How to install SR forks

[NP0970]

nice dinousaur computer :D hahaha :b

[Pro60modman]

@NP0970

Still have it too. In fact I'm typing this comment on that same keyboard as well.

[NP0970]

@Pro60modman hahahah :)

[sk8r4life966]

the reason you dont need a compression is because of the pinch ring or w/e its called if you were runnin an fsa which pinch rings suck then you would have a major problem

[MattScooters13]

nice music fag but now i know hot to install iy

[theskaterkid34]

will the sr fork with an old a razor heatube or only the pro

[lonewuf]

how do you not ride without compression? Does it not wobble like shit?

[dilm1]

those are ugly as hell haha.they look strong thoughh

[roeilevy]

are you seriously that stupid???, if you don't have compression 1st of all you cant make it compress unless you put the wheel on then lean on the bars really hard while doing up the clamp which due to the threadles forks will come loss over time then you have to do it again, and second of all they are threadles which mean they need compression!.

[Pro60modman]

@roeilevy

People like you grossly misunderstand the point of a compression system. First of all compression is the wrong name for them because they don't compress anything. They keep the fork and bar from separating or getting loose. I ran my scooter like this for a long as time and I STILL don't use a compression system.

[royscoots24]

@Pro60modman na cunt? you messed in the head,, a compression system compresses the head set to the forks you dumb sun of a bitch!!!!! omfg you that special you sped! no shit it compresses shit its supposed to and your to fucking dumb to understand that! jessus christ man!

[chrisstowers123]

@royscoots24 bahahahaha roy unleashing the beast among these people :)

[yoobrahh1]

@Pro60modman actually compression systems are to compress the bottom and top headset and bearing races together so there is no wobble or slack in the headset or headtube dumbass so roeilevy is right and it is called a compression system and it does compress.

[TheScooterTutorials]

@roeilevy You are wrong, You dont need to do all that, Install fork headset compression and bars not hard at all buddy.

[randoMscOOterS]

do they fit on madd gear pros

[CoreyChromatic]

do you still have that fork?

can i buy?

or ill trade you my striker, its powder coated flat black :) please reply

[AwesumPossum123]

they have them on scooterresource its called the SenioR Fork

[paintballskater77]

@AwesumPossum123 SenioR forks are the newer ones. this is old school first ever threadless fork

[CRIMCOscooters]

@jakeheppard hahahaha

[MrMITCHscooters]

there gay just get inward forks those forks are to chuckny

[undeadchicken24]

im sellin one

[coltonjr2]

lol, i am getting a senior fork, and wheres your compression?

[aznskaterLOL]

omg theyre making them again. its in stock and theyre naming it the proto senior forks. go out and get them!

[ConnaScooters]

they dont do sr forks anymore its gay!

[albertarriaga48]

where do you get those forks??? I have been looking for those???

[jakeheppard]

isnt this the song fromm 2 girls one cup?

[jimmysimplesemple]

is slack in the forks where the head tube stays still but the fork and bars move?? plz reply that is happening to my scooter and its annoying the fuck out of me

[squirrely911]

Yeah that's slack

[crazymofo8008]

where do u get the SR forks

[CHUCKcanSCOOT]

from scooter resource . com SR-scooter resource

[chrisisafoo]

your forks were threadless though...you need a compression

[Pro60modman]

I never used a compression system and it worked fine for me. Thats a misconception, you dont need a compression system.

[lilwerm50]

didint ur headset come loose

[TheScooterTutorials]

@Pro60modman Nowthat is a misconception, You need a compression no matter what kind.

[Pro60modman]

@TheScooterTutorials

Using the bars themselves to keep the forks in place is not a kind of compression setup? I'm 215 pounds I think I take a scooter's parts to the extremes. I never had problems out of the setup.

[iluvrandomnames]

how do u take the stock forks off?

[Pro60modman]

take the bars off, unscrew the upper part of the headset and the forks will fall out the bottom.

[iluvrandomnames]

i tried that but the forks stayed attached to the folding mech bit. should i give it a tap with a rubber mallet or something?

[MrRonnietaylor]

FOR FUCK SAKE, why dont they sell SR FORKS anymore, i really need/want them! :@ sell me them!

[bassboy219]

where can u get sr forks or any other good gear, please reply

[Sc00terMitch3]

sr forks u cant buy online u have to get it from some1 on sr. theres inward forks(inward-scooters(dot)com)­, french id and proto striker(both at scooterresource(dot)com)

[bobobrothers28]

thats not the way you do it but whatever

[evoxtremeskater]

video FAIL

without compression system it sucks like shit

[cutekitty111]

do have to make these or can you but them somewhere like ebay

[ISC00TSC00T]

will a fsa unsealed headset work to run a threadless inward fork ?

[Pro60modman]

Why wouldn't it? I think sealed headsets are slower than unsealed.

[squirrely911]

Dude, where can I get a threadless headset, I just ordered those inward zero forks

[Pro60modman]

just get a 1 1/8" headset off ebay. FSA pigs are cheap and one of the best. Its what i was running in this video.

[XsilvRthree]

u can get tha forks on scooter resource store online

[RQScooters]

whata bout if u dnt have a nother headset and u hav the stock headset

[Pro60modman]

then you cant use them.... they are called threadless forks for a reason

[squidwardscooters]

what about compression?

[xdeathoreox]

i can't find them any where! google sucks balls now becuz nothing shows up with what i want. it's like it's not on the internet anymore

[bobrocks87]

wer did u get those

[Pro60modman]

scooter resource 2 years ago.

[CooperScoots]

lol arnt u a ment to have a compression system

[mdragondz]

how much would cost me to install my fork in the bike store?

[Pro60modman]

Thats retarded do it yourself.

[mdragondz]

ok, i thought i need heavy duty tools lol

[Ri4n95]

Where do u get themmm from

?

[Pro60modman]

scooterresource

[xkoollkidx]

scooter resource ddont have themm. i want them soo bad

[Ri4n95]

where do u get them??

[brandonsmithcrf250]

where did u get them foe how much and what wheels r u useing

[scootering07]

were did you get it

[guitarguy950]

the stock razor headset is threaded right?

[Pro60modman]

Yea

[royalslurp33]

so on the pro u can just slide the bars on

[sC0oTerSRulE]

hey nice music =]

[scootering07]

whats a compression sistem???

[scooters4lif2]

u have to take that plate off or u cant do tailwhips

[go2hellandfast]

Where can i get these forks??

[nicmacris1]

how do u take the forks off to begin with

[TheKiDwHosKateS]

do you need a pinch ring and new headset

[H20polo7]

can you run stock razor bars with the thread less forks because i don't have enough money for BUFF's

[Pro60modman]

yeah

[H20polo7]

do i need a compression system

[H20polo7]

and a different headset

[Trooper993]

i got everything, but the headset part, with the pinch ring and stuff.

[Freestyler5555]

where do you get that

[razor12345678910]

do u need buff or one piece bars to install thredless sr forks...............plz reply

[AustinDBartlett]

no..

[nickrulz07]

were do u get them from

[EXTREME88888]

oh and what wheeles is on the front

[scooterkid01]

Yak low profile wheel??? maybe???

[Pro60modman]

yak lo pro. They suck as back wheels for me because im 215 pounds but last forever up front

[EXTREME88888]

why didn't you get them painted (SR forks)

[behappylifeisgood]

this vid doesnt explain how to put in the starnut and compression system...

[Pro60modman]

never used it....

[tirtuio]

well you should... cuz people mostly have trouble with that.

[samlikessomeoneyes]

For threaded SR do u have to use pinch ring thingy?

[samswellcool]

is that "pinch ring" neccersery for the instilation?

[farmorochfarfar]

Wow nice work man and music lo l:D

[WiseMother]

nice music

[bmxshaunbmx]

so this can work without a compression system?

[Pro60modman]

yea i never use em

[lm3ball]

no compression system?

[EmsiGemsi]

where do i get those?

[jackdillonbike]

that was so helpfull! Thanks for making that vid!

[youtuberob]

wait, you didnt have a compresion system did you?

[imluvinyourmum]

i want these forks bad! how i get them? and how much?

[Pro60modman]

you put them in cage down into the cup so the balls are up and slide freely on the races of the fork and upper track

[noctournalscooters]

u put the headset bearings inwrong