G&P WOC GBBR Shooting test

[pilerheritage]

I have a two real ones, but for some reason I want an airsoft version too. lol are these good for gaming? hows the reliability?

[airsoftandmilitary]

Total price estimate?

[xxxkickassxxx2]

what rail system is that?

[jones21290]

Nice set up.

[cheeseninjawilliam]

Do you have an FPS figure for that thing? Is it under 350?

[ilovesdeathraceand]

i cant find this anywhere can you link it for me please? and how much?

[driftinsti]

@ilovesdeathraceand The reason why you can't find this anywhere is because i built and tuned this gun piece by piece.

[ilovesdeathraceand]

@driftinsti yes i got that from the built from scratch part perhaps my comment wasnt clear in your previous video what i meant was where can i find a G&P woc

[ilovesdeathraceand]

@ilovesdeathraceand sorry if i sounded like a dick lol

[gamewiz0070]

ur camera moves acordingly? thats amazing. i want one! MOM!!! WERES UR VISA lol

[driftinsti]

@gamewiz0070 its just the digital stabilizer function lol

[gamewiz0070]

@driftinsti lol it just amazes me lol

[Kronesefur]

Great setup man! I love it! have you done an accuracy test video yet? I can't find one anywhere!

[airsoftdude9er]

were did you get your stock if any one knows in the comments tell me

[S34Ninc]

does the agm magazine leak at all, is there any problems with it?

[DenverSabre]

how do you attach the free float type rails?



[AirsoftGeekDotCom]

You have the digital stabilizer on on your camera. That is why you cant see the gun kick.

[driftinsti]

@AirsoftGeekDotCom Thanks for the tip! 

[1972paintballbeast]

@driftinsti holly crap dude that gun looks bad ass i love the color scheme on the rail covers

[cobrafriends]

i hear your asian parents

[driftinsti]

@cobrafriends yea, don't wanna piss them off, they'll kung fu my ass. lol

[cobrafriends]

@driftinsti lol idk why my parents hate airsoft, how did you managed to convince ur asian parents? pm me (::

[0905825]

hey great vid your video made me purchase the kit

[driftinsti]

@0905825 thanks

[Mr589742316]

@driftinsti do u have any recommendations on where to guy airsoft guns in toronto

[cobrafriends]

@0905825 you should know that that kit is not this one, thats the WOC-X, its made of shitty internals and will break after 1000-3000 rounds

[FluffyBoy32]

Could you do a video testing the recoil by doing a bounce test? Take the gun, put it with the stock on a table and pull the trigger in full auto and also semi and see how high it bounces. That'll give a pretty good idea of the recoil...

[TheSlurpeeBoy]

Quick question, I have a friend who is looking into buying one of those G&P WOC kits from evike, and we were wondering (I think it's true) if G&P WOC accept WA parts.

[driftinsti]

@TheSlurpeeBoy Yes they do they are identical.

[sally3750]

what part is that in 1:52 ???...above the trigger (ur finger just put on it)....

[TheBeta9]

@sally3750 That's an extended bolt release so he doesn't have to use his other hand to hit it on the other side of the gun.

[thanez86]

@sally3750 It's called an "anti rotation pin set", it's basically a fastening lock for the pins that hold the trigger/sear assembly in place so the recoil and shaking can't shake the assembly loose. I don't think there's any reason to get it unless it's for cosmetic reasons. I've not had any problems with my WOC, and i've heard that the WEs and WAs are also tight as fuk.

[sally3750]

@thanez86 oh i see...thanks~!

[Smennyboy]

Where did you get the MOE stock ? I really want one of those on my WOC.

[driftinsti]

@Smennyboy its not a MOE stock. Its a CTR. You can find it at any airsoft store online or local.

[Smennyboy]

@driftinsti Oh, my bad then. Non the less it looks really good. I'll check out redwolf, maybe they have it. Does it fit well on the original buffer tube ? Thanks for the reply by the way, didn't really expect that.

[Athorain]

Hey, I built my own and due to a lack of mags I can use with it, I went and bought a king arms bolt as well as 3 magazines. But I am having trouble. 1 mag leaks, and on another the rubber nozzle on the magazine comes out of the magazine everytime I fire the gun. any ideas as to why???

[HateWhatISee]

Do you still have it?

[bmxkid1291997]

Yo dont ever dry fire it breaks all the inners

[driftinsti]

@bmxkid1291997 er no......

[bmxkid1291997]

@driftinsti yea it will dry fireing breaks the inners because of the lack of lub and its also makes the gears just smack aganist eachother and grind down just trust me on this you have a relly good gun i dont wount to see it fuck up

[driftinsti]

@bmxkid1291997 ....i'm am well aware of how internals of a GAS RIFLE functions. There are no gears in this gun. TRUST ME on this because I BUILT THIS.

[driftinsti]

@MrAsianWay Its supposed to be like that..... THe rail and receiver i made by different companies, you can't expect everything to be drop in perfectly. If you do, suggest you find another sport/hobby because airsoft requires a lot DIY work.

[driftinsti]

@jakeLUXEMBORG Do I smell jealously? hm.....

[Foxtrot493]

Do you have the speed buffer in? Or is that your stock rate of fire?

[driftinsti]

@Foxtrot493 no speed buffer.

[DALASTMIMZY23]

How much and were did you get the gun for (fps?)

[DALASTMIMZY23]

I saw a propane tank in the background to answer someone's question

[MomentumAirsoft]

How were you able to mount the rail system on your rifle? I have the AGM gbb M4 and the threading for the delta ring is different from the threading on the upper receiver. The rail system is the Daniel Defense 7inch free float. Thanks for your help and very nice gun!

[driftinsti]

@MomentumAirsoft AGM threads use their own threading. Its different from G&P/prime metal bodies. G&P and prime also have their own type of threading. I needed to get a G&P barrel nut adaptor for the rail in order to get it to fit.

[SpecialOpsM4]

On average, how many rounds can you get out of one mag fill? Like does it hold enough gas to run through the entire mag on full auto or do you need to flutter it between full and semi throughout the mag like you were doing in the video?

[turtlefreak89]

Please respond, Do you recommend propane for this gun?

[m0120m1]

Hi, It is a cool gun.

I knew the story that forward assist of woc moe did not function properly in WEB.

Does the forward assist function with this gun properly?

[BlitzedMan]

missed out what*

[BlitzedMan]

@driftinsti hi size baller is that?

[BlitzedMan]

@driftinsti Hi what size baller do you have and what size ris is that?

[BlitzedMan]

@driftinsti Hi what size baller do you have and what size ris is that?

[iedhunter44]

i'm getting a King Arms M4 gbb but my annoying friend keeps telling me to buy an AEG instead cuz it cost less and its easier to clean it. But i want it cuz its more realistic looking and feel (also the blow back function) and that its accurate. What is your take on it.

[driftinsti]

@iedhunter44 A GBBR is much more easier to maintain/disassemble than an AEG. While its more realistic in function, its not as practical as an AEG. The gas cool down really effects the performance of the gun especially when firing in full auto and when the temperature is low outside. Gas mags also cost up to or more than $40 while AEG mags can be acquired for 1/4 the price. It really all depends if you're willing to spend the money on a GBBR and willing to spend the time to maintain it.

[driftinsti]

@iedhunter44 i went for a GBBR just because it was realistic and fun to shoot. (It was very fun to shoot)....

[iedhunter44]

@driftinsti right. But is it that much of a pain in the butt to keep it working and clean? That is the main argument people tell me for not to buy a gas blowback gun.

[driftinsti]

@iedhunter44 nope. Once you understand how everything works inside the gun, its really no problem when it comes to taking it apart to replace a broken part or upgrading to a steel one. It was really easy for me. Just make sure you have spare nozzles and bolt catches. Also be sure to get a steel bolt catch from Ra-tech if you get a steel bolt carrier. B/c ra-tech specifically designed the bolt catch to eventually wear out so it won't damage your bolt carrier.

[driftinsti]

@iedhunter44 Its better to replace a cheap part than an expensive one.

[Sunshrine2]

G&P M4 or WE SCAR? (I know bit of a stupid question but G&P seemed more solid to me, but SCAR also didn't look like a easy breaking thing :))

[driftinsti]

@Sunshrine2 definitely go with the G&P m4 or WE m4 because the WE scar has alot of problems in the internals and in the stock plate. Because the stock plate is plastic it'll break from the recoil. TSC has made a aluminum part but another part breaks after you install it.

[Sunshrine2]

@driftinsti Yeah I've heard it's becuz they used CO2 instead of GG.. but anyway.. if somebudy asks you

WE or G&P, what would you take?

[Catalyzer2009]

Can DD RIS be installed directly without any modification?I got one could not lock on the receiver.Thanks

[driftinsti]

@Catalyzer2009 if you're talking about the madbull/socom gear ones, you need a buy a G&P barrel nut in order for the DD ris to fit.

[Catalyzer2009]

@driftinsti Where can I get one.I did some search today, is it called "MadBull Noveske Barrel Nut ",which looks longer than the one comes with the rail system?

[reptileboy1661]

where did u get those handgaurds?

[falconairsoft1]

so would u have to refill the mag with gas every reload

[BlackieChanXXX]

Do you need an RA tech bolt ($265) to adjust the fps ?

[driftinsti]

@BlackieChanXXX if you just want adjust the FPS you can just get the ra-tech npas valve for around $15. The only difference the ratech complete bolt has from an original G&P complete bolt is that it has a npas valve pre-installed and has a steel bolt and alluminum nozzle. The G&P one has a plastic bolt, plastic nozzle and an alluminum carrier.

[B33fisGud]

That thing sounds amazing.

[driftinsti]

@B33fisGud thx

[matthewhoang]

why isnt the bolt locking back if youre dry firing?

[driftinsti]

@matthewhoang there is a switch on the magazine which, when switched off, allows the gun to dry fire.

[Vectar84]

Nice set man, what is the model is this? Maybe I'll collect something like that ;)

[driftinsti]

@Vectar84 There is no model like this. I built it.

[Vectar84]

@driftinsti Man, which model M4 you used? WE, WA... ?

[driftinsti]

@Vectar84 ..you mean the "gas system" type. I used WA.

[BlackieChanXXX]

Is this the gun installed with the RA-Tech heavy recoil NPAS bolt ?

[driftinsti]

@BlackieChanXXX nope

[BlackieChanXXX]

@driftinsti Where did you buy your Prowin mags from ? The cheapest I can find online is $67 each for Version 2 mags.

[driftinsti]

@BlackieChanXXX unfortunately the pro win mags sell for more or less the same price everywhere.

[golizzards]

why?  well when you get a real AR 15 it looks like you can swap parts.

[driftinsti]

@golizzards can't these are all airsoft parts. But i think i'm getting an AK first. Maybe an arsenal or romanian draco

[timon19811981]

joules >1 ?

[MusicForTheSoul221]

Travis Hailey inspired build? ;)

Looks great

[driftinsti]

@MusicForTheSoul221 Its actually a costa inspired build but i changed it up a bit based on my preferences. 

[911airsoftdude]

are your parents stupid or what because my parents would never let me spen 900 dollars on an airsoft gun

[AbovtheBSproductions]

@911airsoftdude Well then your parents are stupid.

[driftinsti]

@911airsoftdude I'm spending my own money on these and don't ever insult my parents again.

[kevin71127]

@911airsoftdude what a loser

[kevin71127]

@911airsoftdude what are you, 7? you cant spend your own money?

[c0dered987]

oh and btw, sick ass rifle, do u mind telling me how much it all cost? im looking into doing the same

[c0dered987]

so why dosent the bolt catch work?

[loldavirofl]

@airsoftjacksonville the ris is a daniel defense ris II

[0mgwtfbbq21]

to be honest, it looked a lot better with a CQB barrel, it looked like the mk18 mod 1 carbine used by SEALs i think, and with the suppressor it looked even sweeter

[driftinsti]

@0mgwtfbbq21 thats the setup i have it in right now. There have been many changes to this GBBR in since this video.

[whoknows2fly]

@driftinsti Can we see the changes? id love to see what yours currently looks like for ideas for my g&p!?!

[wazzup5222]

I know,the charging handle is tempting to pull but please do not wear it out so bad it damages the gun and same goes for drying it messes up the internals. But anyway sweet gun

[TheAirsoftbeast22]

how much gas does that hogg take

[MrCNKILLA]

What brand of rail covers do you have on?

[spearson101]

how much did it cost you

[101stAirsoftDivision]

I have the same watch!!!!!! Seiko seems pretty popular.....ps love the gun...i want to do something like this

[DoinYooMum]

im sorry, i mean where did u buy the rifle, the original rifle, no aftermarket parts.

[driftinsti]

@DoinYooMum i told you. I bought this in pieces. This gun was built from scratch. The trigger assembly to the rail system, stock grip, everything was purchased separately and put together by me.

[ChimStudios]

Hey how easy is it for you to activate your Surefire while using the AFG? Amazing looking gun btw. I could never build a GBBR myself.

[driftinsti]

@ChimStudios its really easy. I've set it up so i don't have to shift my hand at all. Its just moving my thumb from the rail to the switch on the back of the light.

[ChimStudios]

@driftinsti

Alright thanks! Oh btw how did you learn to build it? Are you self taught?

[driftinsti]

@ChimStudios self taught. Really easy to build

[ChimStudios]

@driftinsti

Seems kinda daunting o.o

Can you put the internal parts list in one of your vids?

[driftinsti]

@ChimStudios the only internals inside the gun are the: Trigger, sear, hammer, buffer, buffer spring, complete, bolt, and hop up set. If you're wondering what to get for these GAS rifles, its actually much simpler than AEG's. You just have to look at two different things. 1) that they are made of steel and 2) they have to be made by a high end company like G&P,prime, innokatsu, or Ra-tech. I probably do a vid on how to acquire the right parts for a build as well as what to look for in the parts

[ChimStudios]

@driftinsti

Sounds fantastic! Please do a vid. Ever since I saw your gun I've always wanted to try something like it. I've done AEG's multiple times and want to try something new. I'll sub to keep updated. Thanks!

[ChimStudios]

@driftinsti

Oh btw I would love if you could do a assembling video. Its understandable if you can't but I'll appreciate it.

[driftinsti]

@ChimStudios I really don;t want to take the gun apart. :P But you can look up videos on youtube. Not necessarily tutorial videos but i basically found videos that showed the insides of the gun and i started from there. But the only thing that i needed to research on was the trigger assembly but i figured it out just by watching Ra-tech's vid on how to install the burst kit. All the other stuff i just figured it out on my own when i got the parts.

[driftinsti]

@ChimStudios not to be arrogant or anything but i have noticed that i can build/understand how everything works inside a gun much easier than other people because i always built/designed things with cardboard and lego as kid and i pretty much grew up building stuff(model kits etc.) I remember building my first master grade gundam kit when i was around 7 or 8.

[ChimStudios]

@driftinsti

I loved legos when I was a kid. I was into Zoids and built those all the time. I wasn't really into Gundam. The only thing with me is I need a little bit of guidance. I can't just build stuff out of my head.

[driftinsti]

@ChimStudios Zoids was pretty cool. I only built one though. It was a Liger Zero with a Schneider upgrade kit.

[ChimStudios]

@driftinsti

Liger Zero was the first one I built :D

Except I had a Jager upgrade kit. Really fun to build.

[ChimStudios]

@driftinsti

It really is a shame that they've been discontinued. I remember how excited I was when I got it working.

[DoinYooMum]

if u coudnt mind me asking but where id u buy this gun and how much shipping was, thanks.

[driftinsti]

@DoinYooMum you can't buy this gun. I built it myself.

[Quartz91]

Why didnt you buy a new innerbarrel instead, looked so much cooler with the cqb barrel :D

[driftinsti]

@Quartz91 i couldn't find one.

[justbecauseitsnot]

How is the gas consumption on it and where did you get the money for it?

[driftinsti]

@justbecauseitsnot gas consumption is not too bad. Depends on the temp.

[FredErikson9111]

Awesome gun. I have a few questions about that gun. What type of gas do you use in it and are all the internals stock? Please reply

Thanks

[MaDNeSs0051]

someones been watching "Magpull Dynamics Art of The Tactical Carbine"

nice set up man btw

[MagpulAR15Lover]

Hey, I remember watching a video of yours a while ago about how you only trust G&P sights on GBBR'S and you were sceptical about your Daytac T-1. G&P makes a micro t-1, I'm picking one up and just using a Daytac mount. Anyways I might get the Daytac and when you showed us the first person view through the red dot it looked blurred or something. Was it just the camera or is it clear when looking through the optic?

[driftinsti]

@MagpulAR15Lover its just the camera.

[SuperGrandisle]

If you dont mind me asking but what size is your inner and outer barrel and your RIS

[driftinsti]

@SuperGrandisle its 14.5 inch outer barrel. Inner barrel is around 360mmi think. My RIS is an mk18 ris 9.5inch.

[xx15mini15mobster]

look its not that hard you can get all this from airsplat and no i dont work there i just buy alot of stuff from there

1. buy the agm gbb m4

2. buy a magpull tan stock

3. buy a 14 in barrel

4.buy magpull flip up sights

5. buy a tan pistol grip

6. ACCESSIORIES buy different multi color rail gard peices in his case dark earth and black , buy tan reflex site, buy tan laser mount, buy steel flashh hider, buy tan flashlight with flash light rail mount

THATS ALL YOU NEED!!!! about $650

[driftinsti]

@xx15mini15mobster airsplat is a no go for me.

[driftinsti]

@xx15mini15mobster you also need reinforced internals so it'll cost more than $650.

[0mgwtfbbq21]

@xx15mini15mobster biggest mistake there is tha you bought it from shitsplat

[csmybuttt]

@xx15mini15mobster You shop at airsplat? Fail.

[pastjax]

@xx15mini15mobster  tobad its not that easy and thats just externals and you forgot the afg

failure

[TheOnlyEliteSniper]

is that the socom mount? or some other type? I'm thinking about the Dytac one

[KINGhotaru11]

Dude can u build me one or show me where to buy one.. ill pay

[driftinsti]

@KINGhotaru11 sorry. I can't build you one. You can't buy this anywhere as a whole gun. I bought pieces from different places to build.

[KINGhotaru11]

I wanna buy one ready made where can I get it

[driftinsti]

@2J8O4S6H9 no i built it piece by piece. 

[2J8O4S6H9]

are you in a school establishment? Not trying to be nosy but it looks like you are in a college /university. I would be careful were shooting that, dont want some dumbass to think it was an actual rifle and call the police on you.

[driftinsti]

@2J8O4S6H9 no i'm not

[0mgwtfbbq21]

is that the DD ris II?

[nonamre]

Could you tell about where you got the parts to make this custom gun? I would like to build one as well but parts just seem too few and far by these days.

[cmzangetsu1993]

do you have a High speed buffer or is that somthing close to stock??

Oh and do they make high kick buffers?

[Maxrock9]

I take it those new G&P Pmags are too expensive eh?

[driftinsti]

@Maxrock9 i just haven't gotten them yet. The prowins are actually much more expensive. Its just that i wasn't sure if the pmags were good. I'm just waiting on the reviews. 

[TheOnlyEliteSniper]

man you just make me want to upgrade my gun so quickly now. Can't wait till i get my parts for my WOC-X

[dillythakid69]

shoots so crisp!!! all G&P internals??

[driftinsti]

@dillythakid69 yup! 

[GhostFaceSkrilla]

@dillythakid69 Prolly smoother than a WE PDW :B

[dillythakid69]

@GhostFaceSkrilla fuck off lol

[MagpulAR15Lover]

Do you prefer the XTM rail panels? Im thinking about getting a GBBR. Any problems with leaking? I think once I get a solid gun and add a full upgrade kit it should be golden. Im just worried about mags leaking especially because thats become a common occurrence in my GBB sidearm. Thats the only thing standing in my way of getting a GBBR.

[driftinsti]

@MagpulAR15Lover what GBB sidearm do you use?

[MagpulAR15Lover]

@driftinsti KJW KP07 1911 MEU. I got it last september and here in Chicago it gets cold, well too cold for the GBB fast! I only got to use it for about 2 weeks. Maybe a GBBR might not be the best option because I prefer Co2 but maybe I'll grow on propane. It looks like most of the GBBR's dont do so well with Co2, like many gas handguns. I'll have to find some kind of medium because GBBR's are so realistic! I've also heard GBBR's are very finicky and ultra demanding with many problems.

[driftinsti]

@MagpulAR15Lover KJW?? That explains why gun leaks. KJW is a clone not a very good GBB company. Their MEU 1911 line is a complete copy of the Tokyo marui system. If you want a good reliable GBB go with a higher quality company. Never cheap out on GBB's. NEVER! O.O

[MagpulAR15Lover]

@driftinsti Well actually I thought it was leaking but it was way to cold to get a gas fill. KJW's are just fine. Very good quality but you could hear different from me in the next couple months once I put more than 100 rounds through it haha. Im thinking about getting a King Arms GBB M4, which is the easiest to buy because they are now legal in the U.S! I dont have the money for it right now but I'll wait to see some reviews of it.

[driftinsti]

@MagpulAR15Lover The King arms GBB's are pretty good. They are the same if not better than G&P WOC's.

[xxthehuskycaboosexx]

@driftinsti so the king arms are just as good as WOC's? i still have my woc, i have not skirmished it once mainly cause of mags. and im thinking of buying the king arms gbbr cause of mags, and so i will have another gbbr. you think its a good idea? or should i just get another AEG? thanks.

[driftinsti]

@MagpulAR15Lover that's what i did before (cheap out). Then a proprietary piece inside my gbb broke and there was no way to get a replacement.

[GABRIELPILOT395]

What is your flash hider and a silencer? Where to buy?

[911airsoftdude]

take the rail cover off either the left or right side and put the peq box on there and put the rail cover on top i wanna see what it looks like

[driftinsti]

@911airsoftdude no.....

[TheOnlyEliteSniper]

@driftinsti ohhhh someone just got friiiiiiiiiied

[whoknows2fly]

how much was it? interested in replicating exactley