A&K M249 PARA SAW defects

[nikamungus]

Would have watched it had there not been some shitty hip hop playing over the dialogue. 

[loungelovers]

Good  review. Very informative. Thanks for taking the time!

Airsoft Team Apocalypse

[gandolph44]

me and my friends just do "backyard battles" type thing so would this be good

[bludspilguy]

PARA sucks.

[thatguywhodidit]

how do you unjamm box mag?

[kyleklaww]

yes airsplat sucks I got the l85 from army armament and the fore-grip fell apart in 2 days. so i sent it back. they send it back to me and the trigger is all fucked..... good job airsplat they have the worst quality checks.

[ironhorzmn]

Airsplat doesn't like me. They called me an 'asshole'.

They sell crap they don't have in stock and I read them the riot act...and that's what I got back.

Go somewhere else where you get respect and real customer service.

They're not the only f*cking airsoft company on the web.

[see46]

airsplat is icky like birth control pills

[heavyairsofter]

thats y you have to get the full stock verson

[EricAndBertcakes]

First, my gun has the infamous "sticky trigger". The trigger itself isn't stuck, but something related to it internally is. I'm not even holding down the trigger, but it just continously fires and does not stop until I separate the battery from the gun. Also, my gun has not been shooting bb's. I would have the drum mag on Sound Check, with batteries in and everything. It would only shoot out about 3 bb's per every 5 seconds that I would hold the trigger for. If you know what it is, please tellme

[giansantiago]

sure there are lots of flaws but they arent a big deal theyre fixable have one of these researched some mods and stuff and voila... i mean cmon man its a chinese made gun you get what you pay for.

[xx117711xx]

with the stock, my grandpa made a screw hole thru the rod andinto the shoulder rest so i can screw a screw into the hole and the stock is now firm.

[airsoftdude01]

Thats your mistake kid AIRSPLAT you bought it from AIRSPLAT!!!!!

[AirsoftManJohn]

airsplat sucks hard

[see46]

exac tly

[Jr9303]

get a 3 cell lipo for it 11.1 volts in the area of 2200mah low capacity but it can push alot more amps then those nimh/nicd cells

[FJLM8891]

why diddnt you just return the gun for a new one if you bought it and it was faulty?

[crypto873]

this guy seems picky plus i own this gun and never had a single probem

[werddrew1994]

is this gun better than the A&K M249 MK1?

[StkProductions8]

mechanically, there is no difference... It just is longer and has a different stock

[Kaltzuu]

¨guys where do i change the fire rate from semi to fullauto?

[bulldog1010123]

its only full auto

[lookslike01]

jesus where did you get that? i dont have any of those problems with that gun

[baldcartman123]

airsplat

[rayzar94]

airsplat.....I cant say anything bad about because im sponsored by evike :)

[sammy789987]

@baldcartman123 and thats why u now have a fucked up SAW

[dvaadelo]

Where did you get yours?!

[SgtCrocodile]

@lookslike01

same here

[Barneytheguard]

Lol so am I Spinaltap!

[SpinalTapAirSoft]

Glad i will be getting the full stock version

[LieutenantScout]

Guys help, i got mine in and charged the battery and it worked, then i put the box magazine in and now, no matter what, it does not shoot ( no dry firing either. ) anyone know why

[Noahhackbart]

you might want to take off the barrel assembly and make sure its not jammed

[LieutenantScout]

Found the problem.

Fuse was blown.

[Schuss757]

hey do u know if the other versions of the a&k saw suffer from this problem? i was thinking of buying one but i dont want to deal with all these problems.

[mafiamanj15]

i have this gun, except I bought it on ebay and this guy from atlanta, georgia put in a new 8mm gearbox so the gun never jams and Mine has a classic army bipod instead of the a&k bipod. the only big problem I've had is that the stock got really loose, but i know how to tighten it, oh and the handle on mine is really loose, but it is an awesome gun.

[LieutenantScout]

My gun is 440 FPS, ive had it for 4 and a half months and no problems.

[milkbros24]

hey i was going to tell you airsplat is a very crappy company

[aohclan]

At 1:54 when the op receiver is open, the part that's still connected to the top receiver its a green piece of metal thing above your left hand that would hold in dummy rounds, does that thing fold down to connect dummy rounds or does it just stay there?

[Mousepad111]

I would recomend a 11.1V 2300mAh 12C battery. It WILL fit, I repeat... It will fit. :P

Avesome ROF, I can tell from experience.

Remember to rewire it with atleast 1.5m2 copper wirings. Or else you will fry the wirings...

[SolidSnacks92]

just throwing this out there airsplat sucks im ordering me a mk1 m249 with the folding stock :D happy day when it comes $350 and u get the gun a carry case a m4 mag a 2400round box mag batt and charger from kapowwe the CA cost what $500-$600 and u only get the gun and an m4 mag i cant wait for this to come in :D

[UnsatisfactionGuaran]

man please that carry handle is actually no carry handle!!! As on the m60, it's not meant to hold the gun's weight (the one on the m60 is even weaker). That's used for barrel replacement in the real gun: don't carry your m249 with that handle because it will break. Just a matter of time. Anyway: great review: any other review shows this m249 as an almost perfect gun. And I know there is no perfect gun in the world (at least, not so far).

[cafemondo]

i use the carryhandle on mine all the time, ive added more crap to it so its way heavier as well, i run with it and jump with it all day long and its never let me down

the boxmag though is a piece of crap

[MRJimcoMustache]

ive had all the exacy same problems

[warrockslashman1]

ya its because airsplat sucks, that gun is great, but because airsplat touched it, it made it crappy

[sludrick]

it was airsplat man i had a terrible experience no quality control

[kuyakev]

have you taken this gun out yet on a game?..if so can you do a review on its performance on the field? thanks.

[baldcartman123]

Yea as I said the performance is similar to a stock classic army M4 around 320 FPS shoots around 140 feet

[kuyakev]

im really planning to get this gun same exact one..however im going to use it primarily for CQB..indoors cuz i play lots of indoor games not outdoors..do you recommend it as an indoor weapon?

[baldcartman123]

yes it works pretty well with CQB.

[GhillieShooter08]

yea u got a faulty gun... it should be around 13-16 w/ a 8.4v battery...

[whydnot]

You got a faulty gun. I don't have any problems that you have with my gun.

[MatteoBurke]

LOL

[optikon1]

weres the orange tip on it

[mark134]

fuck yo orange tip nigga

[darkzero145]

my gun haze a faoult cuz it will shoot but no bbs willcome out can u help me is it the kind im using or what btw my stock is woblie as hell lok at my vidio and rate and comment

[mcqlax33]

hey does the one on airsplat come with a carrying case or not?

[baldcartman123]

No it does not that is why they cost $100 less

[KelskS]

DONT BUY FROM AIRSPLAT. they have really bad products and just as bad service. i bought an mp5k which turned out to be a piece of crap and they didnt send a bunch of stuff that was suppost to come with it. after about 10 messages of them playing stupid they basicly said "too bad"

[Gurugamer07]

I havent had any problems with Airsplat. and they sell good guns as well there buddy you just have poor choices in gun buying. But the carry handle wobble is nothing to wrry about, the stock is a little disturbing, the battery it comes with is crap, so you did yourself a favor by buying another one, thats basically it...

[Pflargelt]

No problem, I was worried at first too!

[Pflargelt]

I have the same gun and the carry handle is wobbly on mine as well, it is because of the design of the "pegs" that allow it to clip into the base thing if that makes any sense. they are shaped like this / \ as opposed to this | |, so they have room to wiggle I guess. the gun isn't going to break from it, so I just ignore it.

[yeah1312]

thanks for th info.

[jeremy3508]

wewt first comment