would it be possible that you are actually charging and changing the pole's side, from north to south? depending on materiel and side of the battery and when connected iron to iron, is this making the poles to move on the wires itself than on the ends? or if its just not pushing enough?
I am going to wager that the reason you get some current from same metal to same metal is that there is a capacitive effect going on with the dissimilar metal combined with oxidation of the copper.
place a iron tube around the coil and have the tube contact with the core. in the inside of the wires you will get more power..............great work.very nice
Like I posted on the OU thread NBS in the patent talks of connecting the 5 & 6 wires but note he says so in relation to Figure 4, which shows the secondary coil on the core, which would seem to imply to try the em with the secondary coil upon the device, not without.
On my 2 NS coils I always got the highest volts and Ma reading from either the Cu to the core or the Fe to the core. Have you checked these readings yet?
Your research is moving us forward and you are doing great.
its because copper is more conductive than steel or iron which creates a stronger electric current thus a greater magnetic field
Sillsy55 1 month ago
This has been flagged as spam show
would it be possible that you are actually charging and changing the pole's side, from north to south? depending on materiel and side of the battery and when connected iron to iron, is this making the poles to move on the wires itself than on the ends? or if its just not pushing enough?
chrislepageful 1 month ago
Comment removed
chrislepageful 1 month ago
I am going to wager that the reason you get some current from same metal to same metal is that there is a capacitive effect going on with the dissimilar metal combined with oxidation of the copper.
Pruncible 10 months ago
Hi, can you use steel wire to make an electromagnet ? - it conducts electricity the same a copper ?
lykenth08 1 year ago
Excellent job! But what if u heat the battery. I'm sure u get more effect out of it with the proper coupling...
sonydogman 1 year ago
Lol, why are people flagging these videos?... u MAD? Keep up the good work
neuthral 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies r doing everything they can to stop this
information. If you want a Free energy magnet motor , get the blueprints at LT-MAGNET-MOTORdotCOM , Join the
revolution!
slanderousndgs 1 year ago
thanks again lasersaber. This is WONDERFUL STUFF.
aetherevarising 1 year ago
might be interesting to coil another transformer around the whole thing.
when you pulse the EMF. to pick up on the field collapse.
Sm0ky2 1 year ago
place a iron tube around the coil and have the tube contact with the core. in the inside of the wires you will get more power..............great work.very nice
jasonspinmaster 1 year ago
is the wire wet in this video?
great project.
crob227 1 year ago
very nice video
impressive results
koolerization 1 year ago
Like I posted on the OU thread NBS in the patent talks of connecting the 5 & 6 wires but note he says so in relation to Figure 4, which shows the secondary coil on the core, which would seem to imply to try the em with the secondary coil upon the device, not without.
Wintermuteai1 1 year ago
Laser:
On my 2 NS coils I always got the highest volts and Ma reading from either the Cu to the core or the Fe to the core. Have you checked these readings yet?
Your research is moving us forward and you are doing great.
Bill
Pirate88179 1 year ago