Ok I'll upload a video tomorrow of my stereo. Without a switch or the parking brake on. And I have the vm9312hd. And I hooked my friends up. Who has the same as yours with the SD card slot. All you have to do is place the pink wire on the black ground. I admit you switch is cool. And it looks cool with all the other switches in your car. But is not needed.
You know the pink wire that your suppose to connect to the parking brake. If you will simply connect that wire to the black ground when connecting the head unit. You don't have to hook up a special switch or even go to the system settings. Good video tho.
@FCMeade This particular model requires a sequence to bypass. I even put a nice little annotation that says "The switch is grounded" to show I still got the blue screen even with the parking brake wire grounded, but unfortunately I keep getting comments like yours. If anyone reads this please click thumbs up so others can read it. thanks
Thank you for the tip on how to bypass the parking break. It worked like a charm, only took me a few seconds to fix mine (Model VM9223) which worked as well.
@juniortoda is there anyway you could make a video on how to wire everything... also do you think i need a bigger power inverter than 250w since its a xbox 360? jw... thanks again bro...
@xXMERK3158Xx I got rid of the video camera I had but if you give me your email I whip up and send you a diagram. The first 360's to come out had 203 watt power supply's and the newer one's kept using less and less wattage so 250 is sufficient. Just make sure it's 250 watts constant power, not peak power.
Awesome video, and thanks for the help. You should check out seller radonich1 on eBay or my videos for parking brake bypasses that work with all newer Pioneer, JVC, Sony, Clarion, and Eclipse radios.
@juniortoda no it didn't have a sequence... but about the 360 what kind of power inverter and where to get it and how do i hook it up? thanks for all the help so far...
@xXMERK3158Xx Well if there's no sequence I don't know why you didn't just ground it. As for what power inverter, I'd go with at least a 250 watt inverter. It has 2 wires, one goes to the positive, the other one to the negative, but I'd use a relay to break continuity between the negative or else you'll drain your battery even if the switch is off on the inverter.
@juniortoda got the stereo in and put in the rocker switch and it works perfect... Thanks for the help and video... Next project is putting my xbox 360 in... Don't know how to go about with it but I'll figure it out... Thanks again man!
@xXMERK3158Xx No problem. Does your head unit have a sequence to bypass the screen? If you need help when installing your 360 feel free to hit me up. The main thing your going to need is a power inverter.
@juniortoda do i take my cars brake wire with my aftermarket wire harness and connect that to one side of the toggle switch and take another wire to the other side and ground that?
@xXMERK3158Xx you should have a parking brake wire(usually pink) coming from the harness. try gounding it to bypass, if that doesn't work connect it to a switch and then connect a short wire from the other side of the switch to ground. chances are there is a sequence to bypass the screen. check your manual
so Im wondering if that jensen unit is worth the buy. I saw that it was installed in your nice ride, so to be installed in there I would think it was. its just that its a jensen and I thought jensen was a cheap brand. so is it worth it, because I want to buy one if it is.
@keer1lc one switches is for the power inverter, and the one on the dashboard has 2 wires that go to the xbox and are soldered inside the xbox. so basically I have 2 power buttons
good god you just saved my ass. I was about to take apart the dash tomorrow looking for where to connect the brake wire so I could watch movies. Works great on Jensen VM9224
this also works for the VM9224 you should add that in your title because this is the only video and help for the VM9224 on the internet. thanks for the video i been tryna bypass this bullshit for 2 days and i dont want to use a toggle switch or that other shit..
I don't get it... Why don't you just ground the parking brake wire to begin with? I did this on my car stereo/dvd player and played movies while driving all the time.
@thetreman wow, this is getting old. If you paid attention you'd notice the wire is grounded and the blue screen still appears. This deck requires a sequence to bypass.
@resa23np When did you buy yours? I got mine 3 years ago and it came with the Medialink 3 and it doesn't play mpeg1 videos. The decks available now probably have newer firmware and they come with the Medialink 4 which can play videos.
@juniortoda i bought it on september of 2009 and yes it came with media link 4 but supposely on the manual it says that you cant reproduce videos or images from an sd or usb. in my case i reproduce videos from an sd. i will make a video later on and show you how it looks. you should try doing the process that i did of converting videos and put the mpeg video on the sd
My boss touchscreen needed the same and I hooked it to a switch and when on the video came on when off no show.many ways to out smart things these days!and helpful video since im about to get one just like yours.thank you
@MAN1AK213 if you paid attention to the video, you'd notice when the xbox is turned on the wire is initially grounded, yet I still get the blue screen. I even added an annotation for people like you stating "The switch is grounded" so people would stop saying "hey man, why don't you just ground the pink wire". It doesn't work, that was the first thing I tried when I got my deck.
hey man i yesterday installed these jensen unit! but i have some questions maybe you could help me i want to play youtube videos but what program do you use to convert them and what program do you use to burn them and in what mode dvd mode or normal cd mode? can usb or sd card play image and video and in what format or resolution?
@resa23np Total Video Converter is a good program to use. You can convert them to Divx and burn them to a blank DVD, just make a Data disk. There's a lot of programs you can use to burn them. Nero a good one. You can't play videos from usb or sd, only music and photos.
@dubsidedude2010 I got mine 3 years ago and it doesn't. The decks available now have been upgraded and come with the Medialink4. Mine came with the Medialink3.
hey man i finally got a way to reproduce videos from an sd and usb first i download the videos from youtube using keepvid on mp4 format with 480 x 360 resolution important has to be with these resolution, then you have to transform with the ojosoft total video converter 2.7.2 to avi format in (archos 404/405-DIVX4, 2500 kbps, 29.97fps, 320x 240), after you have converted the video you have to convert the avi video to mpeg in (MPEG1 1150 kbps, 29.97fps, original frame size: Audio 224kbs)
for decks that dont have that override in the firmware that you showed you can just put the ebrake ground wire on a relay when the radio comes on put it on the amp output lead which will provide the delay
@trextegra It's not a delay, it's a sequence. The wire is initially grounded, has to be ungrounded for 2-3 seconds, then re-grounded in order to bypass the blue screen. Depending on the deck you have, you might be able to get away with just grounding the wire directly to the body of the car.
hey! how do you ground the wire? i got mine connect to my E=break.... can you rec. and show us how to do it please? thankz bro. by the way, like the car... i got a 04 monte ss supercharged...
I'm upgrading my setup at the moment so almost everything's out of the car. I might do one when everything's back in. The new setup is going to include a 360, a carputer, and a 12" touchscreen.
It should work. Make sure it is a Jensen and it looks the same as the original that came with your deck. I can use my remote on my brothers VM9022 and his remote works on mine.
find someone with a Jensen and use their remote. it doesn't have to be the exact model as yours, as long as it has the same menu it should work. you only have to do this one time and your set
it also works if you just connect the pink wire to the ground. thats how mine is. i just hope i dont burn anything up that was. if i am in danger of damaging my deck PLEASE let me know lol. cus i just got it!
thats pretty nice man.. hows the sound quality of that jensen? thats not bad for the price @ all. i see some on ebay. i want a indash hella bad lol.. what are some brands to stay away from?
sound quality is good but it depends on your speaker setup. I would recommend an amp to power your speakers. as far as brands to stay away from, I'm not sure bro
the head unit has a pink parking brake wire that I hooked to one side of the switch, the other side was connected to ground. YOU DON'T NEED A SWITCH IF YOUR USING THE CODE
ok.. cuz im getting this same one for christmas and i wanted to no if i needed to hook like ground it then put the code in then i could unhook it or i could just putt he code in as soon as i hook the radio up without hookin up the brake wire
well first you have to mod your Xbox (either hard modding it or soft modding it) then you can copy whatever files you want to it using your pc and a crossover cable. do a search there are plenty of tutorials online
go to xboxscene.c o m and click on tutorials. your going to need an original copy (not a platinum hits version) of one of the following games: 007 Agent Under Fire, Mech Assault or Splinter Cell
u touch da screen and da equilizer pops up and u turn it all the way up..and if u dnt have subwoofers u turn off da subwoofer mode dat should do da job
now do u have the ground wire grounded to the parking brake or just somewhere else bc i saw a video were someone did that thing with the 543210 like u did but the didn't have any switches and had the ground wire on the parking brake and it worked fin, just wondering, plz reply
no, the parking brake wire is not connected to anything anymore. I unhooked it since you don't need to have it connected using the code shown in the video.
yes you can, BUT you need the Jlink cable, also you cant go through the videos are anything through the headunit. you will need to do it through the ipod
tiburcio48 is right its grounded all the time so you dont have to hooke it up to a switch.......i did it to my friends jensen it worked just fine and played dvds,xbox,and ps3
no, that doesn't work. watch the video, when I turn on the xbox the wire is grounded and I get the blue screen. I unground the wire for two seconds, and then reground. please do your research before posting incorrect info on something you've never tested yourself. your method might work for other decks and older Jensen models but not on this one.
all you people are so slow you dont have to do all this work just to see your DVD the easier way is to connect the pink wire with the nigative black wire then it will work you dont need no switch
first of all the purpose of the video is to not use a switch, second your method wouldn't work because the pink wire has to be ungrounded for 2 seconds, and then regrounded. can you tell me exactly how you would do that if you connected the pink wire directly to ground?
hey man will it work with an in dash head unit and its a jensen vm9224bt
FamousTeK 3 weeks ago
@FamousTeK I think so
juniortoda 3 weeks ago
thanks bro it really helpme
dinahivan 1 month ago
That's cazy, i was just playin that shit with the wife last night lol
chrispriveco 1 month ago
gonna test this on the vm9314 in a lil bit when i install it if anyone wants to know the outcome message me here and ill reply
hippa2dahoppa2 2 months ago
sweet im about to buy a new radio, was looking on how to make a switch but hopefully i can just do this instead and bypass it without installing one!
hippa2dahoppa2 2 months ago
so why do u have the swich then?
jfisher926 3 months ago
@jfisher926 I had the switch before I knew the code
juniortoda 3 months ago
Ok I'll upload a video tomorrow of my stereo. Without a switch or the parking brake on. And I have the vm9312hd. And I hooked my friends up. Who has the same as yours with the SD card slot. All you have to do is place the pink wire on the black ground. I admit you switch is cool. And it looks cool with all the other switches in your car. But is not needed.
FCMeade 3 months ago
@FCMeade nowhere in the video or the description does it say this is for the HD models. this video was made over 3 years ago.
juniortoda 3 months ago
You know the pink wire that your suppose to connect to the parking brake. If you will simply connect that wire to the black ground when connecting the head unit. You don't have to hook up a special switch or even go to the system settings. Good video tho.
FCMeade 3 months ago
@FCMeade This particular model requires a sequence to bypass. I even put a nice little annotation that says "The switch is grounded" to show I still got the blue screen even with the parking brake wire grounded, but unfortunately I keep getting comments like yours. If anyone reads this please click thumbs up so others can read it. thanks
juniortoda 3 months ago 7
Thank you for the tip on how to bypass the parking break. It worked like a charm, only took me a few seconds to fix mine (Model VM9223) which worked as well.
:-):-)
lic2laf 4 months ago
Put up a video of your car
georgewrigley96 4 months ago
great vid man worked perfect on my jensen UV-10
whitewolf0890 5 months ago
@juniortoda i sent you my email...
xXMERK3158Xx 6 months ago
@juniortoda is there anyway you could make a video on how to wire everything... also do you think i need a bigger power inverter than 250w since its a xbox 360? jw... thanks again bro...
xXMERK3158Xx 6 months ago
@xXMERK3158Xx I got rid of the video camera I had but if you give me your email I whip up and send you a diagram. The first 360's to come out had 203 watt power supply's and the newer one's kept using less and less wattage so 250 is sufficient. Just make sure it's 250 watts constant power, not peak power.
juniortoda 6 months ago
Awesome video, and thanks for the help. You should check out seller radonich1 on eBay or my videos for parking brake bypasses that work with all newer Pioneer, JVC, Sony, Clarion, and Eclipse radios.
MicroBypass 6 months ago
@juniortoda no it didn't have a sequence... but about the 360 what kind of power inverter and where to get it and how do i hook it up? thanks for all the help so far...
xXMERK3158Xx 6 months ago
@xXMERK3158Xx Well if there's no sequence I don't know why you didn't just ground it. As for what power inverter, I'd go with at least a 250 watt inverter. It has 2 wires, one goes to the positive, the other one to the negative, but I'd use a relay to break continuity between the negative or else you'll drain your battery even if the switch is off on the inverter.
juniortoda 6 months ago
@juniortoda got the stereo in and put in the rocker switch and it works perfect... Thanks for the help and video... Next project is putting my xbox 360 in... Don't know how to go about with it but I'll figure it out... Thanks again man!
xXMERK3158Xx 6 months ago
@xXMERK3158Xx No problem. Does your head unit have a sequence to bypass the screen? If you need help when installing your 360 feel free to hit me up. The main thing your going to need is a power inverter.
juniortoda 6 months ago
@juniortoda do i take my cars brake wire with my aftermarket wire harness and connect that to one side of the toggle switch and take another wire to the other side and ground that?
xXMERK3158Xx 6 months ago
@xXMERK3158Xx just the wire parking brake wire from your head unit goes to the switch
juniortoda 6 months ago
@juniortoda thanks... I'm putting it in this week I'll let you know how it works out...
xXMERK3158Xx 6 months ago
@juniortoda ok thanks man... But could I just use a toggle switch to bypass it that way? Also how do you hook up the switch?
xXMERK3158Xx 6 months ago
@xXMERK3158Xx you should have a parking brake wire(usually pink) coming from the harness. try gounding it to bypass, if that doesn't work connect it to a switch and then connect a short wire from the other side of the switch to ground. chances are there is a sequence to bypass the screen. check your manual
juniortoda 6 months ago
i have the jensen vm9224bt and it doesnt come with a remote what should i do?
xXMERK3158Xx 7 months ago
@xXMERK3158Xx I think they changed the menu system for that model so the bypass would probably be different as well.
juniortoda 7 months ago
You should have a video that shows o. How u hooked ur xbox 2 your car I'm planin 2 do something similar but idk how
valadezjose47 7 months ago
@valadezjose47 if you check out my carputer video you can get an idea of how I had it hooked up
juniortoda 7 months ago
Good looking out dude
Rod1011000 8 months ago
sick car
mrdgiant 8 months ago
lovin the CRX!!
BigRed1134 8 months ago
@BigRed1134 thanks, but it's a Prelude
juniortoda 8 months ago 4
Check out my system i just installed it
SergentWoody1988 10 months ago
check out my cd player is awsome
SergentWoody1988 10 months ago
this works with the phase linear uv9 thank you!!!!!
barroomhero0876 11 months ago
remote bypass didnt work :-( so im just grounding it
fingerandskateboard 1 year ago
so Im wondering if that jensen unit is worth the buy. I saw that it was installed in your nice ride, so to be installed in there I would think it was. its just that its a jensen and I thought jensen was a cheap brand. so is it worth it, because I want to buy one if it is.
MrMexicanaztec 1 year ago
@MrMexicanaztec it's good for if your buying your first deck
juniortoda 11 months ago
THANKS
MrCaddillacMan 1 year ago
Comment removed
frstr8 1 year ago
Dude! You are the man! Just installed a Jensen UV10 in my buddies car and this worked perfect! You Rock Homie!
frstr8 1 year ago
WTF u playin super Mario 3 for nintendo on xbox?
iPhonestunna 1 year ago
Anybody find this to work for the Jensen VM9324? (it's basically the updated version of the 9224 which does work).
jdtoothnail 1 year ago
Comment removed
ccjerm361 1 year ago
will this definately work on the jensen vm9412??
ccjerm361 1 year ago
@MrCaddillacMan if you have the same menu as in the video then it should work
juniortoda 1 year ago
Bro how baked are u?
900bigd 1 year ago
lol its the same like Audiovox VME 9309 TS
BThein90 1 year ago
My screen is just blank but you still can change station and things on the touchscreen but i can't see. Do you know how to fix this?
mrlooter2 1 year ago
how do u put the switches in with the xbox to turn it on and off
keer1lc 1 year ago
@keer1lc one switches is for the power inverter, and the one on the dashboard has 2 wires that go to the xbox and are soldered inside the xbox. so basically I have 2 power buttons
juniortoda 1 year ago
just ground it you dumb ass! grounding it will by pass it duh this shit is so old......
Trance4You69 1 year ago
@Trance4You69 wow noob, go educate yourself before posting ignorant comments like this
juniortoda 1 year ago
good god you just saved my ass. I was about to take apart the dash tomorrow looking for where to connect the brake wire so I could watch movies. Works great on Jensen VM9224
mattdw1715 1 year ago
how do you bypass it on a jensen vm9214?
mackie0116 1 year ago
@mackie0116 not sure, try grounding the pink wire
juniortoda 1 year ago
this also works for the VM9224 you should add that in your title because this is the only video and help for the VM9224 on the internet. thanks for the video i been tryna bypass this bullshit for 2 days and i dont want to use a toggle switch or that other shit..
97crownvicNJ 1 year ago
I don't get it... Why don't you just ground the parking brake wire to begin with? I did this on my car stereo/dvd player and played movies while driving all the time.
thetreman 1 year ago
@thetreman wow, this is getting old. If you paid attention you'd notice the wire is grounded and the blue screen still appears. This deck requires a sequence to bypass.
juniortoda 1 year ago
vm9512 only not the hd model
resa23np 1 year ago
@resa23np When did you buy yours? I got mine 3 years ago and it came with the Medialink 3 and it doesn't play mpeg1 videos. The decks available now probably have newer firmware and they come with the Medialink 4 which can play videos.
juniortoda 1 year ago
@juniortoda i bought it on september of 2009 and yes it came with media link 4 but supposely on the manual it says that you cant reproduce videos or images from an sd or usb. in my case i reproduce videos from an sd. i will make a video later on and show you how it looks. you should try doing the process that i did of converting videos and put the mpeg video on the sd
resa23np 1 year ago
@resa23np I tried, doesn't work. It doesn't matter, I'm installing a car PC so all my files will play off my hard drive.
juniortoda 1 year ago
hey man i really need help my screen is black but the stereo turns on and there is a stuck cd in it could you help
Mr102109 1 year ago
i have a dual, and it need a code...i bypass it and it need a code to put it for it to active....HELP
keithahfua 1 year ago
@keithahfua need more info. what model do you have?
juniortoda 1 year ago
My boss touchscreen needed the same and I hooked it to a switch and when on the video came on when off no show.many ways to out smart things these days!and helpful video since im about to get one just like yours.thank you
jakeboise1993 1 year ago
@MAN1AK213 if you paid attention to the video, you'd notice when the xbox is turned on the wire is initially grounded, yet I still get the blue screen. I even added an annotation for people like you stating "The switch is grounded" so people would stop saying "hey man, why don't you just ground the pink wire". It doesn't work, that was the first thing I tried when I got my deck.
juniortoda 1 year ago
yo wat up! i was wondering if u knew how to do it without the control remote, i lost mine, thx
chochilitico 1 year ago
@chochilitico don't think it's possible
juniortoda 1 year ago
hey man i yesterday installed these jensen unit! but i have some questions maybe you could help me i want to play youtube videos but what program do you use to convert them and what program do you use to burn them and in what mode dvd mode or normal cd mode? can usb or sd card play image and video and in what format or resolution?
resa23np 1 year ago
@resa23np Total Video Converter is a good program to use. You can convert them to Divx and burn them to a blank DVD, just make a Data disk. There's a lot of programs you can use to burn them. Nero a good one. You can't play videos from usb or sd, only music and photos.
juniortoda 1 year ago
@juniortoda i have this same deck and yes you can play video from usb and sd cards
dubsidedude2010 1 year ago
@dubsidedude2010 I got mine 3 years ago and it doesn't. The decks available now have been upgraded and come with the Medialink4. Mine came with the Medialink3.
juniortoda 1 year ago
@juniortoda oh ok gotcha
sorry for the mixup
what type of file do the videos have to be cuz it doesnt seem liek i can ever get any videos i put on usb/sd/ or cd to play
dubsidedude2010 1 year ago
@dubsidedude2010 try burning to dvd-r
juniortoda 1 year ago
hey man i finally got a way to reproduce videos from an sd and usb first i download the videos from youtube using keepvid on mp4 format with 480 x 360 resolution important has to be with these resolution, then you have to transform with the ojosoft total video converter 2.7.2 to avi format in (archos 404/405-DIVX4, 2500 kbps, 29.97fps, 320x 240), after you have converted the video you have to convert the avi video to mpeg in (MPEG1 1150 kbps, 29.97fps, original frame size: Audio 224kbs)
resa23np 1 year ago
hey bro great video, tried it right now with the 543210 and works lovely. thanks
harelyrider 1 year ago
How loud is your head unit fan noise? Is it noticeable?
easaly 1 year ago
@easaly It's been a while since I've had it in my car, but as far as I can remember, it's wasn't noticeably loud.
juniortoda 1 year ago
great video bro. is there a code for the vm9414 or do I have to do it some other way? thanks again.
blindside1085 1 year ago
@blindside1085 I'm not sure about this model. If anyone knows please help this guy out.
juniortoda 1 year ago
hey man how did u put the x box in the car. how u get the power to the x box ?
MrRobertoesparza 1 year ago
@MrRobertoesparza I used a power inverter.
juniortoda 1 year ago
for decks that dont have that override in the firmware that you showed you can just put the ebrake ground wire on a relay when the radio comes on put it on the amp output lead which will provide the delay
trextegra 1 year ago
@trextegra It's not a delay, it's a sequence. The wire is initially grounded, has to be ungrounded for 2-3 seconds, then re-grounded in order to bypass the blue screen. Depending on the deck you have, you might be able to get away with just grounding the wire directly to the body of the car.
juniortoda 1 year ago
Do i still got to ground the parking break or can i jus put in the code and ill be good?
jjones3144 1 year ago
@jjones3144 just the code
juniortoda 1 year ago
one problem, i don't have a remote...lmaoooo
keithahfua 1 year ago
what do you mean wen using the code?....
keithahfua 1 year ago
@keithahfua the code in the video
juniortoda 1 year ago
hey! how do you ground the wire? i got mine connect to my E=break.... can you rec. and show us how to do it please? thankz bro. by the way, like the car... i got a 04 monte ss supercharged...
keithahfua 1 year ago
@keithahfua there's no need to ground the parking brake wire when using the code
juniortoda 1 year ago
@shawnnyman what model is your jensen, and did you buy the head unit used?
juniortoda 1 year ago
@juniortoda as far as i know its not used. i bought it off ebay. its the UV8. i didnt even think of the different models. sorry about that man
shawnnyman 1 year ago
@shawnnyman no worries
juniortoda 1 year ago
Just picked up this HU tonight. Thanks for the video, definitely gonna be using that secret menu option.
KeithSEMEN 1 year ago
i noticed how your car is high tech can u make a your of your car and how u did everything from switch's to wiring
ruger50 1 year ago
I'm upgrading my setup at the moment so almost everything's out of the car. I might do one when everything's back in. The new setup is going to include a 360, a carputer, and a 12" touchscreen.
juniortoda 1 year ago
@juniortoda ight ima be on the look out for that video so im a sub to your page if you sub to mines
ruger50 1 year ago
ok an RCA splitter and connected to the sub preamp output?
resa23np 1 year ago
@naireland Mine is grounded directly to the body and works great!!!
kbaldeo 1 year ago
according to a few sources online, this will also work on the VM9313 which I will be installing soon and can post back with results if anyone cares
drimmie 2 years ago
would u recomand this 7 inch for playing games in the car i want to get a 15 inch
monitor then ill still have a stock raideo
but u can get a nice deck for $100
hacker1462 2 years ago
Go with the 15 inch for games. I'm upgrading to a 12 inch touchscreen for my carputer and 360.
juniortoda 2 years ago
i lost my old remote wuld new1 work
CAPO100G 2 years ago
It should work. Make sure it is a Jensen and it looks the same as the original that came with your deck. I can use my remote on my brothers VM9022 and his remote works on mine.
juniortoda 2 years ago
What If you don't have the remote then what?
mswilson225 2 years ago
find someone with a Jensen and use their remote. it doesn't have to be the exact model as yours, as long as it has the same menu it should work. you only have to do this one time and your set
juniortoda 2 years ago
it also works if you just connect the pink wire to the ground. thats how mine is. i just hope i dont burn anything up that was. if i am in danger of damaging my deck PLEASE let me know lol. cus i just got it!
shawnnyman 2 years ago
that doesn't work, watch the video the wire is grounded and I still get the blue screen.....why don't people pay attention?
juniortoda 2 years ago
thats pretty nice man.. hows the sound quality of that jensen? thats not bad for the price @ all. i see some on ebay. i want a indash hella bad lol.. what are some brands to stay away from?
tyler238 2 years ago
sound quality is good but it depends on your speaker setup. I would recommend an amp to power your speakers. as far as brands to stay away from, I'm not sure bro
juniortoda 2 years ago
does it have a usb port?
yungpyrogsr 2 years ago
yes, it's on the external MediaLink box
juniortoda 2 years ago
howd u wire ur xbox to turn on by switch?
dubsidedude2010 2 years ago
I soldered two long wires to the powerboard inside the xbox and connected the other ends to a momentary switch
juniortoda 2 years ago
@dubsidedude2010
dude not the xbox.
only the securitysystem
BThein90 2 years ago
wut?
dubsidedude2010 2 years ago
he has a moded x box. I had this too. love it until the three ring came on
khmerlbckid 2 years ago
What kind of wire did u use to run the switch? Or how did u do it
patron09nr 2 years ago
the head unit has a pink parking brake wire that I hooked to one side of the switch, the other side was connected to ground. YOU DON'T NEED A SWITCH IF YOUR USING THE CODE
juniortoda 2 years ago
how did you get your xbox to do that?
hotopanda450r 2 years ago
I modded it
juniortoda 2 years ago
does the pink wire/the parking brake wire have to be hooked up to anything for this code to work or can it jsut not be hooked up at all to anything?
dubsidedude2010 2 years ago
it doesn't need to be hooked up to anything with the code
juniortoda 2 years ago
ok.. cuz im getting this same one for christmas and i wanted to no if i needed to hook like ground it then put the code in then i could unhook it or i could just putt he code in as soon as i hook the radio up without hookin up the brake wire
dubsidedude2010 2 years ago
just punch in the code. no wire required
juniortoda 2 years ago
THANKS! your vid really helped!
MerCooties 2 years ago
thanx man for the jensen vm9213 it realy works
20 stars for you
hurjeidoru 2 years ago
just cut the wire and attatch 2 the cage simplez
lukejarmain 2 years ago
doesn't work, the wire is grounded and I still get blue screen. you should pay more attention
juniortoda 2 years ago
it works for the uv7i?
alexkitto2 2 years ago
Code worked on my uv10
triggaOne2000 2 years ago
Good looks on the knowledge.
triggaOne2000 2 years ago
Thanks for that bro!!!
fishntx 2 years ago
yo thats hottt...how did you get that fce ultra x on there?
jdawgest1983 2 years ago
well first you have to mod your Xbox (either hard modding it or soft modding it) then you can copy whatever files you want to it using your pc and a crossover cable. do a search there are plenty of tutorials online
juniortoda 2 years ago
please send me the link to the tutorial
lickthebubble 2 years ago
go to xboxscene.c o m and click on tutorials. your going to need an original copy (not a platinum hits version) of one of the following games: 007 Agent Under Fire, Mech Assault or Splinter Cell
juniortoda 2 years ago
thank bro it works for the jensen uv9 thanks
jonathanzane 2 years ago
3rd gen prelude?
shooterC45 2 years ago
yeah
juniortoda 2 years ago
ay how do u boost the bass on these dvd players
SmileyxXx3 2 years ago
u touch da screen and da equilizer pops up and u turn it all the way up..and if u dnt have subwoofers u turn off da subwoofer mode dat should do da job
blazinhood14 2 years ago
Thanks for the tip!!
N130GV2 2 years ago
is this a good stereo to buy or does it fuk up alot?..
chuy22793 2 years ago
I've had it for over a year now and haven't had any problems with it.
juniortoda 2 years ago
i just did it for my vm9312hd and it works perfectly thanks for the info
killapop74 3 years ago
now do u have the ground wire grounded to the parking brake or just somewhere else bc i saw a video were someone did that thing with the 543210 like u did but the didn't have any switches and had the ground wire on the parking brake and it worked fin, just wondering, plz reply
LilSureShot45 3 years ago
no, the parking brake wire is not connected to anything anymore. I unhooked it since you don't need to have it connected using the code shown in the video.
juniortoda 3 years ago
THANK YOU SO MUCH! 4 THE TIP,was usefull
sveyder 3 years ago
awesome video... great info...but can you play ipod videos from your ipod...and view them through the headunit??thanks
Mvino40 3 years ago
I'm not sure, I don't have an ipod to test this out, but I think you can.
If anybody has tried this please post if it works or not.
juniortoda 3 years ago
yes you can, BUT you need the Jlink cable, also you cant go through the videos are anything through the headunit. you will need to do it through the ipod
DeathJr2006 3 years ago
Works perfect on the Jensen VM9312HD however when you go to the setup menu you enter 543210 under the general tab not under language
CV742 3 years ago
just wondering if the Dual XDVD8181 has a master code so i dont have to install a toggel switch? and if it does how do you do it
mattbosmith 3 years ago
First you have to ground the E-Brake wire. You can tap into the ground wire for the stereo.
-Insert a DVD
-Let it play until you hear sound
-Press STOP twice on remote
-Enter 26604
-Press ENTER
juniortoda 3 years ago
thanks for the info
mattbosmith 3 years ago
Worked on the 9412 like a charm, thanks brotha!
ANDRES373 3 years ago
tiburcio48 is right its grounded all the time so you dont have to hooke it up to a switch.......i did it to my friends jensen it worked just fine and played dvds,xbox,and ps3
brian371987 3 years ago
no, that doesn't work. watch the video, when I turn on the xbox the wire is grounded and I get the blue screen. I unground the wire for two seconds, and then reground. please do your research before posting incorrect info on something you've never tested yourself. your method might work for other decks and older Jensen models but not on this one.
juniortoda 3 years ago
all you people are so slow you dont have to do all this work just to see your DVD the easier way is to connect the pink wire with the nigative black wire then it will work you dont need no switch
tiburcio48 3 years ago
first of all the purpose of the video is to not use a switch, second your method wouldn't work because the pink wire has to be ungrounded for 2 seconds, and then regrounded. can you tell me exactly how you would do that if you connected the pink wire directly to ground?
juniortoda 3 years ago
good info guys thanks!
Ymesss 3 years ago
this didnt work for my VM9312, what else can i do?
gobearsgo7 3 years ago
did you highlight "Language" under the setup menu?
juniortoda 3 years ago
never mind, i wasnt holding the 0 button long enough, thanks alot this worked perfectly
gobearsgo7 3 years ago
just did this on my vm9212n, worked great thx
taimoor006 3 years ago
how did u hook up you power converter like that
brighthouse2007 3 years ago