Man , I there is always something New you want to add to the Arsenal !!! LOL ...
Al I took a feller one time to the Home Depot to get his Father a Truck Tool Box for his New Pickup , i'll be Damned if I didn't walk out the door with one too , and I don't even own a Truck !!! ROFL ...
Yes Sir , I have to have my Tools in Shipshape Order Brother , it drives me Nuts to have a Mess and not be able to Find Something !!!
Hey fritz do you know the flash codes for bryant furnace it doesn't have this code listed on the door. One short one long and one short flash. Let me know when u find out thanks buddy
Oh just wanted to say that I'm a klein man for life and have been using them since I got started check out there insulated series. I am going to get that pvc cutter man. Well take care my friend and keep them coming and hope your clients see this video cause it shows your well invested in your trade and the job too.
Fritz what's up brother? Hey I can't believe it but that's where my dewalt radio went.lol just kidding! I just had a question why is your company called rochester heating? If u already said it in a diff video that I apologize but I was curious why not fritz hvac? Nice setup makes me want to start running service fulltime. Good video brother
Hey Fritz!! I have watched this a few times now and just realized I never left you a comment on one of your best videos!!
That PVC cutter is amazing!! Cuts through it like it was nothing!! I know you were glad to get that in the collection!!
Brother, you have one awesome tool inventory and the E350 is the most organized and well stocked service van I have ever seen!! I am digging that box you built out of fence wood. That is awesome!!
Great video and very generous of you to share this!!
I have the Milwaukee pvc cutter too! How the hell did we live without it? haha I'm only 24 but the hand cutter was murdering my hand and wrist. Is the video quality good on your inspection camera? Also which Fieldpiece is that, the HS-35? Van is looking awesome, too bad we have to turn them into forts to keep tools huh? Awesome video man, you keep making them and I'll keep watching them!
I didn't see a valve core removal tool....get one with a ball valve....spare cores and brass caps....also, if you don't have a good cable lock for your roof rack, your ladders could end up in a pawn shop....and lastly, a good set of nutdrivers...1/4, 5/16 and 3/8 ths at a minimum
I guess I didn't show my hole arsenel , Hell I still got my first set of nut drivers ,there in retirement , using Klien Now !!! LOL ... I dig on locks brother , we have alot of thieving going on here , I have them chained down , I show that on another video . Man I have sinse added Testo 550 , SRH2 , Yellow Jacket tubing expander , Yellow Jacket Tubing Bender !!! AND a BROOM !!! ROFL ...
LOL i thought i was the only one that tried to think of the next guy in line.Never heard anyone say that but me lol. Untill this video.. Glad to know im not the only one....
@Darvin1964 Hey Brother , hope ya had a good day today !!!
I install or service everything like I was puttin it in for my mom !!! I always try and think of the next guy my friend , heck I might actually be the next guy !!! LOL ...
I kinda do these to help me , and the new people to our trade , plus they give me a great reference to go back too in the future !!! I am still learning something New Everyday !!!
@gst69man Hey whats up !!! Sorry I did not get right back to ya !!! I use brazing rods 95% of the time , but you are right , every now and then I do use solder !!!
This vid is so great that youtube waived the 10 min max requirement. Just picked up the 550 myself... I think I'll leave it in the case... don't want to break it. I snagged the same hose set you got... I think... 5 ft ball valves??
Nice, nice, nice. You got a well stocked van there brother, those AO Smith Master Fit blower motor's are the best I think, Those are the same ones I stock on my truck. Thanks for video.
@Nutintoitbut2doit Man you are to kind , do you know of anything else I should be packin Service Wise ? Dallas told me about a few relays , and boards I could get from Johnstone supply , but told me I should be cool till winter !!!
Cool if my brother is packin A.O. , I feel more confident !!! I appreciate your videos , and my other friends on here , I am learning so much from yall !!! You do GREAT WORK !!!
@fritzhvac I seen a turbo 200 run cap, you should have a turbo200x as well, but you have alot of splits there and Dallas would know more about splits we have a ton of rooftops, but i do carry a TXV kit that covers 1.5 ton to 5 ton in both R22 and R410A, but you have all you need it seems. Nice van. And Thank You for the good feed back my friend.
@Nutintoitbut2doit Hey man , we got rained out today , might head to brothers to install the rest of furnace vent , I needed a 4 to 5 reducer to finish , he said he really would not be using the furnace in 102 degree temps !!! ROFL ... I got tee capped at water heater so they got hot water !!! Man tell me more of TXV kit ? Can I get one of those or two one threaded and one brazable ?
Not a problem brother , I mean what I say very very impressive work !!!
That is one well-equipped horse you got there, Fritz! The 'dimpler' you showed on the sheet metal bench is what I call a 'snap-lock' or 'button-lock' tool. Very handy to have when doing sheet metal work. Don't worry about the benders, flaring tools, micron gauge and other specialty items just yet. There's plenty of time to buy them as you need them.
@PutSome5tankOnIt Hey BROTHER , how are you my friend !!! I was hot had a brain fart (98 degrees in Fern Creek today , talkin triple digits) , LOL , that makes sense snap lock , I have actually taken that tool and made my own field duct !!! I should of given you your props on saying , check with parts house on free stuff , thats how I got red Panduit gun , sorry !!! LOL ... Man I kinda KILLED my budget , thanks for saying that , they will come with time !!!
@PutSome5tankOnIt Hell YEA my brother !!! Man since the economy has turned your lucky to get a note pad , and a pen !!! LOL ... Man I remember when we would at least get a couple of those tiny T-Stat screwdrivers ,and baby levels !!! Got lucky with panduit gun , I held the door open for the dealer !!! ROFL ...
Thank You Dallas , you have been in the trade for a long time , you have to acquire your tools , it takes years to get what you need , and there is something always coming out you want !!! LOL ...
@dizziedallas OOP'S , I did not hit the right button , left your return comment above sorry Dallas !!! Hell I'll say it again , it takes us YEARS to ACQUIRE the specialty tools we require !!! TESTO rules !!! Thanks again Dallas !!!
Hey Fritz;
Gotta have the gear! Makes the job go that much easier for sure.
Nice and neat buddy. I love it.
My biggest chore is keeping everything in order. Makes the work go that much better.
Great video friend!
Take it cool!! Al
TheOldkid888 3 weeks ago
@TheOldkid888 Hey Al !!!
Whats up my Friend !!!
Man , I there is always something New you want to add to the Arsenal !!! LOL ...
Al I took a feller one time to the Home Depot to get his Father a Truck Tool Box for his New Pickup , i'll be Damned if I didn't walk out the door with one too , and I don't even own a Truck !!! ROFL ...
Yes Sir , I have to have my Tools in Shipshape Order Brother , it drives me Nuts to have a Mess and not be able to Find Something !!!
Thank You Al !!!
fritzhvac 3 weeks ago
Hey fritz do you know the flash codes for bryant furnace it doesn't have this code listed on the door. One short one long and one short flash. Let me know when u find out thanks buddy
Delawareheating 3 weeks ago
@Delawareheating I left you PM , Copy and Paste !!!
fritzhvac 3 weeks ago
Snap punch ??
Hvac103 3 weeks ago
Oh just wanted to say that I'm a klein man for life and have been using them since I got started check out there insulated series. I am going to get that pvc cutter man. Well take care my friend and keep them coming and hope your clients see this video cause it shows your well invested in your trade and the job too.
Delawareheating 2 months ago
@Delawareheating Klien RULES !!! (awesome tools my Friend)...
Man the PVC Cutter cuts up to 2" , and thats mainly what I run !!!
Works GREAT , No Mess , Perfect Cuts Everytime !!!
I don't even think I have charged Her but 2 Times !!!
Thank You Brother !!!
fritzhvac 2 months ago
Fritz what's up brother? Hey I can't believe it but that's where my dewalt radio went.lol just kidding! I just had a question why is your company called rochester heating? If u already said it in a diff video that I apologize but I was curious why not fritz hvac? Nice setup makes me want to start running service fulltime. Good video brother
Delawareheating 2 months ago
@Delawareheating Hey whats up my Friend !!!
Hope all is Well !!!
LOL , that Dewalt was skipping down the Gene Snyder Freeway !!!
Still got Her in the Truck Brother , and we a Rock n Rollin !!! ROFL ...
Thats No biggie , my name is Fritz Rochester , hence Rochester Heating and Air !!!
Thank You for the Great Comment !!!
Still adding to Her Everyday !!! LOL ...
fritzhvac 2 months ago
that pvc cutter = amazing! That box is a great addition to the van. Shall I say, "It is the poop"
NorthwestIndianaFish 5 months ago
@NorthwestIndianaFish Hey whats up !!!
Man that cutter makes it so easy , no saw or pvc shavings everywhere !!!
Thank You so much for the Great Comment !!!
fritzhvac 5 months ago
Tools, Toys and a tour of the van!! Don't get much better than that dude!!!
It's nice to see a van where you can see the floor!!
Great vid Fritz
droptuneblowout 5 months ago
@droptuneblowout Hey whats up Brody !!!
Hope all is well my Friend !!!
The Arsenal keeps Expanding !!! LOL ...
I try and stay up with her , it can get away from you Quick !!!
Thank You so much for the Great Comment Brother !!!
fritzhvac 5 months ago
damn thats a nice setup you have there
dustinnop 5 months ago
@dustinnop Hey Dustin !!!
Thank You ver much !!!
fritzhvac 5 months ago
Hey Fritz!! I have watched this a few times now and just realized I never left you a comment on one of your best videos!!
That PVC cutter is amazing!! Cuts through it like it was nothing!! I know you were glad to get that in the collection!!
Brother, you have one awesome tool inventory and the E350 is the most organized and well stocked service van I have ever seen!! I am digging that box you built out of fence wood. That is awesome!!
Great video and very generous of you to share this!!
AVTreasures 6 months ago
@AVTreasures Hey Ray !!!
Whats up Brother !!!
The PVC Lopper is the You know what !!! LOL ...
My E-350 Super Duty is my Pride and Joy my Friend !!!
Man that was before the New Hinge you sent me !!! (Drove me Freakin Nuts, Thank You Ray) LOL ...
Man I love my Fence Box !!! Great Catch all !!! LOL ...
Ray that took me Several Years in the Trade , to acquire those !!!
Thank You so much Brother !!!
fritzhvac 6 months ago
you must get a bunch of calls.I'm aiming to get to your status once I finish hvac school next spring.
ConservativeGamerC 9 months ago
@ConservativeGamerC Hey whats up Jerol !!!
You will get there Brother , just keep applying yourself !!!
The Best of Luck to you my Friend !!!
Thank You very much !!!
fritzhvac 9 months ago
Do you have a vacuum pump in there?
3Mudbone1 9 months ago
@3Mudbone1 Hey whats up man !!!
She's in there somewhere !!! LOL ...
Got Her in my Latest Videos !!!
fritzhvac 9 months ago
I have the Milwaukee pvc cutter too! How the hell did we live without it? haha I'm only 24 but the hand cutter was murdering my hand and wrist. Is the video quality good on your inspection camera? Also which Fieldpiece is that, the HS-35? Van is looking awesome, too bad we have to turn them into forts to keep tools huh? Awesome video man, you keep making them and I'll keep watching them!
JSHVAC187 1 year ago
@JSHVAC187 Hey Justin !!!
Man I tell you what Brother , that PVC cutter is the SH!T !!! LOL .
I don't know what I would do without her now !!!
Camera is OK , but not what I was expecting , but OK !
Fieldpiece RULES !!! yea she the HS-35 , another tool that is a must for us HVAC tradesman !
Man Freakin thieving bastards around here , are stealing everything now !
Hopefully my lights , my locks ,my alarm system , and especially my Dog Sarge will keep em at bay !!!
Thank You so much Justin !
fritzhvac 1 year ago
I didn't see a valve core removal tool....get one with a ball valve....spare cores and brass caps....also, if you don't have a good cable lock for your roof rack, your ladders could end up in a pawn shop....and lastly, a good set of nutdrivers...1/4, 5/16 and 3/8 ths at a minimum
cameron030362 1 year ago
@cameron030362 Hey whats up man !!!
I guess I didn't show my hole arsenel , Hell I still got my first set of nut drivers ,there in retirement , using Klien Now !!! LOL ... I dig on locks brother , we have alot of thieving going on here , I have them chained down , I show that on another video . Man I have sinse added Testo 550 , SRH2 , Yellow Jacket tubing expander , Yellow Jacket Tubing Bender !!! AND a BROOM !!! ROFL ...
fritzhvac 1 year ago
@fritzhvac I got the valve core remover , but you are right , I do need to update to the one with the Ball Valve !!!
Thanks for commenting !!!
fritzhvac 1 year ago
LOL i thought i was the only one that tried to think of the next guy in line.Never heard anyone say that but me lol. Untill this video.. Glad to know im not the only one....
Darvin1964 1 year ago
@Darvin1964 Hey Brother , hope ya had a good day today !!!
I install or service everything like I was puttin it in for my mom !!! I always try and think of the next guy my friend , heck I might actually be the next guy !!! LOL ...
Sounds like great minds think alike !!! LOL ...
Thank You man !!!
fritzhvac 1 year ago
Great tour of the van. I appreciate you, sharing your knowledge, and experience.
blissJesus1 1 year ago
@blissJesus1 Thank You very much my friend !!!
I kinda do these to help me , and the new people to our trade , plus they give me a great reference to go back too in the future !!! I am still learning something New Everyday !!!
Thanks again man , have a Great Day !!!
fritzhvac 1 year ago
solder? dont forget it
gst69man 1 year ago
@gst69man Hey whats up !!! Sorry I did not get right back to ya !!! I use brazing rods 95% of the time , but you are right , every now and then I do use solder !!!
Thank You very much for viewing !!!
fritzhvac 1 year ago
stop smoking so you can be around longer great video
eagletek1 1 year ago
@eagletek1 TOO COOL !!! Thank You my New Friend !!!
fritzhvac 1 year ago
thats a damn nice kit man!, keep it safe!.
good quality tools last a lifetime! :D
Aussie50 1 year ago
@Aussie50 Hey Ed , how are you my friend !!!
Thank You !!!
Got a good puppy and a few other things !!! LOL ...
fritzhvac 1 year ago
This vid is so great that youtube waived the 10 min max requirement. Just picked up the 550 myself... I think I'll leave it in the case... don't want to break it. I snagged the same hose set you got... I think... 5 ft ball valves??
FilterChanger 1 year ago
@FilterChanger HELL YEA they did , TOOL VIDEO !!!
They are allowing me 15 min from now on !!! ROFL .....
Man they will enlightening any man seeking KNOWLEDGE !!!
Unbelieveable brother !!! I'm storing hoses separetly , got some velcro !!! LOL ...
72 " baby ,got to have he ball valves !!! LOL ...
fritzhvac 1 year ago
Nice, nice, nice. You got a well stocked van there brother, those AO Smith Master Fit blower motor's are the best I think, Those are the same ones I stock on my truck. Thanks for video.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit Man you are to kind , do you know of anything else I should be packin Service Wise ? Dallas told me about a few relays , and boards I could get from Johnstone supply , but told me I should be cool till winter !!!
Cool if my brother is packin A.O. , I feel more confident !!! I appreciate your videos , and my other friends on here , I am learning so much from yall !!! You do GREAT WORK !!!
Thank You again my FRIEND !!!!
fritzhvac 1 year ago
@fritzhvac I seen a turbo 200 run cap, you should have a turbo200x as well, but you have alot of splits there and Dallas would know more about splits we have a ton of rooftops, but i do carry a TXV kit that covers 1.5 ton to 5 ton in both R22 and R410A, but you have all you need it seems. Nice van. And Thank You for the good feed back my friend.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit Hey man , we got rained out today , might head to brothers to install the rest of furnace vent , I needed a 4 to 5 reducer to finish , he said he really would not be using the furnace in 102 degree temps !!! ROFL ... I got tee capped at water heater so they got hot water !!! Man tell me more of TXV kit ? Can I get one of those or two one threaded and one brazable ?
Not a problem brother , I mean what I say very very impressive work !!!
You are the VU !!! Lol ...
fritzhvac 1 year ago
@fritzhvac Thank you Fritz, and there was one tool I did not see in your van the VUVU lol.
Nutintoitbut2doit 1 year ago
@Nutintoitbut2doit Dude I keep that in the House , you know better !!! LOL ...
Drag the Vu out only when needed !!! ROFL .... Just got back from brothers , piece of cake !!!
fritzhvac 1 year ago
That is one well-equipped horse you got there, Fritz! The 'dimpler' you showed on the sheet metal bench is what I call a 'snap-lock' or 'button-lock' tool. Very handy to have when doing sheet metal work. Don't worry about the benders, flaring tools, micron gauge and other specialty items just yet. There's plenty of time to buy them as you need them.
PutSome5tankOnIt 1 year ago
@PutSome5tankOnIt Hey BROTHER , how are you my friend !!! I was hot had a brain fart (98 degrees in Fern Creek today , talkin triple digits) , LOL , that makes sense snap lock , I have actually taken that tool and made my own field duct !!! I should of given you your props on saying , check with parts house on free stuff , thats how I got red Panduit gun , sorry !!! LOL ... Man I kinda KILLED my budget , thanks for saying that , they will come with time !!!
fritzhvac 1 year ago
@fritzhvac I ALWAYS ask for free stuff. The answer is always "NO" if you don't ask, right?
PutSome5tankOnIt 1 year ago
@PutSome5tankOnIt Hell YEA my brother !!! Man since the economy has turned your lucky to get a note pad , and a pen !!! LOL ... Man I remember when we would at least get a couple of those tiny T-Stat screwdrivers ,and baby levels !!! Got lucky with panduit gun , I held the door open for the dealer !!! ROFL ...
fritzhvac 1 year ago
Thank You Dallas , you have been in the trade for a long time , you have to acquire your tools , it takes years to get what you need , and there is something always coming out you want !!! LOL ...
fritzhvac 1 year ago
Nice set up you have there! Man you have alot of tools!!!
dizziedallas 1 year ago
@dizziedallas OOP'S , I did not hit the right button , left your return comment above sorry Dallas !!! Hell I'll say it again , it takes us YEARS to ACQUIRE the specialty tools we require !!! TESTO rules !!! Thanks again Dallas !!!
fritzhvac 1 year ago