@rwg42985 a plasma lamp is usually a clear glass orb filled with a mixture of various gases (most commonly neon, sometimes with other noble gases such as argon, xenon and krypton) at nearly atmospheric pressure. They are driven by high-frequency alternating current at approximately 35 kHz, 2–5 kV, generated by a high-voltage transformer. A much smaller orb in its center serves as an electrode.
@rwg42985, The diagram 19:30 you are trying to understand seems to be the process of making the nano sized particles, the same process they use to make colloidal silver and gold probably why it wasnt his patent its already well known. a container of distilled water with 2 silver probes in the water with a current applied from a 9v batter running through the probs releasing silver ions as the material breaks down, look up tutorials on youtube to see it in action good luck hope that helps.
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
So am I getting this right? It looks to me, from my overview of the patents that he's just using some kind of circular tube with gas in it, and as it passes one side it demagnetizes the particles then shoots them out, then when they hit the other side they're magnetized and shot away again back towards the other side?
I believe the magnetized particle source is a deionizer. This will take a medium and transform the polarity, creating a specific charge of ions. Look into it, I'm pretty sure that is the device you are looking for.
You proabley already have seen this video on youtube. If not it may help with the answers you are after, "Stanley Meyer 1992 Interview Incredible lost tapes found"
Fuck the government and the oil companys and thier greed for money and power. Lets all learn this technology and incorporate into our cars so we can be fossil fuel independent!!
give it away to everyone to have... for free... and the second one is yes. one cell but still workin on the eletronics. please see more of my videos as you will have all the information you need to se where im at on progross. ! thanks!!! ~Russ
@ssweeneytodd the smart thing to say is- I'll sell it for a million dollars then as soon as its developed put it on the internet for free and ask for donations- I know I would give hime more than it would cost to buy one. and I bet so would many othere. Greed is the root of evil!!!
The pressurized gas is generated from the original non pressurized air inside. When switched ON the generator then creates the gas, and this gas remains inside the system until requested. Of course he must have put a relief valve in there someplace because you don't want to maintain too high of a pressurized system of Hydrogen!
I designed an Ethanol msnufacturing rig and the patent process is a foot thick pile of red tape, marketing could be done gurellia style yet there is only 15 working hours to the day. I don't know? To much on my plate now.
It's easy to deconstruct H2O to burn in an engine. The problem is to produce enough pure hydrogen to burn. This is where electrical power in to split the H2O, becomes greater than combustion power out. Canadian patent shows how to put in low voltage with little to no amperage and get out high voltage and equally high amperage. The patent is amazingly productive to the point of getting enough power out of a low voltage/amperage input, sufficient to produce vast quantities of hydrogen gas to burn.
Second thought is about the charged particles being Magnetically charged as before discribed and the hydroxy being the sole elements holding any + and - charge independantly.
what you are looknig at with respect to the magnetic particles being formed in the plasma spark thingy. is some type of ozone special gas magnetizing system. Well that is what you said sort of but what I suggest is the magnetic 500G detail is probably Gause figure related.
Hi, nice to hear someone else who,s interested in this fascinating subject. Correct me if I'm wrong because I'm still learning myself, but is'nt the closed loop coil device shown what Stan referred to as a VIC, voltage intensifier circuit, which he used to produce a pulsed voltage to dramatically improve the process of splitting the hydrgen and oxygen.
@ethanolwon200 problem #1, atempting to patent this stuff. Prob#2, getting someone to market it. How to solve this problem? Give it away free as im sure it was originally intenended, make it common knowledge like in star wars where little annikin can build his own vehicle at 8 years old. None of this is really hard, its being hidden. The only way for it to survive now is for it to become common simple knowledge that Everyone KNows! Free KNowledge!, share!
@RobMonty248 - Giving it away for free is the easy pat. Knowing WHO to give to is not. Just giving it to friends is no good. You must give it to people who have the ability, and willingness to spread it further and faster. Like News Orgs not on the Govt payroll.
@AesopsRetreat well, yes, i agree fully yet, what if it just arrived in everyones emails?
Those who could build it probally would just start. I know men with thier own machine shops persay, like stan had. If they received instructions to make this, would you think they may Try? I do. I guess this was my point, that it is sent to everyone. Not just posted somewhere to see it. That they actually receive it in full. Then those who miss it, will be told by those whom didnt. Lots of Ideas 4sure!
They are basically miniature versions of the giant Hadron colliders they use to crash particles into eachother, however, it runs one way in a closed loop creating a sustainable energy source.
I am currently building an eleven plate dry cell hydroxy generator. Gotta start conditioning the plates. No experience btw.
I watched a long seminar I think was done in New Zealand. Stan kept talking about high voltage, low amps, and tech that was already available. I though of the stun gun I got my wife. From 9v battery you get 900k volts and .03 amps. Maybe that combined with pulse wave?? Haven't heard any one else try that. Everyone else keeps preaching amps but Stan didnt. I dunno.
where did you find this papents?? what web site more minds that search this the sooner we can put an end to gas hound ass holes suckin us dry at the pump
Hi Russ,I have been following Your work, Keep it Up ,Great job, Before Stan died I was to the understanding that He was working more on the WATER INJECTOR that worked of the high voltage low amp spark created by the ignition system that ignited the combined hho and noncombustible recaptured gases, does all these patented inventions play a role in the water injector??......Thanks for Your work..Tim
If true, then this vid is revolutionary. My understanding of the Meyers device up to today omitted any knowledge of magnetic particles. Im a layman so this is still very confusing to me. is there a book anywhere about the Stanley Meyers devices? almost sounds like the device taps into the zero point field
Thanks very much Russel for your sharing of this very important and much needed information. Patent download sites load blank pages...were they removed?...any place else to download the patents? Thanks, Wix
@rwg42985 G'day... Interesting clip. However, in the meantime, with Off-The-Shelf components ; you can streamline a Photovoltaic Panel, mount it on your road- vehicle, and unload the Static Systems Drain from the Crankshaft. The 30 watt PV on my 4-Cyl. 4WD 1983 Subaru saves 5.33 Litres per week. It's a third, cut off the unmodified Fuelburn, for me. Search 'SunFoil Science', then watch a few of the clips with 'SunFoil' in the title. DIY. Ciao !
Did you notice the particles were numbered 30 and 40 earlier and in fig. 10 , they are numbered 180 and 185 like they change or something. Great stuff Russ! this coincides with what I have imagined, and just now learning the facts, thx.
As far as i understand (i have never worked on with one) plasma torches and cutters don't require inert or otherwise specified gas. Ambient air at standard shop pressure of 120 psi is sufficient, The magic is in the employment of a Tungsten tip. There is a seemingly credible vid if u seach "homemade plasma cutter" that walks through the assembly and workings of his own, argued to be comparable to a professional model. Very good work my friend,
one of the keys you are looking for, I saw in one of stan meyers videos on the same type of device where he described a gas (mentioned argon specifically) stripped of electrons (Plasma?) in a tube of .. i think he said something about stainless steel... I will look that last part up and post again... hope this helps.
dude, you like really have an AOL email adress?? that's like so 1990 =))
nah just joking man, your info is really very very intruiging to say the least!!! i just found your vids, trying to make time to see all the parts. wonder if you build a device yet. exciting! rip stan meyer <3
Hey just a silly idea that just might work. For the non cunductive nonmagnetic tube use Glass and neon for the gas and ground up magnet (maybe not) for magnetic particals. Hey I don't know but it would look great running a transformer that glows!!!!
If your able to recreate Stan's work you would never be able to share your the generator with anyone. The guys in black suites will come and make you disappear.
Everyone would have to figure it out for themselves and never tell anyone that they don't pay for energy. You could heat and cool your house and take it off the grid and drive from coast to coast, but no one could ever know.
@paulmax72 NO- I THINK, WHAT I BELIEVE THIS GUY THINKS-- GET THE INFO OUT TO SO MANY PEOPLE THAT THEY CANT KILL EVERYONE W/O GETTING KILLED THEMSELVES.
h t t p : / / w w w.m e g a u p l o a d . c o m / ? d = X O W 8 V K G Q
Hey I'd built one of these 14 years ago, I'd used the original Stanley Meyer information packs that he'd used in Auckland New Zealand which included the original WFC Software. Meyer ripped off Tesla in that the frequency matches cell capacitence- Tesla Standing regenerative amplifier except output is H2O GAS!
Dude thats an MHD reactor if its got pipes and thats Tesla's shit again right there.
"This application requires a version of Adobe AIR which is no longer supported. Please contact the application author for an updated version." This appears when I the download was done. I want the video.
Hi Russ! Great vid! I’ve had this idea for a while now which aligns it’s self with what you’re saying here. I have plans to use a ¼” reinforced plastic tubing in which I would add 3/16x1/4 cylinder neos first dipped with Ferrofluid Magnetic Liquid. Prior to sealing off the tubing – add two or more of your starship coils. You’ve proved that there’s allot of punch with these coils that should send the mags flying! See how that works – then add the power coils – or do it all at the same time.
@andywalkerplumber Your welcome, please see parts 2 and 3 on my you tube channel, also check the descriptions in part 3 for a lot more info!!! Thanks, ~Russ
@45:51 that would likely be the introduction of "non combustibles" there are many reasons why I say this, but the primary is to reduce the heat generated by the magnetic VIC coil. Please be careful with your work.
5000guass field, look up arc light for sparkgap vaporization, the gas is a metalic gas, first a vacuum has to be estalished in the chamber, then a arc created to plasmafy the electrodes. You can calc the mass and therefore the moles therefore the charge of all the gas created and you can find the amount of power needed to move it and what can be pulled off of it. A conductive tube would be a dead short in the transformer, drop a magnet down a copper tube.
The part on the drawing that you are pointing at 1:03:14 in to your vid and are wondering what it is, is an ionizer. It charges the ions in the air to one state or another. They are used a lot in the semiconductor industry to help control static electricity.
I just noticed that new ferrofluid is like a liquid right? I bet it would work as a concept using the pipe and pump device you are building - fill it with a ferrofluid and charge it up, flow it through the coils and voila! not a gas but same idea right? do you think it works? you could even go magnet coil magnet coil all the way around. I got to look into the properties of ferrofluid now to see if it won't work!
Stan introduced carbon monoxide, air, and carbon dioxide to turn all hydrogen/oxygen gas to the adjusted fuel burn rate that he wanted. Stan could produce a propane, natural gas, butane, or gasoline burn rate by this method. In example the hydrogen/oxygen gas has a burn rate of approx. 4000 feet / second (dangerous) and by adjusting the burn rate with carbon gasses he could create any type of burnable gas that he wanted. He stated this in one of his videos from the 80s. I tested the gas mods
In the diagram you were questioning if it was an air-core transformer or not, the dashed lines indicate that it wants a ferrite core transformer and the note about toroid means it want a round ferrite core.
Solid lines would indicate that it wanted a laminated iron core.
People, watch Stan's New Zealand series. (watch it again if you must..)
watch?v=ZmxaVOolO-8
If you're lazy, he starts getting into this device in part 8:
watch?v=DvYc7vrnj6I
In part 10 he describes using iron,nickel or cobalt ions + Argon gas.
He also mentions they are going to be releasing this unit, being 18" in diameter and "it's average power draw will be 220 300amp draw capacity.." think about that one for a second...
I think that the magnetized particles could be the hydrogen/oxygen mix but when the gases just come out of the cell they are not magnetized and then they go through a light chamber witch magnetises the gases.
the polarized particles may need the pressure to be properly suspend so they can flow at the best rate. sorta like a rail gun needs the load to be frozen or it just sticks.
chances are you would be able to find the proper pressure if that be that case by monitoring the voltage output at diffrent pressures.
im obviously just slingin my own shit here but i thought i would take a stab at it :^)
in the first patent he has the system for creating his polarized particles. hes ionizing metals in a chamber.
the chamber then feeds into the secondary chamber with the HHO. the purpose of the pressure in the secondary is posibly so that it is more likely to suspend the polarized particles?.
the polarized particles superimpose there charge on the HHO gas also.
the gas is releasd to equliz the pressure, while the polarized particles are likely to stay in the system due to magnetic force
...without the knowledge to make the particles i figured i would try mercury vapour inside.now im thinking burn two neodynuim magnets in the arc,glass could be used for the toroid.laser light could be introduced using high power LED laser of the blue purple kind since it is close to UV and will push the excitation of the particles into a higher state.perhaps frigde gas could be used inside.you mention the steam generator-that was used to keep the water tank from freezing-will send you vid detail
hi Russ,i watched your vid last night,i was aware of the generator but not the particulars such as the device for making the magnetic particles,or how you could use it with HHO,thanx for sharing-i think the things in the middle of the ring are lasers(not the first one with the pump but the later models).meyer spoke about this in one of his lectures.the laser was to provide a static field that improved the efficiency.i have been wanting to try to build one of these since i heard about it but....
Russ, I have never heard of this power generator either... but.. are you suspecting that it powered the spark plug version of his waterfuel system? I was on the understanding he had evolved past the capacitor/transducer "pipes" and started directly exploding the water, as is, right in the chamber.
31:36 "sustained operation" - unreal, i can't believe that language was issued a patent. maybe he had to do it canada for that to read that way. crazy
At 47:00 it occurred to me that the arc chamber would ignite the hydroxy but you could separate he two chambers for the firing sequence with a blanket of nitrogen. Your videos are so interesting. I love the way you explain these drawings and patents. Inspiring. Can't thank you enough! Won't be hard to turn this into a Wordpress post...
each particle being individualy magnatized, example a state were normal hydrogen, and 02 will not recombine to form water due to the wrong atomic numbers created in the individual atoms of hydrogen, and again o2. so if a h6 canot combine with an 03 then you will have sucess. and therfore no added gas is needed after primed.
the plasma is put in a high state of negative charge, and vibration. the magnet he describes may help the higher energy matter enter the accelerator. with N pole magnet in. we now charged either proton or electron, and the force would be to repel, and remaine in a hi state of static vibration?
Notice the low location in the gas chamber. Almost any gas that is heavier than the oxygen or hydrogen would have been collected there and used. Plasma with argon gas?Most of Stans stuff required ionized gas. As far as the arc for plasma Ever seen an old style movie projector(theater type) The cabon rods feed into each other at a predetermined rate and spin at an angle to each other so the ends stay pointed.
Ok. I eat my hat.. chamber 32/155 is supposedly a "vacuated" chamber, meaning, what we are looking for will produce nitrogen as a by-product in the arc... any ideas there?
@bananaphonehome i think by adding the o3 or ozone, the cation will create a new state of h and o with added proton or electons in the atoms orbit. causeing the h6o3 cations needed to create the charged particles. by altering the gas itself. the adding of cation, or added charge to the orbitals of the gas by changing there atomic makeup.
miniturize the coils to injectors and you have HHO and water being injected into the cylinder, at ignition point you create steam which drives the piston down.
the ionized gases are most likely used to help control heat from melting the piston.
your putting to much thought into something actually quite simple.
a lot of the stuff in those patents is completely misleading.
neo magnet particles in the arc may be a bad idea me thinks... nickel *could* make this a "fusion reaction".. doubt that is wanted... (though, maybe it was already?...) vaporized ceramic magnets did cross my mind though.
Waste oil/water mix for magnetized fluid with pressurized electrolysis. Pantone utilizes the plasma arc in GEET fuel reforming. Putting the coil loops after the plasma ionic breakdown of hydrocarbons with create a hot synthetic gas of high pressure to push through the power coils and then to the engine. Ferrofluid is a good idea. Plasma and power under ABHA toroid coils may help the efficienciy. Brings together the work of Paul Pantone, Rodin/Powell (ABHA 72X72 and Meyers.
This would not need to be (and most likely isn't) self sustaining. It only needs to make up enough power to make an HHO system power-able by the alternator/battery system in an automobile, or to make it draw little enough current to make it attractive as a home heat/hot water system, for example. This is what everyone is looking for. The magic bullet to extract energy from an HHO system in a different manner, thus getting by Faraday. Somebody call Copenhagen!!! ;-)
Possibly the arc chamber is pressurized with nitrogen to keep oxygen out of the arc, and to keep HHO from leaking in and going BOOM, when arc crosses the gap. Iron/nickel and many others could be used for the spark gap. Ultra-high frequency/low amps/very high voltage; sounds like a Tesla coil type arrangement. Possibly even the pickup coils, themselves to provide the power for the spark gap?
Something that comes to mind is the ferrous hydraulic fluid that is used in electronically controlled shock absorbers in high end vehicles and military applications.
Thanks for posting this video - I never noticed those coils until you pointed them out. Very cool.
Will be interesting to combine this with the Don Smith work I am doing.....
@EletrikRidesAgain Also,if you had an electric car, there would be no need for HHO. The gas core transformer can be used to directly power an electric device of any kind. :)
This could probably be done with many gases(possibly even compressed air..) but, if this stuff does heat up.. hydrogen could be a good thing.(to a point of course)
As for the pressure.. I don't believe much at all would be required.. only enough for the first cycle/get the ball rolling sort of thing.. a couple psi tops.. (hho auto-ignites somewhere between 80-100 psi, and you will die.)
Well, I just finally got through the 86' patent.. seems to me that at least half the diagram/circuit is not required. I did a couple quick tests, HHO alone definitely doesn't seem to produce. As for the mention of nitrogen, I'm thinking this comes from the "arc chamber" not being purged of regular air first.. as for the "magical" polarized particles I'm thinking steel/iron/possible carbon rods.. (powdered iron cores from circuit boards + "high voltage" dc might be a good place to start.)
It looks like the box at the bottom right of figure #1 is a check valve, I think this may be a water inlet valve, not sure but I think water molecules are polorized and perhaps permanantly... at least as long as the arrangement is H20. This system also needs a fuel source =( water) and an inlet valve, is this just that?
continued from above post: this sounds like maybe Stan was adding another gas to the mix. I doubt there was any ignition spark in the loop or the thing would go boom, remember hho ex/implodes in a vacuum.
pausing at 48.50 the generated hho is electrically charged. I measured 120v dc or whatever inputed to my cell across brass fittings on plastic tubing containing the gas.I believe there have been attempts by some experimenters to extract the voltage via coils around the gas outlet tubes and reinput it to the cell.
@freethisone - yes it will, but it only cuts the half-life by about 97% - were as Hi6O3 gas reduces the half-life by around 99.5%. Hi6O3 is ionized hydrogen and ozone.
This all seems so different from the general HHO gen setup we are usually seeing. It almost seems like the HHO gen is a red herring and you are looking at the real tech behind his work, good stuff Russ! I'm sure his work did involve figuring out how to break down H2O with less current, ie pulse. But did he already have the OU device to drive these different applications??
It's like the creation of a circulating superfluous (i.e. like superconductor but with magnetized "gas"?) material. That flow, kept going with a bias, can be used to draw energy by a "secondary" type pick up.
You are right on point. In an automobile the 12 volts is fed to a coil, primary windings, LOW amps ,.. then the circuit is turned OFF!, inducing high voltage and low amps into the secondary windings. Same thing happens in a STUN GUN. 9volts becomes 50,000 volts. Without a metal core , using rodin coils around plastic thick walled pipe , you should be able to induce into a secondary rodin and achieve the results that you seek. Good luck everyone
When water molecules split into HHO, energy is released. Stan realized this (he commented on it in an old video). Stan tapped the releasing energy and used it to feed the step up transformer coils (this is why he said non magnetic tubing, he didn't want the energy to be absorbed into the walls of a metal pipe, magnetizing the pipe and screwing up the acceleration). Some energy from the secondary coil setup is used to feed the primary feed coil. Self sustaining setup. Very interesting.
@mikepowers420 Its paramagnetic I think that its ionized ozone in high pressure magnetized by magnets accelerated by primary coil in to ring of magnetized plasma ....
@mike powers 420 - Russ, 160 and 162 - the tips of the electrodes are vaporized - turned into monatomic particles that are suspended in the gas. Some monatomic particles are room temperature super conductors and display strong magnetic fields, unlike the same material that is in a in bonded states - like gold, platinum and other atomic structures. A gold ring is non-magnetic, but individual gold atoms have strong magnetic fields.
@rwg42985 a plasma lamp is usually a clear glass orb filled with a mixture of various gases (most commonly neon, sometimes with other noble gases such as argon, xenon and krypton) at nearly atmospheric pressure. They are driven by high-frequency alternating current at approximately 35 kHz, 2–5 kV, generated by a high-voltage transformer. A much smaller orb in its center serves as an electrode.
UltraAltruistism 1 week ago
@rwg42985, The diagram 19:30 you are trying to understand seems to be the process of making the nano sized particles, the same process they use to make colloidal silver and gold probably why it wasnt his patent its already well known. a container of distilled water with 2 silver probes in the water with a current applied from a 9v batter running through the probs releasing silver ions as the material breaks down, look up tutorials on youtube to see it in action good luck hope that helps.
UltraAltruistism 1 week ago
This is literally the biggest display of scientific ignorance i have ever seen on the internet... congratulations
Xero555000 2 weeks ago
U are great, i would like to do the same here in Italy ! we have to change this fucking old way to think !!!
TheBeppez 3 weeks ago
Comment removed
TheBeppez 3 weeks ago
so the magnetic plasma maker could be a welder.
Paul7mac 3 weeks ago
g field is prob gauss. wiki magnetic fields is a measure of flux density.
Paul7mac 3 weeks ago
This is a very "lovely" video. =p
levishort36 3 weeks ago
This has been flagged as spam show
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
steblizz 4 weeks ago
This has been flagged as spam show
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
steblizz 4 weeks ago
Stan Meyers say in a video that there is about 9-10 % of air dissolved in water, so he basically said the particles needed in the accelerator, as nitrogen, can be found in tap water.
steblizz 4 weeks ago
I invented the gasoline powered turtleneck sweater and the wool industry tried to poison me with a bad lamb chop.
oceannavagator 1 month ago
@oceannavagator no that was Steve Martin : )...
bowwowadmin 2 weeks ago
So am I getting this right? It looks to me, from my overview of the patents that he's just using some kind of circular tube with gas in it, and as it passes one side it demagnetizes the particles then shoots them out, then when they hit the other side they're magnetized and shot away again back towards the other side?
KillAllHumans666 1 month ago
I would like to get in touch with Russ Grease.
IwillBeRockStar69 1 month ago
I believe the magnetized particle source is a deionizer. This will take a medium and transform the polarity, creating a specific charge of ions. Look into it, I'm pretty sure that is the device you are looking for.
prestoncrowe19 1 month ago
You proabley already have seen this video on youtube. If not it may help with the answers you are after, "Stanley Meyer 1992 Interview Incredible lost tapes found"
TheShavenmaker 1 month ago
iron filings in water, ferriode fluid.
madedigital 1 month ago
Fuck the government and the oil companys and thier greed for money and power. Lets all learn this technology and incorporate into our cars so we can be fossil fuel independent!!
TeaBagger5000 1 month ago
give it away to everyone to have... for free... and the second one is yes. one cell but still workin on the eletronics. please see more of my videos as you will have all the information you need to se where im at on progross. ! thanks!!! ~Russ
rwg42985 1 month ago
2 quick questions Russ.
If you figure out this technology , what are your plans for it ?
and have you built one of Stan's ss tube fuel cell?
ssweeneytodd 1 month ago
@ssweeneytodd replyed on the above post... ~Russ
rwg42985 1 month ago
@rwg42985 he says he's giving it for free for every one
ThePeopleneedhelp 1 month ago
@ThePeopleneedhelp oh my bad dude typed to wrong person ^ ^
ThePeopleneedhelp 1 month ago
@ssweeneytodd the smart thing to say is- I'll sell it for a million dollars then as soon as its developed put it on the internet for free and ask for donations- I know I would give hime more than it would cost to buy one. and I bet so would many othere. Greed is the root of evil!!!
profetarmageddon 1 month ago
zeitgeist/propaganda/flypaper/staged/disinformation
romale2307 1 month ago
That portion you think is a chamber (on the lower right) is most likely an inlet to feed water back into the system as it runs low.
AesopsRetreat 1 month ago
The pressurized gas is generated from the original non pressurized air inside. When switched ON the generator then creates the gas, and this gas remains inside the system until requested. Of course he must have put a relief valve in there someplace because you don't want to maintain too high of a pressurized system of Hydrogen!
AesopsRetreat 1 month ago
I designed an Ethanol msnufacturing rig and the patent process is a foot thick pile of red tape, marketing could be done gurellia style yet there is only 15 working hours to the day. I don't know? To much on my plate now.
ethanolwon200 2 months ago
Your video is a favorite on Damascus
octaviocurti922 2 months ago
It's easy to deconstruct H2O to burn in an engine. The problem is to produce enough pure hydrogen to burn. This is where electrical power in to split the H2O, becomes greater than combustion power out. Canadian patent shows how to put in low voltage with little to no amperage and get out high voltage and equally high amperage. The patent is amazingly productive to the point of getting enough power out of a low voltage/amperage input, sufficient to produce vast quantities of hydrogen gas to burn.
EdOfTheNorth 2 months ago
Second thought is about the charged particles being Magnetically charged as before discribed and the hydroxy being the sole elements holding any + and - charge independantly.
Lots of testing needs to be done.
As you were!
h2ocommuter 2 months ago
Yes sir nice find!
what you are looknig at with respect to the magnetic particles being formed in the plasma spark thingy. is some type of ozone special gas magnetizing system. Well that is what you said sort of but what I suggest is the magnetic 500G detail is probably Gause figure related.
h2ocommuter 2 months ago
Fascinating video.
TK42138 2 months ago
Hi, nice to hear someone else who,s interested in this fascinating subject. Correct me if I'm wrong because I'm still learning myself, but is'nt the closed loop coil device shown what Stan referred to as a VIC, voltage intensifier circuit, which he used to produce a pulsed voltage to dramatically improve the process of splitting the hydrgen and oxygen.
shaunxk8 2 months ago
Any professionaldrawing should have to scale ratioand material used:which would answer your questions, You cannotsubmit a patent without this info!
ethanolwon200 2 months ago
@ethanolwon200 oh! and ditch the dumass 1940's hat. it takes awayfromallcredibility.
ethanolwon200 2 months ago
@ethanolwon200 problem #1, atempting to patent this stuff. Prob#2, getting someone to market it. How to solve this problem? Give it away free as im sure it was originally intenended, make it common knowledge like in star wars where little annikin can build his own vehicle at 8 years old. None of this is really hard, its being hidden. The only way for it to survive now is for it to become common simple knowledge that Everyone KNows! Free KNowledge!, share!
RobMonty248 2 months ago
@RobMonty248 - Giving it away for free is the easy pat. Knowing WHO to give to is not. Just giving it to friends is no good. You must give it to people who have the ability, and willingness to spread it further and faster. Like News Orgs not on the Govt payroll.
AesopsRetreat 1 month ago
@AesopsRetreat well, yes, i agree fully yet, what if it just arrived in everyones emails?
Those who could build it probally would just start. I know men with thier own machine shops persay, like stan had. If they received instructions to make this, would you think they may Try? I do. I guess this was my point, that it is sent to everyone. Not just posted somewhere to see it. That they actually receive it in full. Then those who miss it, will be told by those whom didnt. Lots of Ideas 4sure!
RobMonty248 1 month ago
Fortunately you are so vague they will not coinsider you a threat to wipe away.
ethanolwon200 2 months ago
thats pretty cool stuff but i'm a finance major i dont know ANYTHING about amps and voltage! i'll talk to my brother hes a computer major
frubbers02 2 months ago
" FLUX CAPACITOR " Cool!!!
aaaflooddrying 2 months ago
They are basically miniature versions of the giant Hadron colliders they use to crash particles into eachother, however, it runs one way in a closed loop creating a sustainable energy source.
CosmicTopSecret 3 months ago
I am currently building an eleven plate dry cell hydroxy generator. Gotta start conditioning the plates. No experience btw.
I watched a long seminar I think was done in New Zealand. Stan kept talking about high voltage, low amps, and tech that was already available. I though of the stun gun I got my wife. From 9v battery you get 900k volts and .03 amps. Maybe that combined with pulse wave?? Haven't heard any one else try that. Everyone else keeps preaching amps but Stan didnt. I dunno.
CravingGod 3 months ago
where did you find this papents?? what web site more minds that search this the sooner we can put an end to gas hound ass holes suckin us dry at the pump
crazyrebel2u 3 months ago
Hi Russ,I have been following Your work, Keep it Up ,Great job, Before Stan died I was to the understanding that He was working more on the WATER INJECTOR that worked of the high voltage low amp spark created by the ignition system that ignited the combined hho and noncombustible recaptured gases, does all these patented inventions play a role in the water injector??......Thanks for Your work..Tim
61066clocks 3 months ago
ush2. com/H2DVD001_detail_page. htm
youtube. com/watch?v=3bEyv1FRVYI&feature=channel_video_title
/watch?v=tRYj23Ond3g&feature=relmfu
/watch?v=DCfu-OWqVI0&feature=related
/watch?v=3JbXLGIL_fc&feature=related
/watch?v=ydEkV-E0mP8&feature=related
all hydrogen, just ideas n other pioneers
charukrsnadasa 3 months ago
If true, then this vid is revolutionary. My understanding of the Meyers device up to today omitted any knowledge of magnetic particles. Im a layman so this is still very confusing to me. is there a book anywhere about the Stanley Meyers devices? almost sounds like the device taps into the zero point field
wotan237 4 months ago
Thanks very much Russel for your sharing of this very important and much needed information. Patent download sites load blank pages...were they removed?...any place else to download the patents? Thanks, Wix
wixies 4 months ago
MIT researchers have observed magnetism in an atomic gas of lithium cooled down to 150 millionths of a degree above absolute zero.
You mentioned nitrogen gas.
The main use of liquid nitrogen is as a refrigerant
Use lithium cooled with nitrogen as the magnetized gas for this system.
italianfighter216 4 months ago
MIT researchers have observed magnetism in an atomic gas of lithium cooled down to 150 millionths of a degree above absolute zero.
You mentioned nitrogen gas.
The main use of liquid nitrogen is as a refrigerant
italianfighter216 4 months ago
This has been flagged as spam show
@rwg42985 G'day... Interesting clip. However, in the meantime, with Off-The-Shelf components ; you can streamline a Photovoltaic Panel, mount it on your road- vehicle, and unload the Static Systems Drain from the Crankshaft. The 30 watt PV on my 4-Cyl. 4WD 1983 Subaru saves 5.33 Litres per week. It's a third, cut off the unmodified Fuelburn, for me. Search 'SunFoil Science', then watch a few of the clips with 'SunFoil' in the title. DIY. Ciao !
WarblesOnALot 4 months ago
Did you notice the particles were numbered 30 and 40 earlier and in fig. 10 , they are numbered 180 and 185 like they change or something. Great stuff Russ! this coincides with what I have imagined, and just now learning the facts, thx.
TheDarkeJ 4 months ago
As far as i understand (i have never worked on with one) plasma torches and cutters don't require inert or otherwise specified gas. Ambient air at standard shop pressure of 120 psi is sufficient, The magic is in the employment of a Tungsten tip. There is a seemingly credible vid if u seach "homemade plasma cutter" that walks through the assembly and workings of his own, argued to be comparable to a professional model. Very good work my friend,
pseegg222 5 months ago
one of the keys you are looking for, I saw in one of stan meyers videos on the same type of device where he described a gas (mentioned argon specifically) stripped of electrons (Plasma?) in a tube of .. i think he said something about stainless steel... I will look that last part up and post again... hope this helps.
Overdrive2385 5 months ago
dude, you like really have an AOL email adress?? that's like so 1990 =))
nah just joking man, your info is really very very intruiging to say the least!!! i just found your vids, trying to make time to see all the parts. wonder if you build a device yet. exciting! rip stan meyer <3
doGruoY 5 months ago
DUDE--- THANKYOU I AM DOWNLOADING
profetarmageddon 6 months ago
Hey just a silly idea that just might work. For the non cunductive nonmagnetic tube use Glass and neon for the gas and ground up magnet (maybe not) for magnetic particals. Hey I don't know but it would look great running a transformer that glows!!!!
otakubiker 6 months ago
If your able to recreate Stan's work you would never be able to share your the generator with anyone. The guys in black suites will come and make you disappear.
Everyone would have to figure it out for themselves and never tell anyone that they don't pay for energy. You could heat and cool your house and take it off the grid and drive from coast to coast, but no one could ever know.
paulmax72 8 months ago
@paulmax72 NO- I THINK, WHAT I BELIEVE THIS GUY THINKS-- GET THE INFO OUT TO SO MANY PEOPLE THAT THEY CANT KILL EVERYONE W/O GETTING KILLED THEMSELVES.
profetarmageddon 6 months ago
did any one help u out?
773steve 9 months ago
This has been flagged as spam show
h t t p : / / w w w.m e g a u p l o a d . c o m / ? d = X O W 8 V K G Q
Hey I'd built one of these 14 years ago, I'd used the original Stanley Meyer information packs that he'd used in Auckland New Zealand which included the original WFC Software. Meyer ripped off Tesla in that the frequency matches cell capacitence- Tesla Standing regenerative amplifier except output is H2O GAS!
Dude thats an MHD reactor if its got pipes and thats Tesla's shit again right there.
ilav1m8y 9 months ago
ther is a video of him explaining all this in his buggy
JoelHarvey1 9 months ago
"This application requires a version of Adobe AIR which is no longer supported. Please contact the application author for an updated version." This appears when I the download was done. I want the video.
AL3XM4ZZ 10 months ago
Comment removed
AL3XM4ZZ 10 months ago
I love what you're doing man. Awesome.
AL3XM4ZZ 10 months ago 2
wow, this is great! thanks for sharing, also this type of particle accelerator device reminds me of concepts belived to cause anti gravity.
tausenti 10 months ago
@tausenti Indeed, be sure to see parts 2 & 3 as well as my building process. Enjoy! ~Russ
rwg42985 10 months ago
Hi Russ! Great vid! I’ve had this idea for a while now which aligns it’s self with what you’re saying here. I have plans to use a ¼” reinforced plastic tubing in which I would add 3/16x1/4 cylinder neos first dipped with Ferrofluid Magnetic Liquid. Prior to sealing off the tubing – add two or more of your starship coils. You’ve proved that there’s allot of punch with these coils that should send the mags flying! See how that works – then add the power coils – or do it all at the same time.
MEMmaker3 10 months ago
The oxygen and hydrogen turns back into water when it returns back into the chamber into the liquid state.
stevegrello 11 months ago
thank you for the canadian patents,.. where did you get those pictures?
andywalkerplumber 11 months ago
@andywalkerplumber Your welcome, please see parts 2 and 3 on my you tube channel, also check the descriptions in part 3 for a lot more info!!! Thanks, ~Russ
rwg42985 11 months ago
Could the non-magnetic pipe be a kind of styrofoam material?
ken25taylor 11 months ago
@45:51 that would likely be the introduction of "non combustibles" there are many reasons why I say this, but the primary is to reduce the heat generated by the magnetic VIC coil. Please be careful with your work.
whiterican74 11 months ago
This has been flagged as spam show
en wikipedia org/wiki/Variable_Specific_Impulse_Magnetoplasma_Rocket
whiterican74 11 months ago
look up 1992 stanley mayer intervew
edgarjesusrodriguez 11 months ago
its prablably made of glass glass will hold electricity like a layton jar
edgarjesusrodriguez 11 months ago
5000guass field, look up arc light for sparkgap vaporization, the gas is a metalic gas, first a vacuum has to be estalished in the chamber, then a arc created to plasmafy the electrodes. You can calc the mass and therefore the moles therefore the charge of all the gas created and you can find the amount of power needed to move it and what can be pulled off of it. A conductive tube would be a dead short in the transformer, drop a magnet down a copper tube.
d3adp001 11 months ago
The part on the drawing that you are pointing at 1:03:14 in to your vid and are wondering what it is, is an ionizer. It charges the ions in the air to one state or another. They are used a lot in the semiconductor industry to help control static electricity.
zgymnast 11 months ago
@zgymnast hm, so the idea of an ion emmiter is a good addition after all.
freethisone 11 months ago
nice work
dreamyear 11 months ago
watch?v=OV-ONpbcHLg
bananaphonehome 11 months ago
Isn't Stanley Meyer a GENIUS taking into account he had no formal education as a scientist?
oscarteos 11 months ago
Isn't Stanley Meyers a GENIOUS taking into account he had no formal education as a scientist?
oscarteos 11 months ago
waiting for your next video.. great info so far!
the1cyrus 11 months ago
was that the device under the spark plug cap .to control the pulse around the ring or squair .
theonethatgoofs 11 months ago
I just noticed that new ferrofluid is like a liquid right? I bet it would work as a concept using the pipe and pump device you are building - fill it with a ferrofluid and charge it up, flow it through the coils and voila! not a gas but same idea right? do you think it works? you could even go magnet coil magnet coil all the way around. I got to look into the properties of ferrofluid now to see if it won't work!
Sugamari 11 months ago
Yo Russ, just seen this and noticed the coils around his device, looks pretty interesting
watch?v=pvLuQOKOVXQ&feature=channel_video_title
keep up the good work
Faith, Hope and LOVE
thedeed23 11 months ago
Stan introduced carbon monoxide, air, and carbon dioxide to turn all hydrogen/oxygen gas to the adjusted fuel burn rate that he wanted. Stan could produce a propane, natural gas, butane, or gasoline burn rate by this method. In example the hydrogen/oxygen gas has a burn rate of approx. 4000 feet / second (dangerous) and by adjusting the burn rate with carbon gasses he could create any type of burnable gas that he wanted. He stated this in one of his videos from the 80s. I tested the gas mods
timothypb 11 months ago
In the diagram you were questioning if it was an air-core transformer or not, the dashed lines indicate that it wants a ferrite core transformer and the note about toroid means it want a round ferrite core.
Solid lines would indicate that it wanted a laminated iron core.
cj691 11 months ago
People, watch Stan's New Zealand series. (watch it again if you must..)
watch?v=ZmxaVOolO-8
If you're lazy, he starts getting into this device in part 8:
watch?v=DvYc7vrnj6I
In part 10 he describes using iron,nickel or cobalt ions + Argon gas.
He also mentions they are going to be releasing this unit, being 18" in diameter and "it's average power draw will be 220 300amp draw capacity.." think about that one for a second...
bananaphonehome 11 months ago
@1:03:26
That is a spark gap of low ionization.
giantkilleroverunity 11 months ago
I think that the magnetized particles could be the hydrogen/oxygen mix but when the gases just come out of the cell they are not magnetized and then they go through a light chamber witch magnetises the gases.
wye1000 11 months ago
Link about magnetism in gas
web.mit.edu/newsoffice/2009/magnetic-gas-0918.html
IsItTrue99 11 months ago
Link about magnetism in gas
IsItTrue99 11 months ago
the polarized particles may need the pressure to be properly suspend so they can flow at the best rate. sorta like a rail gun needs the load to be frozen or it just sticks.
chances are you would be able to find the proper pressure if that be that case by monitoring the voltage output at diffrent pressures.
im obviously just slingin my own shit here but i thought i would take a stab at it :^)
matttatts 11 months ago
in the first patent he has the system for creating his polarized particles. hes ionizing metals in a chamber.
the chamber then feeds into the secondary chamber with the HHO. the purpose of the pressure in the secondary is posibly so that it is more likely to suspend the polarized particles?.
the polarized particles superimpose there charge on the HHO gas also.
the gas is releasd to equliz the pressure, while the polarized particles are likely to stay in the system due to magnetic force
matttatts 11 months ago
...without the knowledge to make the particles i figured i would try mercury vapour inside.now im thinking burn two neodynuim magnets in the arc,glass could be used for the toroid.laser light could be introduced using high power LED laser of the blue purple kind since it is close to UV and will push the excitation of the particles into a higher state.perhaps frigde gas could be used inside.you mention the steam generator-that was used to keep the water tank from freezing-will send you vid detail
m3sca1 11 months ago
hi Russ,i watched your vid last night,i was aware of the generator but not the particulars such as the device for making the magnetic particles,or how you could use it with HHO,thanx for sharing-i think the things in the middle of the ring are lasers(not the first one with the pump but the later models).meyer spoke about this in one of his lectures.the laser was to provide a static field that improved the efficiency.i have been wanting to try to build one of these since i heard about it but....
m3sca1 11 months ago
you can find video on youtube of stan meyers himself explaining this process.
funny though.....i think you already have more views than meyers himself.....
irondmax 1 year ago
Russ, I have never heard of this power generator either... but.. are you suspecting that it powered the spark plug version of his waterfuel system? I was on the understanding he had evolved past the capacitor/transducer "pipes" and started directly exploding the water, as is, right in the chamber.
KyleCarrington 1 year ago
31:36 "sustained operation" - unreal, i can't believe that language was issued a patent. maybe he had to do it canada for that to read that way. crazy
KyleCarrington 1 year ago
Russ gotta watch this it may help you
/watch?v=7aTVu4SJ79w
rudymonte 1 year ago
Looks like HHO gas put in a microwave oven for me.
Any idea what would happen?
dreddy1304 1 year ago
At 47:00 it occurred to me that the arc chamber would ignite the hydroxy but you could separate he two chambers for the firing sequence with a blanket of nitrogen. Your videos are so interesting. I love the way you explain these drawings and patents. Inspiring. Can't thank you enough! Won't be hard to turn this into a Wordpress post...
Sugamari 1 year ago
Awesome... really awesome Dude!
THX so much for your work!
Cheers...
K0W0O0N0 1 year ago
each particle being individualy magnatized, example a state were normal hydrogen, and 02 will not recombine to form water due to the wrong atomic numbers created in the individual atoms of hydrogen, and again o2. so if a h6 canot combine with an 03 then you will have sucess. and therfore no added gas is needed after primed.
freethisone 1 year ago
the plasma is put in a high state of negative charge, and vibration. the magnet he describes may help the higher energy matter enter the accelerator. with N pole magnet in. we now charged either proton or electron, and the force would be to repel, and remaine in a hi state of static vibration?
freethisone 1 year ago
Comment removed
bananaphonehome 1 year ago
Stage 1 Water to Gas Stage 2 Gas ionization Stage 3 Priming ( laser or magnet) Stage 4 Ignition Right from one of stans patents
TheMrblazer320 1 year ago
Notice the low location in the gas chamber. Almost any gas that is heavier than the oxygen or hydrogen would have been collected there and used. Plasma with argon gas?Most of Stans stuff required ionized gas. As far as the arc for plasma Ever seen an old style movie projector(theater type) The cabon rods feed into each other at a predetermined rate and spin at an angle to each other so the ends stay pointed.
TheMrblazer320 1 year ago
@TheMrblazer320 i think the chamber is evacuated , and there is a vacume there to create a diffrence in pressure,
freethisone 1 year ago
@TheMrblazer320 good idea there :)
SCENARIOBABY 11 months ago
Ok. I eat my hat.. chamber 32/155 is supposedly a "vacuated" chamber, meaning, what we are looking for will produce nitrogen as a by-product in the arc... any ideas there?
bananaphonehome 1 year ago
@bananaphonehome i think by adding the o3 or ozone, the cation will create a new state of h and o with added proton or electons in the atoms orbit. causeing the h6o3 cations needed to create the charged particles. by altering the gas itself. the adding of cation, or added charge to the orbitals of the gas by changing there atomic makeup.
freethisone 1 year ago
miniturize the coils to injectors and you have HHO and water being injected into the cylinder, at ignition point you create steam which drives the piston down.
the ionized gases are most likely used to help control heat from melting the piston.
your putting to much thought into something actually quite simple.
a lot of the stuff in those patents is completely misleading.
juggernautxtr 1 year ago
Comment removed
bananaphonehome 1 year ago
also, (probably obvious) but, it seems the primary Must have a magnetic core of some sort... possibly a nice resistor to go with it..
bananaphonehome 1 year ago
neo magnet particles in the arc may be a bad idea me thinks... nickel *could* make this a "fusion reaction".. doubt that is wanted... (though, maybe it was already?...) vaporized ceramic magnets did cross my mind though.
bananaphonehome 1 year ago
cant wait to see you build it.
the1cyrus 1 year ago
Waste oil/water mix for magnetized fluid with pressurized electrolysis. Pantone utilizes the plasma arc in GEET fuel reforming. Putting the coil loops after the plasma ionic breakdown of hydrocarbons with create a hot synthetic gas of high pressure to push through the power coils and then to the engine. Ferrofluid is a good idea. Plasma and power under ABHA toroid coils may help the efficienciy. Brings together the work of Paul Pantone, Rodin/Powell (ABHA 72X72 and Meyers.
dubbuldi 1 year ago
Permanently magnetized particles... How bout a powderized neodymium magnet?
danielvincentkelley 1 year ago
This would not need to be (and most likely isn't) self sustaining. It only needs to make up enough power to make an HHO system power-able by the alternator/battery system in an automobile, or to make it draw little enough current to make it attractive as a home heat/hot water system, for example. This is what everyone is looking for. The magic bullet to extract energy from an HHO system in a different manner, thus getting by Faraday. Somebody call Copenhagen!!! ;-)
FossilFree 1 year ago
Possibly the arc chamber is pressurized with nitrogen to keep oxygen out of the arc, and to keep HHO from leaking in and going BOOM, when arc crosses the gap. Iron/nickel and many others could be used for the spark gap. Ultra-high frequency/low amps/very high voltage; sounds like a Tesla coil type arrangement. Possibly even the pickup coils, themselves to provide the power for the spark gap?
FossilFree 1 year ago
Something that comes to mind is the ferrous hydraulic fluid that is used in electronically controlled shock absorbers in high end vehicles and military applications.
Thanks for posting this video - I never noticed those coils until you pointed them out. Very cool.
Will be interesting to combine this with the Don Smith work I am doing.....
EletrikRidesAgain 1 year ago
@EletrikRidesAgain Also,if you had an electric car, there would be no need for HHO. The gas core transformer can be used to directly power an electric device of any kind. :)
EletrikRidesAgain 1 year ago
p.s.. there is a valve between 32 and 23.. don't strike an arc in pressurized hho, or you will die that way too..
bananaphonehome 1 year ago
This could probably be done with many gases(possibly even compressed air..) but, if this stuff does heat up.. hydrogen could be a good thing.(to a point of course)
As for the pressure.. I don't believe much at all would be required.. only enough for the first cycle/get the ball rolling sort of thing.. a couple psi tops.. (hho auto-ignites somewhere between 80-100 psi, and you will die.)
bananaphonehome 1 year ago
Well, I just finally got through the 86' patent.. seems to me that at least half the diagram/circuit is not required. I did a couple quick tests, HHO alone definitely doesn't seem to produce. As for the mention of nitrogen, I'm thinking this comes from the "arc chamber" not being purged of regular air first.. as for the "magical" polarized particles I'm thinking steel/iron/possible carbon rods.. (powdered iron cores from circuit boards + "high voltage" dc might be a good place to start.)
bananaphonehome 1 year ago
It looks like the box at the bottom right of figure #1 is a check valve, I think this may be a water inlet valve, not sure but I think water molecules are polorized and perhaps permanantly... at least as long as the arrangement is H20. This system also needs a fuel source =( water) and an inlet valve, is this just that?
brigfiche 1 year ago
continued from above post: this sounds like maybe Stan was adding another gas to the mix. I doubt there was any ignition spark in the loop or the thing would go boom, remember hho ex/implodes in a vacuum.
hhotechnology 1 year ago
Russ, this is great!
pausing at 48.50 the generated hho is electrically charged. I measured 120v dc or whatever inputed to my cell across brass fittings on plastic tubing containing the gas.I believe there have been attempts by some experimenters to extract the voltage via coils around the gas outlet tubes and reinput it to the cell.
hhotechnology 1 year ago
Here come the Men In Black. . . . . lol
derman077 1 year ago
32 is a cavitationchamber creating microwaves further vaporizing H2O.
nannerin 1 year ago
32 is cavitations creating microwaves.
nannerin 1 year ago
Comment removed
freethisone 1 year ago
negative ion generator cost only a few bucks.
freethisone 1 year ago
fyi HHO renders radio active material inert without adding radiation to the air..
freethisone 1 year ago
@freethisone - yes it will, but it only cuts the half-life by about 97% - were as Hi6O3 gas reduces the half-life by around 99.5%. Hi6O3 is ionized hydrogen and ozone.
mikepowers420 1 year ago
Im am collecting the materials for a gas core VIC. I should have videos up in a couple of weeks.
advancedhydrogen 1 year ago
i have the video lectures stan gave in new zealand in 1989 explaining this stuff. theres 4 vids about 45 mins each. must upload them
damosapian 1 year ago
@damosapian Do it. Do it now! lol
derman077 1 year ago 5
This all seems so different from the general HHO gen setup we are usually seeing. It almost seems like the HHO gen is a red herring and you are looking at the real tech behind his work, good stuff Russ! I'm sure his work did involve figuring out how to break down H2O with less current, ie pulse. But did he already have the OU device to drive these different applications??
bsibille 1 year ago
some kind of exciter material, almost a carrier, like a carrier frequency but for gas?
bsibille 1 year ago
maybe magnetorestrictive material?
bsibille 1 year ago
It's like the creation of a circulating superfluous (i.e. like superconductor but with magnetized "gas"?) material. That flow, kept going with a bias, can be used to draw energy by a "secondary" type pick up.
bsibille 1 year ago
Guys see Plasma Reactor or Plasma Generator
JustinJJHCS1 1 year ago
It's obvious you couldnt use a conducting pipe or else eddy currents will form.
TheUFOeffect 1 year ago
@TheUFOeffect: When you say magnetized particles what are you talking about? protons or electon sub atomic particles or polar molecules?
TheUFOeffect 1 year ago
You are right on point. In an automobile the 12 volts is fed to a coil, primary windings, LOW amps ,.. then the circuit is turned OFF!, inducing high voltage and low amps into the secondary windings. Same thing happens in a STUN GUN. 9volts becomes 50,000 volts. Without a metal core , using rodin coils around plastic thick walled pipe , you should be able to induce into a secondary rodin and achieve the results that you seek. Good luck everyone
merlinspower 1 year ago
Thanks for the work on this.
hydrophoenixx 1 year ago
Sorry. Found the download link. Just getting really excited about this.
hydrophoenixx 1 year ago
Where can download these patents? I don`t see the links.
hydrophoenixx 1 year ago
When water molecules split into HHO, energy is released. Stan realized this (he commented on it in an old video). Stan tapped the releasing energy and used it to feed the step up transformer coils (this is why he said non magnetic tubing, he didn't want the energy to be absorbed into the walls of a metal pipe, magnetizing the pipe and screwing up the acceleration). Some energy from the secondary coil setup is used to feed the primary feed coil. Self sustaining setup. Very interesting.
biggysground 1 year ago
crazy batshit stuff.
Get reproducing. This is a golden olive branch being held out.
gedw99 1 year ago
Russ maybe particles are ozone. its O3, oxygen triangle particle made by plasma arc... this is
jaculat 1 year ago
@jaculat - ozone can not be magnitized - more than likly the particles are carbon or iron.
mikepowers420 1 year ago
@mikepowers420 Its paramagnetic I think that its ionized ozone in high pressure magnetized by magnets accelerated by primary coil in to ring of magnetized plasma ....
jaculat 1 year ago
now we gotta put in the particles.
camelsonhorizon 1 year ago
maybe you could use pex tubing to wrap the coils around
Iseekoutthetruth 1 year ago
you should check out this guys videos StanleyMeyerVideos he has every video made by meyers
Iseekoutthetruth 1 year ago
This is by far the best discussion anyone has started ,
You are right efficiency isnt an issue ...
Coil drivers !
High temp plastic !
low volts in high volt out !
pinemontgo 1 year ago
@pinemontgo - if configured in the right fashion - it not only steps up volts, it can step up amps at the same time.
mikepowers420 1 year ago
What keeps the magnetic particles correctly directeded so that a coil can accelerate them in the same direction?
Anything magnetised has two poles.
Magnetised particles would not survive in a plasma.
Maybe not magnetic - but electronically charged?
Electrically charged particles are magnetically deflectable back through the system and not burnt.
Fig 10. Are rods 160+162 at a potential wrt 155?
Is the output tube a spiral which will amplify particle flow output at one specific frequency?
z1zaz 1 year ago
@z1zaz
I meant the spiral producing a peak voltage out at one specific frequency - to drive the resonant H2O2 generator.
z1zaz 1 year ago
Time to build it .
koneye 1 year ago 7
Russ my friend, it's downloading right now, and thank you.
I'm also posting this one on my Facebook, plus forwarding to all my HHO friends.
Dude, once again - thank you.
Peace.
Mike.
mikepowers420 1 year ago
@mike powers 420 - Russ, 160 and 162 - the tips of the electrodes are vaporized - turned into monatomic particles that are suspended in the gas. Some monatomic particles are room temperature super conductors and display strong magnetic fields, unlike the same material that is in a in bonded states - like gold, platinum and other atomic structures. A gold ring is non-magnetic, but individual gold atoms have strong magnetic fields.
mikepowers420 1 year ago