My advice as you only have one pump/rad would have been to split the loop. With you setup you are going to be passing the hotter liquid fromm the GPUs over ther CPU but if you split it before the GPU and said cooler water to the CPU and GPU at the same time (and rejoin the loop before going back to the rad)
hey i need help, ok so i went ahead and got the nvidia 680i black pearl edition, waited ages for it to come. it comes pre installed the all the blocks for water cooling. i have a 8800 gt graphics card with water cooling.. my knowlede is good with computers but not great with water cooling. can anyone tell me what i need to do next? like buy a water oump radiao etc
were did u get the SLi bridges from, i tryed staticice but yer... i got 1x XFX 8800GTX and wont to go SLi n only have 1 bridge, is there much performace increase this the 2?
you can get it from newegg. most people thing there is no performace increse, but i know with the newest nvidia driver youll see it. i did using 3dmark 06 to test
How do you have that set up? Do you have it like this: rad - cpu - pump - gpu 1 - gpu 2 - rad?
I'm thinking of watercooling and just wondering if it makes a difference how u set the loop up, I know cpu first then gpu, but I don't know if it really matters where the pump is placed. Thanks
in my case im overcloking the GPU more than the CPU so i made sure the hot liquid go to the radiator before it go to the GPU to cool it of then it go to the CPU. but if your overcloking both high, you need to make sure each cycle go through the radiator before it hit the other hardware
Hi ive jsut installed my first waterkit swiftec one jsut wondering its all ok but occasionaly it makes odd noises of water like the sound on a radiator (ps theres no airbubles in the tubes / block) is this normal
make sure you fell the tank to almost full, its normal to make nosies at first but its should fade after 10 min or less of running. also no air bubbles that always a good thing, you don't want to air in your liquid. its seems everything runing just fine in your case. just make sure you fell your tank to almost full. (HINT: best way to fell your tank while its on running. make sure you fell it away from your computer hardware. at your own risk. good luck. any qustion let me know
wtf, how did you get your q6600 to 3.60, mine only goes to around 3. Got basically the same swiftech system so heat should not be a prob but do you think my striker extreme is keeping me back?:(
ahhh i cant take it no more WATS THE NAME OF THE FIRST SONG lol, been looking every where for it. sweet computer mate looks great just wondering wat temps u get from it?
i got a amd 5200 am2 + 2 7900gtx in sli and there air cooled and there oc and sitting on cpu 35 - 42 and gpu 45 - 51
Max, Hey nice rig. I think 60C is the max for the intel CPUs. I would reccomend getting a better radiator....or get a 120rad and mount it in the loop between the CPU and the 2 GPUs
Hi MaxReckless99, congratulations! Your PC is really amazing! I'm changing my hardware, and my idea is to build a PC like your! Did you use another radiator besides the one on the rear panel of your case? If yes, what kind of radiator it is? Did you use a temperature control system in order to monitor the temperature of your coolant? Many thanks for your help! Best wishes!
thank you Hartman for the nice complement.the radiator im using Swiftech H20-220 kit and using it radiator, working like a dream. use the"Swiftech MCR320 radiator"to ensure that the CPU and Both graphic card stay cool, especially if your OC them, which im doing, and leave the fans on full speed at all the time.
THANKS HARTMAN, NO I DIDNT USE ANY OTHER radiator, TO MONITOR THE temperature I USE NVIDIA NTONES AND ATITOOL. WORKS PRETTY WELL WHEN USING NVIDIA GRAPHIC CARD AND NVIDIA mb. IF YOU NEED ANY OTHER QUESTIONS LET ME KNOW. AND TRY POST YOUR RIG WHEN ITS DONE.
Thanks for your suggestions, MaxReckless. They have been very appreciated. In these days I'm arranging my new system. I already bought 2 MSI nVidia 8800 GTX OC card via internet but they didn't arrive to me yet. I think to setup my PC with air cooling system before, but I'm planning to buy all the necessary stuff to pass to the water cooling system within next month. Then, I'll post my configuration videos here! :D
ill tell you why, 8800 GTX and ultra graphic card uses preconfigured sli technology that allows it to run on a single graphic card, that why its that powerful, well anyway using two sli bridges make you take the full benefits of the graphic cards, anyway try running 3dmark with one and run it again with two bridges and see the different, its not going to be that much but it will increase the performance by at least 1-2 %. give it a try and you judge.
3D06 is really random sometimes. You won't always get the same score. Sometimes I get 9200, sometimes I get 8900. And if you check evga forums and slizone forums, they say that it doesn't improve performance.
I want to buy gaming PC but do not know where. Can you tell me how?
Tadjiknorg 9 months ago
nice maroon5 songs lol
wwjoeyd 3 years ago
2 = *thumbs up*
XD
GunskiMod 3 years ago
the 220 rad cools all that with pretty good temps
SPLITZRZR 3 years ago
This has been flagged as spam show
┏┫ | | ┣┓ ┏┓
┗┫━━ ┃ ━━┣┛ ┣┫ ┃ ━━━━━ ┃ ┏┳┫┣┳┓ ┗━━┳━┳━━┛ ┃ ┃
━━━━┃ ┃ ┗━┳┳━┛
━━━━┃ ┗━━━━━━┛┃
arios211 3 years ago
hey what case do you have ?
dboib19 3 years ago
cable managment problems much?
toatq 3 years ago 7
huh why do u got 2 SLI briges? u need just 1 right?
nldubish 3 years ago
Yes you only need the one SLI bridge.
My advice as you only have one pump/rad would have been to split the loop. With you setup you are going to be passing the hotter liquid fromm the GPUs over ther CPU but if you split it before the GPU and said cooler water to the CPU and GPU at the same time (and rejoin the loop before going back to the rad)
Emexrulsier 3 years ago
i want a xfx mobo
Jclz95 3 years ago
Nice rig. How much did you pay for the ultra?
itar4 4 years ago
bought them when they first came out.about 699$
MaxReckless99 3 years ago
Man whats with showing this awesome PC without benchmarks ;p
Post some Crysis vids.
I have the same case also :)
aleckermit 4 years ago
So u only use a dual radiator ??? thats sweet
FabianVornkahl 4 years ago
hmm.. your computer is a bit untidy.... but good components
maxshared 4 years ago
this video just to show koolance and swiftech waterblocks working together doing a great job...
MaxReckless99 4 years ago
what is u cpu temp??
wander666 4 years ago
31 idle 47 max load
MaxReckless99 4 years ago
Is the MCR 220 QP back there the only radiator you are cooling your hardware with? =)
Best regards =)
FrodeFlodhest 4 years ago
yes. its working just fine.
MaxReckless99 4 years ago
cool computer....
dearinviolet 4 years ago
thanks
MaxReckless99 4 years ago
this thermaltake tube and coolant???
wander666 4 years ago
yes
MaxReckless99 4 years ago
This has been flagged as spam show
hey i need help, ok so i went ahead and got the nvidia 680i black pearl edition, waited ages for it to come. it comes pre installed the all the blocks for water cooling. i have a 8800 gt graphics card with water cooling.. my knowlede is good with computers but not great with water cooling. can anyone tell me what i need to do next? like buy a water oump radiao etc
williamlong1985 4 years ago
is that water pretty warm? because same water goes around cpu and gpu... (sorry my bad english, i'm from finland)
4nt1pr0 4 years ago
not really, its keeps my GPU and CPU ice cold. its really a good kit.. epically with the big raidtor
MaxReckless99 4 years ago
were did u get the SLi bridges from, i tryed staticice but yer... i got 1x XFX 8800GTX and wont to go SLi n only have 1 bridge, is there much performace increase this the 2?
NeOXG64 4 years ago
2 is just for show, it doesn't increase performance.
kmyerslp 4 years ago
No it increases the data transferred between them
rodog69 4 years ago
from newegg
MaxReckless99 4 years ago
you can get it from newegg. most people thing there is no performace increse, but i know with the newest nvidia driver youll see it. i did using 3dmark 06 to test
MaxReckless99 4 years ago
cheers, :P
NeOXG64 4 years ago
seems similiar to maxishines rig. yours definately looks nicer though.
bornfromdogfat270 4 years ago
thank you. ill try to post a new video of some upgrade i made using 3 way SLI ..3 8800 ultra
MaxReckless99 4 years ago
what sort of temps do you get CPU and GPU when runnign crysis or cod4?
dirtylarryuk 4 years ago
How do you have that set up? Do you have it like this: rad - cpu - pump - gpu 1 - gpu 2 - rad?
I'm thinking of watercooling and just wondering if it makes a difference how u set the loop up, I know cpu first then gpu, but I don't know if it really matters where the pump is placed. Thanks
brydon10 4 years ago
in my case im overcloking the GPU more than the CPU so i made sure the hot liquid go to the radiator before it go to the GPU to cool it of then it go to the CPU. but if your overcloking both high, you need to make sure each cycle go through the radiator before it hit the other hardware
MaxReckless99 4 years ago
Ok cool, thanks.
brydon10 4 years ago
Hi ive jsut installed my first waterkit swiftec one jsut wondering its all ok but occasionaly it makes odd noises of water like the sound on a radiator (ps theres no airbubles in the tubes / block) is this normal
sounirvalice1 4 years ago
make sure you fell the tank to almost full, its normal to make nosies at first but its should fade after 10 min or less of running. also no air bubbles that always a good thing, you don't want to air in your liquid. its seems everything runing just fine in your case. just make sure you fell your tank to almost full. (HINT: best way to fell your tank while its on running. make sure you fell it away from your computer hardware. at your own risk. good luck. any qustion let me know
MaxReckless99 4 years ago
ty man =D
sounirvalice1 4 years ago
what you get on 3dmark06. im just wondering. im going test out my 2 HIS Radeon 2900XT 1GB each card. :D
csNoxeN1337 4 years ago
using windows XP 19877 using q6600 quad overclocked to 3.60 stock 2.4
MaxReckless99 4 years ago
now im getting 22433 after overclocking the memory little more and the GPU
MaxReckless99 4 years ago
wtf, how did you get your q6600 to 3.60, mine only goes to around 3. Got basically the same swiftech system so heat should not be a prob but do you think my striker extreme is keeping me back?:(
crpezold 4 years ago
the ram cooler look lik a speaker lol
phudao41 4 years ago
4 video cards?
dApimpmx23 4 years ago
no just two 8800 ultra
MaxReckless99 4 years ago
lol 4
csNoxeN1337 4 years ago
ahhh i cant take it no more WATS THE NAME OF THE FIRST SONG lol, been looking every where for it. sweet computer mate looks great just wondering wat temps u get from it?
i got a amd 5200 am2 + 2 7900gtx in sli and there air cooled and there oc and sitting on cpu 35 - 42 and gpu 45 - 51
ChriscoHamper7689 4 years ago
maroon 5 goodbye goodbye, after overcloking im getting 59-60 on max load an 37 idle. keep in mind my CPU and GPU overcloked the max out of them
MaxReckless99 4 years ago
are u sure its goodbye goodbye i searched it found sweetest goodbye but its not the same
ChriscoHamper7689 4 years ago
i found it its called nothing last forever by maroon 5
ChriscoHamper7689 4 years ago
Max, Hey nice rig. I think 60C is the max for the intel CPUs. I would reccomend getting a better radiator....or get a 120rad and mount it in the loop between the CPU and the 2 GPUs
SoloBuggMaster 4 years ago
I just don't like how is go's to cpu to gpu to gpu thats lot a heat to pick up there.
golem72002 4 years ago
damn, you have to make some crysis vid's :D
FragtheSnack 4 years ago
i will, ill post it tom
MaxReckless99 4 years ago
thanks
FragtheSnack 4 years ago
nice setup dude.
csNoxeN1337 4 years ago
thanks
MaxReckless99 4 years ago
haha same screen,keyboard and speakers lol NICE haha
Makedonce93 4 years ago
Hi MaxReckless99, congratulations! Your PC is really amazing! I'm changing my hardware, and my idea is to build a PC like your! Did you use another radiator besides the one on the rear panel of your case? If yes, what kind of radiator it is? Did you use a temperature control system in order to monitor the temperature of your coolant? Many thanks for your help! Best wishes!
Hartman79 4 years ago
thank you Hartman for the nice complement.the radiator im using Swiftech H20-220 kit and using it radiator, working like a dream. use the"Swiftech MCR320 radiator"to ensure that the CPU and Both graphic card stay cool, especially if your OC them, which im doing, and leave the fans on full speed at all the time.
MaxReckless99 4 years ago
THANKS HARTMAN, NO I DIDNT USE ANY OTHER radiator, TO MONITOR THE temperature I USE NVIDIA NTONES AND ATITOOL. WORKS PRETTY WELL WHEN USING NVIDIA GRAPHIC CARD AND NVIDIA mb. IF YOU NEED ANY OTHER QUESTIONS LET ME KNOW. AND TRY POST YOUR RIG WHEN ITS DONE.
MaxReckless99 4 years ago
Thanks for your suggestions, MaxReckless. They have been very appreciated. In these days I'm arranging my new system. I already bought 2 MSI nVidia 8800 GTX OC card via internet but they didn't arrive to me yet. I think to setup my PC with air cooling system before, but I'm planning to buy all the necessary stuff to pass to the water cooling system within next month. Then, I'll post my configuration videos here! :D
Bye!
Hartman79 4 years ago
Why two SLi bridges? It doesn't improve performance or anything.
drtydzn12 4 years ago
ill tell you why, 8800 GTX and ultra graphic card uses preconfigured sli technology that allows it to run on a single graphic card, that why its that powerful, well anyway using two sli bridges make you take the full benefits of the graphic cards, anyway try running 3dmark with one and run it again with two bridges and see the different, its not going to be that much but it will increase the performance by at least 1-2 %. give it a try and you judge.
MaxReckless99 4 years ago
3D06 is really random sometimes. You won't always get the same score. Sometimes I get 9200, sometimes I get 8900. And if you check evga forums and slizone forums, they say that it doesn't improve performance.
drtydzn12 4 years ago 3
your right about 3dmark06 its random sometimes, but using two SLI wont hurt.
MaxReckless99 4 years ago
That's true. But as far as I konw, the reason they included to SLi "fingers" is two support a tri SLi setup.
drtydzn12 4 years ago
gorgeous, i think im in love
xoxx1234 4 years ago
kooooool
shrinathmukund1991 4 years ago
nice system!
PhillyKid07 4 years ago