hey hey! Have you considered - fast abs magic (google it)? Ive heard some great things about it and my brother in law got really defined Six pack abs and lost tons of belly fat with it.
Hello! Have you considered - fast abs magic (search on google)? Ive heard some incredible things about it and my GF got detailed 6 pack abs and lost lots of fat with it.
I have this gun and was wondering what the barrels inner diameter is, I was thinking about buying a 6.01. I just want to make sure it does not already have one.
If it's stock, most likely around 6.08mm. For best all around use, find a high quality 6.03 since it's up to par with 6.01. Just try to find high quality barrels like Prometheus/Edgi/KM. But if you're on a budget, just go with a Madbull barrel.
It's just a standard 8.4v 1100 mAh mini. I got myself another one of these, metal bodied with a mosfet instead of a fuse. Honestly though, for your JG, you're much better off with a 9.6v, it has a much better trigger respone and ROF. If you can, just rewire the front wiring to go outside the handguard for a peq box, or find a small enough battery. I tend to use lipos under 1200mah or so because they will fit.
im getting this gun but i dont want to use the stock battery cause i heard it wont last very long and the other choices are intellect NIMH 8.4v 1200 MAH mini battery, intellect NIMH 8.4v 1600 MAH mini battery, tenergy NIMHn8.4v 1400 MAH mini battery, and tenergy NIMH 9.6v 1400 MAH mini battery.........which one should i get...PLEASE help
If you're going for longer playing time, get a higher mAh battery, like that Intellect 8.4 1600, most likely it won't be able to fit at all.
Your best bet is the tenergy 9.6v 1400 mAh that you mentioned, hopefully it is in a butterfly configuration.
When I can, I'll try to upload a video on my non-working s-system (sold my old one and bought a new one with metal body, one piece hopup and mosfet) with the nunchuk/butteryfly battery configuration.
I got a 11.1V Tenergy Lipo battery and i realised it was ablouth a half cm to thick, i had to grind the heck out of the lower handgrip and inner barrel. it finnaly fit, but for all of you that think this battery is stubborn, just type in JG M4 S-system battery mod. it helps a lot.
T-type connectors, one's horizontal, other vertical. They just provide less resistance and won't heat up the wires as much. I play semi, the battery and wiring actually get really hot.
The problem I find with JGs is that the the wiring is the real cause of cramping the battery and the wiring itself. Take it apart and find out how long the wire connectors that are midway to the fuse box and gearbox. I took out the fake gas tube(looks like a gold tube) and ran most of the wiring up there and placed fuse on the other wise. Now I have even more room and the battery actually wiggles around. Know if a 9.6v nunchuck style would fit?
It's more practice depending on the person. The launcher might get in the way of holding the lower handguard. I had problems even with the laser unit I attached there.
The best weird solution I can think of is somehow get an offset rail mount to attach the grenade launcher, or get the damn thing off quickly.
I've been through several games and the batteries lasted a while. Probably because I mainly go semi-auto, unless I'm covering.
hey hey! Have you considered - fast abs magic (google it)? Ive heard some great things about it and my brother in law got really defined Six pack abs and lost tons of belly fat with it.
MsAssare 2 weeks ago
Hello! Have you considered - fast abs magic (search on google)? Ive heard some incredible things about it and my GF got detailed 6 pack abs and lost lots of fat with it.
asad11112 3 weeks ago
Does a tenergy 9.6v mini battery fit in this gun?
CollectorAgentAlex 3 weeks ago
cant get the damn wires to work with me its pissing me off!!
kennyjr1995 9 months ago
i cant get this fucking thing in
reaperairsoft30 10 months ago
what it says in the directions do you have to have the wires wrapped around a metal cover or can you just connect it and go?
SuperFootball2011 11 months ago
I have this gun and was wondering what the barrels inner diameter is, I was thinking about buying a 6.01. I just want to make sure it does not already have one.
UIFRINN 1 year ago
@UIFRINN
If it's stock, most likely around 6.08mm. For best all around use, find a high quality 6.03 since it's up to par with 6.01. Just try to find high quality barrels like Prometheus/Edgi/KM. But if you're on a budget, just go with a Madbull barrel.
geosky19 1 year ago
great vid really helped me
4xxairsofterxx4 1 year ago
Where did you get that battery? I'm looking for a good one For my JG M4 S-System
451Gaara 1 year ago
@451Gaara
It's just a standard 8.4v 1100 mAh mini. I got myself another one of these, metal bodied with a mosfet instead of a fuse. Honestly though, for your JG, you're much better off with a 9.6v, it has a much better trigger respone and ROF. If you can, just rewire the front wiring to go outside the handguard for a peq box, or find a small enough battery. I tend to use lipos under 1200mah or so because they will fit.
geosky19 1 year ago
i got this gun then the battery fried on me so i actidenaly got a 9.4 instead of a 8.4 ... WHAT D000
jacker372 1 year ago
dammit i hate this the battery is to hard to get in anyone want it for 159 dollas
kav97 2 years ago 2
im getting this gun but i dont want to use the stock battery cause i heard it wont last very long and the other choices are intellect NIMH 8.4v 1200 MAH mini battery, intellect NIMH 8.4v 1600 MAH mini battery, tenergy NIMHn8.4v 1400 MAH mini battery, and tenergy NIMH 9.6v 1400 MAH mini battery.........which one should i get...PLEASE help
joey039581 2 years ago
If you're going for longer playing time, get a higher mAh battery, like that Intellect 8.4 1600, most likely it won't be able to fit at all.
Your best bet is the tenergy 9.6v 1400 mAh that you mentioned, hopefully it is in a butterfly configuration.
When I can, I'll try to upload a video on my non-working s-system (sold my old one and bought a new one with metal body, one piece hopup and mosfet) with the nunchuk/butteryfly battery configuration.
geosky19 2 years ago
I got a 11.1V Tenergy Lipo battery and i realised it was ablouth a half cm to thick, i had to grind the heck out of the lower handgrip and inner barrel. it finnaly fit, but for all of you that think this battery is stubborn, just type in JG M4 S-system battery mod. it helps a lot.
qwe12364 2 years ago
deans connectors ?
94STFU 2 years ago
T-type connectors, one's horizontal, other vertical. They just provide less resistance and won't heat up the wires as much. I play semi, the battery and wiring actually get really hot.
geosky19 2 years ago
can u tell me if a 7.4 lithium will fit in this gun?
94STFU 2 years ago
Should be able to, as long it is around the same dimensions as the stock battery. Best to bring your gun somewhere and test the size.
Although I would recommend changing to deans connectors so you don't blow either the fuse or the connectors. I played semi-auto, it can get hot.
geosky19 2 years ago
what if you want a different battery i bought a Tenergy 9.6V and it doesnt fit what better battery would
Smashboy44 2 years ago
I've been hearing putting 9.6v in the handguard. Otherwise, go for a li-po, which is what I'm aiming for currently.
I still haven't done the nunchuck configuration though. If you bought the large, bulky kind where it's a single piece, not sure if it will fit.
geosky19 2 years ago
ok thanks
Smashboy44 2 years ago
i've watched your video fifty thousand times and i sitll can't get it..
themaninthabox 2 years ago
thank you for the help.
tylergreen123 2 years ago
anybody know how long to charge the battery for?
BahBlahBahBlah17623 2 years ago
the first time you charge it for 7.5 hours
leatherneck8541 2 years ago
What the fuck is wrong with you? 4-4.5 hours.
littlecheckerbox 2 years ago
Thanks, I always have to fight with it.
Even with the battery and wire positioning, the hangaurd still seems too tight. almost as if the stock battery is too big.
SmartFist 2 years ago
The problem I find with JGs is that the the wiring is the real cause of cramping the battery and the wiring itself. Take it apart and find out how long the wire connectors that are midway to the fuse box and gearbox. I took out the fake gas tube(looks like a gold tube) and ran most of the wiring up there and placed fuse on the other wise. Now I have even more room and the battery actually wiggles around. Know if a 9.6v nunchuck style would fit?
geosky19 2 years ago
I see, I'll check that out on mine. I don't think the nunchuck style battery would fit. I don't know for sure though. Thanks again for the advice.
SmartFist 2 years ago
It's more practice depending on the person. The launcher might get in the way of holding the lower handguard. I had problems even with the laser unit I attached there.
The best weird solution I can think of is somehow get an offset rail mount to attach the grenade launcher, or get the damn thing off quickly.
I've been through several games and the batteries lasted a while. Probably because I mainly go semi-auto, unless I'm covering.
geosky19 3 years ago
hey mine has a gernade launcher any help?
talk14 3 years ago