If you are using a ribbon (TLP model) be sure the ribbon is routed through the printer properly or it will block the media sensor and give you the "no gap error". Also, check that you have the labels loaded properly-the labels facing up not down towards the base of the printer.
Thank you VERY much!!
WowURockify 1 day ago
On behalf of Jennifer I thank you
kbookscanada 2 months ago
Thnk
guntarspetersons 4 months ago
A very insightful post. Thanks for the info.
ThePrinthead 5 months ago
thank you for your help this helped me alot at work
ricanborn2plz69 5 months ago
You just saved my client from buying 3 $400 printers!!!!
jrm523 8 months ago
Thanks! This saved me from smashing my printer.
nondachi 1 year ago
That saved me calling in the printer repair man!!!
dash1975 1 year ago
When I do this it prints out the line "no gap detected" then pushes out about 1" of the next label and turns orange/amber
robinsontoor 2 years ago
If you are using a ribbon (TLP model) be sure the ribbon is routed through the printer properly or it will block the media sensor and give you the "no gap error". Also, check that you have the labels loaded properly-the labels facing up not down towards the base of the printer.
boatlvr321 2 years ago
Thanx a lot good sir! :) this was clear and precise. It helped me to solve my problem.
ivancorea 2 years ago