianjovan 2 years ago
no 200
LilOG717 2 years ago
do you have just the regular powercore 2 or the sst silencer? cuz i need to know if the sst header will fit with the powercore 2
ChrisNovis12345 2 years ago
the regular header is shorter then the sst header and the two wont interchange, I compared my aunts regular fatty header with my sst fatty and differnt lengths.
IOwn4Tractors 2 years ago
ok thank. sounds great by the way.
ChrisNovis12345 2 years ago
I put a 260 size jet in it and its been fine with me.
IOwn4Tractors 2 years ago
you should post this as a reply to ur no silencer vid so people can see its f****** awesome now
bandoboy32 3 years ago
how loud is it??
dalejrroxx 3 years ago
id say its about 90 dBs
IOwn4Tractors 3 years ago
aftermarket pipe usually move the powerband up givin you more power so you need more fuel
Mine is runing#300 main stock is #230
aremskij 3 years ago
most likely wont run because the carb will be set too lean and if it does then itll burn the liston from being so lean
IOwn4Tractors 3 years ago
hey wath is jettin i dont understand
alex0695 3 years ago
jetting is changing th size of the jets in thr carb. a jet in the carb is what the gas comes out of in the carb in order to mix with air to get the right air to fuel mixture(in a 2 strokes case, includes oil) jetting makes the engine run better smoother and idle better smoother, all with more power
IOwn4Tractors 3 years ago
i have a sst pip and power core 2 silencer on my blaster but my sounds a lot nicer then that. i dident have to re-jet my blaster
skippym38 3 years ago
dude you have to so it runs right.
IOwn4Tractors 3 years ago
you dont have to jet it thats just to get maximum power out of the pipe. jetting it just makes it easier for the bike to over heat and blow up.
3ckoTF 3 years ago
you sir are a retard and dont know about engines. if you dont jet it, the engine will run extremely lean and the piston will burn and maybe more damage will happen. Please know about engines before you give advice, thank you.
IOwn4Tractors 3 years ago
not true, i have a fmf on my 93 blaster, not jetted, runs fine, ive had it on for a while to, i have a modded 95 blaster also, same exact pipes, the 95 is jetted, but the 93 runs and idles nice, but of course the 95 idles better cause of the race carb, check out my videos, i have both of them up there
blastermaster515 3 years ago
what silencer do you have on it?
ChrisNovis12345 3 years ago
FMF turbinecore 2 sst version
IOwn4Tractors 3 years ago
im kind of new to quads and still learning but want to do the work myself, is it hard to change it?
vaca129 3 years ago
the exhaust itself nahh... all the carb. work involved yea. I dont know how to do it, I only have a slight understanding of how it works and I dont do my carb. work either... I would screw it up
IOwn4Tractors 3 years ago
do you have to re-jet all quads when you get them a new pipe?
vaca129 3 years ago
Yes. You change the air to fuel mixture when you put an aftermarket exhaust on or an aftermarket air filter on too.
IOwn4Tractors 3 years ago
i got the fmf gold series sst for mine
blindskater200 3 years ago
aint a blaster two stroke.plus is that a fatty or.....???
jameshonda95 3 years ago
yessir the blaster is a 2 stroke. yea its a fatty too
IOwn4Tractors 3 years ago
were did u buy ur brake light i need one 4 riding at wayne national forest plz reply thx
gh3jglosser 3 years ago
umm dude, I didnt buy one, that was the stock one. I smashed it out anyways so I basically did the opposite of buy one haha
IOwn4Tractors 3 years ago
u should be able to get any four wheeler brake light as long as it mounts and has the same plugs for the wires, but try a four wheeler junk yard. good luck
alburtisfirefighter 3 years ago
go on the yamaha part website itll prob be like 20 bucks
XMOUS3YX 3 years ago
does ur turbinecore make smoke rings
HONDAxREDxRIDER 3 years ago
umm not anymroe hahaha
IOwn4Tractors 3 years ago
my uncle has a 2001 Yamaha blaster and just put and fmf fatty on it and it sounds wicked man just like yours
dr00andrew 3 years ago
why is it like revving out it seems like
joeldude76 3 years ago
Fouled out spark plug
IOwn4Tractors 3 years ago
yo what u got on there i know the sst pipe but what about the orther halfe
outofmyway2 3 years ago
Ohh the silencer then... thats a turbinecore 2(sst)
IOwn4Tractors 3 years ago
Wow sounds good just liek my blaster(Check the videos)
tylerdeline 3 years ago
sounds good i have the same pipe check out my video.......
01Blaster 3 years ago
Never can make a 1 cyl sound very good but gotta love that ping in the exhaust. Truthfully I'd never spend money on a new exhaust till it rotted out lol. And I'd never buy a Yamaha, No offence to you. Also I see a new york plate on it! NY FTW That's where I am.
krankiev 3 years ago
I wont buy another yamaha but that honda 200es is close to rotted out, but that needs some engine work done before I get an exhaust.
IOwn4Tractors 3 years ago
Truthfully' on the Honda I;d weld up the rusty parts and overhaul the engine before buying a yamaha lol if ur gonna buy foreign stuff get honda.
krankiev 3 years ago
dude........your blaster sounds great i have a 99 blatser with racing front fenders bills exhaust bored .70 over wiseco piston rings and hi compression gaskets it sound just about like urs
blasterking1 3 years ago
lrd pipes too
apatheticaustin 3 years ago
Also them too, but I dont know anyone around here with them so I dont have a clue about them haa
IOwn4Tractors 3 years ago
am looking for more sound then performance
so what pipe shood i go for?
jhdhju 4 years ago
Well ive heard that Toomey's are just ridiculaously loud and sounds really good to me, so thats my top choice for sound. I really dont know any others besides FMF and Toomey, everything else ive heard is 4 stroke exhaust.
IOwn4Tractors 4 years ago
you could go with FMF,Procircuit,DG,Toomey,and Dyno port, ad LRD
motoman2011 3 years ago
fuckin right man im gettin one of those for my blaster after all this snow is gone lol
scotterinsam 4 years ago
It sounds good, if you want it to run better start by getting rid of that unreliable oil pump, and mix it @ 32 to 1.I run maxima in my blaster it is very good oil.
wofferman15 4 years ago
I just want it to run right as of right now. But if it says relible by summer, then i'll do that or something.
IOwn4Tractors 4 years ago
What kinda silencer do u got?
paulturnerbanshee 4 years ago
The Turbine Core 2 by FMF.
IOwn4Tractors 4 years ago
So where abouts in NY are you? Im in albany! I have a mostly stock 2000 blaster and a 1988 lt250r with some mods
DickWheels 4 years ago
Im about southern new york just before the city. Orange County. ah, the good ole 2 strokes. So whats the closest thing to your lt250r?
IOwn4Tractors 4 years ago
thats a cool blaster dude! is it reg'd? noticed the plates :D
bananabis420 4 years ago
Yepp, registered in New York and insured also.
IOwn4Tractors 4 years ago
you can ride on the street in the police want chase u?
ttrrida 4 years ago
Its not street legal, it has the plate and is registered so say if its stolen, its in the files of New York so that when its found, the police know whos it is. Although I do ride on the street, I havent had a cop nearby let alone chase me... yet.
atvstunner 4 years ago
Well you have to realize that some people enjoy a quieter sound , without losing much performance . If you want something that sounds completely obnoxious go check out the blaster kit that Toomey Racing makes , I have a toomey kit on my banshee and I'll be completely honest it's so loud with a 2 stroke it will make your ears bleed . I would definetely recommend the fmf products to the people who enjoy a more quiter performance upgrade .
Twyzted25 4 years ago
ok not to be rude but fmf pipes are the quitest ones i have heard. but its louder than stock lol
dirtyblaster 4 years ago
Well I cant argue about it not being the loudest because I dont know what anything else sounds like. I just got FMF because it was relatively cheap and sounds good. I had no idea how much more proformance it was going to give me too.
IOwn4Tractors 4 years ago
I was thinking about getting this pipe but is it really loud or is it like ok because it sounds really nice and also how much does this pipe go for
hsm2fan123123 4 years ago
It is pretty loud, can be heard up to 2 miles away(on completely flat land). I got this on eBay for $250 and they usually run for $300 +/-.
IOwn4Tractors 4 years ago
dont you have a fatty not oh wait nvm, im thinking that you had a gnarly lol
blasterfan03 4 years ago
Yea theres the fatty, gnarly, SST, and I think something else but the SST sounded best.
IOwn4Tractors 4 years ago
what type bars r those? i wanted to get new bars for my blaster and those r nice.
burtonltr2699 4 years ago
Renthal is all I know. The guy before me must of put them on because they ain't stock.
IOwn4Tractors 4 years ago
So you have the fmf sst pipe kit on yours rite?
crazy66151 4 years ago
I got the full pipe off of ebay for 250(normally 300+) but all I had to do was get larger main jet. (I went with 260 and thats for southern new york)
IOwn4Tractors 4 years ago
I want a pipe on my blaster that is going to be EXTREMELY loud..Any suggestions?
crazy66151 4 years ago
That pipe right there. I get told all the time this can be heard up to 2 miles away. and im not exaggerating. My spark plug was shit in this video so its alot louder now.
IOwn4Tractors 4 years ago
i'll still burn you with your fmf exhaust system on
cruza96744 4 years ago
I believe you... I lost against a KFX700, Outlaw 400, KX125, and a KFX450 so far. I only won against a Bayou 220.
IOwn4Tractors 4 years ago