@111thRutlandReapers well i was just saying, because paintballers are always calling airsofters pussies. but then airsofters dont really do anything back. i was just noticing because i play both, so watch vids of both
@Eytchasketch109 Alot of videos the airsofters start the fight and say that paintball isnt milsim enough and go crazy with that. Both players can be MAJOR douches at times. I'm a paintballer to the core, but I use to airsoft when I was younger. If you watch alot of paintball vids you'll see airsofters hating and vise versa. Its stupid because we're under the same category. We need to defend each other. Esp with laws coming in like that bill they wanted in Cali.
By utilizing the Magnus effect, it creats a straighter trajectory, and longer range. This helps in firing under low hanging branches at range, as well as distant targets.
@kanmashma He mentioned the swab squeegee, but the cable squeegee or any other squeegee should be fine. You're going to dump it in hot water to get the remaining residue out anyway.
There a trick to turning the screw with the 3/32, mine is new so that is understandable and it does need to be adjusted but its hard to turn the screw
@snaicli - I get several requests for maintenance videos, like the 98 series barrels. The problem is that I can only film what I have, and I don't have the cash to go out and buy one. If you have one, I'd be willing to pay for shipping back to you. I can film it and have it shipped out within four days of receiving it. A few people have offered me this opportunity.
i got the shroud off and everything and im at the part where u have to unscrew the 2nd screw to line up the barrel and i catch the screw but it is SOOOO impossible to turn it i almost broke the tool it will not move at all also there is no notch on the barrel either, im really starting to hate this barrel
i have a question i just got this barrel and just put this right in and it was really inaccurate im not sure if it was the wind but i heard people say u have to set the speed at like 275 and u said u have to set the line and u need good paint r these the only things u have to do and how do u set ur speed and how can u tell wat speed its at? please need help
@SqueakyMafia - Okay, if you don't know how to test the speed you are at, you MUST MUST MUST MUST get a chronograph. These are no longer very expensive, and hand-held ones can be purchased as low as $60. If you can't get one, use a friend's/teammate's. If nobody in your playing group has one, DO NOT PLAY. Cancel the day and and use that money to go buy a chronograph.
@SqueakyMafia - Second, there are a lot of details to think about, such as weather conditions, exact paint quality, the speed of the ball, your shooting position, etc. And I wouldn't set the chrono higher than 280, TOPS. 270fps is better.
@SqueakyMafia you really have to adjust the Flatline to whatever works best for YOU... so buy the best balls you can, and go outside and just adjust your velocity until you get your best grouping...
and the thing that might throw you off the most is if you use Co2. Co2 is disastrous for a flatline barrel. it's not only inconsistent, but it coats your barrel with snow. so if you're using Co2, either buy HPA, or give up on the flatline.
i have a question i just got this barrel and just put this right in and it was really inaccurate im not sure if it was the wind but i heard people say u have to set the speed at like 275 and u said u have to set the line and u need good paint r these the only things u have to do and how do u set ur speed and how can u tell wat speed its at? please need help
@maxmusk19 - That assumes that it takes a "roll" to create the Magnus effect. You're equating one to the other, and that's not true. The roll of the ball is simply ONE METHOD of attaining the Magnus effect. Planes attain it by wing shape (more curved on the top than the bottom) and speed.
@TheJourney01 - Depends. Smaller in what way? Bore size? No, as they both have varying bore sizes more dependent upon the manufacturer of the barrel, not the marker itself. Length? No, because they both have varying length options. Outter diameter? Again, more dependent upon the barrel manufacturer, not the marker.
My brother recently gave me his tippmann a5 with flatline barrel and I was wondering what exactly does it do and what can i do to make it a better gun?
@lamborghini959 i guess you could, all you really have to do is take off the tube, but the thing is that the adapter is still there, i have a project salvo
@lamborghini959 no it doesnt. i have a project salvo and both kinds of flatlines on my 98's. the salvo shroud goes straight. the quickthread flatline and old one jus get stuck. jus buy an apex
flatlines increase range by about 100ft, while nightsticks claim to increase accuracy (i have nothing to verify this though). Personally, I prefer the flatline because there's nothing better in woodsball than being in range of a guy that can't reach you.
they most likely haven't put it on correctly for their gun. Or they could be talking about it at close range since I heard it get's a little inaccurate at close range but then again, who needs high accuracy when the enemy is standing 15 feet away?
haha i dnt kno , i won one only played wit it once tho and it wasnt acurate at all short/long distance , but i think i found out the reason(finnaly aftr bunch of research) i think my fps was set wayyy 2 high i read on a5og site its gota b around 250-260 fps for a flatline mine was max that field alllowed so 280-290 , and i broke like 50 balls lol,
i have the flatline on my a5 stealth. but if i wanted to throw on a different barrel do you kno how i would go abt doing that. cus on my a5 there are no grooves to screw in an upgraded barrel (cus it came with the flatline). Thanks
On the bt4 you can use a A-5 barrel adapter, and replace that with the flatline barrel, it should work, but you should check into the apex, it's pretty nice,
Agreed. While it's annoying, loosening the receivers of your marker is sometimes a boon. That means that the barrel is tight and won't shake loose in a game. Frankly, I'd prefer that to my loose-as-a-hooker flatline adapter.
No one answer to that. In some climates, Stingers work excellent. In others, they are crap. Pretty much the only way to find out is to try it in your area with your marker.
Noticed how long ago the video was posted but i had a few questions. First off does the flatline actually shoot farther then a conventional barrel? Second, could you possibly make a video showing this? Shot some rounds with a regular barrel, shot a different color with the flatline, and show where the different shots landed. It would be greatly appreciated before make my barrel choice. Nice video btw, I could actually hear you compared to most other videos.
Yes, it shoots farther than a straight barrel. There is a proven scientific method on how this is accomplished (using the Magnus Effect - same reason a plane stays airborne). Right now, I can't do the video, as I don't have a place to film it, currently.
I know why it should work, not to sound cocky but, I'm a senior double major mechanical aeronautical engineer. It's just that we always learn there is a difference between theory and reality. I just wanted to see a video to see if there is a substantial increase in distance. Keep it in mind if you do get a place to film, or once it gets warmer. Once again nice job on the vid.
it creates a back spin on the ball wich in theory will keep the ball up longer but its proven now so no more theory and its like playing pool put the back spin on the ball and it comes back but this paintball is in the air so it stays up longer
It's always possible to damage the barrel. But the flatline is not alone in that. ANY barrel could be damaged, if the conditions are right (wrong?). The shroud doesn't protect it much from anything but simple dings and the like.
I would like a video of how to install it aswell for the first time. I've loosened the three front screws as in manual, but i dont understand what to do next, I cannot turn it right or left.
I need help. What would be the best way to get the barrel off of a stuck rear adapter plate? The scribe mark is not aligned and i can twist it or pull it off. Please respond
First thing I gotta ask is if you loosened the screw at the top of the adapter? If so, then try using a strap wrench and penetrating oil to loosen it. If you haven't loosened the screw, then...well...
flatline i a good barrel but the only thing i have problems with is the kinds of balls you wanna use you cant go to wal mart and buy their balls that work good with the flatline that is why i prefer the apex it works good with any ball and you dont have to worry about the valocity and never use monster ball in any of your guns their peices of shit
Do you mean a 98 with a flatline installed? Too many details needed to answer properly, and it's not really a calculable deal. But GENERALLY most people report a longer range with the 98C flatline.
Some individuals have, but none are commercially made. Making one yourself is an illegal act, and can get you in trouble with the ATF. The only way around that is to permanently attach it to the paintball marker (notice I said "marker", not "barrel"). This means you can NEVER take off the barrel.
ive never been a fan of auomatic fire... i stick with semi... lol... i can trigger really fast seems like it auto...but yea hats just me....and thnx for the vid ...it helped alot... i didnt know what that mark of the barrel was... keep makin vids
I have a question i have an A5 with an E grip and when i go to cock the gun it won't cock. but when i put my original trigger it cocks just fine. what should i do.
After putting my flatline in hot water (just hot from tap not boiling). I used a battle swab and a squeegee to dry off the water on the inside but I noticed that some sand and what looks like the stuff from the inside of the barrel came off. And the inside of the barrel seems smoother. Is this going to cause any problems with the Flatline's performance?
On my flatline when i install it the shell of the gun doesnt close all the way near the sight. I also cannot get the sight screw to go in all the way. Any suggestions?
were did you get your flatline barrel im in canada so i wanna know if there are any websites i can visit
itsZoHaNTV 3 weeks ago
@itsZoHaNTV - Couldn't answer much for Canada, I'm in the States, sorry.
JackRockBLC 2 weeks ago
has anyone noticed that paintballers always hate on airsofters but airsofters leave paintballers alone?
Eytchasketch109 8 months ago
@Eytchasketch109 No. I havent. Maybe because its not true.
111thRutlandReapers 7 months ago
@111thRutlandReapers well i was just saying, because paintballers are always calling airsofters pussies. but then airsofters dont really do anything back. i was just noticing because i play both, so watch vids of both
Eytchasketch109 7 months ago
@Eytchasketch109 Alot of videos the airsofters start the fight and say that paintball isnt milsim enough and go crazy with that. Both players can be MAJOR douches at times. I'm a paintballer to the core, but I use to airsoft when I was younger. If you watch alot of paintball vids you'll see airsofters hating and vise versa. Its stupid because we're under the same category. We need to defend each other. Esp with laws coming in like that bill they wanted in Cali.
111thRutlandReapers 7 months ago
@111thRutlandReapers i tip my hat to you sir.
Eytchasketch109 7 months ago
@Eytchasketch109 And I too you fellow
111thRutlandReapers 7 months ago
I havent used my gun inawhile i cant seem to get my barrel off of my gun HELP?
909Kunfused909 1 year ago
@909Kunfused909 i know its been awhile, what kind of barrel
MrExtremepaintballr 8 months ago
how much dus dis cost
kbizze2fresh 1 year ago
Can someone help is a flatline barrel better that an 18 inch barrel? (I'm shootint from 100 to 200 yards) :/
TheSpeeeer 1 year ago
Boiling water = 212 degrees ...very hot tap water =120 degrees.
BandB1111111 1 year ago
By utilizing the Magnus effect, it creats a straighter trajectory, and longer range. This helps in firing under low hanging branches at range, as well as distant targets.
JackRockBLC 1 year ago
Hey what does the flatline do like how does it help
wUniTeDw 1 year ago
@wUniTeDw It increases the range of your gun by about 100 feet (double for most guns)
Snapshot290 1 year ago
Do I dump the whole thing in hot water?
hot4art 1 year ago
@hot4art - Yup, you sure do.
JackRockBLC 1 year ago
Use a battle swab or similar.
JackRockBLC 1 year ago
what type of squeegee do I use?
kanmashma 1 year ago
@kanmashma He mentioned the swab squeegee, but the cable squeegee or any other squeegee should be fine. You're going to dump it in hot water to get the remaining residue out anyway.
hot4art 1 year ago
4 people must of bent their flatline barrel straight then watched this video XD
thatkindofguy234 1 year ago
Hey i used a hard squegee and I think i took out that sand stuff inside? Anyway to fix this?
TailPress09 1 year ago
@TailPress09 - You'll need to contact Tippmann and see if they can help you on this one.
JackRockBLC 1 year ago
There a trick to turning the screw with the 3/32, mine is new so that is understandable and it does need to be adjusted but its hard to turn the screw
TheSigmaResurgence 1 year ago
can you just put the barrel part in your gun?? wat I mean is do you have to have the cylinder body on it??
5ozofpain 1 year ago
Thanks Mr. I learned a lot and I will take care of my Flatline. It was very educational. Now I know. :)
pinoyword7up 1 year ago
flatlines suck get an apex barrel
Runescapian1996 1 year ago
What is thing?
TonyPaj 1 year ago
Can you clean the 98PS version the same way?
snaicli 1 year ago
@snaicli - I get several requests for maintenance videos, like the 98 series barrels. The problem is that I can only film what I have, and I don't have the cash to go out and buy one. If you have one, I'd be willing to pay for shipping back to you. I can film it and have it shipped out within four days of receiving it. A few people have offered me this opportunity.
JackRockBLC 1 year ago
i got the shroud off and everything and im at the part where u have to unscrew the 2nd screw to line up the barrel and i catch the screw but it is SOOOO impossible to turn it i almost broke the tool it will not move at all also there is no notch on the barrel either, im really starting to hate this barrel
SqueakyMafia 1 year ago
@SqueakyMafia - They may have changed how they made the barrel. If the screw is there, you could try some Liquid Wrench to loosen it.
JackRockBLC 1 year ago
i have a question i just got this barrel and just put this right in and it was really inaccurate im not sure if it was the wind but i heard people say u have to set the speed at like 275 and u said u have to set the line and u need good paint r these the only things u have to do and how do u set ur speed and how can u tell wat speed its at? please need help
SqueakyMafia 1 year ago
@SqueakyMafia - Okay, if you don't know how to test the speed you are at, you MUST MUST MUST MUST get a chronograph. These are no longer very expensive, and hand-held ones can be purchased as low as $60. If you can't get one, use a friend's/teammate's. If nobody in your playing group has one, DO NOT PLAY. Cancel the day and and use that money to go buy a chronograph.
JackRockBLC 1 year ago
@SqueakyMafia - Second, there are a lot of details to think about, such as weather conditions, exact paint quality, the speed of the ball, your shooting position, etc. And I wouldn't set the chrono higher than 280, TOPS. 270fps is better.
JackRockBLC 1 year ago
@SqueakyMafia you really have to adjust the Flatline to whatever works best for YOU... so buy the best balls you can, and go outside and just adjust your velocity until you get your best grouping...
and the thing that might throw you off the most is if you use Co2. Co2 is disastrous for a flatline barrel. it's not only inconsistent, but it coats your barrel with snow. so if you're using Co2, either buy HPA, or give up on the flatline.
AirgunAddict256 1 year ago
i have a question i just got this barrel and just put this right in and it was really inaccurate im not sure if it was the wind but i heard people say u have to set the speed at like 275 and u said u have to set the line and u need good paint r these the only things u have to do and how do u set ur speed and how can u tell wat speed its at? please need help
SqueakyMafia 1 year ago
Airplanes dont roll
maxmusk19 1 year ago
@maxmusk19 - That assumes that it takes a "roll" to create the Magnus effect. You're equating one to the other, and that's not true. The roll of the ball is simply ONE METHOD of attaining the Magnus effect. Planes attain it by wing shape (more curved on the top than the bottom) and speed.
JackRockBLC 1 year ago
Comment removed
TheJourney01 1 year ago
i still don't know one thing are a5 barrles smaller than 98 barrels
TheJourney01 1 year ago
@TheJourney01 - Depends. Smaller in what way? Bore size? No, as they both have varying bore sizes more dependent upon the manufacturer of the barrel, not the marker itself. Length? No, because they both have varying length options. Outter diameter? Again, more dependent upon the barrel manufacturer, not the marker.
JackRockBLC 1 year ago
that flatline makes the ball spin backwards because of the curve in the barrel. which makes it travel farther
miamidolphins48696 1 year ago
My brother recently gave me his tippmann a5 with flatline barrel and I was wondering what exactly does it do and what can i do to make it a better gun?
Cramp213 2 years ago
Does the 98 flatline fit one the project salvo without taking off the salvo shroud?
lamborghini959 2 years ago
Can't answer that one. Never owned a 98, nor the Salvo.
JackRockBLC 2 years ago
@lamborghini959 i guess you could, all you really have to do is take off the tube, but the thing is that the adapter is still there, i have a project salvo
LiSstudioz 2 years ago
Comment removed
YoungGamemasta 2 years ago
@lamborghini959 no it doesnt. i have a project salvo and both kinds of flatlines on my 98's. the salvo shroud goes straight. the quickthread flatline and old one jus get stuck. jus buy an apex
thizizmainame 1 year ago
i just got a tippman a5 what barrel should i get and how much money would it be, and should i get a stock for it
blueblade259 2 years ago
whats the ranche that unescrew the second screw???
zeux1234 2 years ago
really grinds my gears when ppl call it Hex Wrech..
:P
TechFitzpb 2 years ago
@TechFitzpb yeah me too, its an allen wrench, not hex wrench lol
kylebourg 2 years ago
i have an adapter for my slg. I have a flatline on my Slg its sweet.
ExEPaintball 2 years ago
Great video, very useful in showing what the Flatline is, and how to maintain it.
PolymoogFred 2 years ago
does the flatline help your a5s acruacy
Yamahapaintballer 2 years ago
BIG TIME! it will get more more range to!
dzsk8r 2 years ago
ok i have the flatline for my a5 and it keeps chopping paint and my a5 is only shooting up to 23o fps why do u think its doing that
Yamahapaintballer 2 years ago
Comment removed
rcwor1d 2 years ago
Comment removed
ThePerplexiteeZy 2 years ago
when i bought my a5 i had no idea about the flatlines curve and i thought it was bent to shit, then i looked it up found this and BAM thanks!
chemicalvalleysessio 2 years ago
Why would u need to turn it?
TPSproductionz 2 years ago
It's amazing how simple the flatline is when you take it apart and examine it.
07blackhawk07 2 years ago
I jizz THUNDER!!!
CRFbadass 2 years ago 2
and were gonna screw this boy together
ThePerplexiteeZy 2 years ago 7
LOL
fakenphoney 2 years ago
the way he says it at 4:40 is soo funny haha
ThePerplexiteeZy 2 years ago
that was funny
Yamahapaintballer 2 years ago
how much did the flat line cost
cj3r0m3 2 years ago
they're about $100, i'm looking into one [for my A-5] with battle shrouds at 12, 3, 6, and 9 o'clock. yep, 4 of em... ;)
ARMYMan92 2 years ago
well i've used the flatline as well and for that bit it goes farther you loose alot of accuracy! so i think it doesnt really give you an advantage...
ZineX07 2 years ago
cheak out my video on flatline accuracy test (mid rang)
pbProductions96 2 years ago
flatline
BoxterRs 2 years ago
which is better flatline barrel or straight line
spideysense2 2 years ago
you cant compare those two!
1. Flatline is for distance, not so much accuracy, but it does OK.(I own one)
2. Straightline is made purely for accuracy. Now I havent tested it, but based on details from tippmann I can make these assumptions
If you're looking for a great accuracy barrel I recommend the Lapco Snapshot barrel!
fizzledizzle12 2 years ago
well flatline is more distance straight line is more accurate
pbProductions96 2 years ago
does this make it curve or go farther
paul13083 2 years ago
curve
Dannny135 2 years ago
curve..? thats the Apex barrel...
flatline makes it go farther!
fizzledizzle12 2 years ago
Go farther
pbProductions96 2 years ago
can i put a flatline barrel on my alpha black
Dannny135 2 years ago
yea put you need one of those 5$ addaptots
xXxtwizkidxXx 2 years ago
a flatline for my A5 is it going to work fine with e grip?
joker69pr 2 years ago
which one is better? apex on bravo one with cyclone feed and e grip. or A-5 with just flatline nothing else..
chrisbballninja 2 years ago
I personally prefer the Apex barrel over the Flatline.
InterestingFlavour 2 years ago
thanks turns out that i got A-5 with H.E E-grip instead but im getting apex m16 and carstock and lapco M4 mag for bday
chrisbballninja 2 years ago
Sounds like a good deal :) Good luck
InterestingFlavour 2 years ago
does this fit on a piranha?
ninjaofmadness 2 years ago
no, it has a special adaptor plate that fits only on the A-5
WesDesto 2 years ago
k, i have saw these on many tac-5's so idk??
ninjaofmadness 2 years ago
there are different flatlines for different guns
samooray685 2 years ago
by any chance would there be a make for a piranha?
ninjaofmadness 2 years ago
fuckg piece of shat barrel and they charge so much for it they are THIEFS FUCKG FAGGOTS
AmericansSexualPreds 2 years ago
Nice Vid
Very Informative :)
THEMAINPLAYER 2 years ago
hey whats better a nightstick or a flatline please reply
pbProductions96 2 years ago
flatlines increase range by about 100ft, while nightsticks claim to increase accuracy (i have nothing to verify this though). Personally, I prefer the flatline because there's nothing better in woodsball than being in range of a guy that can't reach you.
7Lycosa7 2 years ago
how about all those ppl saying flatline sux couse of its poor accuracy?
tommidrab 2 years ago
they most likely haven't put it on correctly for their gun. Or they could be talking about it at close range since I heard it get's a little inaccurate at close range but then again, who needs high accuracy when the enemy is standing 15 feet away?
7Lycosa7 2 years ago
haha i dnt kno , i won one only played wit it once tho and it wasnt acurate at all short/long distance , but i think i found out the reason(finnaly aftr bunch of research) i think my fps was set wayyy 2 high i read on a5og site its gota b around 250-260 fps for a flatline mine was max that field alllowed so 280-290 , and i broke like 50 balls lol,
tommidrab 2 years ago
hey i got a question why do flatline barrels increase the range soo much?
kingr33per 2 years ago
it puts a backspin on the ball
rpkhomy 2 years ago
i have the flatline on my a5 stealth. but if i wanted to throw on a different barrel do you kno how i would go abt doing that. cus on my a5 there are no grooves to screw in an upgraded barrel (cus it came with the flatline). Thanks
kamalazeez 3 years ago
barrel adapter
tommidrab 2 years ago
why does my flatline barrle keep comeing out of the holder in the miidle of the game.
armyqpzm 3 years ago
this thing is so simple yet so expensive thats why i like my apex. cheaper, lighter, and ajustable
licebuddies 3 years ago
so is it actully necesary to take the cylinder cover thing off before you dunk it in hot water? plz message me the answer.
XF8593 3 years ago
Message inbound.
JackRockBLC 3 years ago
wow i learned somthing i new it went farther but not y it hits the top cool
joshcordeiro 3 years ago
does this flatline fit the bt4 assult or is there a flatline for the bt4 assult at all i want one one there
xEmzx19 3 years ago
there are only flatlines for the a5 x7y and 98c. for the bt4 go for the apex much cheaper, more versitile, and lighter.
licebuddies 3 years ago
On the bt4 you can use a A-5 barrel adapter, and replace that with the flatline barrel, it should work, but you should check into the apex, it's pretty nice,
SUPERCANCER33 3 years ago
Maybe its just me, but I'm having a lot of trouble taking my flatline barrel off my A-5. The only way I can get it off is taking apart the gun.
deltatrevor 3 years ago
yeah thats pretty much the only way to take it off
vandalsandsuch 3 years ago
Agreed. While it's annoying, loosening the receivers of your marker is sometimes a boon. That means that the barrel is tight and won't shake loose in a game. Frankly, I'd prefer that to my loose-as-a-hooker flatline adapter.
JackRockBLC 3 years ago
what is the cheapest paint that the flatline won't destroy. I'll be honest, im not the richest.
tacoboy15 3 years ago
i dont know but apparently cryptic works pretty good. i dont think it is too expensive if you get it on the internet
lax4life1193 3 years ago
No one answer to that. In some climates, Stingers work excellent. In others, they are crap. Pretty much the only way to find out is to try it in your area with your marker.
JackRockBLC 3 years ago
Noticed how long ago the video was posted but i had a few questions. First off does the flatline actually shoot farther then a conventional barrel? Second, could you possibly make a video showing this? Shot some rounds with a regular barrel, shot a different color with the flatline, and show where the different shots landed. It would be greatly appreciated before make my barrel choice. Nice video btw, I could actually hear you compared to most other videos.
flatwaretech 3 years ago
Yes, it shoots farther than a straight barrel. There is a proven scientific method on how this is accomplished (using the Magnus Effect - same reason a plane stays airborne). Right now, I can't do the video, as I don't have a place to film it, currently.
JackRockBLC 3 years ago
I know why it should work, not to sound cocky but, I'm a senior double major mechanical aeronautical engineer. It's just that we always learn there is a difference between theory and reality. I just wanted to see a video to see if there is a substantial increase in distance. Keep it in mind if you do get a place to film, or once it gets warmer. Once again nice job on the vid.
flatwaretech 3 years ago
it creates a back spin on the ball wich in theory will keep the ball up longer but its proven now so no more theory and its like playing pool put the back spin on the ball and it comes back but this paintball is in the air so it stays up longer
xEmzx19 3 years ago
if you took of the shroud and played without it could you damage the barrel
labatesblue 3 years ago
It's always possible to damage the barrel. But the flatline is not alone in that. ANY barrel could be damaged, if the conditions are right (wrong?). The shroud doesn't protect it much from anything but simple dings and the like.
JackRockBLC 3 years ago
thats a barrel. that looks more like a muffler
codybear56 3 years ago
No, it looks like a barrel with a shroud.
JackRockBLC 3 years ago
would you be able to use a sqweegee on the flatline barrel?
tippmanna5lol1 3 years ago
no, not the squeegees. You could use the furry ones though. If you use a squeegee, you could (over time) destroy the sand blasted surfaces.
kartoonkid49 3 years ago
why doesnt it just screw on?
what if you broke a ball, you wouldnt be able to clean it
ZAKMASUR10 3 years ago
...did you even watch the whole video?
Keetbix 3 years ago
Because it needs a perfect vertical alignment to work properly. This cannot be consistently achieved with a threaded system.
JackRockBLC 3 years ago
never mind, I did it when I got the barrel inscrewed, watched the X7 tutorial.
jimmarn 3 years ago
I would like a video of how to install it aswell for the first time. I've loosened the three front screws as in manual, but i dont understand what to do next, I cannot turn it right or left.
jimmarn 3 years ago
I need help. What would be the best way to get the barrel off of a stuck rear adapter plate? The scribe mark is not aligned and i can twist it or pull it off. Please respond
wippudaeu 3 years ago
what i meant to say is "i CANT twist of pull it off."
wippudaeu 3 years ago
First thing I gotta ask is if you loosened the screw at the top of the adapter? If so, then try using a strap wrench and penetrating oil to loosen it. If you haven't loosened the screw, then...well...
JackRockBLC 3 years ago
Thanks for that info, but does the flatline barrel cut down on range?
CHECKMIX 3 years ago
its the opposite, it gives you more range 250 ft total.
eckok 3 years ago
flatline i a good barrel but the only thing i have problems with is the kinds of balls you wanna use you cant go to wal mart and buy their balls that work good with the flatline that is why i prefer the apex it works good with any ball and you dont have to worry about the valocity and never use monster ball in any of your guns their peices of shit
painter3636 3 years ago
will the a-5 flatline barrel fit onto a BT-4 Assault?
Silentline00 3 years ago
I do not know. I haven't had a chance to mess with the BT4 series.
JackRockBLC 3 years ago
Apex or Flatline?
Deadcell205 3 years ago
how well does a 98compared to this in distance?
Voudim 3 years ago
Do you mean a 98 with a flatline installed? Too many details needed to answer properly, and it's not really a calculable deal. But GENERALLY most people report a longer range with the 98C flatline.
JackRockBLC 3 years ago
ok is a Flatline Barrel of a 20in barrel better for like rang and groping
me2100me 3 years ago
Flatline will be better for range. A 20" barrel is a waste of gas, as is anything over 14" or so.
JackRockBLC 3 years ago
did you have a cold or a runny nose when you made this? cuz you are like "snuffling" alot
mjharting 3 years ago
wat kind of barrel do u recommend for a A-5???
diegovelazquez88 3 years ago
omg lol a flatline
jakemonf22 3 years ago
Apex with lapco 14" bigshot bbarrel
Zixman1 3 years ago
flatline by far
musicman12345678910 3 years ago
this helps dude thanks im thinking of getting a a-5 with flatine and stock remote line etc.
Blinkurded45 3 years ago
wich is better for an A-5??? flatline or APEX
natespilka 3 years ago
Neither one is really better in all cases. You have to consider cost, features, appearances, etc. Most will consider the APEX better, but not all.
JackRockBLC 3 years ago
Do they make silencers for paint ball markers?
tittysmithy 3 years ago
Some individuals have, but none are commercially made. Making one yourself is an illegal act, and can get you in trouble with the ATF. The only way around that is to permanently attach it to the paintball marker (notice I said "marker", not "barrel"). This means you can NEVER take off the barrel.
In other words....don't.
JackRockBLC 3 years ago
ya but it retarded
tbhogan15 3 years ago
Very informative ^_^ 5/5 stars ^_^
buytime 3 years ago
No. If you see when I take the shroud off, the barrel tube is quite curved. Look inside the bore, and you will find it's rough, not smooth.
JackRockBLC 3 years ago
isn't the flatline barrel just a regular barrel, just with a shroud on it???
rnguyenyo 3 years ago
Oh no, it is a curved barrel that puts backspin on the ball to increase your range from 150ft to 250ft.
PROTORAILPBALL 3 years ago
I shot a hole through a basket ball gold with my flatline and response trigger. Flatline will knock the crap out of you.
woolygator 3 years ago
ive never been a fan of auomatic fire... i stick with semi... lol... i can trigger really fast seems like it auto...but yea hats just me....and thnx for the vid ...it helped alot... i didnt know what that mark of the barrel was... keep makin vids
swatboyzzz 3 years ago
I have a question i have an A5 with an E grip and when i go to cock the gun it won't cock. but when i put my original trigger it cocks just fine. what should i do.
Vikings0028 3 years ago
Try checking your sear.
JackRockBLC 3 years ago
what is a sear......? (sorry about the question)
terminator6267 3 years ago
After putting my flatline in hot water (just hot from tap not boiling). I used a battle swab and a squeegee to dry off the water on the inside but I noticed that some sand and what looks like the stuff from the inside of the barrel came off. And the inside of the barrel seems smoother. Is this going to cause any problems with the Flatline's performance?
hawk51269 3 years ago
It may or may not. Depends on how much came off. If you find it does affect the performance, contact Tippmann to have the barrel re-sandblasted.
JackRockBLC 3 years ago
can u make a vid on how to install the flatline i cant get it right
vidrick7 3 years ago
i'm having the same problem, i just can't get it right
htownmike68 3 years ago
Great vid man.
would a flatline and an e grip be a good match for my a-5?
Ty0508 3 years ago
flatline is the best
tippmannmanic 4 years ago
flatline is the best
tippmannmanic 4 years ago
On my flatline when i install it the shell of the gun doesnt close all the way near the sight. I also cannot get the sight screw to go in all the way. Any suggestions?
coleman1771 4 years ago
Can the screw tighten at all, or is it not gripping the threads?
JackRockBLC 4 years ago