where can i buy an unfinished kramer body so i can make myself this guitar?? im thinking of just using a strat body but dunno if that would look right.... please somebody give me some advise
@Marshallstack3203 after painting i wait 1/2 to 1 hour before pulling the tape. i usually spary 3 coats to get a solid color. on the black i try to just do 1 coat. so it's not so thick.
@Marshallstack3203 spray primer wait 24 hours. spray white coats wait 24 hours. lay the tape design then spray the red, wait 1/2 hour then pull the tape. wait 24 hours then lay the tape design for the black tape, then spray the black, wait 1/2 hour then pull the tape. wait 48 hours before starting the clear coats. start with very thin coats. if you get a run in the clear in the beginning it may make the color coats run aswell. after the fist 5 or 6 coats it should be ok.
well done lovely clear straight lines no paint runs or smudges looks like a lot of hard work . . . . i have done this to about ten guitars over the years . . .. its exciting to see end result . . . again well done great job
@nosmoking099 no, no sanding untill after the clear coat has fully cured. there is no need to sand the paint coats. the wetsand on the clear coat will even thing all up.
now i undertsand the high price = )
HermerTV 2 months ago
where can i buy an unfinished kramer body so i can make myself this guitar?? im thinking of just using a strat body but dunno if that would look right.... please somebody give me some advise
upperthongjb 3 months ago
How long do you wait after painting to pull the paint and about how many coats per color?
Marshallstack3203 4 months ago
@Marshallstack3203 after painting i wait 1/2 to 1 hour before pulling the tape. i usually spary 3 coats to get a solid color. on the black i try to just do 1 coat. so it's not so thick.
vanhalen5150jhs 4 months ago
@vanhalen5150jhs So do you wait the 24 hours for the paint to dry and then wait an hour or a half hour after that to pull the tape?
Marshallstack3203 4 months ago
@Marshallstack3203 spray primer wait 24 hours. spray white coats wait 24 hours. lay the tape design then spray the red, wait 1/2 hour then pull the tape. wait 24 hours then lay the tape design for the black tape, then spray the black, wait 1/2 hour then pull the tape. wait 48 hours before starting the clear coats. start with very thin coats. if you get a run in the clear in the beginning it may make the color coats run aswell. after the fist 5 or 6 coats it should be ok.
vanhalen5150jhs 4 months ago
wouldnt have been easier to do it the other way like eddie did with black first?
012jack012 4 months ago
@012jack012 eddie on did the black first on the Frankenstrat not the 5150
vanhalen5150jhs 4 months ago
did you put a clear coat over the whole thing once you were done?
greencatsick 7 months ago
@greencatsick yes
vanhalen5150jhs 7 months ago
@vanhalen5150jhs really? eddie didnt
012jack012 4 months ago
I was thinking of putting this kind of paintjob on my airsoft gun.
tehhkrmn65 8 months ago
@tehhkrmn65 same idea i had bro
itstheDiNoSaWr 6 months ago
I'm gonna paint everything I own like that.
I'm drunk right now though, let's see how I feel about it in the morning.
metalhoops 8 months ago 2
@metalhoops good idea, no regrets. lol
vanhalen5150jhs 8 months ago
well done lovely clear straight lines no paint runs or smudges looks like a lot of hard work . . . . i have done this to about ten guitars over the years . . .. its exciting to see end result . . . again well done great job
peterfalahee 8 months ago
thanks
guitarman06661 8 months ago
Excellent video!
automatics1im 9 months ago
wat song is at the beggining???
utubeThatOneBand 9 months ago
@utubeThatOneBand Somebody get me a doctor =VH=
vanhalen5150jhs 9 months ago
very cool what kinda paint and clear coat did you use?
bllhaynes 11 months ago
@bllhaynes Rustoleum Lacquer spray paints. same for the clear.
vanhalen5150jhs 10 months ago
do you have to sand the paint back after each colour to make it smoother?
nosmoking099 1 year ago
@nosmoking099 no, no sanding untill after the clear coat has fully cured. there is no need to sand the paint coats. the wetsand on the clear coat will even thing all up.
vanhalen5150jhs 1 year ago
were did u get the body.
vhslash5150 1 year ago
@vhslash5150 kissmyaxeguitarsdotcom or on ebay from seller kissmyaxeguitars they are a complete guitar unpainted for around 180.00 with shipping
vanhalen5150jhs 1 year ago