MAKE SURE THE SETTINGS ON THE CONSOLE RESOLUTION IS 1080i or LOWER.
Because if the CONSOLE's RESOLUTION IS 1080p, the HD PVR can't read the resolution because the cables that plug into the CONSOLE to the HD PVR to your HD TV are NOT 1080p resolution standard!
THUMBS UP ALL OF MY COMMENTS SO THAT EVERYONE CAN SEE!!!
Read! IF THERE IS STILL NO SIGNAL ON THE TV OR THE COMPUTER, HERE IS WHAT YOU SHOULD AND FOLLOW THESE STEPS EXACTLY!
1) Start your HD PVR NORMALLY when EVERYTHING is plugged in to your TV and USB in the COMP
2) Watch the lights on the HD PVR (there should be a little blue LED light that shows up on the left side on the front, then a amber-color light should flash on the front left side of the HD PVR.
hey, I have done exactly the same thing you did here, but it isnt any picture on my computer. and when I plug the cables out of the hd pvr, the picture stays on my screen. WTF !?
its like the signal aint passing through the hd pvr.
@bluesmaster94 ok there will still be a picture on the screen no mater what u jst have to change the channel or turn your ps3/xbox off. did u make sure to put the cables in the input because if u dont it wont come up with a pic on your computer
@GoDzProductions1 i pluged my pvvr cords and crap in my tv and its not showing up on my computer it keeps saying please check your cables but there all perfect help!!!
Go check out my channel, I got a tutorial on how to fix it :)
It works BY THE WAY!
TheFlorrix 1 month ago
wat did you plug with the hd pvr cable ?
TheKingsOfGame 3 months ago
MAKE SURE THE SETTINGS ON THE CONSOLE RESOLUTION IS 1080i or LOWER.
Because if the CONSOLE's RESOLUTION IS 1080p, the HD PVR can't read the resolution because the cables that plug into the CONSOLE to the HD PVR to your HD TV are NOT 1080p resolution standard!
THUMBS UP ALL OF MY COMMENTS SO THAT EVERYONE CAN SEE!!!
MrxExternal 3 months ago
4) Turn ON the HD PVR and wait a minute, then it off.
5) plug EVERYTHING back into the HD PVR and the USB into the COMP.
THIS SHOULD WORK!
MrxExternal 3 months ago
Read! IF THERE IS STILL NO SIGNAL ON THE TV OR THE COMPUTER, HERE IS WHAT YOU SHOULD AND FOLLOW THESE STEPS EXACTLY!
1) Start your HD PVR NORMALLY when EVERYTHING is plugged in to your TV and USB in the COMP
2) Watch the lights on the HD PVR (there should be a little blue LED light that shows up on the left side on the front, then a amber-color light should flash on the front left side of the HD PVR.
3) Wait 10 seconds then turn your HD PVR OFF.
READ NXT COMMENT
MrxExternal 3 months ago
were did you get the cables and is their any name on them
T3AZHD 5 months ago
@T3AZHD u can get them at any electrical shop and they are a component Y cable
GoDzProductions1 5 months ago
@GoDzProductions1
Ok thanks
T3AZHD 5 months ago
hey, I have done exactly the same thing you did here, but it isnt any picture on my computer. and when I plug the cables out of the hd pvr, the picture stays on my screen. WTF !?
its like the signal aint passing through the hd pvr.
please help ! :)
bluesmaster94 7 months ago
@bluesmaster94 ok there will still be a picture on the screen no mater what u jst have to change the channel or turn your ps3/xbox off. did u make sure to put the cables in the input because if u dont it wont come up with a pic on your computer
GoDzProductions1 6 months ago
@GoDzProductions1 i pluged my pvvr cords and crap in my tv and its not showing up on my computer it keeps saying please check your cables but there all perfect help!!!
420KushSmokin420 6 months ago
what r them cables called
imFlaqxzHD 7 months ago
@imFlaqxzHD splitters (2 female, 1 male)
theslammer92 7 months ago
Thank you so much!! Sub for U
FlippyGaming 1 year ago