i put shrink rap on it an i took a liter and lite it just underneath the rap. i didnt do anything to the servo or motor because they are pretty water tight
why have i seen so many vids of people using the losi mrc for what its not designed for. mudding, bashing trying to make it go "fast", a submarine even, as in this video. Its stupid. i dont know if you know what rocks are either
i have had mine go 3mph(walkin speed) bt if u want something fast get a nitro rc. if u want to crawl i would buy one because they r the cheapest cralwer that is still desent. i would wait to get a 1/10 scale until u no for sure u like to crawl
if you want speed go brushless. my first was a rustler, that i converted brushless right as the new brushless rustlers were coming out. I must say that rustler took a beating and was very fast.
if you want speed get a brushless 1/10 truck, you can do 55mph+ with the 7700kv mamba max and a 4200 nimh battery, much easier to maintain than nitro. and just get a 1/10 crawler by far much easier to work on in terms of finger space. hope this helps!
has ur servo died yet just wondering i might try that....use should put grease on the part where the wire conects to the srevo and the other part that might help
a cookie bag and zip tie on the speedcontroland riecever. i move the speedcontrol where the batt goes and for the servo i just put some scotch tape on the middle where it comes apart the servo is pretty water-proof though u dont have to do anything
Does it come waterproof right out of the box
N1KEGAM3R 7 months ago
Nice next time try balloon instead of Bag
andrewupsidedown 8 months ago
no this song why ?
2013dak 8 months ago
worked til u shut it off i bet lol
RyIzzle 11 months ago
Wow
teamlawless17 1 year ago
I thought they passed a law about putting this song on youtube anymore. Jesus.
theblasto 1 year ago
bad
leila159 1 year ago
you ever fix it!?
xXShadowRejectsXx 1 year ago
well you were3 asking for something to break prittymuch
gtdude75 1 year ago
what broke on your crawler and why
olliesloman 2 years ago
esc got wet so it just doesnt work anymore
rcisme1 2 years ago
ahh not good on that 1 have you bought another since
olliesloman 2 years ago
no i havent use any rc cars since then
rcisme1 2 years ago
How did you water proof it?
Dr3aMyS0b 2 years ago
i put shrink rap on it an i took a liter and lite it just underneath the rap. i didnt do anything to the servo or motor because they are pretty water tight
rcisme1 2 years ago
cool vid
ktvad2 2 years ago
why have i seen so many vids of people using the losi mrc for what its not designed for. mudding, bashing trying to make it go "fast", a submarine even, as in this video. Its stupid. i dont know if you know what rocks are either
mrdrive1 2 years ago
wow, ull learn when u accually OWN one
xXShadowRejectsXx 2 years ago
your wrong. i do own one and thats one thing i dont do with it is screw around in mud puddles. it is a comp crawler and nothing but
mrdrive1 2 years ago
well u can treat it how u want to treat it, and we will treat it how we want to treat it,
xXShadowRejectsXx 2 years ago 4
@mrdrive1 isnt that half the fun of it?
ineedajoint 1 year ago
does ur motor still rim fine? kuz i dont know if i sould water proof mine
XShadowRejectsX 2 years ago
u dont have 2 for a regular motors but for brushless motors u do
rcisme1 2 years ago
ok thanks!
XShadowRejectsX 2 years ago
yeah it runs fine if u water proof it make sure u do it right the first time
rcisme1 2 years ago
haha yea,, hey how old r u? ive always been curious, kuz my friends i make on utube who own mini crawlers are like 12-14 haha like me ahah
XShadowRejectsX 2 years ago
howd they die? a leak in the bags?
XShadowRejectsX 2 years ago
yeah
rcisme1 2 years ago
lol tat sux, when i did this to mine my dad was like "its not a water crawler, its a rock crawler LOL" he was kinda pissed with a 117$ bill :D LOL
XShadowRejectsX 2 years ago
can they go fast if you want them too.
should i buy one. or a regular car or truck!
or a full size 1/10 scale crawler.
abuvalljrs 2 years ago
i have had mine go 3mph(walkin speed) bt if u want something fast get a nitro rc. if u want to crawl i would buy one because they r the cheapest cralwer that is still desent. i would wait to get a 1/10 scale until u no for sure u like to crawl
rcisme1 2 years ago
if you want speed go brushless. my first was a rustler, that i converted brushless right as the new brushless rustlers were coming out. I must say that rustler took a beating and was very fast.
1f0und1 2 years ago
if you want speed get a brushless 1/10 truck, you can do 55mph+ with the 7700kv mamba max and a 4200 nimh battery, much easier to maintain than nitro. and just get a 1/10 crawler by far much easier to work on in terms of finger space. hope this helps!
therook1110 2 years ago
has ur servo died yet just wondering i might try that....use should put grease on the part where the wire conects to the srevo and the other part that might help
250ozarksuziki 2 years ago
LOL reminds me of what i did, fired the esc in water and it was almost 60$
XShadowRejectsX 2 years ago
if it was so much y didnt u just by another one
rcisme1 2 years ago
i payed 259 for mine (39$ for tax) and the esc was 50$ so i stuk with it, plus i bot the only MRC they had!
XShadowRejectsX 2 years ago
nice!! what thing died/broken?
wallinsky95 2 years ago
ecu and the reicever both died
rcisme1 2 years ago
ok but you had them in bags or what it is
wallinsky95 2 years ago
great video what all did you do to waterproof it?
bayareaaxialcrawler 2 years ago
a cookie bag and zip tie on the speedcontroland riecever. i move the speedcontrol where the batt goes and for the servo i just put some scotch tape on the middle where it comes apart the servo is pretty water-proof though u dont have to do anything
rcisme1 2 years ago