Do the Italian way: put some sugar in the gasoline, as it melts in it and burn into de piston at 600 C, it becomes sticky caramel! ahaha should try it...
@99olo leterally how much are these engines I WANT ONE.. to bad when i was little my father threw out his awesome weed eater before i know how interesting they are. and how interesting all engines are. so where can u get these weed eater engines THAT HAVE A THROTTLE AND A CLUTCH so i can build a go cart
i killed mine today. i started by running 20% nitro and it wouldnt blow. so i dumped that and went straight gas with no oil and it still wouldnt die. so i started putting grass, dirt and small rocks right into the carb. it took me a good 20 minutes of that to kill it.
when i took the motor apart there were 2 chunks of piston skirt missing and they had been ground up into an aluminum/oil/dirt paste that was caked all over the inside of the crankcase. these fuckers just dont die easy.
if you wanna see some flames u run it really rich but not to much or you'll just bog, then run about 40 - 60 % rc race fuel ( 15 - 30% nitro the more the better). thats what me and a friend did last year on there old 23 cc at night. big'ol white flames coming out the side for about 6 inches. but sadly it blew about 2 minuets later because it scored the head and the sleave lol.
@rm250dude Man, ran mine with dirt in the tank, metho mixed with dirty fuel and modded it to rev higher, damn thing went for 10 minutes before my ears hurt and I got bored.
The motors are built tough, just all the chinese crap carbies stop them.
Do the Italian way: put some sugar in the gasoline, as it melts in it and burn into de piston at 600 C, it becomes sticky caramel! ahaha should try it...
hdug86989 5 months ago
common 2 stroke stay alive sniff i love your kind ! ;(
holygroundscoffee 10 months ago
Sholdve made a rc boat lol
pcblah 10 months ago
i pin my engines- lika bosss
brons450 10 months ago
okay..seems to me that engine was pretty good...
shadooky 10 months ago
wats with the compressed air?
christhetromboneguy 10 months ago
@christhetromboneguy Its an air cooled engine. He's trying to keep it from locking up.
papabugs71 10 months ago
shoulda took a shit in the carb woulda stopped it right away!
kollak01 10 months ago
2 words...STRAIGHT GAS
aaronzack14 11 months ago
don't put your finger in the exhaust port..
Isjix 11 months ago
run it on straight gas next time
aaronzack14 1 year ago
I'd be so pissed if these things were valuable... but, for a dime a dozen... why not?
99olo 1 year ago
@99olo leterally how much are these engines I WANT ONE.. to bad when i was little my father threw out his awesome weed eater before i know how interesting they are. and how interesting all engines are. so where can u get these weed eater engines THAT HAVE A THROTTLE AND A CLUTCH so i can build a go cart
seelder 1 year ago
@seelder the little weedeater engines dont have near enough power....you need at least 5hp for a decent cart, or 3.5 if you make a little one
christhetromboneguy 10 months ago
What is that at 0:11?
Isjix 1 year ago
Awww, poor engine. it's crying :'(
thrasher1983 1 year ago
I guess the best time to grind the cylinder fins down is when it going WOT! Also what happens to it, is it still running right now..LoL
TheNoisePolluter 1 year ago
jamm a screw driver in the exaust port see what happends XD
soverato3 1 year ago
trying to destroy it Why ass hole
bimbu9 1 year ago
how did you get it to run a such a high rpm?
mastax1234 1 year ago
run it straight on gas
aaronzack14 1 year ago
@aaronzack14 it was actually 2 stroke gas he was using
Smallgasengine1 11 months ago
i killed mine today. i started by running 20% nitro and it wouldnt blow. so i dumped that and went straight gas with no oil and it still wouldnt die. so i started putting grass, dirt and small rocks right into the carb. it took me a good 20 minutes of that to kill it.
when i took the motor apart there were 2 chunks of piston skirt missing and they had been ground up into an aluminum/oil/dirt paste that was caked all over the inside of the crankcase. these fuckers just dont die easy.
Turbojeep23 1 year ago
if you wanna see some flames u run it really rich but not to much or you'll just bog, then run about 40 - 60 % rc race fuel ( 15 - 30% nitro the more the better). thats what me and a friend did last year on there old 23 cc at night. big'ol white flames coming out the side for about 6 inches. but sadly it blew about 2 minuets later because it scored the head and the sleave lol.
5
kartz4fun 1 year ago
shove fireworks in the exaust.
gokartbuyer 1 year ago
Turn it off and then try to turn it back on!
Spywell 1 year ago
shove a screwdriver in the crank
flippedmysled 1 year ago 3
good oil
powerstrk250sd 1 year ago
@JoshatSuzuki i was thinking the same thing
xxHOLESHOTxx 1 year ago
why did u kill the poor lil engine..should use your mind to creat something whith it..
manoalkinho 2 years ago 5
how could you what did the poor lil 2 stroke do to you
Am3TuR3Build3r 2 years ago 2
Put the carb it to water and conecting rod gonna pass throw the piston.
huuot 2 years ago
If you ran it on nitro fuel it would rev even higher! It would probably throw the rod if that happened!
MrMoterKid 2 years ago
i wanted to see how it sized~ haha
ZeroKenshin 2 years ago
Poor little 2 stroke!
MrMoterKid 2 years ago
thats a tough string trimmer
ihelk 2 years ago 3
I would sure like an engine like that
hockeysoccerplayer24 2 years ago 3
thats how u handle that
anthonynumber12 3 years ago
that shit is unstoppable !!!
prettytrini83 3 years ago 2
no muffler lack of cooling air and excessive no load rpms. sparks flying from the exhaust port and this thing still screams.
kwacz 3 years ago 5
I would put acetylene and oxigene into the air intake and disable any limiters
kaltstarten 3 years ago 2
those fuckers are hard to blow up
rm250dude 3 years ago 29
@rm250dude Man, ran mine with dirt in the tank, metho mixed with dirty fuel and modded it to rev higher, damn thing went for 10 minutes before my ears hurt and I got bored.
The motors are built tough, just all the chinese crap carbies stop them.
NorkiddExo 6 months ago
We have ways of making 2 strokes like you talk....... hahahaha
2004trickblaster 3 years ago 2