MIDI platter control of the Scratch Live decks

[zeez69]

Hey dude can you send me the mappings and controller editor settings for kontrol s4. Thanks dude, cheers!

[moneysound1]

hey man i would like to midi map my numark ns6 to use with scratch live any help plz

[DjRick5]

WOW! Can you send me instructions? I have traktor S4. (eric.lacharite@csnavigateurs.­qc.ca)

Thank you very much!

[TheBoknoy74]

I really need it. Please send me the instructions (marlon.orellano@yahoo.com) Thanks you so much..

[vincethemurder]

I would love this for my ns6 skubydu222@yahoo.com

[JK1jonathankeenan]

How did you run it without Rane hardware????

[djphatmon]

do you know if the idj3 will work with serato like you did with the s4 and how do I link the controller with serato?

[mrspin3]

this is nice i have the numark ns6 and i will like to check it out..but first how do i link the controller with serato..

[dziadostwo51]

Hello.

I saw Your video about jog mapping in Traktor S4

I would ask you to send instructions on how to do this.

Greetings from Polish.

Simon Wojcik

my e-mail: grandf@gmail.com

[djpa3co1]

I am wondering if you can email me on how I may be able to use my Numark V7 with SSL?

[djhardrive]

I have a VMS4. Can I control serato with it. Can you send me info for this. Thanks

[vernellstube]

I have the denon dnmc 6000 could you send me the info on how to do this ANSI can you use this with virtual dj 7 pro

[jamminjorge965]

@SeratoTutor how can i do this for the ns6 jamminjorge@att.net

[pablodos777]

Hey buddy!! I need your help!! I have a VMS4 and I cant get it to scratch the jog wheels. please help!

[blondiesixsixsix]

Hi I would like to map my NS6 with Serato, please can you help me.

I also have a Traktor S4 and a M Audio Xponent. I would like to spin video's on Serato + Video SL and any my controller.

[HotLikeFIreMama]

Oh my, first off, I love your vids and help with Serato. I just got the NS6 trying to get into the whole DJ thing. My bad luck is that after I bought the NS6, that's when I got to know that Laptop with AMD CPU are not supported with ITCH which is why my audio is dropping. I was able to map ScratchLive to the NS6 but which ever midi setting I choose, I just can't get the Pitch to work. whether it's Absolute or Relative, it jumps and/or stutter. Any good tip to save me, please????

[soundinsurgent712]

This is great!! Could you please in box me the instructions on how to do this. Thanks for the time and great videos!!

[rafsoto24]

can you inbox me on how to map serato to the s4 i have the s4 and i plan on getting sl1 but dont wanna go out and but new turntables or cdjs so i wanna figure out how to use the s4 with the sl1.. i love traktor but i also wanna try out scratch live thanks for your help

[FreddyH88]

Have you noticed any complications yet or is it running stable? I'm thinking about getting a S4 to run it with Video SL. Thx

[DjDelRe]

i cant get my VMS4 mapped, i cant mapp anything can someone tell me what im doing wrong

[pablodos7]

Hey there! I have a vms4 and will love to control serato with it. Could you please send me instructions how to and what else do I need to make it work to my email at pablo.ortiz777@gmail.com thanks!!

[happymarik]

can you mssg me please, i have a knotrol s4 :P mac osx

what else does this new hack control?

[cesarinformatico]

acrhivos to work have the control I use serato traktor

[cesarinformatico]

acrhivos to work have the control I use serato traktor

Listen

New! Click the words above to view alternate translations. Dismiss

[cesarinformatico]

This also works to control traktor serato, creom that is easier than software traktor

[DJCAV23]

hey if you can i would appreciate if you would send me the xml file that has the full mappings for the dn-mc6000 to work with serato

message me at perfectsoundsdj12@yahoo.com

thanks

[hmproductions1224]

CAN YOU HELP HOW TO SET UP THE S4 WITH SCRACHT LIVE PLS THANK YOU

[amitnuri]

hi

i would definitely appreciate help with mapping my sc2000 too!! i mapped all the buttons exept the platters. Can you please help me ?? ive been reading every post in the scratch live forums ...

i tried to copy some codes to midi preset but it doesnt work

so if you can please help me?

thanks

[lilgavin1]

hi man can u help me with my vms4

[Breakfader]

i would like to get that from u i got the s4 for the same reasons you did also.

[speedfigure]

Can this work with the numark ns7?

[djtiggur]

Hello Serato Tutor!

I have an American Audio VMS4 (which i have been struggling with), and am planning to replace it with a Denon DN-MC 6000 in the next few days. Though i have Traktor, I would much rather use it with my Serato to get me running right away. I would REALLY appreciate your direction as to how to allow me to use it in the same way you were in this video.

Thanks in Advance!

Colin.

djtiggur@aol.com

[djpromote]

list the control editor settings for the S4! Having trouble understanding the values I need to have setup... THANKS. I sent a message too

[kckitten18]

HI...SeratoTutor...I can you check your messages...I have reply in regards to your video on MIDI platter control of the Scratch Live decks ...Need Help... Thanks

[djchrismaes]

Can someone give me a copy of the full correct midi settings of the DENON DN-MC 6000 so that I just can copy past that in my SSL settings. With the platter settings !!!.

mail please to dmc@telenet.be

thx

[daddyanddaisy]

I would really really appreciate it if you could help me map my Denon DN SC2000 with serato scratch live, I am useless with technology, at this level anyway... I know how to map buttons etc but I desperately want jog wheel/platter control.

Thank you so much in advance

James

[djkleen408]

@daddyanddaisy i would definitely appreciate help with mapping my sc2000 too!! Can you please help me out too SeratoTutor (Konix)?? ive been reading every post in the scratch live forums on this... and have been following along but need help with it!! Thanking you in advance!!

---Kleen

[djmikejames3]

i want a single deck pioneer midi controller the dds lloks good but would much preffer 1 without a mixer

[FunkyRob]

Normally when you release your fingers from a jog wheel after doing a scratch, the track will continue playing. By the looks of this it appears that you have to use the jog wheel in combination with the start button. Am I right?

[SeratoTutor]

@FunkyRob - I started off with the deck stopped/paused, that's why I had to press the play button.

[FreddyH88]

Awesome! Will it work with Mac OS also or is it microsoft only? Is it working with any kind of midi-plattern like with the vestax series? (Typhoon, vci100/300)

Thx!

[SeratoTutor]

@FreddyH88 -This will work on Macs and PCs, but can't say certain if it will work with this controller or that controller.

[LRG102589]

can i use serato with hercules rmx controller?

[fco242]

Hi,can the newmark omnicontrol be mapped?it uses Traktor Pro, if so, please let me know so i can PM you.Thank you very much!

[clubhead101]

DENON DN-MC6000 has best unit for this.

The MC6000 offers different options that these other units do and do not. The 6000 has 2 mic inputs, 4 channel (non-computer dependent), 4 decks in one and many more. It also works with both Traktor and Virtual DJ out of the box and can be MIDI mapped just like SeratoTutor is showing in this clip . This unit is also built like a tank and with stand not only your room rig but also your club or mobile rig. Check it out at the NAMM Show, DENON DJ booth 4242

[djtaboo]

Can this be done with the Vestax VCI 300?

[DJShowTyme1979]

I have a Mac Book Pro, Serato Scratch Live 1 and I use (2) Numark NDX 800 CD/MIDI Controllers Can you please help me out with getting my (2) NDX decks to work as midi controllers. I cant seem to figure out how to map the buttons on my deck to go with the Serato.

[djindyuk]

hey man i sent u a pm.. thank

[alfonso704]

I hope you own a macbook and a pair of Turntables...

[SeratoTutor]

@alfonso704 - Of course I do, you can clearly see the Macbook Pro in the lower left.

[alfonso704]

@SeratoTutor Oh i see now lol For a sec i thought you were djing off a pc

[pelayostyle]

@alfonso704 What if he didn't? Whats your point?

[alfonso704]

@pelayostyle Well what kind of "REAL DJ" djs of a little midi controler like that one?

[SUPERFRESH98901]

CAN U DO IT ON THE NS7

[djfrankis]

cool! but why u running serato on a PC? it lags! i though u were a mac!!

[SeratoTutor]

@djfrankis - Again, you can clearly see my Macbook Pro in the lower left. I did this on my dekstop PC as I have a big table for the S4. Scratch Live also works fine on most PCs, just stay away from AMD processors and cheap $300 Walmart PC laptops.

[benzit0]

clever!

[TitoMysta3000]

im guessing the V7 dose not work for this hu

[SeratoTutor]

@TitoMysta3000 - Try it out and see.

[DJLOUIEMIX]

Does Serato allow this ??

[ReboyGTR]

Does the S4 feel plasticky/cheap or is it good for a MIDI controller?

Also,how do you make your virtual deck bigger in Serato?

[SeratoTutor]

@ReboyGTR - The S4 is plastic, but feels solid and certainly not cheap.