Bob Long Vice weekly maintenance guide

[Humonic]

Terrible vid. Why would he put lurker over 55........ Lol. Fucking kids

[nicogaeta]

guessing from your extensive experience in maintaining this gun yourr mom probly bought that for you. but i do like the white macroline i might get that for my vice

[cdlcrusader1]

he doesnt use dow 55

yet their is dow 55 in lurker lube

F A I L

[baconator490]

@cdlcrusader1 I believe lurker lube is slicker then dow 55 but also swells the orings so its better.

[125MrSam]

loctite really?????

[funnyguy5020]

why do u drop stuff

[rubiksfan2000]

where can i get dow 55?

[stewey956]

The black stuff is actually graphite from the lube.

[azminisk8r]

@stewey956 no graphite in paintball lube. its oring remnants/junk.

[invertmini303]

lock tight on a ram cap is really not a smart move

you are going to strip it

[azminisk8r]

youd have a valid point if

A) it wasnt blue, temporary, loctite

B) a 3/16 socket

ive NEVER seen... seen ONE stripped 3/16 socket hole, and that was done with the wrong sized wrench. the loctite is very weak, just strong enough to hold against vibration. its red and green that you have to worry about stripping smaller sockets with.

[baconator490]

@azminisk8r there is still no point of putting even blue loctite on the ram cap it should already have an airtight seal without it.

[azminisk8r]

@baconator490 loctite is an anti vibration thread coating, not airtight seal(thats an accidental purpose) and the backcap vibrates plenty with that huge rammer cycling.

[baconator490]

@azminisk8r whatever i guess its not my problem if you destroy your ram cap threads

[azminisk8r]

@baconator490 yeeeah, out of the probably 200000 times i took that cap off, no wear. n from your profile it looks like you like to pick fights on youtube to feel cool. so yes, in your fantasy world, youre right, putting liquid on threads will disentigrate them until they spontaneously explode, just like in the movies -_-

[xkornxjr]

@baconator490 I didn't think it needed loctite either but after using my vice which seems like almost 2 years now its started coming loose giving me problems if I don't use blue loctite

[baconator490]

@xkornxjr thats when you call BL and get a new backcap because the threads are getting a little worn.

[azminisk8r]

that would be a real nice flame. ooh... if only i hadnt bought this gun mahself faggot. its not that hard for 16 yr olds to make money.

[donzinms]

sorry dude that was my friend. ill remove it. sweet gun nd vid!

[EndangeredSoup]

Why would you need to loctite your ram cap?

[jamalbpb]

lol "slippery hands."

[StarShitEnterprise]

What kinda of lock tight is that?

[MurphManPB]

blue loctite

[azminisk8r]

gratz. i can say that im a tech for biohazard, bht, amh, and a few other teams if i want to. being a tech means squat lol. only time being a tech means something is when you are a tech for the company, not a team.

[wackyguns]

Dude you obviously don't know shit but what somebody showed you so don't go talking shit when obviously you are giving people answers that you have no idea what the hell your talking about

[azminisk8r]

not really. i know how the gun works, why it works how it works, how it breaks down, and how to fix it when it does. thats what a tech does. just cuz im not an old fart doesnt mean i know less than the old fart you praise. now please, gtfo with your uselessness.

[wackyguns]

if you want a real tech to show you about the vice ask mike with Tech Pb

[azminisk8r]

youre funny. mike knows as much as whats in the manual. if that. take your techpb fan shit elsewhere.

[tdogg9466]

Hi im looking for a bob long vice new for sale so if u wan2 trade or sale send me a message thanks

[konkov123]

i shot my vice and it worked perfect, then later on for some reason the bolt does not go forward really fast so the ball just falls out the end. Where is the velocity adjust? Or what do i need to do to get it to fire at normal speed?

[paralizer11]

waiitttttttt

Azminisk8r off pbaz? if u are dide thanks for the vid it helped

[azminisk8r]

yeah.

[coolasice888]

hey how many cases you have to fire through the vice to brake it in? is it normal for the vice to use a lot of air on a first time shooting it?

[gepridecmc]

uhm about 10 cases

im not sure but i have like 5 through my vice and its shooting awesome efficiency like maybe over half a case off a full 68/4500

[coolasice888]

wow i guess im gonna have to go trigger happy on this thing. so far i've only shot a case over the weekend and i've lost count how many times i went up to fill up my tank(68/4500). Its a good thing the air is free.

[gepridecmc]

hmmm i got mine used so idk how much you will need to shoot to see some increase of efficiency.

if you dont start to see improvements by sayy....4 or 5 cases then i would call BL and ask

[wackyguns]

you need to adjust it if thats the case i got 1400 shots out of a hot fill 68/4500 tank when i got mine you need to adjust the lpr and reg properly or you will not get the best officiency

[coolasice888]

im actually starting to see good result on my vice in terms of air efficiency. i shot about 3 cases through it so far.

[graphitesoldier]

for the vice do they give you loob and extra o rings in the packaging

[ViEtPballer]

only some o-rings

[benzzyo5]

dude you should never use lock tight on your marker

[azminisk8r]

sure you should. why wouldnt you?

[paintballlpplayer45]

just dont use non removable. i dont have a problem with using it

[Supernerd98]

dude lock tight is perfectly fine to use on your gun, just make sure that it is blue lock tight NOT RED LOCK TIGHT!!! that will stay on the gun, blue wont

[5444110]

will this work on the protege

[macangel1]

yep, they are really similar guns.

[smartparts360]

nice vid especially cause bob long manuals are really crappy but mike assured that would change

[captainremo]

anyone have trouble with Fps? My gun was firing like 120,200,160,240,190 and so-on. I was using reballs and im not sure if that was it but i think it might be my lpr screw backing out...what do you think?

[Sikdawg3]

there just might be something wrong with the lpr pressure.

[ramones24mania1]

hey do you think hater sauce would mess up me vice

[deegan463]

don't use it on the ram. on the reg's its fine.

[boroughpaint]

What kind of lube do you use, I couldnt understand you?

[M40kc]

Well he wont answer you so he is useing lurker lube.

Dunno if I spelled it right.

[minidianke]

NICE

[KickMyJuice]

not using dow55 is completely contradicting the conditions and tests that every timmy ever made has gone through. would it be so terrible to spend the 20 bucks and get an 8 oz jar of dow55 for your timmy?

[azminisk8r]

8 oz? are we trying to open up a fucking factory?

55 sucks. makes the orings wear out faster. less consistent. etc. higher dwell/pressure. tests have been conducted that proves that lurker lube works better and performs better, but the tests were ignored and shunned.

so as long as you dont get a vice with shitty tolerances(bobs cheap, so the tolerances on his guns are pretty damn big) then you can use regular lube. the 55 covers up the tolerance mistakes.

[KickMyJuice]

link to this report?

and how can you comment on mikes swearing when you can swear 3 times in one response to someone?

also wondering if youve ever talked to a BL tech or BLAST about anything...

[azminisk8r]

long gone. done over a year ago. but chemically as well, lurker wins.

swearing 3x= not excessive.

yes. they all said to use 55. too bd.

[unitedgray]

Dow 55 has been recommended for use in EVERY Timmy ever made. I am 100% sure that Bob knows far more than you do about paintball marker operation (especially about his own markers). There is also no reason to lube the metal on the rammer, the o-rings are the only part that contact the inside of the marker. If you put a dab of lube on the end of the ram it will be gone after the first shot. And there is no need to loctite the ram cap, it just needs to be snug.

[azminisk8r]

yes it has, because of bobs shitty tolerances on every timmy ever made...

lube on the metal helps as well. holds it there, and the air going by will occasionally move it over the oring.

loctite>metal to metal bonding.

[Filipin0Dude]

@KickMyJuice damn straight! bob long himself said use dow 55, forget what u read online dow 55 ftw

[eatsomedog]

Great info thank you.....

[homeedogg]

its UN MOMENTO not One Monemto !!!! hhaah but wwhy do u use locktite does the backcap come unscrewed every 10th shot?

[bloodreignn]

can u use a cure bolt on a vice

[HeyImChinese]

haha no u can only use the cure or cure2 on the planet eclipse guns. violent however makes a bolt for the vice that looks almost identical to the cure2 that fits the vice. but i hear the pillow is well good enough

[deegan463]

you can't get much better than the stock pillow bolt, quite honestly.

[deegan463]

why would u put loctite on the ram cap? just tighten it down and ur good to go.

[azminisk8r]

cuz the vibrations from the gun firing can make it come loose.

[fackthoseguys]

ya the lock tight is great. without it my reg comes loose sometimes.

[azminisk8r]

uhm... yeah, wtf are you talking about. backcap isnt supposed to move. and yes its supposed to be tight, and yes you can use loctite on it.

[bmal18]

sorry never mind as soon as lock tight and paintball parts came up i stoped and posted lol

[bmal18]

are you crazy, the back cap isint even saposto be that tight you should know this from owning an etek and to use lock tight on it your asking for osmething bad to happen

[ttjjyy]

its jizz in a container..... lol

[matt13E7]

hey wat kinda lube is that?

i want to buy some

[KMAYER1221]

It's Lurker Lube.

Stuff is amazing.

[drollin14]

i was wonderin what bob reccomends on the bolt...dow 55 or just a random lube like say extreme rage, stuff like that. i was kinda thinkin about usin lurker btw cuz i personally hate 55

[papajoewil10]

tri flow

[deegan463]

Bob recommends tri-flow on the bolt.

I personally run mine dry and it works fine, and doesn't clog the eyes or anything obviously. Lots of people run Timmy bolts dry. Just clean them down after every day of play, that's all you need.

[XxProdigyPBxX]

Does the paint strip off easily on the vice.... I mean do you have to be very careful when you are handling the parts so the paint doesnt scratch off

[azminisk8r]

paint?

[XxProdigyPBxX]

the Paint job on the gun

[sharkhunter199]

paintball guns are annodized, not painted, u would need something sharp like a screw driver to scratch it

[paintball4life112999]

y do u keep droping stuff..lol

[acitytosee06]

very nice!

good job sir

[paintball987456321]

at least u know the lock tight works

[azminisk8r]

when it doesnt clog that is lol.

[sumblocka]

dude how many guns do have

[squirlybmx]

He has 2. The mini and the vice. He traded the etek2 for the vice.

[moneyindabag]

actually he didnt trade the etek2 for the vice, I bought it... nice try though, who would trade a vice, for an etek2? downgrade haha