Fresno SCCA Drift event with Vq35de swap 240sx

[snydermotors]

Badass car, badass driving

[JDMJDK]

Forget "teswoleone", awesome soundtrack! I need a VQ swap or even a possible 1uz V8, A heavy metal swap is always the legit choice. Im doing an 2wd 84 Yota 4WD sheetmetal truck w/ IRS. Heims, urethanes/Brass, swaybars etc.

[dbrv04]

did you had to do alot of mods to the chassis

[MrChico929]

my ears came a little bit...

[TEHSWOLEONE]

Could have done without the shit music.

[enigmaticengineer]

Nice. Looks like it was a blast. could have done without the car mods intro, list that in the description...

[chetazo]

thumbs up if you hate those "how much money cost you" shit, and those "thumbs up if you.." shit comments

[MrRpalm69]

damn one nasty bitch, absolutly terifing, has the bad ass sound and sexy 240 look

[OooCHUBZooO]

F****NG RICH B****H I BET MOM N DAD DIDNT KNW WHAT WHERE PAY'N 4

[sypherslayer]

@OooCHUBZooO dont be a hater just cuz someone has something nicer then you. suck it up and do something of your own

[OooCHUBZooO]

F****NG RICH B****H I BET MOM N DAD DIDNT KNW WHAT WHERE PAY'N 4

[putampoco]

how do you get that engine??? :O

[bebop00]

I'm going to be doing this swap on my 98 S14 in the future

[The89F250]

thanks for tellling me now i can try my best to find one

[The89F250]

how much did the motor and trans cost if u dont mind me asking cause i got this 93 mustang lx hatchback that i want to take the motor out and put something that will get it going

[jimxiong04]

@The89F250 motor and trans cost me around 4000. i had to find lots of missing parts on it.

[JoshW23]

@The89F250 how about a 351W or a nice built 302? this isn't tokyo drift buddy........

[MrChico929]

@JoshW23 negative ^^

[chris13954]

how much were ur spacers?

[jimxiong04]

@chris13954 spacers for the hood?? or sway bar spacers?

spacers for the hood can be used with just washers.. and sway bar spacers we have in stock.. $80 plus $10 shipiing.. all aluminum cnc ...

[chris13954]

@jimxiong04 i was thinking wheel spacers if u have any lol

[jimxiong04]

@chris13954 .... i didn't have any wheel spacers.

[turboxtcx]

@jimxiong04 i want one of these bad lol i have a 350z but that shits to pretty and expensive for me to drift and beat the shit outta just curious i have the 06 rev 350z and am wondering does the motor and tranny pull pretty hard stock? what lsd? and how does it compare to a 350z drifting? just curious because im falling back and forth between a 240sx or ae86

[winescargo]

did you use the 6-speed tranny? if not, what did you use

[jimxiong04]

@winescargo we did use the 6spd transmission. it can hold good power.

[jimxiong04]

@TXmatrix2nr svperformance custom engine and tranny mounts and svperformance custom driveshaft.... no issue with firewall but did have to use spacer for hood. that's about it. check out our other videos

[jimxiong04]

@TXmatrix2nr svperformance custom engine and tranny mounts and svperformance custom driveshaft.... no issue with firewall but did have to use spacer for hood. that's about it. svperformance. net

[pingyg]

dame that 240sx is a beast and has hella torque keep up the good work guys I live an hour away and I will bring my Kat too!!! by the way who's the Hmong band?

[jimxiong04]

@pingyg thanks. the car is up in portland now. im originally from oregon. lol.. hmong band is mos hlub. old school guys. heavy metal

[ahyahyahy]

im gona guess thats some jdm rock n roll lol horrible.... haha should run some bigger rubber in the rear man! front has more lol

[jimxiong04]

@ahyahyahy haha.. it's hmong rock.. only song i can put on without getting the audio mute. and i didn't have any other spare tires.

[makavelishaman]

dang nice car and drifting dawg this is more like it

[brandyglasshalffull]

stock headers clear?? considering this swap, but live in cali and thats a requirement to pass bar. it needs to be completely stock down to the headers.

[jimxiong04]

@brandyglasshalffull not on this particular swap, we had to modify. but we are developing a new kit right now and it does clear the stock headers nicely! we are still in the process of getting a production run. stay tune on SVPerformance. net

[brandyglasshalffull]

@brandyglasshalffull

would it be possible to "massage" the trans tunnel or where ever they might hit?

[pabloseba35]

nice swap, I'm getting bored of my SR and might do this, too bad Is going to make less power unless I do something to it.. idk so many things you can do with the 240...

but congrats, sounds really nice I just wish the music would let me hear it....

[jimxiong04]

@pabloseba35 you should do this swap. it's alot of fun.. mad torque!!

[ISeanzyyyI]

@yos3z i actually like the way it sounds. nice and raw.

[TXmatrix2nr]

haha the song is tight...blah blah blah ROCK N ROLL.....nice car btw ive been considering this swap over an RB bc it looks like the engine sits further back for better weight distribution

[jimxiong04]

@TXmatrix2nr yeah the motor does sit back further because it

s a v6 vs staright 6. and the motor is much more lighter than a rb. you;ll be satisfy!!

[EmperorBenzRx8]

is the hood always gunna look popped? is the engine too big or something? It kinda ruins the look a little dont ya think?

[jimxiong04]

@EmperorBenzRx8

i actually love the way the hood pops up. it gives it a different look. but yes the plenum on the vq is sticking out.

[jimxiong04]

no need for money wasting titanium mufflers. good old steel pipe is goog enough. sounds raspy cause no cats!

[truslider]

song is badass!!

[jimxiong04]

lol.. only song i can find on my cousins computer that youtube wouldn't delete.

[boostinFTW]

texas like i would rather a shop do it for sure

[boostinFTW]

how much would it cost, i think im gonna do that swap lol!

[jimxiong04]

depends. if your gonna do it yourself or have a shop do it... where are you located?

[boostinFTW]

how does one go about swapping a VQ into a s13 coupe?

[jimxiong04]

it's actually a really fun motor and in a pretty light body it's amazing. plans to turbo by this summer.

[Nicolas35666]

I like this its my futur car xd i have 200 sx but y don't have VQ35DE good luck for the next with you car

Sorry for my english in french

[jimxiong04]

thanks. hope you can find a vq35de

[Nicolas35666]

thanks ;) after buy VQ35DE i create VQ42DETT and fun wisth burn machine but for this moment i d'ont have money beaucause i m étudient and i have 20 years old lol

It possible to speak with MSN or mail I will want to know how you succeeded has to bring the VQ to the level of the electrical loom

Sorry for my english

[jimxiong04]

sorry i don't know the electrical. i had a friend wire it for me. sorry

[Nicolas35666]

Ok thank you nevertheless good luck for Al continuation with this monster

[SDM05]

dang i wanna go to cali now you now how it is in portland only place to practice is the streets fack lol

[jimxiong04]

yeha i know what you mean... there's a event this sunday at willows, ca. north california. 8 hour drive from oregon. it's gonna be a cool event.

[SDM05]

broke man it sucks.... my coupe not running right im looking for a dual cam no luck tho???? btw you improved alot good job

[81DxxxD18]

Damn man love the swap, I've gotta an

S14 I"m doin the same swap with. sick drift vid too keep tearin it up and postin em up

[jimxiong04]

thanks for the comment. good luck with the swap. you';ll love it. loads of torque!

[VQ35S14]

NIce driftin. you have a LSD or a welded?

[jimxiong04]

i have a welded diff in this event! i might do vlsd next one and try it out

[VQ35S14]

the welded is gonna be the best. I have had mine welded for like 2 years no porblem, the vlsds unhook and you basically have open (while drifting) welded is the only way to go!

[jimxiong04]

i do have to say i am use to welded diff.. never fails. i've daily drove and drift welded diff for 3 years. but vlsd is awesome for daily driving. i can still drift it when i want too.

[VQ35S14]

true and it doesnt beat the hell out of your axles. expecailly all the noises lol

[sc88mr2]

NICE DUDE!

[onemothafucka]

what are the streets for this place?

[jimxiong04]

this is at the fresno fairgrounds.

[onemothafucka]

iight thanx bro got to check this place some time

[unhapyxangel]

I really dig this music and sound man.

[jimxiong04]

yeah. old school hmong rocknroll

[annachickify]

hey buddie jim this is kewl...i wanna go see it live some day hahah

[brendan90zx]

nice! perfect, we will have to do it again!

[83maryxiong]

that's pretty sick jim!!!