mate, this bike is cool, why not post a video with you getting chased by the cops, I think you would get away, if not just tell them you were insane..
i used to have one and i would have one hand on the brake and one on the govenor on the engine so i would rip the engine and the tires would scream but that was on a 12hp mini bike
by the way the walmart spedos are junk and inacurate my 6.5hp motor toped out at 40mph and it wasnt a clone motor it was a honda clone motors are shit compared to real name brand motors like honda and i had a radar gun
@89fordpickup i have also verified it with gps.. the clone engines work great i have a genuine honda gx200 too. i would know. and my gearing is probably higher than yours.
Sube el manillar o consigue uno de moto con estilo Chopper , y las piernas deben quedarte mas estiradas así que debes colocar los pedales mas adelante
@pete9619 Haha.. Talk about torque.. Im putting a 35+ hp 2-stroke polaris engine on one that I have.. And it's going to have a comet torque converter drive on it.. Top speed is around 70+ im hoping.. But i have welded disc brakes on it.. So it stops pretty quick.. Better than those rim brakes!!
@loh1110 because of the gearing, it probably takes a while for the revs to wind up into the power band. I was on a pocket bike with the same problem - claimed top speed of 40 mph but boy was it slower than a granny on a bicycle of the line. The revs gradually built and at 20mph I ran out of car park. Lift the back wheel and the engine would rev to BAAAAAMMMM BAAAMM!!
Nice build. If you still have the bike remove the friction clutch and install a comet torque converter kit. You will have all the take off torque you'll ever need and rapid acceleration. Besides the price tag (180.00 bucks) nothing but gains with the conversion. They also had a disc brake kit for this bike,but don't know how well it worked.
@MrCherubhair1 Well, if it hasn't happened by now it probably won't. I was mainly concerned about the rib brakes not being designed for that kind of speed, but if it works, it works. I was also thinking of what might happen to the frame's structural integrity. I'm happy to hear I was wrong.
i would check your clutch. your gona weld it to your shaft trust me you can hear it squeeling when u take off plus i bet it turns red hot after about 20 min of rideing the clutch is too weak for the motor.
Hey I'm installing a pull start engine as well and like the look of the pedals as footrests, how did you reverse the pedals like that and keep them to stay at that angle??
maybe someone has already mentioned this....... have you considered installing a jack shaft? Seems like you have everything working good, Goes fast, only it looks like you don't have much torque to climb hills. Unless your only interested in speed. Either way seems like job well done.
Yeah I understand all to well. Just finished building my own motorized bicycle. Just building my chain tensioner took 3 different designs. So i understand when it comes to changing anything.... anyways
check my channel if you want to see my bicycle creation... let me what yu think when you get around to it.
@jcadlols What is the diameter of the exhaust exit? You might be able to find a bent pipe fitting or something if you don't have anything to bend it with. :)
@NuttersForFraggle I'm not in english class no need for punctuation is there, oh by the way you misspelled stupid. next time don't misspell when your trying to be the punctuation police, but then again i am sorry you just have a 4th grade reading level anyway.
hey where did you get the kit im interested in building one of these or posibly buying one? if anyone know aanything or is selling one my email is geabyer@yahoo.com
lol!, what a dumass. you wear shorts while your next to the engine block.. do u have any idea how hot that gets?!, then you take the silencer of the end of the exhaust. while its still hot. fuckin hell. only americans
i built one of these with a 3.5 hp briggs motor for like a 150$ bucks cause my frend gave me the bike and motor. it tops out at obout 40mph but the one thing that suck about it is that is so slowwww on take off i thought it was cause i used a dirt bike tire in the rear but i saw u have the same problem so its got to be the clutch of the gear ratio it may be the clutch i got mine frome some place in sanford fl. where did u get urs ?????
@TheStealther yes it will! you will need a brake light, head light, turn signals, speedometer, and a license plate holder then you can get it registered and get a license plate and of course a motorcycle license and then boom street legal!!! dont forget to put on your new tags every year!!!
Dude, that is pretty bad-ass for fabricating on your own..without a bike motor kit. Just awesome. I saw another video on youtube of a guy who made a board-track racer replica using the same/similar engine from Harbor Freight. Those suckers put out a lot of speed. Great work!
hey man, do u mind sending me an inbox with more or less detailed info about how u built the bike? not so much where you bought parts and stuff.. just if u feel like it :D i was planning on starting a project like this at the start of summer. thx in advance m8! good job btw, it looks bloody awesome ;)
Hey dude, nice idea to buy the tank off ebay. Careful with the exhaust though, i burnt my leg on one before (a road bike) and still have the scar till today.
Hey dude, nice idea to buy the tank off ebay. Careful with the exhaust though, i burnt my leg on one before (a road bike) and still have the scar till today.
i was out and about on my old kit a few monthes ago and got tired of constantly having to fix the darn stock throttle handle thingy. ended up just routing it to a brake lever and found it a lot better.
i built a diamond back drifter with the same engine from harbor freight but i did not like the way the engine hung over to the far right as far as balance goes so i had to fab a custom jackshaft...u did a awesome job u should be proud and i think it looks awesome.....its a great feeling isnt it to build something that wasnt meant to be and bring it to life..these punks that cant say anything positive should try to build one before they run there paper punk lips!!!!!!!!!!
@aassdd85 i got one of those motors from harbor freight for 99$ and the bike is cheep .i put that motor on a kids mini 70 cc 4 wheeler now its a 196 hehe!!!
@aassdd85 you are an idiot a rich kid would have went out and bought the most expensive name brand motorcycle his parents would have let him on the other hand you have a child im sure in the upper middle class saving money but using his brain to make something a lot more intriguing and self satisfactory but alas we have idiots like you with random idiotic comments it never fails us good old you tube
You should have put a pluming elbow steel fitting on the exit part on your engine so the exhaust can shoot out much easier. you lose power the way you have it now. or go to home depot and get some electrical tubing and just use the pipe bender they have there and just bend the pipe so you don't have the trouble of spending almost 80 bucks on one when you can just do one simple bend there. or just spend 15 to 20 dollars on a big size pipe bender at a swap meet. That will work
take off the blue pulstart housing and paint it red or black then put it back on it throws off the whole bike , other than that nice job , check out my minibike vids
cool...but! i can see you are using a motored bicycle gas tank...so im guessing you used to have the kit....what you should use for the chain is #40/41 pitch chain cause it wont break like the stuff from the kit. And second, you could have used the rear brakes by routing the chain under the rear arm, and you could of used the throttle from the kit as well, but still..really awesome bike
pow maneiro
gatinho14lucass2 2 days ago
This has been flagged as spam show
where can i buy a small rubber tubing running from the engine to the fuel tank? it is the one that pumps the tank :/ mine's broke down HELP!!
sk8rpoll 1 week ago
mate, this bike is cool, why not post a video with you getting chased by the cops, I think you would get away, if not just tell them you were insane..
critchley3819 2 weeks ago
take that lawn mower pipe of the end and you will have a better sounding bike and faster
TheAustinblankenship 2 weeks ago
nice end of road sign
juniortore1 3 weeks ago
i used to have one and i would have one hand on the brake and one on the govenor on the engine so i would rip the engine and the tires would scream but that was on a 12hp mini bike
lot of fun :)
scrapcrapMandM 4 weeks ago
How many meters tall is this kid? I want to buy a bike like that, but this seem so its small, compared to the height of the kid.
vcnaosabia 1 month ago
thats awesome hahahah
Howaboutyougetfarked 1 month ago
i mean vertical
venator1994 1 month ago
is that a horizontal engine tipped sideways?
venator1994 1 month ago
today is a sad day... i lost my bid on ebay for a chopper bike...
DoNkEyDuK 1 month ago
haha nice welding for the exhaust....
KrazyKaliforniaKid88 1 month ago
what mods did u do
SArulz1 1 month ago
by the way the walmart spedos are junk and inacurate my 6.5hp motor toped out at 40mph and it wasnt a clone motor it was a honda clone motors are shit compared to real name brand motors like honda and i had a radar gun
89fordpickup 1 month ago
@89fordpickup i have also verified it with gps.. the clone engines work great i have a genuine honda gx200 too. i would know. and my gearing is probably higher than yours.
thulination 1 month ago
7 envidiosos....
jererobel 1 month ago
who the fuck would want to ride this?
spanelj 1 month ago
@spanelj who the fuck wouldn't??
imtheman 1 month ago
i
k<mxidjkfmkmfdjthgjfkkv
SimonaTobi 1 month ago
Sube el manillar o consigue uno de moto con estilo Chopper , y las piernas deben quedarte mas estiradas así que debes colocar los pedales mas adelante
rclr509 1 month ago
Nice, sounds like you will burn out your clutch quickly though.
esqueue 2 months ago
love your bike dude!
rifting1224 3 months ago in playlist Liked videos
kkkkkk, eutenhoo uma assim tbm iradoo
bugalazare 3 months ago
This has been flagged as spam show
I should have kept my chopper/bike to do the same thing.
Kpaine17 3 months ago
i can jogg faster than that.
gdog5ifty 3 months ago
@gdog5ifty damn you can jog faster then 55mph???
12345senoj 2 months ago
awhile back i used a 16" version of the same bike with a 49cc 2 stroker slow to go, but hit close to 50. scary ride tho!
nstable 3 months ago
me and my dad are building the exact same thing but my bike is black
dose your have a lot of torque?
pete9619 3 months ago
@pete9619 Haha.. Talk about torque.. Im putting a 35+ hp 2-stroke polaris engine on one that I have.. And it's going to have a comet torque converter drive on it.. Top speed is around 70+ im hoping.. But i have welded disc brakes on it.. So it stops pretty quick.. Better than those rim brakes!!
blakegorman69 3 months ago
@pete9619 i been using hydraulic caliper and disc on everything i build... i aslo have a comet that was on my go kart. man, that thing was nice
nstable 3 months ago
thats sick man
Super79CamaroZ28 3 months ago
you should put a bigger sprocket on the back
ismokewead420 3 months ago
Comment removed
ismokewead420 3 months ago
хуйня
Alexandr178 3 months ago
this bike are cool,
but this kid riding looks a retarded...
alexkuse 4 months ago
@alexkuse your english is retarded
pa3888 3 months ago
@pa3888 Thank God I do not live in the Babylon
alexkuse 3 months ago
awesome bike. Those motors aren't really supposed to pull 55 though. i did that mod to my baja and fucked the crank seals almost immediately.
alexsuchapimp 4 months ago
55 my ass
loh1110 4 months ago
@loh1110 I think it might and I say might... reach 35 on a good day.
TheLovshak 4 months ago
@TheLovshak a vehicles rolls down a bumpy street @ 55, you better have suspension in the back as well if you don't want to fly.
loh1110 4 months ago
@loh1110 because of the gearing, it probably takes a while for the revs to wind up into the power band. I was on a pocket bike with the same problem - claimed top speed of 40 mph but boy was it slower than a granny on a bicycle of the line. The revs gradually built and at 20mph I ran out of car park. Lift the back wheel and the engine would rev to BAAAAAMMMM BAAAMM!!
TimpBizkit 4 weeks ago
COOL...
StrikerTripleThree 4 months ago
what did you use to mount the engine im doin a simliar project with same engine please respond it will hepp a million******
LILJOJO567 4 months ago in playlist More videos from thulination
@LILJOJO567 helppp********
LILJOJO567 4 months ago in playlist More videos from thulination
how do you like that clutch?
hello12165 4 months ago
I like the method of removing the hot muffler.
legogunguy001 5 months ago
how did you make the engine mount
crzytnn 5 months ago
Also, get a sweeping bend for the exhaust. Tight 90 restricts flow.
jackpontiac52 5 months ago
Nice build. If you still have the bike remove the friction clutch and install a comet torque converter kit. You will have all the take off torque you'll ever need and rapid acceleration. Besides the price tag (180.00 bucks) nothing but gains with the conversion. They also had a disc brake kit for this bike,but don't know how well it worked.
goodmechanic 5 months ago
@goodmechanic I was going to say the same thing!!!
jackpontiac52 5 months ago
Let me see, you drilled and welded your bike frame to install an engine that'll push it 55mph ... with rim brakes. Hope you have life insurance.
MTJLT 5 months ago 21
@MTJLT Why? What do you think will happen?
MrCherubhair1 1 month ago
@MrCherubhair1 Well, if it hasn't happened by now it probably won't. I was mainly concerned about the rib brakes not being designed for that kind of speed, but if it works, it works. I was also thinking of what might happen to the frame's structural integrity. I'm happy to hear I was wrong.
MTJLT 1 month ago
@MTJLT nice V-Brakes aren't bad if set up properly, unless he's going to race with that thing he'll be fine.
Kalimerakis 6 hours ago
nice grass
DevonPoko8 5 months ago 23
Nice bike, fuk the trolls!
Weldin810 5 months ago
i would check your clutch. your gona weld it to your shaft trust me you can hear it squeeling when u take off plus i bet it turns red hot after about 20 min of rideing the clutch is too weak for the motor.
Bad55Taco 5 months ago
were did you get the torque clutch and chain tensioner
TraxxasRC07 5 months ago
i'll buy it for $200
KDGOON18 6 months ago
Hey I'm installing a pull start engine as well and like the look of the pedals as footrests, how did you reverse the pedals like that and keep them to stay at that angle??
ReggaesRockers 6 months ago
maybe someone has already mentioned this....... have you considered installing a jack shaft? Seems like you have everything working good, Goes fast, only it looks like you don't have much torque to climb hills. Unless your only interested in speed. Either way seems like job well done.
Microillusions 6 months ago
@Microillusions
im definately using a jackshaft next time. you are right it accelerates kinda slow.
thulination 6 months ago
@thulination
Yeah I understand all to well. Just finished building my own motorized bicycle. Just building my chain tensioner took 3 different designs. So i understand when it comes to changing anything.... anyways
check my channel if you want to see my bicycle creation... let me what yu think when you get around to it.
Microillusions 6 months ago
@thulination excuss me but how does it idle?
hissy08 4 months ago
@Microillusions WHATS A JACK SHAFT????
Icecube5285 3 months ago
Comment removed
shanebill9 6 months ago
You might get a bit more out of it if you can use a bent piece of pipe for the header. But great work, it's awesome. Haha :)
jcadlols 6 months ago
@jcadlols What is the diameter of the exhaust exit? You might be able to find a bent pipe fitting or something if you don't have anything to bend it with. :)
jcadlols 6 months ago
bosted
luisnaves100 6 months ago
stupid kids
dehsantanao 6 months ago
@dehsantanao They thought Henry Ford was stupid in 1896, also!
jackpontiac52 5 months ago
don't to go to far with that china junk motor,
utilitykiller1972 6 months ago
lol nice pip ...
utilitykiller1972 6 months ago
maybe u should consider a B & S tuning exhaust pipe, makes these engines sound so much better.
Benji19922 6 months ago
dam 55mph!! thats nuts, they need to increase the engine size on the motorized bike kits, i want more power then my measly 66cc! :[
NikkoFiT 6 months ago
55mph? That's faster than my go-kart with a Honda GX270!
b0bsaget007 6 months ago
@NuttersForFraggle I'm not in english class no need for punctuation is there, oh by the way you misspelled stupid. next time don't misspell when your trying to be the punctuation police, but then again i am sorry you just have a 4th grade reading level anyway.
APBTisBeast 6 months ago
whats the name of the motor/where u got it from/brand name?
Mexican6320 6 months ago
how fast?!
melvintjuh999 7 months ago
just asking how old are you? :S
steveo32126 7 months ago
hey where did you get the kit im interested in building one of these or posibly buying one? if anyone know aanything or is selling one my email is geabyer@yahoo.com
imbrazilian1991 7 months ago
lol!, what a dumass. you wear shorts while your next to the engine block.. do u have any idea how hot that gets?!, then you take the silencer of the end of the exhaust. while its still hot. fuckin hell. only americans
jajr18m 7 months ago
sounds like shit
FishTildawn 7 months ago
is that the stock chain?
foxrider89ify 7 months ago
spark it or park it!
mpaoness 7 months ago
how much £$
choppy168 8 months ago
and it uses a bigger chain
mrbeadfory56 8 months ago
i have a suggestion for you. put a the AIXRO XR50 rotary engine
mrbeadfory56 8 months ago
lol the lawnmover has wheel and a ram on it!!
vickefye 8 months ago
i built one of these with a 3.5 hp briggs motor for like a 150$ bucks cause my frend gave me the bike and motor. it tops out at obout 40mph but the one thing that suck about it is that is so slowwww on take off i thought it was cause i used a dirt bike tire in the rear but i saw u have the same problem so its got to be the clutch of the gear ratio it may be the clutch i got mine frome some place in sanford fl. where did u get urs ?????
MyBeast199 8 months ago
nice
honda4x4esjoseph 8 months ago
i had that bike i gave it away it was blak :(
tirell99 8 months ago
you need a bigger exhaust. lol
NickelbackPWNS 8 months ago
nice mines ten times beter good work
rosscam114 8 months ago
Cool bike!! sorry bro welds look like shit!!!
ronb218 8 months ago
i like your foot pegs!
mrphotographyperson 9 months ago
nice ride, I made one also,, there fun as hell
mustie1 9 months ago
damn that clutch is loud
TheAssassin111 9 months ago
make it road legal....
fladam1994 9 months ago
dude. If you did put a brake light, normal lights and maybe indicators (and license plate holder) would it become streetlegal?
TheStealther 9 months ago
@TheStealther yes it will! you will need a brake light, head light, turn signals, speedometer, and a license plate holder then you can get it registered and get a license plate and of course a motorcycle license and then boom street legal!!! dont forget to put on your new tags every year!!!
blowupuate13 9 months ago
Dude, that is pretty bad-ass for fabricating on your own..without a bike motor kit. Just awesome. I saw another video on youtube of a guy who made a board-track racer replica using the same/similar engine from Harbor Freight. Those suckers put out a lot of speed. Great work!
bthom88955 9 months ago
Lolz! $100 for a 6.5hp engine and that can't be beat? Princess Auto sells the same Clone motor for $80. Good job on the bike though. Looks good.
doomsd46 9 months ago
Sounds good too :O)
Naddycat 10 months ago
nice man.
12345ybbob 10 months ago
hey man, do u mind sending me an inbox with more or less detailed info about how u built the bike? not so much where you bought parts and stuff.. just if u feel like it :D i was planning on starting a project like this at the start of summer. thx in advance m8! good job btw, it looks bloody awesome ;)
Mrmasternik 10 months ago
PLEASE TELL ME WHERE? REPLY ASAP
uSee218 10 months ago
WHERE DID YOU BUY THE ENGINE?
uSee218 10 months ago
I am wondering how fast it goes and where your got it because i might put it on a motor scooter. please reply!!!!!!!
jellybeanssomething 10 months ago
Where did you get a different intake filter setup
minitrucker84 11 months ago
nice bike
rifting1223 11 months ago
Is this legal?
TheMooseofBattle 11 months ago
Hey dude, nice idea to buy the tank off ebay. Careful with the exhaust though, i burnt my leg on one before (a road bike) and still have the scar till today.
MrCustome 1 year ago
Hey dude, nice idea to buy the tank off ebay. Careful with the exhaust though, i burnt my leg on one before (a road bike) and still have the scar till today.
MrCustome 1 year ago
Nice work, that thing moves. Wouldn't you rather have a twist grip throttle?
Scootertuner1000 1 year ago
not loud enuf
MrFrj123 1 year ago
@MrFrj123 the video doesnt do it justice. i havent seen the bike but i got one of them motores strajgt piped and its pretty loud
pickupman6 1 year ago
Nice bike, how many mpg do you think it gets?
mark16443 1 year ago
hey mate i am doing the same thing as what u r doing put my gear ratio is too high i was just wondering what your gear ratio is?? please reply
MrRipcurl123 1 year ago
is that a 60 teeth sprocket at the back and 12 teeth on the clutch? nice bike
donyboy73 1 year ago
i'm going to buy that engine for my project stingray. Where did you get the clutch?
cigarr0000 1 year ago
i was out and about on my old kit a few monthes ago and got tired of constantly having to fix the darn stock throttle handle thingy. ended up just routing it to a brake lever and found it a lot better.
TheIndustrialphreak 1 year ago
wow that is cool
GarrettJDB 1 year ago
hey what is that speedometer called that you have
USApunk07 1 year ago
im working on this rite now
thebobbyburrito 1 year ago
lol i had a 6.5 on a chopper like this one time but it was the up right motor.
matthewmarrs123 1 year ago
i built a diamond back drifter with the same engine from harbor freight but i did not like the way the engine hung over to the far right as far as balance goes so i had to fab a custom jackshaft...u did a awesome job u should be proud and i think it looks awesome.....its a great feeling isnt it to build something that wasnt meant to be and bring it to life..these punks that cant say anything positive should try to build one before they run there paper punk lips!!!!!!!!!!
kelseanali88 1 year ago
haha i got the same bike but its bigger.
hardyboi149 1 year ago
Is the rear wheel a surly large marge?
Orangebike666 1 year ago
are you bypassing the governor
loweylegend 1 year ago
why is the clutch so damn loud?
superfunnyman123 1 year ago
this is 50cc ? :/
vladoiraklisg10 1 year ago
@vladoiraklisg10 dude. its a 6.5 horse power 4 cycle engine.
pontiacpanic79 1 year ago
that would be cool to do wheelies on
Sims3fan2000 1 year ago
@Sims3fan2000 i can do a wheelie on this bike but not with the engine on it
mrlawnmowerman89 1 year ago
Awesome!!!
FPYCRUGBY 1 year ago
How did u get the throttle to work??
thecomputerbuilder 1 year ago
Your exhaust pipe has too sharp of a bend at the flange, try going to arc racing.com they have an exhaust system that will work for ur bike.
TheDilligaf289 1 year ago
lol bike cost about 100$ right ? then the weed waker cost like what 90$? + 10$ parts ":P ?
emlolcast 1 year ago
it sounds like shit
54DUNLOP 1 year ago
how did u mount the sprocket to the rim and did u drill the frame to bolt the motor to it
hollon1234 1 year ago
Comment removed
hollon1234 1 year ago
Comment removed
chillay18 1 year ago
cool chopper bike
cashonlylaketahoe 1 year ago
cool chopper bike
cashonlylaketahoe 1 year ago
cool chopper bike
cashonlylaketahoe 1 year ago
i will totally buy that from u
alekscooool 1 year ago
damn rich kids!!!
aassdd85 1 year ago 42
@aassdd85 .... funny thing is it only cost me $200. and a lot of work.
thulination 1 year ago 61
@thulination good job since when is somebody rich when theyre buying a harber freight engine you can get em for $100 lol :)
cambigfoot88 1 year ago
Comment removed
evanmcorleytv 8 months ago
@thulination ur lucky u have 200$
1972paintballbeast 7 months ago
@thulination u got nice grass
lTriplethreatl 6 months ago
@aassdd85 haha its not expensive, if your jelous, you need to hate on the damn smart kyds :D they have bike for 40 dollars at the pawn shop =]
NASTYTHEBOY 1 year ago
@aassdd85 Damn jealous bastards!!!
DrPilotRedC 1 year ago
@aassdd85 Damn haters!!!
RifatTV 1 year ago
@aassdd85 whats wrong with being rich hobo?
Hogasofa 1 year ago
@aassdd85 i got one of those motors from harbor freight for 99$ and the bike is cheep .i put that motor on a kids mini 70 cc 4 wheeler now its a 196 hehe!!!
theonethatgoofs 10 months ago
@aassdd85 rich kids arnt smart enough to build that
alfletch93 8 months ago
@aassdd85 you are an idiot a rich kid would have went out and bought the most expensive name brand motorcycle his parents would have let him on the other hand you have a child im sure in the upper middle class saving money but using his brain to make something a lot more intriguing and self satisfactory but alas we have idiots like you with random idiotic comments it never fails us good old you tube
APBTisBeast 6 months ago
Cool!! That engine looks a little too close to your leg though, but very good job on the custom fabrication.
TRXfiend 1 year ago
nice bike! can u tell me whats you clutch, your chain and your sprokect pls?
XxMusclecarsxX 1 year ago
You should have put a pluming elbow steel fitting on the exit part on your engine so the exhaust can shoot out much easier. you lose power the way you have it now. or go to home depot and get some electrical tubing and just use the pipe bender they have there and just bend the pipe so you don't have the trouble of spending almost 80 bucks on one when you can just do one simple bend there. or just spend 15 to 20 dollars on a big size pipe bender at a swap meet. That will work
honeybunchickens 1 year ago
Sweet build!!!
honeybunchickens 1 year ago
how much did this all cost and where did you buy this stuff?
chocotaco729 1 year ago
nice love the tensioner but get new tank check out mine its quite simlarr well sort of
loweylegend 1 year ago
Those are great engines. I still can't believe how cheap they are; even with the 2 year warranty.
livesteamfan1 1 year ago
FAG.....southpark
Wher3Wuzi 1 year ago
Nice! Some great ingenuity!
firebellycycles 1 year ago
HOLY SHIT 196cc DAMN FRIGGIN BIG MOTOR!
LikeAVideo 1 year ago
take off the blue pulstart housing and paint it red or black then put it back on it throws off the whole bike , other than that nice job , check out my minibike vids
AxSxKxONE 1 year ago
did you weld the clutch insted of getting the right bolt?
davidmuel11 1 year ago
how many teeth on your rear sprocket
91redneckproductions 1 year ago
cool...but! i can see you are using a motored bicycle gas tank...so im guessing you used to have the kit....what you should use for the chain is #40/41 pitch chain cause it wont break like the stuff from the kit. And second, you could have used the rear brakes by routing the chain under the rear arm, and you could of used the throttle from the kit as well, but still..really awesome bike
mechanicojoe 1 year ago
actually i just bought the tank off of ebay and the chain is very strong. no problems there. you are right about the brakes though.
thulination