@CHRnCRS13 No you can't. What you might be able to do is to get a y splitter to split the audio feed so you can plug that into the mic port and then one mic into 1 side and the handheld mic in the other side. It is something you will have to test out.
so i have a shotgun and have to use the mono to stereo but with this would you need two of them. one for mic to transmitter and one for receiver to camera?
@fidelis06 I believe I answered your question in the video. There is velcro to attach the mic to the camera. If it wont fit on that, rubberband it do the camera or a pole or something.
@fidelis06 I believe I answered your question in the video. There is velcro to attach the mic to the camera. If it wont fit on that, rubberband it do the camera or a pole or something.
@videomanico13 Each mic needs to have its own receiver because they all have to be on different frequencies. Or you need a receiver that can handle multiple frequencies at one time. Your best bet is to get a good shotgun mic.
@bradsull the mount that comes with it, fits the GL2 size. The cannon I have has a smaller show, so if there is a smaller mount that can be screwed in, then yes. I am assuming some 3rd party probably makes the mount for the smaller show.
This video is awesome. Thanks for taking the time to do it. One question I have is on the handheld mic. I do a lot of interviews on red carpet events with a lot of background noise. Does that mic pick up lots of ambient sound around you or is it quiet uni directional?
@1chomps No. There is the only way to see if the batter is dead and that is by the light being off and on. If I remember correctly, they are 9V batteries, so you could test it with your tongue. As long as you don't have a condition that will throw you into shock. =o)
There is no question that the lapel microphone attenuates the high frequencies compared to the hand-held. Certainly not objectionable and in many cases desirable to have that frequency roll off. This is a great review with all the necessary info.
@mlmlivesupport Turns out that one of the batteries didnt shock me. Made sure i had the polarities on the correct side ): but the red light doesnt light up ):
@mlmlivesupport I got stung by one of the batteries. And tested it out. The box didn't light up ):, but i'm gonna get a new fresh pair of batteries tomorrow and test it out again. If not ): then i have a bad pair
@OhSnapitsJuzDin Just got NEW Batteries, and they work perfectly! I guess the battery that i had Last night had some juice, but not enough to turn on the device.
@Freakdeke88 No, just 1 or the other. I don't think a splitter would work because a splitter would be stereo but the mics are mono. The ports may be mono too. You could always try.
can you use the handheld mic and the body mic at the same time and if not, is there a way to do that?
CHRnCRS13 5 days ago
@CHRnCRS13 No you can't. What you might be able to do is to get a y splitter to split the audio feed so you can plug that into the mic port and then one mic into 1 side and the handheld mic in the other side. It is something you will have to test out.
mlmlivesupport 4 days ago
Actually what you should do is get a Y cable to split the input into two channels. Right Channel - Lav Left Channel - Shotgun.
michael1980123 1 month ago
@michael1980123 That is not a good idea because your voice would be picked up in both the lapel and the shotgun mic.
mlmlivesupport 2 weeks ago
@mlmlivesupport The talent wears a lavalier and a boom operator holds a shotgun mic in front of and over their head. That is industry standard.
michael1980123 2 weeks ago
@mlmlivesupport You can then mix the two tracks together in post.
michael1980123 2 weeks ago
Excelent review!
albertoferreravila 1 month ago
Could You give a direct link to the adapter? I didn't see it on your site... thanks.
nickJeen 2 months ago
@nickJeen Make sure you visit the right link. I just added 2 text links to the page. 1 is for the microphone and the other is for the adapter.
mlmlivesupport 2 months ago
@mlmlivesupport I think there might be something wrong with my mics, because i have this exact adapter and it does not fit.
nickJeen 2 months ago
@nickJeen It doesn't fit where? Is it possible to record what you are doing and upload it so we can see?
mlmlivesupport 2 months ago
can you give the link to the converter from mono to stereo?
sptaugner 2 months ago
@sptaugner I just added a link that will take you to my page for the mic and convertor.
mlmlivesupport 2 months ago
Very good info man, thanks just ordered 2 sets.
HelpfulComputerTech 3 months ago
@HelpfulComputerTech great! I use mine everytime I use my camcorder. I know you will like it too.
mlmlivesupport 3 months ago
@mlmlivesupport
you can hear noise in the video?
Simon12865 3 months ago
so i have a shotgun and have to use the mono to stereo but with this would you need two of them. one for mic to transmitter and one for receiver to camera?
damionnblackk 4 months ago
@damionnblackk your message went to my spam folder. You only need the convertor for the receiver. It gets plugged into the camera.
mlmlivesupport 3 months ago
What if the camera you are using doesnt have a "shoe" to mount what then? How do you then attach receiver to the camcorder?
Please advise.
fidelis06 5 months ago
@fidelis06 I believe I answered your question in the video. There is velcro to attach the mic to the camera. If it wont fit on that, rubberband it do the camera or a pole or something.
mlmlivesupport 5 months ago
@fidelis06 I believe I answered your question in the video. There is velcro to attach the mic to the camera. If it wont fit on that, rubberband it do the camera or a pole or something.
mlmlivesupport 5 months ago
We have WindCutters for those!
TheWindCutter 5 months ago
I want to use 4 wireless microphones simultaneously can the Receiver handle the 4 transmitters at a time. Does any one know?? Thanks!
videomanico13 5 months ago
I want to use 4 wireless microphones simultaneously can the Receiver handle the 4 transmitters at a time. Does any one know?? Thanks!
videomanico13 5 months ago
@videomanico13 Each mic needs to have its own receiver because they all have to be on different frequencies. Or you need a receiver that can handle multiple frequencies at one time. Your best bet is to get a good shotgun mic.
mlmlivesupport 5 months ago
I also have a canon, I ended up buying a hague adapter for it so that mics can mount onto it. Great review, the mic looks awesome.
Laurbubble 6 months ago
Thank you for this helpful review
ihath 7 months ago
Do they make one that will mount on a Canon? Specifically the XA 10?
bradsull 8 months ago
@bradsull the mount that comes with it, fits the GL2 size. The cannon I have has a smaller show, so if there is a smaller mount that can be screwed in, then yes. I am assuming some 3rd party probably makes the mount for the smaller show.
TheTjchambers 8 months ago
Great Video. Extremely clear and detailed! A pleasure watching! Thanks for helping me choose the right mic :')
TooMuchRandomness 9 months ago
This video is awesome. Thanks for taking the time to do it. One question I have is on the handheld mic. I do a lot of interviews on red carpet events with a lot of background noise. Does that mic pick up lots of ambient sound around you or is it quiet uni directional?
Thanks.
Dave
heyuguysblog 10 months ago
@heyuguysblog I need to test it out. I have only bee using the lapel mic. I have some video work coming up, so I will see maybe this week.
mlmlivesupport 10 months ago
is there any way to monitor the battery life?
1chomps 10 months ago
@1chomps No. There is the only way to see if the batter is dead and that is by the light being off and on. If I remember correctly, they are 9V batteries, so you could test it with your tongue. As long as you don't have a condition that will throw you into shock. =o)
mlmlivesupport 10 months ago
That was a really good review. Helped me make my decision. Will be ordering in a few minutes.
digitalartwerks 11 months ago
Thanks for the review. Handheld microphone was good.
MohonaTvCanada 1 year ago
There is no question that the lapel microphone attenuates the high frequencies compared to the hand-held. Certainly not objectionable and in many cases desirable to have that frequency roll off. This is a great review with all the necessary info.
shubus 1 year ago
This is an excellent review, Thanks.
poprocz 1 year ago
Just got mine for christmas!
Just grabbed two 9v batteries! but they're not working ):
I hope the problem is the battery and not the device itself.
OhSnapitsJuzDin 1 year ago
@OhSnapitsJuzDin Did you test the batteries with your tongue? If you get a good zap, the batteries work. Make sure you get the batteries in correcty.
mlmlivesupport 1 year ago
@mlmlivesupport Turns out that one of the batteries didnt shock me. Made sure i had the polarities on the correct side ): but the red light doesnt light up ):
i'm in trouble huh?
OhSnapitsJuzDin 1 year ago
@OhSnapitsJuzDin If you didn't get the sting from the 9v battery, then its dead. When you can get a new one, then you can test it out.
mlmlivesupport 1 year ago
@mlmlivesupport I got stung by one of the batteries. And tested it out. The box didn't light up ):, but i'm gonna get a new fresh pair of batteries tomorrow and test it out again. If not ): then i have a bad pair
OhSnapitsJuzDin 1 year ago
@OhSnapitsJuzDin Thats not good. You should be able to light up the light with just one battery to test each one. Did you buy them brand new?
mlmlivesupport 1 year ago
@mlmlivesupport Got them as a gift. Sent from Amazon. And yes they were new. Pretty unfortunate
OhSnapitsJuzDin 1 year ago
@OhSnapitsJuzDin You will have to contact the seller about it if it doesnt work. They should let you know about replacing them.
mlmlivesupport 1 year ago
@OhSnapitsJuzDin Just got NEW Batteries, and they work perfectly! I guess the battery that i had Last night had some juice, but not enough to turn on the device.
OhSnapitsJuzDin 1 year ago
thanks for all the help btw
OhSnapitsJuzDin 1 year ago
can you use both mics at the same time?
Freakdeke88 1 year ago
@Freakdeke88 No, just 1 or the other. I don't think a splitter would work because a splitter would be stereo but the mics are mono. The ports may be mono too. You could always try.
mlmlivesupport 1 year ago
And you bought it? (refering to your extender?
Well at least this sounds good Wireless sounds good...
AHPZuazua 1 year ago