@iNordli18 slow down the pink circuit (i can run it fine on my server), but i still put them all to +1 delay (2 ticks) to slow down the movement and make it almost never glitch.
Do these timings and everything work on servers? Or does the lag kind of mess with most of it. Same thing happens with the secret stairs and 4x4 piston door so far.
When you build the buttons above its easier to connect the bottom button without the torch so you give it an impuls and you dont need an inverter right?
Um problem... I had to add 2 pieces of glass at the top where that piston that comes out but isnt supposed to pop up where the wall should go. If non transparent blocks are there it powers the top one and screws up the power....
Alright so I made the elevator twice and both times i keep gettin knocked out of the elevator I tried it on my server and on my singleplayer does anyone know what to do
Well, I got it to work for the most part. It goes up and down correctly, but in order to go up, I have to jump to stay in the elevator despite have a TWO tick delay on each. Even then, I get stuck in the middle of the elevator. I tried at the fastest tick with the two blocks where it shows, and I still get kicked out of it. Tried the gates, same result. On any setting I can jump and go, but I keep getting stuck in the middle of it. :\ Any ideas to help?
@MrSoupcup I'v got the same issue, Spent all morning building this thing to exact specs. The elevator works, i can go down fine but I'm always stuck in the pistons while going up even with fence gates and delays. I'm on multiplayer server with 1 other friend, i dont get it.
So what redstone do I need to change if a lift piston is left pushed out and does not retract when the down button is pressed? I have 2random regular pistons that do not retract and ruins the whole system... I'm on 1.1
@TheEfthyy I did the 1.1 fix but i still have a few random pistons that do not retract on the way down. any redstone tips for that? not too experienced with it yet and the wiring looks fine when I go back and check.
@ckreature420 well if you followed his design exactly and then do my fix at the end it will work. so you have either placed some redstone wrong OR if you have a redstone creation directly next to it then it could be affecting the circuit (very unlikely but i dont know what your setup is). I would suggest looking at the second last repeater i placed in the video, have a look at that one on each level and make sure they are all repeaters and have no delay.
you only show how to do it 9 up , any other height and the green/red circuit is defferent and i dont know what to do , please show how to do it if the blocks were reversed for those 2 circuits
i figured out my problem i was doing it wrong ( i am trying to build this in a redpower 2 world mod's volcano and when it gets night time in the game it gets super dark in the volcano)
At about 13:00-14:34 i got lost because for some reason the right side pistons of the elevator went up and went down, but the left side is stuck pushed out, and I don't quite know why. Please help.
@shaked4ziv It looks like 1.1 made it so that the first piston pushed out of the wall is - at least on Multiplayer servers - powered, which activates the piston underneath it (which eas just purely for decoration originally). Replace that piston with another block, and it should work as normal.
Is there a way to ascend (go up) slower? its so fast it keeps kicking me for "hacking" saying im moving to fast lol. I followed these perfectly and it works (on descending at least) but i cant ascend since its to fast. :P Would really like your help for this one.
@TheDennyBros Since he hasn't replied yet, I'll try and help. try adding one ( or more if needed ) repeaters to your circuit to add delay, and even further the effect more by ticking up those repeaters. Not sure if this would work and I'm a redstone novice but it's an idea.
@pane36 OK i figured out adding and extra repeater behind the repeater that is directly behind the sticky pistons on the right side >4x2< on the blue circuit and just adding extra wool to the end so it looks like the left side with that extra piece on it slowed it down a bit.
@pane36 but im still having one trouble which i thought was because of the speed, idk still but i keep ending up being pushed off and into the blocks infront of me then i get stuck. iv tried many different wall combos and stop this but nothing is working.. i dont know why its being so hard on me for
@ibreathwaterpolo Nope, didnt work for me :/. its cool now tho, i just scrapped it and am buildy a simple up 1 and then using my own design for a down one.
Ok so i fixed the infinite loop problem but now I'm getting f*'d around by the ascension, it pretty much goes up faster than me and I get stuck on the third or fourth piston going up and get crushed and die :(
i meant green > pink > blue, erh. The elevator pistons retract with the green wool but then just pop out again instantly, every time this happens I have to remove all the green wool and replace it. (Mind you my elevator is from bedrock to sea level) but then after trying to go down again the pink circuit makes an infinite power loop and I cant go down.
Right, I'm having a problem with the green circuit. I'm not great with redstone, but I need a way for the top repeater to face the opposite direction. What happened was that I exceeded my maximum allotted space, so I ended up with a repeater on the floor where it shouldn't be, which is activating redstone it shouldn't. I need help :c
@MrJonim1 I had same problem. Friend told me it was because the power was going through my stone block. I guess certain blocks are conductive. I put glass in instead on the side of that piston and it isnt activated anymore.
I really wish someone would make a real elevator room that you get into and the room moves u to the desired floor you want. Not one that just shoots you up to the top of the world. Id like to make a skyscraper with many floors that they elevator can stop at.
Great tutorial as usual. I just wish I'd listened to the bit at the end about it not being great for multiplayer before spending a few hours building the thing. Oh well lesson learned
This can work if you did as I did when I found out that this didnt work, though the buttons in 2nd floor is not at the same places as in 1st floor. But definetly the best elevator out there.
If 50 thumbs up I can make a video on how to change it from this to something that will work.
Hokay!
gilshahar7 9 hours ago
I wanna see your SMP elevator, i've been looking for one for too long.
S3maxime16 13 hours ago
ok built entire thing in a multiplayer server.... and at end of video he says it doesnt work. please say that 1st next time gf 2hrs
Mutulu123 13 hours ago
5 min? :D
leejeff120 1 day ago
go to 00:45 for the beginning of the tutorial
utubemachine1 2 days ago
@utubemachine1 tx for saving me 45 seconds... wow
dfgchjhkbnl 1 day ago
@57kidslayer just replace the top piston with a block and it should work fine
icokidd 2 days ago in playlist Favorite videos
How do you place blocks that are like 50 blocks away from you?
habbocal 2 days ago
@habbocal there is a mod called single player commands ya kno? there is a command called "reach" just write reach 50 or something..
utubemachine1 2 days ago
does this work on minecraft 1.2.3??? Please help.
57kidslayer 2 days ago
Why I can't convert your maps to new Anvil file? When I try it black screen splashes up. :(
TheJakooz 3 days ago
thanks a lot dude you helped me a lot
masterrcxd 3 days ago
you have to keep walking against the wall when going up
mMPMSFMm 3 days ago
and if my elevator is super tall?
amit740 4 days ago
i have problem with red circuit all the redstone on green circuit connecting to the red circuit 1 what do i do?
amit740 4 days ago
4:15 you missed one (comment made at 4:29)
mMPMSFMm 4 days ago
the repeater when you push the button for the up button wont turn on how do i fix this?
justin17915 4 days ago
Where do you get your sandstone flatworlds?
adamcoastercrazy 4 days ago
@adamcoastercrazy MCEdit
pokemaniac797 3 days ago
does this mean it has to be an odd number of levels?
ech0h 5 days ago
you are an expert :p ^^
xPureSpank 5 days ago
do u have to use sandstone
procast9 5 days ago
@procast9 no...
TheFesmenia 5 days ago
@procast9 no you dont haha you can use any material
ech0h 5 days ago
Please help me out I followed your tut exactly block for block and when I use my elevator it stops me half way
TheASDFchronicles 6 days ago
I'm not able to take the elevator up on server...
iNordli18 6 days ago
@iNordli18 slow down the pink circuit (i can run it fine on my server), but i still put them all to +1 delay (2 ticks) to slow down the movement and make it almost never glitch.
TheEfthyy 6 days ago
@TheEfthyy I tried to slow them all down, but still i won't work. Maybe the server is too slow...
iNordli18 5 days ago
Do these timings and everything work on servers? Or does the lag kind of mess with most of it. Same thing happens with the secret stairs and 4x4 piston door so far.
TheMoleTractor 6 days ago
Ugh... I can't build this...
I'm having trouble with the red circuit.
thingyguy1 6 days ago
So I'm just going go back to building my dirt hut...yeah...
legoable1 1 week ago
Score: +1 subscriber. Congratulations.
duncanheid 1 week ago
Ho-kay
RogLichKing 1 week ago
I love it when he says "A bit like that."
pazbushmonster 1 week ago
What about a bukkit server thats runs full time?
Programmer329 1 week ago
This has been flagged as spam show
I got another problem
When use my elevator i slip off
Please help!!!
MrD2God 1 week ago
When you build the buttons above its easier to connect the bottom button without the torch so you give it an impuls and you dont need an inverter right?
TheRealZeroks 1 week ago
my brain hurts
zbop2000 1 week ago 11
@zbop2000 mine glows!
SirDiggalot 2 days ago
Its work fucking not.
magn6357 1 week ago
Y U SO smart?!
xThAtLoCoKiD 1 week ago
make an fast elevator for the new 256 block height :) itd be cool to watch
0monahan85 1 week ago
watch?NR=1&v=m5GoZjdL1RM&feature=endscreen
jent888 1 week ago
This works in SMP?
Drkspeedy 1 week ago
Um problem... I had to add 2 pieces of glass at the top where that piston that comes out but isnt supposed to pop up where the wall should go. If non transparent blocks are there it powers the top one and screws up the power....
DrH0rr1bl3 2 weeks ago
DUDE, POS, does't even work....
dquimby1 2 weeks ago
08:53
falckeredet 2 weeks ago
Alright so I made the elevator twice and both times i keep gettin knocked out of the elevator I tried it on my server and on my singleplayer does anyone know what to do
tadesse311 2 weeks ago
Best ever!!!
PedroNinjos 2 weeks ago
Do this in 60 seconds!
ERYFilms 2 weeks ago
VERY CONFUSING
MrBrenno147 2 weeks ago
people of minecraft in his world save look at his elevator v3 it does not have the problem with the last piston block
kserug 2 weeks ago
Comment removed
kserug 2 weeks ago
how would you do this for multiple floors?
KrunkzGaming 2 weeks ago
it goes up before i can get in
please help
awesomeminecraft217 2 weeks ago
is it posible to make like 3 stories that you can also use the same system?
TheSammieGuy 3 weeks ago
Build it on single and multi player . Works fine both
Zippaa11 3 weeks ago
how did u place a block so far at 1:39
oyyooyyooy 3 weeks ago
@oyyooyyooy /reach 1000000000
legofan431 3 weeks ago
@oyyooyyooy single player commands: reach (whatever number he put)
huntrovherobrin 2 weeks ago
Well, I got it to work for the most part. It goes up and down correctly, but in order to go up, I have to jump to stay in the elevator despite have a TWO tick delay on each. Even then, I get stuck in the middle of the elevator. I tried at the fastest tick with the two blocks where it shows, and I still get kicked out of it. Tried the gates, same result. On any setting I can jump and go, but I keep getting stuck in the middle of it. :\ Any ideas to help?
MrSoupcup 3 weeks ago
@MrSoupcup same problem :\
Cybertwood 2 weeks ago in playlist Liked videos
@MrSoupcup I also have the same problem
maximans45 2 weeks ago
@MrSoupcup I'v got the same issue, Spent all morning building this thing to exact specs. The elevator works, i can go down fine but I'm always stuck in the pistons while going up even with fence gates and delays. I'm on multiplayer server with 1 other friend, i dont get it.
SDevolutionVIII 2 weeks ago
@MrSoupcup Same, anyone know a fix?
irradiatedCannibal 2 weeks ago
do this in 60 seconds :P
Undeadflayme 3 weeks ago
I love it when he says 'bit like that'
AllofVideos 3 weeks ago
even with gate it's pushing me out about 5pistons up squeezing me up to the glass. Any tips?
ckreature420 3 weeks ago in playlist Favorite videos
Eh, doesn't work anymore. Not even that 1.1 "fix" works.
AngstycAT77 3 weeks ago
can you show up the multiplayer friendly design?(:
OutcastAngelV 3 weeks ago in playlist More videos from CNBMinecraft
i wish this would work on multiplayer for me
OutcastAngelV 3 weeks ago in playlist More videos from CNBMinecraft
It's pushing me out when i try and go up :'(
LowVids 3 weeks ago
Im trying to make one of these that is 53 blocks high. and because of the height, the green and red wires dont work. please help.
BlakDethUponU 3 weeks ago
So what redstone do I need to change if a lift piston is left pushed out and does not retract when the down button is pressed? I have 2random regular pistons that do not retract and ruins the whole system... I'm on 1.1
ckreature420 3 weeks ago in playlist Favorite videos
1.1 FIX HERE! /watch?v=KYZhXn3q-a8
Or just check my channel for the fix :D
Please thumbs up to help others :)
TheEfthyy 3 weeks ago 30
@TheEfthyy I did the 1.1 fix but i still have a few random pistons that do not retract on the way down. any redstone tips for that? not too experienced with it yet and the wiring looks fine when I go back and check.
ckreature420 3 weeks ago in playlist Favorite videos
@ckreature420 well if you followed his design exactly and then do my fix at the end it will work. so you have either placed some redstone wrong OR if you have a redstone creation directly next to it then it could be affecting the circuit (very unlikely but i dont know what your setup is). I would suggest looking at the second last repeater i placed in the video, have a look at that one on each level and make sure they are all repeaters and have no delay.
TheEfthyy 3 weeks ago
@TheEfthyy 1.1 fix? This works just fine for me in 1.1
iNordli18 6 days ago
@iNordli18 good for you, if you actually watched my video you would understand the problem that "some" people have been having.
TheEfthyy 6 days ago
ok i figured it out for 12 high , but my elevator goes uo way to fast , how can i slow it down
CarmineGames 3 weeks ago
you only show how to do it 9 up , any other height and the green/red circuit is defferent and i dont know what to do , please show how to do it if the blocks were reversed for those 2 circuits
CarmineGames 3 weeks ago
@MinecraftPandas you have to cover the display of the pistons
gamefraud666 3 weeks ago
i did everything, and it works, but when i try to actually go up it just pushes me out
MinecraftPandas 3 weeks ago
@TheBIRDIEGaming Yes, it does. I just made mine go up 20 blocks.
Teniuss 4 weeks ago
Can you do this like 20 blocks high or so?
TheBIRDIEGaming 4 weeks ago
The lift doesnt wanna stay down for me
LUDERLUDERLUDER 4 weeks ago in playlist Favorite videos
none of these work for me
polcyn123 1 month ago
If i give my workd download, can someone fix it 4 me?
LiLCano24 1 month ago in playlist Redstone creations to build
@LiLCano24 It's the 1.0.0 update, You probably did everything right.
Register3d 1 month ago
jw, if only the right piston on the bottom moves, what's the left one for?
Serfy2 1 month ago 13
@Serfy2 look's
lordmj329 1 month ago in playlist More videos from CNBMinecraft
@Serfy2 You have to stand in the middle. It's for looks and a platform. Just replace with dirt or something if you dont want to waste a piston.
FalloutNewVegas4eva 4 weeks ago
@Serfy2 symmetry. its not needed
OutcastAngelV 3 weeks ago
@Serfy2 symmetricality
colbykubicz 3 weeks ago
@Serfy2 It's there just for looks
Viminaria 2 weeks ago
@Serfy2 It is for aesthetic purposes.
Youcansuckme69 2 weeks ago
@Serfy2
to not make it lobsided?
ollii007 1 week ago
@Serfy2 Symmetry
TheLedgendaryNinja 1 week ago 8
@Serfy2 Look nicer I guess...
CheezDoodlez1337 1 week ago in playlist Liked videos
@Serfy2 Probably the esthetic decoration. I bet you can place here any block you want
MrKata55 6 days ago
My top 2 woy goin after the blocks are removed help!
SinsNotSorrows 1 month ago
can you try to fix it so that the last piston does not extend? i know that there are some ways to fix it, but it goes out of the 6x7 boundaries.
salleo248 1 month ago
MWAHAHAHA!
thingyguy1 1 month ago
Now...
Do it in 60 seconds.
thingyguy1 1 month ago
Wow, i built the entire thing in my multiplayer server, then watched the very end of the video and understood why i was so freaking frustrated...
TwistaaGaming 1 month ago
now i keep on getting stuck in the pistons
Hihellobyeoh 1 month ago
@Hihellobyeoh when i go up
Hihellobyeoh 1 month ago
i figured out my problem i was doing it wrong ( i am trying to build this in a redpower 2 world mod's volcano and when it gets night time in the game it gets super dark in the volcano)
Hihellobyeoh 1 month ago
Comment removed
Hihellobyeoh 1 month ago
Comment removed
Hihellobyeoh 1 month ago
it doesnt work for me at 6:22
xXcrazybhoyXx 1 month ago
i keep getting pushed out whenever i try to go up
any fix?
LazyArmyToy 1 month ago
@LazyArmyToy stand right between the two bottom pistons ;)
HectorFaelisy 1 month ago
@LazyArmyToy did you use a fence gate? You could use trap doors instead of the fence gate at 1.1
ThoreW95 1 month ago
how do you do multiple floors?
LazyArmyToy 1 month ago
*gets wireless redstone* Ten. Seconds. Flat.
nintendent 1 month ago in playlist minecraft redstone turtorials
At about 13:00-14:34 i got lost because for some reason the right side pistons of the elevator went up and went down, but the left side is stuck pushed out, and I don't quite know why. Please help.
rarelyknow 1 month ago
60 seconds? lol jk
XxGhOsT935xX 1 month ago
Doesn't work in Minecraft 1.1
shaked4ziv 1 month ago
@shaked4ziv It looks like 1.1 made it so that the first piston pushed out of the wall is - at least on Multiplayer servers - powered, which activates the piston underneath it (which eas just purely for decoration originally). Replace that piston with another block, and it should work as normal.
Dragei 1 month ago
how do you make it bigger
MinErzO 1 month ago
Also if you think this design still works could you come on to our server and take a look at it?
ICEWOLFJMAN 1 month ago
Can you update this design? No longer works on a server.
ICEWOLFJMAN 1 month ago
In 1.1 i keep getting pushed out no matter what i do
dac0leh 1 month ago
Is there a way to ascend (go up) slower? its so fast it keeps kicking me for "hacking" saying im moving to fast lol. I followed these perfectly and it works (on descending at least) but i cant ascend since its to fast. :P Would really like your help for this one.
TheDennyBros 1 month ago
@TheDennyBros Since he hasn't replied yet, I'll try and help. try adding one ( or more if needed ) repeaters to your circuit to add delay, and even further the effect more by ticking up those repeaters. Not sure if this would work and I'm a redstone novice but it's an idea.
Cheers.
pane36 1 month ago
@pane36 OK i figured out adding and extra repeater behind the repeater that is directly behind the sticky pistons on the right side >4x2< on the blue circuit and just adding extra wool to the end so it looks like the left side with that extra piece on it slowed it down a bit.
TheDennyBros 1 month ago
@pane36 but im still having one trouble which i thought was because of the speed, idk still but i keep ending up being pushed off and into the blocks infront of me then i get stuck. iv tried many different wall combos and stop this but nothing is working.. i dont know why its being so hard on me for
TheDennyBros 1 month ago
@TheDennyBros just place doors facing inward in front of you. That's what I did.
ibreathwaterpolo 1 month ago
@ibreathwaterpolo Nope, didnt work for me :/. its cool now tho, i just scrapped it and am buildy a simple up 1 and then using my own design for a down one.
TheDennyBros 1 month ago
i really like the way you make its with wool and small steps, GOOD JOB
lukas0070 1 month ago
To fix activation problem. Use glows tone on the top repeater wall
BoBtHePeNnY1 1 month ago
wow your awesome!
MinecraftBRO12 1 month ago
how do you place blocks so far away like in 1:39 ?
ManOfTheAQW 1 month ago
@ManOfTheAQW Single player commands
BluRViSionHDD 1 month ago
Keep gettin stuck :@
Guusjuhh0504 1 month ago
It pushes me out :(?
cuztic 1 month ago
Hewro, does this still work on 1.1?
Jawshuh 1 month ago
Smartest minecraft creation evver!
/watch?v=3ojfoxK0VjM
alexveldin 1 month ago
I wanna learn to make a computer pkease
jkulesha151 1 month ago
nvm. how did the power get turned on at 18:17?
DCNOS18 1 month ago
wait wtf at 10:27 is the structure 3 blocks high off the ground?
DCNOS18 1 month ago
Ok so i fixed the infinite loop problem but now I'm getting f*'d around by the ascension, it pretty much goes up faster than me and I get stuck on the third or fourth piston going up and get crushed and die :(
ThyWoWMasta 1 month ago
wait so all the colors u use i have to use exactly?
DCNOS18 1 month ago
@DCNOS18 No, Redstone goes through any solid block the same, He's using the colors as indicators so you can follow the circut paths
KDMProductions1 1 month ago
@KDMProductions1 ok thanks i got scared for a second!
DCNOS18 1 month ago
If you want to put people in jail, let's look at the polit ****SHRRRRRRR**** OH MY FUCKING GOD MY EARS!
I hate ads, but love them at the same time for making youtube free.
Sm0kaCola 1 month ago
i meant green > pink > blue, erh. The elevator pistons retract with the green wool but then just pop out again instantly, every time this happens I have to remove all the green wool and replace it. (Mind you my elevator is from bedrock to sea level) but then after trying to go down again the pink circuit makes an infinite power loop and I cant go down.
ThyWoWMasta 1 month ago
Gahh, the green circuit is somehow giving unlimited power in 1.0.0, everything else is fine but just it dosent descend :(
ThyWoWMasta 1 month ago
Right, I'm having a problem with the green circuit. I'm not great with redstone, but I need a way for the top repeater to face the opposite direction. What happened was that I exceeded my maximum allotted space, so I ended up with a repeater on the floor where it shouldn't be, which is activating redstone it shouldn't. I need help :c
McMaster94 1 month ago
Ekkk ive done something wrong if i post a video would anyone care to take a look??????
MrMinecraftDevil 1 month ago in playlist More videos from CNBMinecraft
Thumbs up if you used blue wool =)
Enemy99ify 1 month ago
everyone should watch this with closed captions its so funny XD
MissionSharps102 1 month ago
well it was a Royal mindfuck and a half, but it earned you a like and a new subscriber! haha nice work!
dtayl120 1 month ago
In 1.1 The top normal piston activates when it shouldn't
MrJonim1 1 month ago
@MrJonim1 I had same problem. Friend told me it was because the power was going through my stone block. I guess certain blocks are conductive. I put glass in instead on the side of that piston and it isnt activated anymore.
72Brundlefly 1 month ago
I really wish someone would make a real elevator room that you get into and the room moves u to the desired floor you want. Not one that just shoots you up to the top of the world. Id like to make a skyscraper with many floors that they elevator can stop at.
gatekeepir 1 month ago
@gatekeepir your prayers will be awnsered with the zeppelin mod!
MEumbridge 1 month ago
theres something weird about the way he says a bit like that which makes me wanna watch o.o
kessonthecow 1 month ago
Great tutorial as usual. I just wish I'd listened to the bit at the end about it not being great for multiplayer before spending a few hours building the thing. Oh well lesson learned
agenttelstar 1 month ago
Is it possible to stack this. For like 4 floors?
thecrafter271 1 month ago
How to reach blocks longer?
xXVortosXx 1 month ago
why do we need to use sand blocks? doens't stone work?
MageDb0w 1 month ago
What is your server IP?
PrimeKnight0 1 month ago
@PrimeKnight0 hes on single player
iRRRxRaVeRzZ 1 month ago
@PrimeKnight0 he uses his mp server for tests :L
iRRRxRaVeRzZ 1 month ago
....amazing!
TheDeadlyloser 2 months ago
press space twice in a short time and you could fly
while you're in the air,press space to go up and shift to go down
and also w,a,s,d to go front,left,back,right
kevin326520 2 months ago
how did u fly i keep trying it in creative but i cant
VideoFreak8980 2 months ago
@VideoFreak8980 double click space bar in creative :D
iRRRxRaVeRzZ 1 month ago
I have a fix that works on 1.0.0. Its uploaded on my channel. Inset my fix at approx 17:45 in this vid. Like for everyone to fix
Ritsuzen4Life 2 months ago 38
@Ritsuzen4Life thanks bro
DCNOS18 1 month ago
This can work if you did as I did when I found out that this didnt work, though the buttons in 2nd floor is not at the same places as in 1st floor. But definetly the best elevator out there.
If 50 thumbs up I can make a video on how to change it from this to something that will work.
Xetosphere 2 months ago
it reached the wrong piston at the top does not go in when everyone else goes up. why it happens so?
TNTpyros 2 months ago
does it work in multiplayer?
TheAdventureSquirrel 2 months ago