TechT Paintball iFit Barrel Sizer Kit Review by HustlePaintball.com

[opulentpaintball]

when are u guys gonna put up the videos when u recorded at blitz on sat.

[HustlePaintball]

@opulentpaintball It could be some time - we're super backlogged w/ videos.

[opulentpaintball]

im having problems that my paintballs are going to the right or the left do u know if this solves that and i live in colorado to cause ive got a etek3 am with techt bolt and they were recording today for youtue and i was in it a bunch if u watch the videos i was in a blue proto jursey and pants with red proto bandana if u see me but ya does the techt ifit solve that. (it was not windy)

[HustlePaintball]

@opulentpaintball While the iFit will help with that a bit, however that kind of thing is best solved with non-dimpled paint. -Jay

[HustlePaintball]

@opulentpaintball While the iFit will help with that a bit, however that kind of thing is best solved with non-dimpled paint. -Jay

[HustlePaintball]

@opulentpaintball Hey man, I remember seeing you out there. I was using my TECHT iFIT on my CCM T2 pump all day and was shooting ridiculously accurately. What Jay said about using good, non-dimpled paint is SO true. I was using Valken Graffiti, and it was truly awesome -Ethan

[rlam67]

ACCURACY WOLF



[ForTheWinaIIDay]

So I have a DP E1 with the stock barrel, which is a one piece and I think 10 inches. Should I buy this kit and just use this barrel, or should I also get a better barrel? I'm just afraid the barrel sucks so much that it wont help.

[HustlePaintball]

@ForTheWinaIIDay I would strongly encourage a new barrel, while the stock DP barrels are not bad, a high quality one will be a more noticeable improvement for your money. -Jay

[Bulldawgsify]

For the threads what thread would an invert mini be?

[HustlePaintball]

@Bulldawgsify The Empire Mini has Autococker threads. Let me know if you have any other questions!

[joe35664]

but will it fit a kingman spyder VS3

[HustlePaintball]

@joe35664 Absolutely - just make sure you get the Spyder version, and you'll be all set.

Remember that you can also contact us at support@hustlepaintball(.)com with any questions or comments that you may have.

[Yumyumtuna]

Pause at 6:47 and compare groups. The non-iFit group was hardly effected when he shot fast, but on the iFit's turn it about doubled the group's size.. no fault of the iFit, he just happened to sway a bit more on the second go of fast firing. Picking one up as soon as I can, pewpew!

[HustlePaintball]

@Yumyumtuna These are a great investment for sure!! All the guys on the factory team use them, and have nothing but great things to say!

[Yumyumtuna]

@HustlePaintball Always good to hear that, thanks for the video!

[SeanofZeus]

too bad thier logo is on the ouside....thats one major thing I love about lapco kits....they dont have the logo on the outside

[luisp256]

@hustlepaintball what threads does the project salvo use?

[HustlePaintball]

@luisp256 The Salvo uses 98 threads.

[HustlePaintball]

@pntballman1 The freak kit has longer inserts and really is a barrel kit in and of itself, whereas the iFit kit can fit with any existing barrel you are using. I prefer the iFit kit for that same reason, I like my barrels and I don;t want to buy a new one just to use a sizing kit.

[HustlePaintball]

@pntballman1 PM'd

[HustlePaintball]

@pntballman1 The adapter is around 2 inches long so it will make the barrel a little less than 16 inches total. It really isn't too long, it wont affect the accuracy of the marker or change anything really.

[kbsmok420]

I love girls who play paintball.

[bringindarain1]

will the phantom threaded kit require an undercocking kit, or can it use the stock pump?

[HustlePaintball]

@bringindarain1 You'll have to get a different pump.

[haffordj]

Ching, you should get a wired lapel microphone. It would make the audio sound even better :)

[HustlePaintball]

@haffordj Thank you for the advice!

[DigiTPXer]

If you have an adaptor say 98 to a5 or a5 to cocker can you still use this kit

[HustlePaintball]

@DigiTPXer Yes, it matters what the final threading is. If you want to use your A5 to Cocker adapter, you'll need a Cocker kit.

[mich3720]

So will this fit on my TM-15... pretty sure it is the correct thread

[HustlePaintball]

@mich3720 Yes, the Autococker iFit will fit the TM-15

[morolen]

Thats alot of iFits :D

[aamassy]

that T2 needs a T2 slot blocker!!!

[sandmanx187]

it's works. but it's a small bore length as far as the insert length.

[TheStealthySnipe]

would this have any improvment on accuracy with a scope?

[Yumyumtuna]

@TheStealthySnipe Well of course, with any kind of refference point as to where you're shooting (iron sights, red dot, magnified scope) you'll be able to put your first ball where you want it.. as for accuracy in terms of an actual GROUPING, no.

[HustlePaintball]

@TheStealthySnipe The effect that a scope has on accuracy depends on how well the operator can use it.

[Django333]

@TheStealthySnipe

Scopes on a paintball gun are completely useless and will probably hurt more than help due to the tendency to "sit" in the scope.

[TheStealthySnipe]

@Django333 I must disagree. I have used a scope on a paintball marker multiple times. For me it worked excellent.

[Yumyumtuna]

Very cool! Anyone know the barrel threads of a T68?

[aamassy]

@Yumyumtuna I think its spyder threads.....but double check that before you purchase the adapter...

[Yumyumtuna]

@aamassy Yeah I've heard that, thanks!

[HustlePaintball]

@Yumyumtuna The T68 line uses Spyder threads.

[Yumyumtuna]

@HustlePaintball Awesome, thanks a tonne!

[necramoniumdotc0m]

Techt really is becoming a great company... Still enjoy their Tippmann 98 ACT zero kick hammer.

[snapshootpaintball33]

whitch etek?

[barefootmax729]

@snapshootpaintball33 etek 2 I think

[ANoobsGuide]

@barefootmax729 etek3



[ANoobsGuide]

@ANoobsGuide etek 2.

[barefootmax729]

@ANoobsGuide Well I never saw an etek 3 with that type of colors

[ANoobsGuide]

@barefootmax729 its an etek 2.

[barefootmax729]

@ANoobsGuide thats what I said

[coronadopballer]

@snapshootpaintball33 thats an etek2

[vivalarazaholmes619]

nice!