airbrush help

[genrash]

Hi i have an Omin 3000 & an Omin Matrix & they seem to be spitting the paint of recent (not constant flow). I always clean them thoroughly & have no air leaks, so i dont know why this is happening. Can anyone help?? Thanks

[jaxv94]

fit tuck

[natealb]

Thank you for making this vid

[mumforddale1]

nice view!!!!!!

[ddwdaan]

1:32

[AlesNails]

thank you so much!!! with this wounerful helpful video..i just bought my gun, me n my husben tryed all night trying to make it panit not till u said to adjust the tip n neddle. now my lovely husben made it work....thank you...

[ModsByESUx]

i see tits

[Spookycm]

Hey i got a Badger airbrush and instead of spraying out the paint, it sprays into the paint.... can some one help me out please??? thank you!

[maricopa404]

I'm a beginner and even I know not to put the needle in like that to test if your trigger is in place.

[Zackhughes02]

You can hold an air brush how you want

[DqSxDaRkNeZHD]

BOOBIES

[BigAndTall666]

Luckily i have Badger airbrushes and have NEVER had NO problems!

[crzybtch1000]

Nice rack

[agkathoula]

... also I just realized that when i close the needle-cup with my finger ,the liquid in the cup bubbles without touching the triggrer (the compressor in turned on ) . Is that air leaque ? how can i fix it ? :)

[agkathoula]

Hi ! Ii seem to have a slight problem with my airbrush.I dislocated the trigger and the piston underneath it moved from its place too. I put them all back but the air doesn t flow through the airbrush.I checked the air-valve and seems ok.(can i use some oil to make it more slipery ?) . Any ideas ? What should I do ?

[ImmortalGreekFighter]

@agkathoula Καπου δεν εχει καθησει καλα το λεβιεδακι κ δεν εχει σφραγισει ο αερογραφος,γι'αυτο εχει διαρροη αερα!Αν αυτο στο εκανε αφου εβγαλες το λεβιε τοτε σιγουρα κατι δεν μπηκε σωστα.το λαδι δεν θα βοηθησει σε κατι μιας κ χρειαζεται καθε 3 με 5 χρονια αναλογα τη χρηση!Καλο θα ηταν να "λυσεις" ολοκληρο τον αερογραφο να καθαρισεις τα κομματια με οινοπνευμα η διαλυτικο νιτρου(μονο αν δεν εχει λαστιχενια μερη ομως) κ να προσπαθησεις να τα βαλεις ξανα.Ταλαιπωρια αλλα ετσι ειναι αυτα τα εργαλεια!

[GreenEyedTattedGurl]

Hello I have a brand new airbrush compressor and airbrush gun, just bought it Model TC20 Power1/5 HP, Air Exhaust 1/8"BSP/NPT, Air Delivery 23-25 L/MIN my problem is it keeps turning off after a few seconds. I have never used one before and have only seen tutorials on youtube. I followed instructions on assembly which were vague at best. I did adjust the pressure nozzle. Any suggestions?

[ProperlyStained]

Before anyone takes this to heart, this vid is not totaly accurate. Anyone who calls an airbrush a "gun" is not in the art industry, she must do county fair tattoos or spray tans. No real artist would leave any parts (the head cap, the nozzle cap and the crown cap should ALWAYS be taken apart and cleaned) There is nothing on an airbrush called a "cone", it's a nozzle, and I cannot imagine what a person would have to do to an airbrush to EVER crack one, let alone one every couple months! Shame!

[ProperlyStained]

IMO you should never put the needle back in the airbrush, tip first. You are almost sure to run the super-fine tip into something, on your way in. A tip with a bur on it will never work right. I always put the needle in blunt end first, from the front, there is no way to damage the tip that way. I've ruined needles this way.

[Pimpmedown]

3:24

she said "penis" right ? :D:D:D:D

[Pimpmedown]

she´s a lefthander! yea h! :-)

how long do u think a "talented"[my teacher said] black-white painter(on paper) needs to lean airbrushing ?

[RagedHitman]

Very helpful thanks really broke it down for me u should write a book lol :)

[robindeakin]

thanks for video, the paint does not get pushed forward it get drawn forward by suction, set nozzle by loosening chucking nut dont remove nozzle , nice boobs thanks robin

[BigAndTall666]

The "cone" is the NOZZLE! -I take proper care of my tools and have NEVER cracked anything nor bend any needles, you must be molesting your tools if you change nozzles every 3-6 months (i would NEVER let you near my tools)!

[zrsl]

nice tits lol

[l3lackAng3l]

thx sooo verry much

[smshdspdr]

There was an airgun ?

[blorchdude4]

thanks for the video miss very helpful new to airbrushing and thats the same airbrush I have

[davidkarji11]

if i spray whit my airbrush than there coming splashes out. What am i doing wrong?

[cary19642003]

What kind of boobs are those? Can you give me an instructional and close up of those?

[rettupillil71]

hahaha boobs indeed.....

[gtaTbogT]

boobies ^^

[Mr40up]

IS it me or was she saying somthing about an airbrush???all i saw was some lovely tits , WOW lady ur rak is awsome, MARRY ME pls.

[Miss75Pretty]

Hi, I am into cake decorating and I was convinced to buy an airbrush. Thanks to people like you I am learning to use it. I have a the Airbrush Master G34, I think it is a dual gum but I cannot get the trigger to go backwards. How do you adjust the trigger? How far back or how deep should adjust it?

[BigAndTall666]

@Miss75Pretty You do not mention a brand, is it iwata /binks/thayer&chandler/other? -Check ie Badger airbrush co. homepage for all kinds of problem solving and tips on use etc. (badger is my favorite brand)....

[swikil]

I worked a head to the base part.... ahh Thank you:)

[twistinthunder]

nothings the matter with your guns.

[trikytrakes]

yes am agree, very nice boobs, you have a nice bodie

[dubsity280]

Fuck the airbrush lets see those boobs!!!!!

[willsworthy]

thanx

[3xut]

I am having a hard time concentrating on the air brush lol

[luuko656]

hi, first of all nice vid, secondly i have a question, when iam using my gun, most times all the paint is geting blown out of the airbrush gun via the paint cup on top. this causes a horrble mess, what is wrong? how can i prevent it?

[cxbra]

Whats happening is your nozzle cap (front of the gun) is not tightened down enough.

[JHS1025]

nice boobs ;)

[africanos89]

man that is wat I was going to write ... yea :-)

[xbradxeax09]

@JHS1025 . hahahahahahahahahahah NICE

[firetyco]

@JHS1025 omg i was thinking the same thing lol very nice, i was gunnu comment on that lol!!!

[ani35]

Thanks.. I'm just beginning & this solved a reassembly problem I was having. wish I'd thought to look this up an hour ago :)

[nabatra]

peitão bonito!!!!

[airscrew1]

I've got to mention something I've just been taught. Iwata don't de-burr the blunt ends of their needles so you have a rough edge to it. Also feed the needle back into the gun from the front not the back that way you don't risk damaging the fine tip.

[WorkIt1966]

Great job Heather. BTW, just saw a picture of you and you're really beautiful.

[thatgracefulledge]

Get a new PAASCHE TALON made in Chicago USA which is rare rare I just bought two of them easy to clean and it has a nice look and feet to it.

[vetterman008]

I'd like to brush those boobs! :-P

[angelitovidkid]

i use a badger 360, never had a problem with it. keep your airbrush CLEAN, after EVERY use and it will perform as well as the day you got it.

[pursuitas]

nice breast :DDDDD

[totonetaron]

hey i have a cresendo 175 i just changed the cone but the paint is not coming out?!

what can i do?!

[jobro656]

i have a badger airbrush but no paint is coming out

[whenicuicu]

Try thinning your paint, or if it is still an option, return it and get the Iwata Eclips HP-BCS airbrush. They work mush better then badgers.

[fibiger12]

50 millimeters :p

[pit831]

grat tits and great video you should come out with more videos =D

[graffitikid17]

um not to be mean but your tit is hanging out

:D

[hermanbong74]

i wiggled my trigger too much, i think i broke it. :(

[foraminutethere]

Heather thanks so much for sharing your knowledge. You explain things really well, better than other videos I've seen. Would love to see more how-to's from you, for example paint, and how to ensure proper viscosity, what brand ect. Also how to practice spraying strokes for beginners. Hope to see more from you hon. :)

[positivepcr]

I think those boobs were enhanced with a little fantastic airbrushing....

[redjoker91]

can u teach me how to hold my gun ;)

[iwriteA2]

awesome vid.thanks.

gosh i just got my new badger 100 and its kinna different .with the trigger took me bout 2 hours to put back it doesnt have that thing at the end of the trigger and the back ledge is seperate from the needle chuck.its a bitch to put back in.never again.lol

[haydar123123]

Thanks

[steffgonz]

This was a great tutorial...thank you. I just disassembled and cleaned for first time..Problem with one thing, the backlever(little tiny piece) fell out when i took out the pushbutton, and i cant get it back in properly. any ideas on where i can retrieve such instruction? I will try the company again, but haven;t had much luck.Thanks!

[steffgonz]

wow. this was really good.thanks. i can't seem to get mine reassembled properly though. I have a piece that fell out of where the trigger is.

[fibiger12]

when u assemble the airbrush, put the needle back in LAST, then you will be sure that it fits perfectly against the nozle.

[sirtungheralot]

fuck iwata buy devibliss dagr

[MothaFuckinRealGamer]

whats the cheapest kind and where do you buy these from?what kind of store

[sirtungheralot]

i sent you a message bought it in your in mail with info on airbrushes

[aznsoulja37698]

where can u buy dat air brush thing and paint?

[theater40]

ok i have a question i have probly the worst gun but since im not sure if its something i wana do i can use it to see if i would but when i use it the paint woun't come out its black and plastic lol i no

[tasulinha2]

hello, can you tell me please where I can find this gun on the net? Thanks a lot

[ostepop21]

what's the name of the airbrush? :)

[sillyheatherb]

This particular gun is an Iwata Eclipse HP-BCS

[ostepop21]

what's the name of that airbrush? :)

[silvester51]

an iwata Eclibse dude

[shakirek2]

Wow!

You explained everything in a way that anyone can understand how the airbrush works and what causes the problems.

Thank you so much.

[sillyheatherb]

thanks for writing

well what paint are you using? Some paints are pretty grainy and once a piece of the pigment or grain gets stuck in the cone it will cause a weird spray pattern and spitting. Once that starts happening pour some alcohol or water and spray that so that it gets the clog out

Also, if your needle starts getting burs and has problems take a piece of sand paper and run it over the needle, if it doesn't work buy a new needle. It's worth it

Hope I was able to help

have a wonderful day

[lulu524]

I want to Soooooo be one of your face painting models! I love your paintings!!! Thanks for posting them!

[ProperlyStained]

@sillyheatherb, no offence hun, but you should know more before you post vids or anwer questions. No paint has "grains" in it. Pour some alcohol? Water? What?!? You have to know what medium they are useing before you give any advice on what to "pour" into an airbrush. There is no "testing to see how far a needle goes" The nozzle is set before the needle, period. If you put needles in the way you show, you will ruin them, almost everytime. Sorry, but you misinformed everyone who has seen this.

[castthom]

hi great tips cheers i have a similar airbrush but it is gravity feed and im having trouble that when ever i spray white it goes really granulated and i get alot of over spray its properly reduced and every thing got any tips.

also wat do you think the best methods are for straitening needles??

[mistameanor420]

White has a very low amount of pigmentation, when compared to darker colors. It is hard to see, and therefor takes 2-3 more coats to get the same effect. Try using yellow in place of white. If you NEED it to be white, try using yellow first, then going over it with white to finish up.

[youutubestinks]

sounds like a good tip gonna try thx