Added: 9 months ago
From: TheOldScientist
Views: 68,697
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (95)

Sign In or Sign Up now to post a comment!
  • Tesla Patent #567,818 (Keep an eye on the PRESSURE) BE CAREFUL!

  • @MX6Maximus It is Tesla's patent on a condenser or capacitor which he improved by submerging it in oil. That is today standard for high voltage capacitors. The pressure comes from the current delivery and storage. The one I use are for this purpose. The large ceramic ones are good to but they have a lot of leakage, no good for storing that energy.

  • @TheOldScientist Hi, is the flickering due to energy loss or when energy is pulled through the coil, is there a pulse effect going on as it pulls in, amplifies and discharges out. Oh and is there any effect regarding the coil trying to pull in more energy than its given, like an overloaded circuit, or am i totally off the mark here? Thanks

  • @ProjectsBlack Hello, It is the inconsistency of the series spark gap and the charging capacitor. In this example it is worse. The switching voltage fluctuates. You have no clean energy flow. Then only option is to change that with a synchrony rotary spark gap, which I build at the moment. The discharge is not controlled by the gap but by the position of the rotating electrodes in sync with the voltage amplitude. Check Terry Blake and Richie Burnett on my website under Tutorial.

  • @TheOldScientist Hi and thanks, ive not really looked into Tesla technology, i wasnt into electronics, but radiant energy capture sounds like a rather good concept if one can utilise it, even if its for simply trickle charging batteries or taking waste radiant energy from other appliances. Maybe coils rigged up to metal plates outside the house in sunlight, could create an electron based current coiled up and sent out?

  • @TheOldScientist I will check out your website.

  • VARIATION of the RESONANCE adapted to ionatized espace is your example i believe

    But dont you feel that this it just such a small piece of what you could really harness. Work on the possibility to harness this to nature since ground to higher area are excessively worlwide potential difference ie 360 KVA upon 60 miles once announced TESLA . More explicits in US patent 685 957 dated 1901

  • @utube4phil Hello, That is correct. The first hurtle is to get permission to build something at least 30 meter high. There are patents existing for that. Electrical potential to ground is over 600 volt and very high current. Watch my other videos of this series. The gain will get higher and higher.

  • @TheOldScientist I think the Russians have already scaled up Tesla's original. Perhaps you've already seen this, but just in case its interesting for you youtube.com/watch?v=5Td--HItuo­I

  • @MrFlathunter Hello, Yes that is very old. Only pictures exist. A bit strange to have a cluster of them close to each other. One main power source linked to the secondary and they are all magnifiers but with different frequencies. Like an accord on a piano. Based on the coil length I assume it would be below 50 KHZ. There is a test area in America which uses two large Tesla coil to test aircraft's in a lightning scenario. More a test facility for safety.

  • The only thing that we for sure dont know where it comes from here is the music !!!

    Nice track. Could you tell us the artist ? About u its NOW very clear since MANKIND will learn better and better what is RESONANCE that TESLA open the way, that amazing changes will occur, much further that anyone could think about it

  • @utube4phil Hello, The source of the music is from the WingMakers. The official website is listed under esoteric on my website. All songs can be bought. There is beautiful story to the songs.

  • Submerge the air cap in mineral oil. You don't want any air between the fins.

  • @MX6Maximus I see where you come from. I did not expect to get so much electric potential and was surprised. No problem it simply sparks. Lost energy.

  • @MX6Maximus Now I see what you mean. That is a good idea. It would save me to buy a vacuum capacitor which is very expensive. I give it a try and might show it in a video.

  • @TheOldScientist Tesla Patent # 685,957 uses that condenser, one of the key components the "free energy from ether" folks miss. The other is the polished & insulated plate for the antenna. Have fun with it.

  • did you build the receiver? if not were did you get it?

  • @josh22784lori30 Yes, a simple aluminium foil from the supermarket. Two small tubes of aluminium and the other receiver in later video is using some wood sticks for flowers.

    The base as a piece of timber. You achieve better results when the foil is insulated in a dielectric like plastic. Watch the following videos.

  • were did you get the

  • @yeaalrightiamawakeIf What do you expect to see? Why do you watch it?

  • From Ebay and surplus stores around the globe. Mainly America

  • Where do you get your supplies?!?

  • @4240ed If you need specific kit, have a look at my website. I got sources under tutorial for you. Other tell what you need and I tell you where you get it.

  • @TheOldScientist Cool! thnx! Consider this page subbed! :)

  • Please understand I meant no disrespect to you. I am pointing out that there are a lot of folks who use Tesla's name for High Voltage experiments. Tesla was not experimenting he did that in his head. Not too many can accomplish what he did. Just that I feel its a discredit to him when we use designs that are not truly his or those who use his name to gain attention to experiments. I myself have studied his work. I do not claim to know it. (Remember this is an observation and not an accusation.)

  • I have yet to see a true Tesla design. Every video I have seen on YouTube has been a good copy but not a true Tesla design. Tesla did not wear gloves nor did he have any trouble standing/sitting near his inventions. It took him years to figure out how to do what he did. Much of what is written is from a regular engineering observation and they do not fully understand his work.

  • @Hiv0ltage Well, there are true Tesla coil designs out there. However at first we need to identify, what is a true Tesla coil? The components is not the part of it, It is always the same. HV power supply, capacitor bank, spark gap, primary and secondary air coils. It is how you drive it. Most coils are AC driven. That is not powerful and also dangerous. The 50/60 HZ get through the primary into secondary and is part of the frequency in the spark. That hurts.

  • @Hiv0ltage You have to connect the secondary to the ground and have to drive the primary with pulsed DC. By doing so you get a much more powerful spark or energy release an also you separate the mains frequency from the secondary and the current into the ground. What is left is pure potential without current. Well you don't feel it any more but it is still dangerous. It burns under your skin into the bones. You notice that many days later. Tesla know that and did abandon sparking altogether.

  • @Hiv0ltage So, just to be on the save side, because I have been hit many times, through 70 cm wood. I wear gloves. Only fools touch the spark direct.

  • @Hiv0ltage i have read that even thou you may not be feeling the shock. it can still cause nerve dam

  • I have yet to see a true Tesla design. Every video I have seen on YouTube has been a good copy but not a true Tesla design. Tesla did not wear gloves nor did he have any trouble standing/sitting near his inventions. It took him years to figure out how to do what he did. Much of what is written is from a regular engineering observation and they do not fully understand his work.

  • that's a florescent bulb, Neon is what they use for "open" signs and the like, you know those lit up colorful glass signs?

  • @sylver369 Actually, it contains argon, mercury vapor, neon or krypton but not pure neon. They are only in use for so called NEON Signs not for fluorescence lamps. It would be too expensive and the UV radiation would not be high enough to illuminate the phosphorus salt on the inside of the tube wall.

  • Question is. can radiant energy harvesting make "free" energy devices...?

  • @superdiza Hello, "Free energy" is a misconception. We can talk about alternative energy systems. Such systems which are not established by the industry. Radiant energy is the reason we exist on this planet. Our biggest radiant energy delivery system for this planet is the sun. That was the main concept Tesla was talking about. You can have radiant systems which are artificial created.

  • @superdiza You do that by exciting the environment out of equilibrium and capitalize on the energy potential when it tries to reach the neutral state. Second law of thermodynamics. From order to chaos. An irreversible physical or chemical change is a change that will not spontaneously reverse itself without some change in the surrounding conditions. Irreversible changes have a high degree of probability. That is what we aim for by trapping into it to gain an energy potential.

  • Comment removed

  • @superdiza Yes, You got the instruction to build it.

  • @TheOldScientist in this video? how much does it make and for how long? has this been repeated?

  • @superdiza No, please watch all radiant movies. This is the first one. The current last one with the Bifilar coil is the most promising. There is much more optimisation possible. But I do not want to go all the miles to the finish line. I want that you are participating and continue where I left it. I did show that high voltage is captured and sparks are created. There are well known circuits based on Ohms law to build a voltage divider existing. It is simple mainstream technology.

  • @TheOldScientist optimization is almost irrelevant.

    somehow it seems, and i've been through more than 40 such videos, curiously non has finalized any so called working device.

    half a car is worth far far less than a working car.

    SO.

    If it is so SIMPLE, why not go the extra quarter mile and finish this,..make a truly WORKING free energy device. you seem like the right person, in the right place, with the right knowledge and access to the right tools.

    this is your mission.

    you're the man.

  • Check out the JOULE THIEF Vids? It may have some SPARK Of inspiration for you?

  • @HLANGEL100 Thanks for the information. I am very familiar with the Joule Thief. A high efficient resonant system, however you squeeze out of the system what is possible you do not extract energy from the environment. Your batteries last very long. I am more interested in larger scale systems with high power / voltage. Scale it up to one KW then I have a look.

  • First off, this is not "free energy" as some poster seem to think. This has nothing to do with free energy. This power is coming from the power being run through the Tesla coil. Second, it appears that there is a wire running to the Tesla like a common ground. My radiant setup has no wires whatsoever going from transmitter to receiver. Tesla often used a ground wire for his setup but that is rather immaterial and this can be done with a simple spark gap transmitter. Just saying.

  • @thorargent Correct, there is no free Energy. I was always saying that. Would you care to watch the consecutive videos of radiant Energy. They tell a story. And also the first video of the Bi-Polar Tesla Coil, which I build specific for all my future experiments in mind. In this building I had no ground in the loft, so had to work without. I also did not link the primary to the secondary. One important aspect is not fulfilled for the Tesla Coil.

  • @thorargent It is driven via AC. That does not give you the power you would draw from unidirectional DC pulses. However that was in this example not so important because I was investigating ways to tap into the field. In my later videos you will see how well it works. Even with AC you still have an RLC network which rings. With DC pulses and the correct spark gap it will extract more power.

  • Thanks for the speedy reply I must have missed the comment. Wouldn't using an really good earth ground solve the problem of current? As the earth has lots of current?

  • What kind of efficiency are you getting now?

  • @acrophobia123 Your question is answered below to Rantimr

  • There are so many ignorant people that believe free energy is impossible, its sad. Tesla knew the Universe is filled with Energy (Vibration), its everywhere and its only a matter of finding ways to access it. I hope one day soon the world can become more enlightened. Peace to all.

  • @JELEL6688 There really is a lot of energy available to us. I'm reminded of this every time I get shocked, or see an unused section of power-lines grounded so they don't kill the first worker that will be tasked with connecting them up to the grid. The energy is everywhere, and I believe there's much more available than what can possibly be extracted, or pumped from the aether. Our planet a giant capacitor that often shorts during storms.

  • @JELEL6688 Free energy exists - the wind - windmills, water - waterwheel - its there - why do you say that some people don't believe in that?

  • @Spandex08 Free energy as discussed in relation to Tesla is something completely different. You are describing physical energy. Free energy is the "source field", the "source of all that is", the divine source of the universe.

    That's why it's limitless. It doesn't get spent. It's what the universe is made from at the sub-atomic scale.

  • @KiopGenJin Don't know what you are trying to say - by physical energy - anyway its a known fact that energy doesn't disappear - it just goes from one form to another so for ex. from wind to mechanical (the windmill rotates) generating electricity - from electricity to your monitor screen etc.

    From wood to charcoal and gases by burning. Its a law of conservation of energy. The universe is a big recycling machine

  • @JELEL6688 @JELEL6688 I am all for free energy.. but if it is al around us and if you already understand electricity and tesla work , why don't you build a free energy generator and present it to the world... even if it is only a proof of concept. I look forward to see your work on this. If it is not that simple that means that WE ARE NOT EVEN CLOSE TO UNDERSTAND IT, which makes it useless now... for us.. isn't it?

  • You need to think in 3d for all pick-ups. The coil, the capacitor, try them in all six orientations to the source.

  • @SlackerSlayer True, I noticed a difference by aligning the coils. Will have to do more tests on a larger scale. It might be because of the orientation of the dielectric field of the Tesla Coil. I will test it with my Wireless Power transmitter in a later video.

  • .....and then JP morgan turned against nikola tesla.....

  • @WrongBirthday Correct. Nicola Tesla was not smart in business terms and security like signal encryption was not available at his time. We can commercialize that today with a specific receiver like your power meter in your house. Everybody happy.

  • @TheOldScientist u should upload a simple schematics for people to build easy to build and safe to use cause that's it's what is need it .. this is actual power to the people

  • @cris23dumi Hello, instructions and tutorials are all on my website. Link is on my profile or lookup theoldscientist in google

  • @WrongBirthday JP morgan saw endless supply of electric bills generating money each month and money equals power over people. Radiant (Zero Point) energy is real. Keeping pushing the boundaries guys. We have a new generation that will no longer put up with greed, corruption, and enslavement to power hungry cronies. My blessings to you all.

  • Is this free energy?

  • What percent efficient is this, or is it now?

  • @Rantimr This video shows that you can harness energy. However that is not power you can use to run a motor because current is lacking. In my follow up videos I increase the efficiency by exploring various systems. The latest video with the Bifilar spiral coil need your attention. This one is easily capable to have a COP of 10. Input power 80 watt output power 1000 watt on resistive load. I explain that you need to transform it down to mains voltage in order to use it for our appliances.

  • ..this is why he is not famous because if this became common practise governments would not be able to meter and collect a tax on energy.

  • What is the music playing?

  • @ElectricSparq Hello that is AA Champer 21 from the Wingmakers. You find download for the songs from their website. I have a link on my website under esoteric.

  • @TheOldScientist Thomas I don't know if i did something wrong or you just are really busy, but do you think it's possible for me to skype with you some time? i have a few important questions regarding your expertise and work

    It would really mean a great deal to me for some of your time, because you are the only person i feel strongly about in terms of being on the right track, regardless if you talk to me or not i have a profound respect for you

    your friend-subscriber

    Nick E

  • For a good article discussing this idea here is a link:

    nuenergy.org/alt/radiant_energ­y_diatribe.htm

  • @AdlerMow Can  you mail me via my contact form on my website please.

  • Put the triple "w" in the link below. Stupid youtube posting rules!

  • Im making confusion here, sorry. The idea is to harvest static using an kite or ballon "antenna", a simple long isolated wire that will be charged through electrostatic induction when the wind blows by. Kind like franklin's kite, but better. Something like this: nuenergy.org/images/jpg/basic_­tesla_conversion_circuit.jpg. For the loop antenna, you put it close to or directly under the power lines. And then, make it resonant using a variable cap.

  • @AdlerMow Hello, you are right but if you read the patent careful Tesla suggest that you can harvest any kind of radiation. He was actually talking about particles from the sun. I alternated his patent and using the dielectric field of a Tesla coil to prove the concept. Try to get 100 meter of wire to a higher altitude. Use a sheet rather then a wire. The surface will capture more waves from all frequencies. My other videos tune to the frequency and gather more energy. Eric Dollard explains.

  • @TheOldScientist great vids but after i see it lightsup when u did no connection but u said there is displacement due to ur hand in the gloves which increase the lighting, now i see there is some sort of energy around us that we can obtain. I wish i can meet wif you to ask more about this.

  • @5sweatingpalm AS a starting point I would suggest to read some information from Nicola Tesla. I have his inventions on my website under books. Link is on my channel page.

  • @AdlerMow . You don't need to buy the patents of Tesla. I have them free of charge for you on my website. Don Smith has nothing working. Simply wrong principles.

  • Sorry if i sent identical comments again and again. Its this stupid bug that says "Error, Try Again".

  • If i use a large square loop antenna, of say, 2.5 meters/side, and make it ressonant with a variable air cap., can i lower the voltage through a tv flyback and capture static from the air, or at least, tap a power line throght induction?

  • @AdlerMow Hello, yes, but there are two different electrical energy forms you are talking about. First, static electricity is captured in dielectric materials like plastic or glass and not electromagnetic in nature, no frequency. Will not work with flyback. To change the voltage you need frequency and electromagnetism in order to transform it. To harness energy from the air is via a long aerial to a fast bridge rectifier to capacitors. It takes long to store energy. Tell me what you are after?

  • @AdlerMow Mutual inductance is required to capture the magnetic field of a power line. Because you are so far away with you antenna there is almost no energy left to capture. Another thing is that the frequency is low but voltage is hight. Low frequency because the iron core can not switch fast enough the magnetic field. It creates heat and therefore a loss of the EMF. High voltage overcomes line resistance. The only way is to store the energy and create AC from DC to a transformer via IGBT's.

  • Can someone please recommend a good community based Tesla site where we can learn more about this technology?

  • @ozcabal Hello, there a Tesla sites simple to find search for Tesla technologies. I have collected some rare information about Tesla. Please have a look at my website. I have all the patents and a recorded interview from Tesla's assistant. Also, look at Eric Dollard's documentations. I have many publications from him I will add to the website. You will find Borderland as a good source for information. that is how I learned all about Tesla 15 Years ago. Let me know when you have more questions.

  • Beautiful work, and amazing video. thanks for sharing, a real treat on a thurs morning!

  • You have many options. First, my Favorited source is Ebay. I buy almost 98% of what you seen in my video on Ebay. However if you see Eric Dollars video you want some vintage stuff as well. Like RF meters and Spark tubes as well as variable capacitors. I searched for military grade stuff and found a couple of sources in Europe and America. You can order it direct from them. Duty applies.

  • Jeez !!! =-)

  • Where did you get that variable capacitor?...where can I salvage one, out of what kind of device?

    Great work! Frequency is everything.

  • Just one hint: I recall that 1B22 are powerful tubes but they are also radioactive (pls check related Datasheet on the Web): some people uses and shows them but doesn't warn otrhers about the danger, so take care for safety if you use them (adequate shielding, storing etc). Anyway, yr. vid is great ! Take care ;-)

  • Well done, TheOldScientist, this is what "gives me the creeps", that is the "good 'ole Tesla H.V." ! Pls keep going on ! ;-)

  • @HorizonDelta yes, You are right, I am aware that they are radio active. They are 90 years old. I did build a case and will add some lead shielding. It contains Radium 226.

    I have four of them. The original package says when damaged throw in the middle of the ocean.,LOL

  • Excellent construction and interesting video. Is there a spark gap? I don't see how we could break symmetry or produce large amounts of displacement current without a spark gap and an earth ground or some sort of large electron sea anchor for the other half of the circuit.

    Vladimir Utkin wrote some interesting documents on the subject and you would see what I am suggesting if you read them.

    Thanks for the video. That TC is a beauty and the putted primary is just over the top.

  • @QuarkToo Hello, Yes the 1B22 is doing the job. They are from 1920 and are highly radio active. This tubes are used to power Radar systems and switch over 100 Amp. Unfortunately the Neon sign transformer need a higher brakedown voltage to create the kick. In this example I am not interested in it. No spark is create on the Tesla Coil. You have to avoid it in fact. Don smith has already used this for his system.

  • @TheOldScientist Do Smith however couple the coil direct. I do use the frequency of the dielectric field to create the energy. The new receiver I will build will exceed this performance. I had to pot the primary because it was sparking all over the place when I used it for the Biefield Brown experiment. Again no spark is allowed to be produced, that is causing a huge strain on the system and need to avoided.

  • @QuarkToo I just read the article and it is exactly what I like to achieve. You can see on the scope that I reach the first stage. My new system will hopefully reach the second stage. Spark gaps do not always increase the performance. I have a concept in mind and give it a go.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more