I have called Lighthorse Technologies for an RP SMA male connector and they tell me that it will not work with the rg59 thin cable antenna made by Phillips.
@sunshine4lb I have called Lighthorse Technologies for an RP SMA male connector and they tell me that it will not work with the rg59 thin cable antenna made by Phillips.
@retrorecycler ......yes dear i think ur rite.......i dont know more about this.....but t wires we have in the wifi antena is a copper wire with silver coating on it ...........n have high n good transmision of data............now i had left the job of wireless networking .....so t most of t things i had forgot
Can sum1 tell the exact connector/adpter that's compatible enough to connect a pci card to a cable tv coaxiel cable? I shopped arounf several stores & no one knew what an rp-sma male connector was. Can anyone tell me the specific aadpter name needed to connect these 2 items? e.g.-is it n male to n malae sma or something like that?
ok i can not find a connector end, radio shack has no 5j-58 part, nor do they know of any connector that will work for this, if any one knows please list a company and part number so i can get this connector
Because I used to work alot with mc27's ( advanced ones) But a normal or advanced one, the TX/TS must have a 1 on 1 ground to the antenna if it was out of range we could blow up our mc27 ( like portophones). So i'm most likely worried u will kill you routers transmitter with this idea.
Rumor is that you can, so correct me if I am wrong. How come you dont use the wire to connect with a satellite dish (with some modifications of course)???
Well true, you can modify a satellite dish to send signals but this is not the problem, the other end should be also rigged to send long distance signals, just picture it!
this is bunch od c*ap! first of all u don't use tv cable cuz it has 75 Ohms impedance, and the loss increases, second if u want u use a cable then it's 50 Ohms RF cable with low loss, on 2 meter 1db loss, on 50m of cable u would have 25dB loss which eaquales cr*py SIGNAL...if u want a wifi boost buy a 15dB or more yagi antenna for 2.4GHz, second author is trying ti imitate an omni antena which has to have precise space between coils, and a precise lenght of cable to work on wifi channels
We try to modify things found at home. To limit cost. If thats not the case just go to any tech shop and order a ready made wifi booster for less then $70.
then u had to made how to construct a cantenna, cuz it's directional antenna and there is a better boost, a material needed for it is less then 5$...and most important for home made antennas u never use more then 2m of cable. cuz of the losses in the cable, or u will end up in more losses then gain from antenna... 75ohm tv cable is not designed for 2.4GHz, losses on that frequency in the cable are huge... i made my own yagi antenna, and a helix antenna.. helix is easy to make, a has a good boost
linux + aircrack + wlan adapter that can have monitor mode enabled... serach linux forum on wlan chipsets which have peek drivers... and most important u have to have strong signal... if signal is under 65db there r low chances u will capture data packets
Hi their ,can you please reply to my comment ,Also my current wireless network card is having male connector so I need female connector for my D-Link "G"make adapter antenna.
Thanks for your prompt reply .I am living in Toronto,Canada ,so please find the place from where I can get Connector.I am using cable RG6 that is ok to use
Hi Dear ,Thanks for your great video,I am not finding connector which connects to the wireless card,can you give me exact name of that connector.Since 15 days I do not have an internet I am living in the basement and mmy friend's router is at first floor .Help me out for connector
Beautiful job mate! simple, concise, and even elegant. Especially i like the end, with those buildings and the antenna ready to catch the world. Thanks
hye man nice vid i just pulled the cap off my wireless antenna its the exact same as the one your making only smaller... how can it fare in a dense area like lots of houses??
PLEASE DONT READ THIS. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR%uFEFF LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT TO AT LEAST 3 VIDEOS YOU WILL DIE WITHIN 2 DAYS. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS OVER TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY BECAUSE IT ACTUALLY WORKS
This comment has received too many negative votesshow
your mexican right...why does everyone need to hack wifi...jus get your own wireless fucking router..cheap hacking bastards..learn how to talk fucking english...dumb fucking mexican
First of all this is science and for learning purposes. A lot of M F**K**S Like you search YouTube to find WiFi hack and ways to get free internet and that is how you came here in the first place. Secondly I am an American unlike what youve suggested you mo th* r f ** king racist. And finally everyone here knows how to criticize and to let you know you suck at it @ $ $ HOLE
If you have the money then satellite would be the idle solution. But alternative to that is this one. and it can reach to max of 17 decibels around 235 Yards and with right Surroundings can get you around 500 yards
It would be possible but your WLAN Card doesn't generate enough power to send and receive signals to your roof! If you can find a way around this i think you will get a result but it would not be a big of a difference. Maybe a $5 antenna would would show better results!
"It would be possible but your WLAN Card doesn't generate enough power to send and receive signals to your roof! " <<<this is in direct conflict with your statement "make the cable as long as you want".
false. In the US it is illegal to use anyone else's wireless internet connection w/o express permission. it is theft...they paid for something, you are using it w/o permission.
three posts w/nothing to say (tha inner-knet awwta bee faree).....what a whiny loser you are, boy. Obviously stupid and selfish, you apparently like to hear yourself prattle. Here's the thing: you can go back into your closet and listen to your shrill, whiny nonsense....you do not have to go online and annoy others to do it.
I have a few questions, does it perform better than the antennas (that also come with a cord) you can buy and replace the D-Link one? How much do the cable and the connector cost if I went to Radioshack? Also do I need to solder in the new connector?
NO, antennas are much better but if you live in a building or apartment where will you put it? So landlords don't allow it.
And yes D-link also sells ready ones. And No no need for Solder. and by the way this video is for learning purposes so if you did do it please give me your feed backs.
I wish that was the case. The funny part is that the day before that i cut my finger trying to separate frozen burgers. I had a 130 min surgery to restore my cut vain. Sh*t happens. LOL
Well it was so frozen i had to hold it in one hand and separate it with the other. When i applied little pressure the knife went through the other side and cut my finger. LOL
Ok, what I'm working on is trying to transmit WiFi Signals on an Electronic tape waves. What I did was I un-assembled a digital electronic tape and placed the WLAN PCI Antenna perpendicular to the electronic tape.
(part2)See the waves that are generated from the E-Tape could travel up to 250 Ft. (not helpful) so what I did was I increased the pitch volume of the E-Tape and there I got it to go 723ft. So far so good, then when I placed the antenna in front of it all the access points disappeared! It took me long time to figure out the reason but then it hit me.
(part3)I place an access point about 630ft away in one of my friend's apartment. When I pointed the tape directly at the access point I received an "Excellent Signal" but only for 5 Sec. Now what I have to work on is to make the E-Tape constantly transmitting waves and creating a way to automatically rotate searching for access points.
you know what you saying is bullshit? its not "boosting" the WLAN you are just placing the antenna in a better position.. i wont disagree it gets better signal now, that is because the antenna now is outside witch means that some of the wlan signals are not reflected by the window.. sorry dude not a boost.. but its still nice for people with a stationary PC in a crappy position..
You are 100% right, it's not boosting, but how will I describe it to nobies? but on the other hand I did come up with boosting device but its way too expensive, so might as well just subscribe for Internet. In short i am trying a better way to construct a boosting device with cheap products found in most homes. Thanks for comment
ba tzaranu pizdii ce te chinui sa vb atata engleza knd tu te cunosti k esti roman mancamiai pula de avortat
1xservers 10 months ago
I have called Lighthorse Technologies for an RP SMA male connector and they tell me that it will not work with the rg59 thin cable antenna made by Phillips.
artoshea 1 year ago
hey wat happend to ur PINKY Xd
cheat2kil 1 year ago
rg59 ultra thin cable made by phillips. this cable is low loss and cheaper then tv cable. And btw 300% = 3x
sunshine4lb 1 year ago
This has been flagged as spam show
@sunshine4lb I have called Lighthorse Technologies for an RP SMA male connector and they tell me that it will not work with the rg59 thin cable antenna made by Phillips.
artoshea 1 year ago
@retrorecycler ......yes dear i think ur rite.......i dont know more about this.....but t wires we have in the wifi antena is a copper wire with silver coating on it ...........n have high n good transmision of data............now i had left the job of wireless networking .....so t most of t things i had forgot
theSharu999 1 year ago
Can sum1 tell the exact connector/adpter that's compatible enough to connect a pci card to a cable tv coaxiel cable? I shopped arounf several stores & no one knew what an rp-sma male connector was. Can anyone tell me the specific aadpter name needed to connect these 2 items? e.g.-is it n male to n malae sma or something like that?
asshole4good 1 year ago
@MisterBaz1 300% implies 3x stronger :P
schnappy00 2 years ago
Never mind, I just read the description. This guy really is making ludicrous claims....sorry for posting without thinking...
dbz71620 2 years ago
np....prob a typo, but the claim is STILL suspect at 300%. He has yet to reply.
kenfo0 2 years ago 3
Yeah, even 300% is unlikely.
dbz71620 2 years ago 2
Kenfo0, can you read? The title clearly says 300 percent, not 300 times. If 100% is times 1, then what is 300%? "3x", not "300x".
dbz71620 2 years ago 4
y did the cord in 0:18 move away frm him O_o
aaroncrui 2 years ago
I was scared toooo! sh!t is hunted
sunshine4lb 2 years ago
wtf he is magnetic lol
angelfan1993 2 years ago
u can say that
sunshine4lb 2 years ago
free net for all!!!
witecracker2 1 year ago
@aaroncrui it knew that i was going to cut it up :P
sunshine4lb 1 year ago
@aaroncrui cuz you hear that buzzing in the back round he has some kind of computer or something thats causing high radiation in that room
AlbertInSanAntonio 1 year ago
haha 1000m wire. priceless.
torgosassistant 2 years ago
Is wlan same ass wifi???
mac1ace1 2 years ago
yes, wifi is the certification
GauravA42 2 years ago
No wifi is same as wlan... lol
sunshine4lb 2 years ago
Jesus
idioten112jan 2 years ago 3
Nice vid. BTW you sound like Ren of Ren & Stimpy.
BahoUtot 2 years ago 4
Holy shit, you're right.
TheEvilMarikIshtar 2 years ago
you antena 2dBi up to 3dBi.. connecting outdoor 150m. (Corrupt resistance antenna 50 Ohm)
0903390901 2 years ago 3
Yes it does
sunshine4lb 2 years ago
ok i can not find a connector end, radio shack has no 5j-58 part, nor do they know of any connector that will work for this, if any one knows please list a company and part number so i can get this connector
rrmag001 2 years ago
Simple google it !
sunshine4lb 2 years ago
Wait a secont, you can get the actual SSID's?
macedonian82 2 years ago
Yes.... if you have mac laptop you can get the keys
sunshine4lb 2 years ago
use 50 oam coax not 75 like use rj58 at ratshack
jeffschefke 2 years ago
this is idle thumbs up
sunshine4lb 2 years ago
nice idea.
HHO4ALL 2 years ago
Thanks
sunshine4lb 2 years ago
i like this up side down..hahaha
stearmer 2 years ago
nice to know that, what ever makes you happy :)
sunshine4lb 2 years ago
Does this really work?
aberfitch82 2 years ago
well, you can try and let us know what happens
sunshine4lb 2 years ago
can i do this to a wifi router to increase signal strength?
shrinathmukund1991 2 years ago 2
Yes, but it is totally not the same as in this video.
sunshine4lb 2 years ago
hehehhehe
paseggiato 2 years ago 4
hahahahaha
sunshine4lb 2 years ago
what can you do with a aluminium pie holder and some of that wire?
metalmodman 2 years ago
Well you can make a stand for the plate and make it stand somewhere close to it and move it around circle wise you will see little difference
sunshine4lb 2 years ago
Really nice video, but I am still concerned.
Because I used to work alot with mc27's ( advanced ones) But a normal or advanced one, the TX/TS must have a 1 on 1 ground to the antenna if it was out of range we could blow up our mc27 ( like portophones). So i'm most likely worried u will kill you routers transmitter with this idea.
Great video though :)
edonldutch 2 years ago
True, you must rig the router with adapters
sunshine4lb 2 years ago
does it work full duplex or just receiving = strong?
fr33atesickz 2 years ago
Receiving Strong
sunshine4lb 2 years ago
what happen for your finger hehehe
jihad355 3 years ago
I wanted to save some money and make my own burger, cut my finger off trying to separate frozen burgers... LOL
Next time i will go to McD and pay $4 rather then paying $230 to Saw my fingers
sunshine4lb 3 years ago
Rumor is that you can, so correct me if I am wrong. How come you dont use the wire to connect with a satellite dish (with some modifications of course)???
dolla130shine 2 years ago
Well true, you can modify a satellite dish to send signals but this is not the problem, the other end should be also rigged to send long distance signals, just picture it!
sunshine4lb 2 years ago
That's why you use a BiQuad, just picture it!!!
dolla130shine 2 years ago
so can you go through walls more?
bcbs15 3 years ago
no my head hearts
sunshine4lb 2 years ago
see that large bandage on his hand? this is god saying something
XboxNerd08 3 years ago
Yes, it means
Watch out! I am Dangerous
sunshine4lb 3 years ago
this is bunch od c*ap! first of all u don't use tv cable cuz it has 75 Ohms impedance, and the loss increases, second if u want u use a cable then it's 50 Ohms RF cable with low loss, on 2 meter 1db loss, on 50m of cable u would have 25dB loss which eaquales cr*py SIGNAL...if u want a wifi boost buy a 15dB or more yagi antenna for 2.4GHz, second author is trying ti imitate an omni antena which has to have precise space between coils, and a precise lenght of cable to work on wifi channels
Morpheus249 3 years ago
Great but you missed one point.
We try to modify things found at home. To limit cost. If thats not the case just go to any tech shop and order a ready made wifi booster for less then $70.
sunshine4lb 3 years ago
then u had to made how to construct a cantenna, cuz it's directional antenna and there is a better boost, a material needed for it is less then 5$...and most important for home made antennas u never use more then 2m of cable. cuz of the losses in the cable, or u will end up in more losses then gain from antenna... 75ohm tv cable is not designed for 2.4GHz, losses on that frequency in the cable are huge... i made my own yagi antenna, and a helix antenna.. helix is easy to make, a has a good boost
Morpheus249 3 years ago
anyone found a easy way to detect WEP passwords?
faulisdead 3 years ago
research packet capture and replay attacks
rogueelite 3 years ago
linux + aircrack + wlan adapter that can have monitor mode enabled... serach linux forum on wlan chipsets which have peek drivers... and most important u have to have strong signal... if signal is under 65db there r low chances u will capture data packets
Morpheus249 3 years ago
wtf? a person baught a 1000m tv cable? omg
Arrows73 3 years ago
lol, Thats what i was saying
sunshine4lb 3 years ago
wow traffic much?lol nice vid
guyanakid 3 years ago
Hi their ,can you please reply to my comment ,Also my current wireless network card is having male connector so I need female connector for my D-Link "G"make adapter antenna.
gawarwala 3 years ago
please visit the forum and post there
as it will help many others thank you!
sunshine4lb 3 years ago
Thanks for your prompt reply .I am living in Toronto,Canada ,so please find the place from where I can get Connector.I am using cable RG6 that is ok to use
gawarwala 3 years ago
Hi Dear ,Thanks for your great video,I am not finding connector which connects to the wireless card,can you give me exact name of that connector.Since 15 days I do not have an internet I am living in the basement and mmy friend's router is at first floor .Help me out for connector
gawarwala 3 years ago
Please post in forum of which country you live in with details of your WLAN and i will look up where you can buy the connector.
sunshine4lb 3 years ago
is there any way u can put antenas on a usb wirless adapter
daboikeith 3 years ago
There are many ways but you have to give more details. please post in forum
sunshine4lb 3 years ago
Beautiful job mate! simple, concise, and even elegant. Especially i like the end, with those buildings and the antenna ready to catch the world. Thanks
Pauninggio 3 years ago
Thanks mate! Give us a visit in our forum some time we be glade to read your posts
sunshine4lb 3 years ago
So basically this is just hooking it up to a larger antennae..
Simple but Effective!
windgod2000 3 years ago
Exactly!
sunshine4lb 3 years ago
hey man how do i increase my laptop signal? help please
gmoreno713 3 years ago
search and post in website
sunshine4lb 3 years ago
MAN this is awsome!!!!!! thank you soo very much sir
UnknownZerggling 3 years ago
Any time visit our website for more cool stuff
sunshine4lb 3 years ago
hye man nice vid i just pulled the cap off my wireless antenna its the exact same as the one your making only smaller... how can it fare in a dense area like lots of houses??
wei00007 3 years ago
please visit the website and post your request there as i will be glad to help you
sunshine4lb 3 years ago
This has been flagged as spam show
lilxboxchamp931 3 years ago
how can i increase my laptop's wifi signal? it has no card, built in i think
klick4x 3 years ago
visit da web site
sunshine4lb 3 years ago
This comment has received too many negative votes show
your mexican right...why does everyone need to hack wifi...jus get your own wireless fucking router..cheap hacking bastards..learn how to talk fucking english...dumb fucking mexican
patriotsmvp2013 3 years ago
You use to many dots in your writing.
NivnacMas 3 years ago
First of all this is science and for learning purposes. A lot of M F**K**S Like you search YouTube to find WiFi hack and ways to get free internet and that is how you came here in the first place. Secondly I am an American unlike what youve suggested you mo th* r f ** king racist. And finally everyone here knows how to criticize and to let you know you suck at it @ $ $ HOLE
sunshine4lb 3 years ago
true, patriot.
aquateenI16 3 years ago
does it matter what kind of card it is?
B,G, N?
tony1519 3 years ago
Well technically no,it all depends on the router that sends the signal!
but most of the cards today supports all band
sunshine4lb 3 years ago
is this better than the satellite dish idea
and how many decibels does it produce?
OutBlast47 3 years ago
yes in a way,
If you have the money then satellite would be the idle solution. But alternative to that is this one. and it can reach to max of 17 decibels around 235 Yards and with right Surroundings can get you around 500 yards
sunshine4lb 3 years ago
Would it be possible to hook your antenna input to a TV aerial on your roof?
Xervishfl 3 years ago
It would be possible but your WLAN Card doesn't generate enough power to send and receive signals to your roof! If you can find a way around this i think you will get a result but it would not be a big of a difference. Maybe a $5 antenna would would show better results!
sunshine4lb 3 years ago
"It would be possible but your WLAN Card doesn't generate enough power to send and receive signals to your roof! " <<<this is in direct conflict with your statement "make the cable as long as you want".
kenfo0 2 years ago
Comment removed
witecracker2 1 year ago
This comment has received too many negative votes show
this is illegal, keep that up and your going to lose another finger
kenyjune 3 years ago
This is science! We all have the freedom to learn and the right to implement. And this video is for boosting not hacking!!!!
sunshine4lb 3 years ago
you cant say its illegal lol cz there is no law written tht yuo cant do that.
sonamta 3 years ago
True!
sunshine4lb 3 years ago
false. In the US it is illegal to use anyone else's wireless internet connection w/o express permission. it is theft...they paid for something, you are using it w/o permission.
kenfo0 2 years ago
Waaaaaaaaah!
ivegotalongdong 2 years ago
From your pg: 'some people have a problem w/my frank honesty". No, people have a problem with your whiny, childish, ignorance.
kenfo0 2 years ago
sorry its free, get over it, spread the wealth and make the internet free for all@!!!
witecracker2 1 year ago
three posts w/nothing to say (tha inner-knet awwta bee faree).....what a whiny loser you are, boy. Obviously stupid and selfish, you apparently like to hear yourself prattle. Here's the thing: you can go back into your closet and listen to your shrill, whiny nonsense....you do not have to go online and annoy others to do it.
kenfo0 1 year ago
does the PL259 work as a connector?
wvtn 3 years ago
IT works if you try to connect it to a VCR or TV. LOL - No the point here is to connect the wire to the WLAN Card.
sunshine4lb 3 years ago
does it have to be a TV cable?
wvtn 3 years ago
Not really but it can't be electric wire!
sunshine4lb 3 years ago
hey i hav a laptop how do i connect the cable to the laptop ?. wi fi in it/ the card is already present in it
karllee989 3 years ago
Visit my website you will find the answer in
Information Technology > Technical Support Help > sunshine4lb's antenna
sunshine4lb 3 years ago
Yest tnt2056 it will work also with a router but you will not need a software of any kind! since you are only boosting the signal of the router
sunshine4lb 3 years ago
Will this work for a router ?
and what happens if the wores touch the coper wire ? (will not work?)
tnt2056 3 years ago
Touching them together will interfere with the signals transmitted to your System
sunshine4lb 3 years ago
can you give me the registration key for the wirelessmon 3.0 so that i can perform your task
Gdice2000 3 years ago
In the zip file you have downloaded from my website there should be a patch or crack. Re-look into it
sunshine4lb 3 years ago
Awesome vid
xavcer3424 3 years ago
Thanks
sunshine4lb 3 years ago
psp? how u gonna put network card on a psp idiot? lol too bad we cant get wireless net work tru a router. if u dont have internet at home?
wuntyme 3 years ago
Well it is possible to boost wifi on a psp. but i guess it needs alot of work and some who is willing to trash a psp! LOL
sunshine4lb 3 years ago
idiot? your the idiot psp does not need one it gets wifi. next time you call someone an idiot know what your talking about plz.
nodogyougay48 3 years ago
it is wirelessmon2 you can find it at my website. You could also download wirelessmon 3 from my website, from the download center.
sunshine4lb 3 years ago
it sounds confusing and any way i dont have all that junk
jltomsik 3 years ago
Well since it is junk then why are you here anyways go play with your Barbies maybe you can find something there!
sunshine4lb 3 years ago
he's not saying its junk in that kinda sence.
nodogyougay48 3 years ago
True but it is nice to keep the area HOT
sunshine4lb 3 years ago
yes yes and i do like the idea will ot work for a psp?
nodogyougay48 3 years ago
I have no idea because i don't have one?!!?
sunshine4lb 3 years ago
what happen to your finger?
jinrahsdi 3 years ago
go back and read comments i think you will find it there
sunshine4lb 3 years ago
This has been flagged as spam show
Please visit my website for Full Free Support
sunshine4lb 3 years ago
Which card should i use to fix the cabel .
Please post the name model etc. which will be best for this work.
ziaullah96 3 years ago
This is very MacGyver, lol.
I have a few questions, does it perform better than the antennas (that also come with a cord) you can buy and replace the D-Link one? How much do the cable and the connector cost if I went to Radioshack? Also do I need to solder in the new connector?
SirNoobs 3 years ago
NO, antennas are much better but if you live in a building or apartment where will you put it? So landlords don't allow it.
And yes D-link also sells ready ones. And No no need for Solder. and by the way this video is for learning purposes so if you did do it please give me your feed backs.
sunshine4lb 3 years ago
that is a coaxial cable it loses more strength the longer it is 25 feet and the signal is gone.
polarfisher55555 3 years ago
Because you need to set the power to max in your card settings
sunshine4lb 3 years ago
before and after would be better
kkostas86 3 years ago
lol
sunshine4lb 3 years ago
im definetley doin this hahahahahhaa
big up
Dappadon3339 3 years ago
This has been flagged as spam show
visit my website, the address is in the title
sunshine4lb 3 years ago
good vid, BUT its not a good ida to shout about keygens/Crack. ssshhhh
cyberjackcyberjack 3 years ago
don't wory buddy
sunshine4lb 3 years ago
cool!
the problem is that im using USB adb. =\
noob3lvl 3 years ago
kinda defeats the purpose of being wireless tho. having wires and all
dazza108 3 years ago
True but some people like to get free internet and they don't care if there was forks and spoons on wires
sunshine4lb 3 years ago
hahahahaha
bluebirdie252 3 years ago
Sweet! I'm gonna try this. Does it work the other way? Like on a router?
lotsoflemonisback 3 years ago
ouch! sorry bro. It was a great video and will give it a try.
lbuggiani 3 years ago
looks like he might have been a bit rushed and cut his finger with the knife. Nice bandage.
lbuggiani 3 years ago
I wish that was the case. The funny part is that the day before that i cut my finger trying to separate frozen burgers. I had a 130 min surgery to restore my cut vain. Sh*t happens. LOL
sunshine4lb 3 years ago
how do you cut your finger from seperating a frozen burger?
maiyahi1 3 years ago
Well it was so frozen i had to hold it in one hand and separate it with the other. When i applied little pressure the knife went through the other side and cut my finger. LOL
Now i do it with a fork loooooool
sunshine4lb 3 years ago
lol thats disgusting i get headaches thinking about that stuff
dalmahmay 3 years ago
very common injury XD
oldbinny 3 years ago
it works!
eaglehawk19 3 years ago
i dodnt like this new video type from youtube
ToraToros 3 years ago
? huah!
sunshine4lb 3 years ago
no i got nothing to do with you or youre video, its youtube site in europe is different
ToraToros 3 years ago
(part4)I hope this paragraph inspire new ideas and please if you have any e-mail me, Sunshine4Lb at Gmail
sunshine4lb 3 years ago
(Part 1)Hay Adam,
Ok, what I'm working on is trying to transmit WiFi Signals on an Electronic tape waves. What I did was I un-assembled a digital electronic tape and placed the WLAN PCI Antenna perpendicular to the electronic tape.
sunshine4lb 3 years ago
(part2)See the waves that are generated from the E-Tape could travel up to 250 Ft. (not helpful) so what I did was I increased the pitch volume of the E-Tape and there I got it to go 723ft. So far so good, then when I placed the antenna in front of it all the access points disappeared! It took me long time to figure out the reason but then it hit me.
sunshine4lb 3 years ago
(part3)I place an access point about 630ft away in one of my friend's apartment. When I pointed the tape directly at the access point I received an "Excellent Signal" but only for 5 Sec. Now what I have to work on is to make the E-Tape constantly transmitting waves and creating a way to automatically rotate searching for access points.
sunshine4lb 3 years ago
just to let u know 300x stronger and 300% stronger are WAY different.
YamzYamzAndMoreYamz 3 years ago 6
Thanks Smart one, i think i know that,
300% means 3x. And if i build a 300x boosting device i think D-Link will be out of Business.
sunshine4lb 3 years ago
u might wanna fix that typo then :P
YamzYamzAndMoreYamz 3 years ago 3
Thanks!
sunshine4lb 3 years ago
Mind includeing a guide for a laptop`s Wifi card? (antennaless)
TheLittleCuteThing 3 years ago
Send Me an Email
sunshine4lb 3 years ago
good video ..... very impressive
oconnell999 3 years ago
Thanks
sunshine4lb 3 years ago
your welcome .. good friend .... take it easy
oconnell999 3 years ago
never use tv cable, it will make your wireless card less strength.
yolarrydabomb 3 years ago
True, but not too much... We are looking for Cheap Items, and other cables are costly.
sunshine4lb 3 years ago
Can u use wireless card pcmcia instead of wireless pci?
DarkMission91 3 years ago
You Can, but it is hard and it's not worth it! Sorry
sunshine4lb 3 years ago
you know what you saying is bullshit? its not "boosting" the WLAN you are just placing the antenna in a better position.. i wont disagree it gets better signal now, that is because the antenna now is outside witch means that some of the wlan signals are not reflected by the window.. sorry dude not a boost.. but its still nice for people with a stationary PC in a crappy position..
migbirch 3 years ago
You are 100% right, it's not boosting, but how will I describe it to nobies? but on the other hand I did come up with boosting device but its way too expensive, so might as well just subscribe for Internet. In short i am trying a better way to construct a boosting device with cheap products found in most homes. Thanks for comment
sunshine4lb 3 years ago
what wireless did you use i use a usb wireless
wireless2107 3 years ago
You need wirless PCI Card
sunshine4lb 3 years ago