(2) 18 inch FI Bl's doing the hair trick in the Jeep

[laysampson1231c]

I want this video on my T310 phone.

[brunnettzzelu17]

amazing.how many db?

[ernieconner718]

This video went viral on Guyana

[6old]

what the name of song plz

[Devin20852]

hey how did you flare the sonotubes...need help

[QuinnGallagher]

i want you to know, i went through with my project. everything worked out perfectly. except one thing. my whole damn car fell apart and like i said, i drive 99 jeep grand cherokee ltd. how do you do it man?

[drjd2real]

I can tell you got that box tuned low "the right way"! There are guys on here not moving as much air as you with the BTL 18's, claiming the same tuning. It's not their camera either because they seem to be struggling a little with the hairtrick.

[dudetwo123]

What amp/amps are pushing these two 18s?

[mouthpoker]

that was pretty impressive for two 1k subs not walled off! i subbed

[QuinnGallagher]

are these loaded? what options did you choose? im about to get me 2 of these as well and cant figure out what to do to make sure they hit like this. ill be running 3200w rms at 16v on a kinetik hc16v and all 0ga and big three too. like im trying to save money but i gotta get they hyper pole but i cant decide on the flatwind or not. cooling is not an option.

[BloodyFingerz]

what year is that jeep? thats a cherokee? did you have to remove your backseats?

[kohlslaw65]

my buddys system hits so hard it made his little brother throw up haha

[IHaveMoarThanU]

Holy fuck i want it.

[nickfs442]

she is hot as hell

[iluvithaha]

dope i want fi subsss

[bmxpimp554]

best part is :24 after "it makes my eyes tear"

"What."

[splferrell]

krazy i got 2 kicker 1500.1 on my 2 18'' bl take a look

[BIGwooferJAY]

thats sick ass fuck u dont even have BTLs ahaha cant wait to get my BLs

[queensny1991]

sick man nice setup!! just got a 97 GC with the intentions of hitting 150db at least, I think I'm going with two 18 Fis hahaa

[buglifethugs]

thats the shit!!!!

keep up the good work!!!

[abombAudio]

Hey awesome setup I have a re mt18" and was looking for a sono tube?can you mhalp me locate one? Thanks *****

[cjbears90]

hey bro, i got a question, i have 2 12 inch kicker cvr in a ported box on a kicker zx750.1 running at 2 ohms, and the shit beats hard, will a 15 inch fi BL running at 1300 watts rms, in a 4 cu foot box be louder than my CVRs?

[meowwwlucas]

yes.

[proonehander]

SLAMS!!!,dat shyt goes ham.but A bruh wuts da name of da song?

[03blackAck1028]

Thanks for the comments everyone. Name of the song is Gucci Mane- Hold That thought

[Spense626]

slammin homie... nice.

[12oscar12]

hey what is the max rms power on the 18" Bl's, i am planing on buying some

[03blackAck1028]

Normal BL's will do just fine with 900-1200rms. Fully Loaded BL's will handle 1400-1600rms.

[SkReWsToN281]

to FUCKWEEZY26 you're a dumbass for saying Fi Bl's are $600 each. They're between 300 and 400 dollars. I'm not exactly sure but you're still a dumbass. Slap yourself.

[03blackAck1028]

$868 shipped for both.

[efeyecaraudio]

god dam. very impressive!

[03blackAck1028]

Thanks man. Appreciate the comments everyone

[illegaleffect]

which would be better for two of these?

2-kicker ZX2500.1 amps or

1-Rockford Fosgate T40001BD

[walkingfreak]

Rockford T4

[berniebp87]

That was sick man! I thought you had it walled off so I got a little surprice when you turned the camera back! :-D Awesome system and awesome vid! Subscribed!

[03blackAck1028]

Thanks for subscribing. More to come soon

[rickymac21]

fuckin sick... good job.. cant really see the box all that great but from the looks of things you did a great job.... i was looking for some new 18's to try out and from the looks of things these should do just fine... do you think the q's fully loaded would do the same? basically make it like a stock BL ... either way. sick set up. i like the peacking low too.

[drunkgorilla]

whats the price for 2 18s?

[FUCKWEZZY26]

i just know dey like 600 each dey alot bra u good enuogh with only one

[K03N0]

ey so u think puttin about 1500krms to a fully loaded 09 bl would be perfect?

[DaTwinkie405]

Need that much to even get it moving.

[jesseadkins187]

hahah no shit

[KyleLindner]

Fuckin awesome...period

[topnotchclipsnvids]

hey thats a really awesome setup but can u please tell me where you got those aero ports and what kind of alternator your working with, brand and amperage. I would really appreciate the info.

[03blackAck1028]

Throw an AQ 2200d on each BTL. They need at least 2000rms for them to really shine. You are running the AQ @ .5 ohms so each sub is seeing roughly 1250 watts each, given you have the electrical to back it up and hold steady voltage. Send the BTL more power before you sell. All of AQ's amps are quite underrated and the 2200d will put out close to 2350 watts @ 1ohm at 14 volts.

[03blackAck1028]

What is your box tuned to? And what ohms are the subs ?

[Dennis23menace]

must be some loud mids and highs. Most vids of the BTL is just completely bass.

[03blackAck1028]

lol

[jacisneros86]

ill give her something to make her eyes tear up. hahah.

[chvylowridn00]

where can i find these ports at as far as buying them wise?

[TaylorRM1992]

what song is that?

[nickwhitinger]

hold that thought - gucci mane

[0mer09]

well ia m going to build my box this weekend...what ttuning do you suggest for the box i am building????

[03blackAck1028]

Staying around 33 hz is an overall good tuning which is " musical" and will still do decent # on the meter. If your strictly looking to put up a high # on the meter and dont care to sacrifice a bit of the "musical" propertys of the box , tune upwards of 37-38 hz. I personally like low tuning. Specifically 32hz and below.

[0mer09]

You think 2 12' FI bl can do that..well not that hard of hair movement but at least move hair?????

[03blackAck1028]

Depends on alot of factors such as the box build, power, vehicle it will be going in , tuning of the box , port area, etc. I have (2) fully loaded FI ssd in ported/tuned to 30hz box in the wifeys car . That does a tiny hair trick . Nothing close to my Jeep though lol .

[pboyski]

damn bro thats movin alot of air! impressive for only 2k watts! can i see the port opening on your box?

[MistaElvis]

hey, what would you recommend 1 18" fi btl? 2 18" fi bl? or 2 15" kicker l7's? i wanna be loud and maybe set off a car alarm just for fun! :]

[03blackAck1028]

Depends on how much power you have .. and mainly how good the box and install are. If you have around 3000rms then Id go with 2 fully loaded BL's. If you have 4000rms+ then I would look into either 1 or 2 BTL's . The 15inch L7's would be a toss up between the one 18 inch BTL given both drivers had the correct watts being sent to them.

[anj46907]

btw what u using for amps on those subs?

[boomingtothemoon]

that is just sick! Very impressive for the given power and cone area.keep up the good work.You compete at all ? Any #'s.

[anj46907]

nice system, whats the song called? i just got my two 18'' bl's come in and building a wall for em i wouldnt mind trying that song out

[03blackAck1028]

Thanks man , song is "Hold that thought" by Gucci Man. Peaks right around 33hz.

[03blackAck1028]

Right now there is only (1) AudioQue 2200d on both subs. Come spring time I should be putting another AQ2200d in . 1 on each sub . Thanks for the comments guys...

[Fleepage]

be easy on the gains, if you put 2200rms on the each of the bl's thats a bit too much for them. if you wanna do that get some btl's ;)

[03blackAck1028]

No worry with the gains . Subs will be wired at 2 ohms (subs are 1ohmDVC). Had the amp benched/clamped at 1,514 watts at 2 ohms at 14v so each sub will do just fine. Gains are set currently with the DMM to right around 1000rms to each sub with the one AQ2200d. BTL may be a future upgrade but thats a different story lol .

[boombaklot]

now thats bad ass subs

[jesseadkins187]

Nice! What Amp u pushing them with?