I managed to get iAtkos v7 working, and I assume other distros would be similar, simply by booting the computer over and over again until the installer loaded. Boot flags like -v -cpus=1(or 2), -x, or any others didn't seem to make a difference. From memory I had speedstep and the dual core option enabled in bios. I'm posting from a 1520 hackintosh at the moment, once you get lucky and the installer loads Osx loads everytime and works great
what do you use to install your drivers? kext helper? I'm not having much leuck with that. Where can i get direct links for 10.5.2? Eithernet, wireless nor audio work for me.
Can u help me i really need to install OsX It doesn't install on my computer heres what i did: I burned kalyway and iatkos with amd patch to a dvd then i restarted my pc with dvd then when the darwin boot screen comes up i went on verbose mode and some command loads up and then it restarts my computer. I tried this lot of time i even used -f, -x, -s and entered it normally These are my specs: Compaq Presairo CQ50 AMD turion rm-70 3GB memory 250GB HD Nvidia geforce 8200M Any Solutions?
hey! try this out. make sure ur cpu does support atleast sse2. if its support try a new dvd iatkos for amd. u can find in minova. and check the one post downloaded. if u already have it i mean if u are sure its the one for ur pc, coppy it with very slow dvd writer speed. 2x good enough. after all reset ur bios setting. take out battary and put it back. set ur bios. defaulth. but check usb controller on. and set ur boot loader to cd room secondary boot loader should be ur hard disk.
and format ur hard disk to fat with xp cd. when the format finish before its load the setup files u should power off pc. dont let it load any files. when the format say %100 done its will start load files. u should be really quick. after all its should work. first let cd room boot. if doesnt work try -v. than let me know if its work or not. maybe find other way. thanks
hi can u help me.?? i try to intisal iatkos 5i but when i boot it from dvd apple logo shows up but after 1 minute on apple logo shows no entry sign. and keep like that. i try to set bios settings doesnt work. my pc is intel p4 asus mother board, p4 2.40 cpu. sis 964 chip set. ide hard drive. what is wrong please someone help..... thanks
yes i did:) the motherboard does not support iatkos5i so the best way is find another motherboard. intel cipsets are best for this products. or sis or u can try other mac os x not iatkos. kelyway or ideneb. i already did it on many pc. even now i do it case by case for who wants it. :)
u should just use uphuck 10.4.9 it works great on most p4's. plus ur cpu is sse2 and u would be better off with tiger cause it dosent rely so much on sse3 commands. I mean it will still work but ur not gona get the performance u want.
Hi man I am trying to do exactly the same but my dell inspiron 1420 intel dual centrino doesn't success the installation on a vmware workstation, would u give me a hint please!!
Hy! Glad to see that u made it! :) I have the same notebook like u. I will use iATKOS v4i (10.5.4 Leopard DVD). Do u think it will work with this version? So far I've done 12 installations, but none succeeded. The last one was with Kalyway 10.5.2 and always blocked at IOAPIC.
ya right dude, show me a mac between now and 2007 that i can get for under $300. You Can't! Plus it's awesome to buy a couple hundred dollars in computer hardware and just install OS X on it while laughing at mac buyers. All you folks are paying for is that little white apple on every case they make. Mac's are alienware without the performance.
I would not buy Mac for Notebook. No way, is far too expensive. Anyhow, I do have an iMac (Desktop Mac Model) quite excellent computer at a good price, which gave me hours of free virus and not restarting as my last PCs. Anyways, i am trying to learn this software to installing it in my new Notebook. Vista sucks big time!
when i boot it up, the mac logo come's up and the little thing underneath circling but thn it just stays there, when i boot it with diagnostic messages it says unknown sigsigz code0 or something like tht and wont boot up..help please
hy, i have a samsung r60plus with intel core 2 duo, ati x1250,sata 160gb,2gb ram an i have install ideneb 1.3(10.5.5) and he restarts when starts booting... what distribuson is indicate for my laptop,can't someone tell me? kalyway / iATKOS / iDeneb????
* Install Method iATKOS v2i 10.5.2 * Dual boot with XP * Basics are working - will report back when fixed sound and video. * Sound fixed - went round in quite a few circles but IN and OUT working
In other words, iAtkos is the only form of leopard that will work on your laptop so ignore kalyway/iDeneb/others because they are guaranteed to not work.
i hope this helps, trying to get Leo4Allv2 to work on my tx2000z :D downloading....
i managed to get leo4allv2 working on my hp tx2000 today but there are too many things that don't work with it. so i might just fiddle around with it and think about getting the real thing.
* Install Method iATKOS v2i 10.5.2 * Dual boot with XP * Basics are working - will report back when fixed sound and video. * Sound fixed - went round in quite a few circles but IN and OUT working
If this happens when you're trying to boot from CD, it means that you CD is not good, or look at insanelymac for this error, I think it's because of your CD drive. Try to enter -v as startup option.
Hi, i have recently installed ideneb on my sony vaio VGN-NR10E/s the instalation works fine, i installed it on a partition and changed the file type to "journeled" or watever u call it in the customize menu i choose the nessersary drivers, and after the thing reboots, i see the apple logo for about 30 seconds then i se a blue screen for like 2 seconds then the screen goes all checkered with lines all over it, could u suggust a fix to this?
question: can u install Kalyway 10.5.4 without having to install anything else before it, cuz i downloaded it but i keep getting errors on my Inspiron 6400 :(
Having the same problem as AllAboutLukeM. It gets to the apple loading screen and just hangs. I let it go for half an hour once and nothing. Just keeps spinning. Any tips? Thanks.
Hiya, I need some help to be honest. I am installing kalyway and it is stuck on the apple screen with a little loader below forever. It doesnt move. I have a high spec laptop. 160GB HD, 1GB RAM ect. Thanks
hey man im haveing a hard time with this iv tryed kalway and iatkos and they both give me the same problem it will show the apple boot screen, the thingy will spin for like 30sec then it will show a error screen any help?
Hi, I'm glancing over at your brilliant installation, but when installing it on my 1520 i used the iatkos version. What did you do to get the sound to work, or did it work right after the install? Is there somewhere you can download a file to get it to work right. Any help is much appreciated.
I've seen the "how to" and everything, but i got my dell with Linux Ubuntu, how am i supposed to install it dual boot?!? if i could direct me to any good guide it would be of great help!! THX
I'm so glad to see this. Did you have to bend over backwards to get anything going? Does it have any problems or does it work just like a MacBook? I think alot of people would appreciate it if you made a how-to guide.
so if i install idene webcam and microfon will not work
teo3city 1 month ago
@teo3city The webcam was working as you can see on the video, but the microphone did not. (I did it in 2009, so I guess it's totally different now!).
zikman01 1 month ago
hey disk utlility wont recognizes my hdd
my hdd are not show in disk utility...
plzzz helpp
ankit866 4 months ago
@ankit866 you have to partion it.
TekTut0rials 2 months ago
@TekTut0rials i do it
still same prblm
ankit866 2 months ago
im having a prolem cant find my destination but my harddrive is hooked up
m1k3l0v3sm4ck3nz1e 4 months ago
Need Username and password
zikman01 . free . fr / Bordel / install_leopard
der615 7 months ago
This has been flagged as spam show
dualbootmacandwindows.blogspot.com.........go ther...get ur answer..
Shiva45670 9 months ago
hi, i installed now the iDeneb v1.3 10.5.5 but now this have password on the user, how i can change or remove the password???
tks
btz17 11 months ago
I'm trying to install it and I just get stuck on the apple logo loading screen. I'm installign on Dell inspiron 1420 from the iso burned onto a cd
hondasarecool1 1 year ago
my would let ideneb to be installed but when it restarted, it wouldn't work. stuck up to apple logo and nothing happened, why? any help?
PYourSong 1 year ago
how to boot on original vista ??
appl3iph0n3 1 year ago
Heyy (: if you wont Mac's and other cool prizes like xbox's
Just ask me for an invite to lockerz.
if you dont beliveve me look around youtube for videos of awards people have recieved
Just pm with your email for and invite(Y)
caiden59 1 year ago
how did u boot off the kalyway distro?
what command did u use?
mine gets stuck at ioapic: version 0x20
saleh94 1 year ago
Sorry, it was a long time ago I did this ( One year ago !!! ). I cant remember.
Go to the website insanelymac its very usefull
zikman01 1 year ago
I managed to get iAtkos v7 working, and I assume other distros would be similar, simply by booting the computer over and over again until the installer loaded. Boot flags like -v -cpus=1(or 2), -x, or any others didn't seem to make a difference. From memory I had speedstep and the dual core option enabled in bios. I'm posting from a 1520 hackintosh at the moment, once you get lucky and the installer loads Osx loads everytime and works great
mullacy2 1 year ago
Ghfzzz...
I installed iDeneb 1.3 (10.5.5 Leopard), and I have no sound, no wi-fi and I'm stuck with 800x600 resolution.
HELP!
iEzerith 2 years ago
Do i have to install something like a bootloader or does it automaticly instal a bootlader ??
anel115 2 years ago
bootload is installed automatically with kalyway and iAtkos
zikman01 2 years ago
what do you use to install your drivers? kext helper? I'm not having much leuck with that. Where can i get direct links for 10.5.2? Eithernet, wireless nor audio work for me.
BoboVicus 2 years ago
read video description pls ;)
zikman01 2 years ago
Are you watching porn in the background?
crait 2 years ago
xD nooooooooooooooooooooooo :p
zikman01 2 years ago
rlly? :D
michaelwidmer12 2 years ago
Lol, it's a french TV show :p
zikman01 2 years ago
i dont trust ya :D
michaelwidmer12 2 years ago
Yeah, I got a Dell Inspiron E1705, and was thinking about putting iDeneb or kalyway on it, how do you think it would work?
Null81 2 years ago
The only problem i had with the 1520 was the unit not fully powering down after installing a graphics driver
v8nman 2 years ago
Yes I had the same problem
zikman01 2 years ago
everything works?
changolucky 2 years ago
very nice!!!!
5 stars and subscribed!!!
tutorialsandhacks 2 years ago
On my sony vaio vgn-n31S all I get is that darwin bootloader saying system config file /com.apple.boot.plist is not found and I'm stuck :((
hdrevolution123 2 years ago
Do you think it will work on dell inspiron 1525 laptop?
acozz1 2 years ago
same architecture. I'm sure of it
hdrevolution123 2 years ago
jak1594 2 years ago
hey! try this out. make sure ur cpu does support atleast sse2. if its support try a new dvd iatkos for amd. u can find in minova. and check the one post downloaded. if u already have it i mean if u are sure its the one for ur pc, coppy it with very slow dvd writer speed. 2x good enough. after all reset ur bios setting. take out battary and put it back. set ur bios. defaulth. but check usb controller on. and set ur boot loader to cd room secondary boot loader should be ur hard disk.
dramen555 2 years ago
and format ur hard disk to fat with xp cd. when the format finish before its load the setup files u should power off pc. dont let it load any files. when the format say %100 done its will start load files. u should be really quick. after all its should work. first let cd room boot. if doesnt work try -v. than let me know if its work or not. maybe find other way. thanks
dramen555 2 years ago
Try lawlessPPC or Ideneb.
mazor13 2 years ago
i got it now? but...have u update it? is it possible?
please tell me
lloyd789456 2 years ago
hi can u help me.?? i try to intisal iatkos 5i but when i boot it from dvd apple logo shows up but after 1 minute on apple logo shows no entry sign. and keep like that. i try to set bios settings doesnt work. my pc is intel p4 asus mother board, p4 2.40 cpu. sis 964 chip set. ide hard drive. what is wrong please someone help..... thanks
dramen555 2 years ago
I haven't p4 so I can't help you, please search on google
zikman01 2 years ago
same problem! did you fix it?
jonsutubechannel 2 years ago
yes i did:) the motherboard does not support iatkos5i so the best way is find another motherboard. intel cipsets are best for this products. or sis or u can try other mac os x not iatkos. kelyway or ideneb. i already did it on many pc. even now i do it case by case for who wants it. :)
dramen555 2 years ago
i want it haaha
jonsutubechannel 2 years ago
u should just use uphuck 10.4.9 it works great on most p4's. plus ur cpu is sse2 and u would be better off with tiger cause it dosent rely so much on sse3 commands. I mean it will still work but ur not gona get the performance u want.
mazor13 2 years ago
how do you update? i have kalyway 10.5.2
i want 10.5.6 and .7 eventually
can you make a video? on how to do it?
jonsutubechannel 2 years ago
hello every1
click on my username n you will see dual boot leopard - windows xp on my AMD PC
efand 2 years ago
Hi man I am trying to do exactly the same but my dell inspiron 1420 intel dual centrino doesn't success the installation on a vmware workstation, would u give me a hint please!!
chr1so 2 years ago
I get the ideneb image and the rainbow cursor but it get stuck there, do u know what would be happening?
chr1so 2 years ago
You cant install it on VMware.
planetjackerz 2 years ago
Hy! Glad to see that u made it! :) I have the same notebook like u. I will use iATKOS v4i (10.5.4 Leopard DVD). Do u think it will work with this version? So far I've done 12 installations, but none succeeded. The last one was with Kalyway 10.5.2 and always blocked at IOAPIC.
ForMariuz 2 years ago
try Kalyway 10.5.1 and update to 10.5.6 after installation
zikman01 2 years ago
did you update normally through the Mac OSX system updater or did you use a special method?
benceab 2 years ago
normally
zikman01 2 years ago
how do make dualboot XP and iDeneb v 1.4?
AppleiLucas 2 years ago
google is your friend
zikman01 2 years ago
thanks :/
AppleiLucas 2 years ago
Comment removed
AppleiLucas 2 years ago
This comment has received too many negative votes show
get a mac...dudes....its not expensive....
rossel0203113 2 years ago
ya right dude, show me a mac between now and 2007 that i can get for under $300. You Can't! Plus it's awesome to buy a couple hundred dollars in computer hardware and just install OS X on it while laughing at mac buyers. All you folks are paying for is that little white apple on every case they make. Mac's are alienware without the performance.
xNIAx1 2 years ago 2
@xNIAx1 fix tht u get free apple stickers with iphones lol
Callum2464 1 year ago
in Europe it's minimum 950 euros for a macbook and for the same hardware as me it's 1500 euros
zikman01 2 years ago
I would not buy Mac for Notebook. No way, is far too expensive. Anyhow, I do have an iMac (Desktop Mac Model) quite excellent computer at a good price, which gave me hours of free virus and not restarting as my last PCs. Anyways, i am trying to learn this software to installing it in my new Notebook. Vista sucks big time!
uzapuca 2 years ago
VIsta sucks it's true.
I use XP only for games
Now I have a netbook MSI wind with Leopard, and OSX is the best on this computer
but i'm a student and an Mac still
too expensive for me !!
zikman01 2 years ago
Are you fuckin kidding me?
Isnt a mac expensive. I mean its worth the price but, its expensive.
Koffmovies 2 years ago
when i boot it up, the mac logo come's up and the little thing underneath circling but thn it just stays there, when i boot it with diagnostic messages it says unknown sigsigz code0 or something like tht and wont boot up..help please
konamattrules 2 years ago
hy, i have a samsung r60plus with intel core 2 duo, ati x1250,sata 160gb,2gb ram an i have install ideneb 1.3(10.5.5) and he restarts when starts booting... what distribuson is indicate for my laptop,can't someone tell me? kalyway / iATKOS / iDeneb????
RGL2005 3 years ago
sorry but how you update it to 10.5.6? :S
Leon123233223 3 years ago
10.5.6 sucks i would do it if i where you
atleast for me iam one instal iatkos 5 i have iPC 10.5.6 now
SultanTSK 3 years ago
can it be updated or will updating it brick the install?
skilo837 3 years ago
it updates fine
vahnx1337 2 years ago
* Install Method iATKOS v2i 10.5.2 * Dual boot with XP * Basics are working - will report back when fixed sound and video. * Sound fixed - went round in quite a few circles but IN and OUT working
In other words, iAtkos is the only form of leopard that will work on your laptop so ignore kalyway/iDeneb/others because they are guaranteed to not work.
i hope this helps, trying to get Leo4Allv2 to work on my tx2000z :D downloading....
DaveMcKerron 3 years ago
oh, if you already have this fixed, my bad, but this may clarify things for other users :D
DaveMcKerron 3 years ago
Yes for inspiron 1520 iATKOS is the best !
zikman01 3 years ago
i managed to get leo4allv2 working on my hp tx2000 today but there are too many things that don't work with it. so i might just fiddle around with it and think about getting the real thing.
DaveMcKerron 3 years ago
hey, do you know if sound wikk work on my 1520 with IATKOS 5i? I thinkit's Mac OS X 10.5.5
isthisnickvalid 3 years ago
I can confirm this. I tried Kalyway 10.5.2 on my Inspiron 1520 and it didn't work at all.
Farthen08 3 years ago
* Install Method iATKOS v2i 10.5.2 * Dual boot with XP * Basics are working - will report back when fixed sound and video. * Sound fixed - went round in quite a few circles but IN and OUT working
DaveMcKerron 3 years ago
What's the gfx card in that, i have a 1520 with the x3100.
chmoduk 3 years ago
yeah :) i got kalyway 10.5.2 torrent and dont works
iDeneb and iAtkos v4a work :P for my AMD
Leon123233223 3 years ago
kalyway never works on Pcs only with donate it works normaly
Leon123233223 3 years ago
WTF ????
zikman01 3 years ago
I used iATKOS V4 because kalyway 10.5.2 dont work !!
zikman01 3 years ago
Ok you used kalyway ??
zikman01 3 years ago
If this happens when you're trying to boot from CD, it means that you CD is not good, or look at insanelymac for this error, I think it's because of your CD drive. Try to enter -v as startup option.
xavked 3 years ago
Hi, i have recently installed ideneb on my sony vaio VGN-NR10E/s the instalation works fine, i installed it on a partition and changed the file type to "journeled" or watever u call it in the customize menu i choose the nessersary drivers, and after the thing reboots, i see the apple logo for about 30 seconds then i se a blue screen for like 2 seconds then the screen goes all checkered with lines all over it, could u suggust a fix to this?
XgamerunlimitedX 3 years ago
try to reinstall and don't check driver, I think it's because you choose an incompatible video driver.
zikman01 3 years ago
ahhmm... do iATKOS on intel requires some driver or it uses the windows driver... please help
dorotdotay 3 years ago
You can't use windows drivers on leopard
zikman01 3 years ago
and why the fuck the reoply not goes where it belongs
nouShit 3 years ago
Sometimes reply bugs
zikman01 3 years ago
can you help me i hav this same problem its loads n its sends me back to restart the pc im goni to do a video of it
drzjan 3 years ago
you probably choosed the wrong kernel, or selected them all, if u re on AMD u shold choose the compatible kernel
nouShit 3 years ago
Can you install the Mac updates after installing Leopard?
dinasaur2 3 years ago
Not directly from Software Update but you can use combo updates
zikman01 3 years ago
Non I just bought an Hp pavillon with a Core 2 Quad Processor..
I'm quite sad about it, i burned the Kalyway cd and tried to install it but just after Darwin x86 is loading my computer reboots.
Chuckbourdeau18 3 years ago
Try iATKOS or iDeneb
zikman01 3 years ago
it reboots a the white screen for me :(
Chuckbourdeau18 3 years ago
Amd proc ?
zikman01 3 years ago
question i have a getway e4100 p4 how can i put mac 10.5.4 on it please help give me a link if you can please
drzjan 3 years ago
Yes you can, look at this, a member have the same pc as you :
forum . insanelymac . com / index.php ? showtopic = 121965
(remove spaces)
zikman01 3 years ago
mmm i cant find the member wit the same computer :(
drzjan 3 years ago
On this link a member wrote that it works, you can install leopard on your pc ;)
zikman01 3 years ago
question: can u install Kalyway 10.5.4 without having to install anything else before it, cuz i downloaded it but i keep getting errors on my Inspiron 6400 :(
Feircejaguar 3 years ago
No but you can directly install iDeneb 10.5.4
zikman01 3 years ago
thanks
IHATESCHOOLMAN0998 3 years ago
dude i have a 1525 laptop can you tell me how you did that
IHATESCHOOLMAN0998 3 years ago
there are many tutorials, look at the links in my description or try google ;)
zikman01 3 years ago
I have the same problem you are having on a 1525. Did you ever resolve this issue?
ramiritoredux 3 years ago
Or does the boot screen spinning thing hang for a long time on the first boot?
ramiritoredux 3 years ago
with what version ? 10.5.1 10.5.2 ?
I don't know what is your problem !
On the first boot you can wait 2 minutes on the boot screen
zikman01 3 years ago
does the internal wifi work
zenrana99 3 years ago
Yes
zikman01 3 years ago
Having the same problem as AllAboutLukeM. It gets to the apple loading screen and just hangs. I let it go for half an hour once and nothing. Just keeps spinning. Any tips? Thanks.
mattgonzales4000 3 years ago
Hiya, I need some help to be honest. I am installing kalyway and it is stuck on the apple screen with a little loader below forever. It doesnt move. I have a high spec laptop. 160GB HD, 1GB RAM ect. Thanks
AllAboutLukeM 3 years ago
hey man im haveing a hard time with this iv tryed kalway and iatkos and they both give me the same problem it will show the apple boot screen, the thingy will spin for like 30sec then it will show a error screen any help?
2DGUNNY 3 years ago
What's your computer ? is it on dvd boot or HD boot ?
try to boot this option :
-v
It shows errors.
zikman01 3 years ago
the error is b0 error
2DGUNNY 3 years ago
ok, maybe you install GIUD drivers and are using MBR disk ?
zikman01 3 years ago
i dont know what any of that means im such a noob xD
2DGUNNY 3 years ago
just reply to my comment i dont wanna post my email
aerogineer 3 years ago
My bios version : A07 (02/03/2008)
All settings to default :
SATA Operation : ATA
Multi Core Support : ON
zikman01 3 years ago
dude can you email me your bios settings? because im about to do it on my older inspiron but i need the bios
aerogineer 3 years ago
hiii! were your network card the Intel PRO/100 VE?
If yes, i need to buy a compatible one?
or can i find the driver for it?
thank you
matheuslotero 3 years ago
My network card is a Broadcom 440x and works out of the box, I don't know for your card, but try to install and look if it's detected by OSX.
zikman01 3 years ago
how do you get the sound driver??????
vicdeldoc 3 years ago
Please read the video description there is a like -> "For sound on iATKOS "
zikman01 3 years ago
damn the boot menu doesnt show up after i installing it, help!!!!!!!!!!!
sakuranbo888 3 years ago
Did you install iATKOS or KALYWAY ? Do you have an error ?
zikman01 3 years ago
sweet.. dling for my vostro 1500 wif same settings as ur laptop :)
sakuranbo888 3 years ago
Hi, I'm glancing over at your brilliant installation, but when installing it on my 1520 i used the iatkos version. What did you do to get the sound to work, or did it work right after the install? Is there somewhere you can download a file to get it to work right. Any help is much appreciated.
Thanks
TeeravX 3 years ago
I'm on iATKOS 2.0i now, and it works better than kalyway, for example my wifi card works at 100% with airport.
For sound, please look at the link I added in the video's description, with this driver sound works great !
zikman01 3 years ago
look the video description, there is 2 links for drivers
zikman01 3 years ago
can you pint for me where to get the drivers from ??
and what are the needed drivers ??
Oh one more thing . . . do u need to but the vanellakernal ?? and how do you do that ??
screenertub 3 years ago
look the video description, there is 2 links for drivers
zikman01 3 years ago
can you help ??
i have the same laptop but the installtion would not start ??
is there something that i have to do with the bios ?? a command ??
and by the way . . . how did you setup your drive ??
i have the kalyway leopard 10.5.2
Thanks
screenertub 3 years ago
I saw your video, I you wait 2minutes the install doesn't progress ?
zikman01 3 years ago
i waited for 15 minutes and 30 minutes . . . nothing happens ??
what shoud i do ?
screenertub 3 years ago
Ok,
My Bios : A07 (03/02/08)
And Sata is ATA
I saw people who have the same problem but I didn't view any solution...
zikman01 3 years ago
i have the same bios and the same sata
??
then if its like this . . . it would be the copy of the DVD
where did u get yours from ?
screenertub 3 years ago
thanks alot man . . .
i have moved to IATKOS v2.0i it starts the installer
i just have one more problem . . . i cant shrink the partition he he even with paragon partition manager 9.0 . . ."some kind of error"
i will have to reinstall vista . . . lucky me
screenertub 3 years ago
I've seen the "how to" and everything, but i got my dell with Linux Ubuntu, how am i supposed to install it dual boot?!? if i could direct me to any good guide it would be of great help!! THX
omarzohdy 3 years ago
Ok, I think Darwin bootload can load OSX or Ubuntu because it lists all your partitions.
Or you can install GRUB but I don't know if it can load OSX.
I don't found guide for dual boot oxs/linux on hackintosh, only on "real" mac and it's not the same softs
zikman01 3 years ago
You can use GRUB to boot any OS you want to. That's the beautiful thing about it. It's undiscriminating. It'll boot anything without question.
leodime 3 years ago
Great, THX to Both I'll Surely try it out!!
omarzohdy 3 years ago
i have the same inspiron, how did you did it? i have a error after run darwin, please help me how did you did it
thevenezuelan 3 years ago
Please look at the link in the video informations, I have put all the installation screens
zikman01 3 years ago
I'm so glad to see this. Did you have to bend over backwards to get anything going? Does it have any problems or does it work just like a MacBook? I think alot of people would appreciate it if you made a how-to guide.
leodime 3 years ago
Works perfectly like MacBook.
For How to:
Please look at the link in the video informations, I have put all the installation screens
zikman01 3 years ago
Cool. THanks a ton.
leodime 3 years ago
I have a 1520 and cant install cos i get stuck on a IOAPIC error when trying to boot Kalyway.
Did you have to change you BIOS??
acdcfiend 3 years ago
No, I changed nothing in bios...
zikman01 3 years ago
the long wait?....
tangente111 3 years ago
Yeah, now boot in 30s with 10.5.2 update
zikman01 3 years ago
yess now i need to know what to download
im a little confused with this because is my first time trying it and going in this page
drzjan 3 years ago
There are many How To, go to google ;)
You have just ton DL an ISO and install !
zikman01 3 years ago