Added: 1 year ago
From: RCSuperPowers
Views: 142,626
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (238)

Sign In or Sign Up now to post a comment!
  • Can you put 2 motors on this?

  • What on board camera are you using???

    

  • @PanicWithCheese description...

  • wich camera on the plane do you use

  • @TheRctest description....

  • can I make a plane out of rc helicopters? (I have a 4 channel helicopter with a broken accu, a 3 channel helicopter with broken blades, and 2 picooZ sky challengers)

    is it possible to make a combination into a plane?

  • is it made from cardboard?

  • @raxaxaganaz

    no, 6mm depron foam

  • @RCSuperPowers hello I'm new to rc and I'm going to be making the f-22 soon. I was wondering how many servos do u need. Also what do ailerons, and rudders do. Can i get away with only using 4 servos???? please help!!!!

  • what are alerions because I'm new to rc??

  • Hello ... What is your RC TX to have all these mix set up.. Thank's..

  • so how much in total?

  • Wow Dave a wife that doesn't say she is cold or too hot and helps u out. Can't wait too see more videos and PDFs .

  • i miss these really fun videos

  • DO A BARREL ROLL! I'm sorry, it must be done.

  • DO A BARREL ROLL! I'm sorry, it must be done.

  • I want to get a plane and own you with it!!! MUHAHAHHAHA Just kidding Im starting out and I just need to find a place to fly for the first time I have an old out dated B4 BACKDRAFT Stealth Flying Wing made by COX and just wanted to know if it's ok to fly in a parking lot?

  • you should try making it do the cobra. it looked like it might have enough thrust to pull it off.

  • can i just ask you :where do i get the foam?

  • nice

  • could i ask wat camera you attached to the plane to get that vieuw? i'dd like to have some bird-eye views of a place... also: is it wireless or something?

  • @MrSitarus

    You can get the go-pro helmet camera but i would assume for a foam airplane it would be a little heavy...

  • do a barrel roll!

  • LOVES THE PART in 1:32 (stalling)

  • China's J-20 is better than F-22 and Pak-Fa! watch?v=vJglDs9-mus

  • gret! congrats!

  • dude it looks like your experts in models mind if you try doing my 3d-model homework thanks!

  • i want one of those

  • do a crash  test

  • Will a all-a-mic-gyro make my plane fly better?

  • I built this plane and it was my first one I built but I can't figure out how to make the door open and close. Also can you send me a vid of the building of the plane?

  • WIZZ BANG

    

  • hi,,i bought the f22 pdf plan n setup everything,except i cannot do the elevator.can u plz tell me how to setup elevator it only moves up side n down wards against each other..like landing n flying both should go up or down.can u tell me how do u do that?..thanks

  • can you use a 5 channel radio on this plane ?

  • do a barrel roll

  • Dave, can I mount the motor on my head and put wings out my ears and a stabreizer in my..... but will I fly ?

  • Sweetness indeed :)

  • Have you guys ever thought of flying FPV?  It's intense I can tell u that.

  • i had the PDF plan for this plane and it gave me a small one not like yours... why??...

  • i love the video feed from the planes

  • can it transform into starscream? xd

  • Comment removed

  • Dave does it make a big difference where the engine is.You have it just in front of the stabilizers, Ive seen jet with the engine slightly back about even with the middle of the stabilizers...Im sure this effects the CG.What is the best way?.Thank you in advance

  • wow we wait 2 weeks for a video every time its always 20 mins or less long make an hour long video every 3 months

  • nice park job , i like it.

  • Can you design one large enough for me to fly to china?

  • @PontoonStriperFishin U will prob get shot down, not a good idea lol 

  • hi, Remember the video that's called "build your first profile plane" I was looking for the PDF files and couldn't find them anywhere! 

  • wow..f-22 so good...好想玩喔..那裡有得買??

  • WHAT TRANSMITTER ARE YOU USING???

  • Comment removed

  • @DarkHero00Rises omg it took years to get that out of my head and you had to bring it back... DANG YOU STARFOX!.... "Do a barrell roll"... "Do a barrell roll"... "Do a barrell roll"... omg nightmares for months ahead just you wait.

  • Its their "CAD".

  • I had a hobbyzone airplane quite a while ago, and did a reallly bad crash with it! It is called the Firebird Scout, and I was wondering if youc ould review it Plz!

  • What kind of  foam/thickness did you use on this F-22..Also do you still have live chat.Its been a while since Ive been on here..Great work as usuall

  • Hey Dave, do you use CAD for your aircraft? If yes, the n what kind?

  • @DumboRats8998 Google sketch up.

  • @alt572 What's that???

  • I want to buy a RTFF with the Free life time phone support.

  • I really thought "DAVE" would have suprised ALL of "US" with a GREAT 1st. of 2011 video : = () but is is not to be

  • @Imbefuddeled i tink "DAVE" is in China for NEW YEARS! I heard on twitter that he is MOVING THERE!!!

  • F22 RAPTOR !!!

  • ok I'll try again , youtube usarcjets

  • Happy new year

    

  • SUBSCRIBE PLZ!!!!!!!!!!!!

  • @jexus23 didnt u know, people just ignore comments like that?

  • @f18hornet1001 obviously not;)

  • Sweet Man Great Info thanks for sharing 

  • all the old PDF plans went to plan heaven !

  • hey dave where are all the old pdf plans on your site?

  • Merry Christmas and a Happy New Year sorry that i'm late

  • I must give all the credit to Val, without her Dave would have no ambition or incentive to even get out of bed each day. :)

  • I'm surprised Dave didn't make a Santa and Sleigh with reigndeer to fly for a Christmas video. Lol!

  • please fly the piper mini super cub by hobbyzone.

  • Hey Dave Merry Christmas to you val scott and the old gang keith and phil Keep up the good work

  • could you make some micro jet pdf plans

  • would it be possible to make a micro jet with only elevons

  • wizz bang

    hahaha

  • Brill video guys! looks realistic :D love the vids

  • why wont tehy make more rc videos for me to watch each day??? plz respnd! i want to watch videos and buye planes from the hobby city king.

  • wow, I leave town for a couple days and there's a verbal slapfight on a HAPPY youtube channel. where's the holiday spirit folks? well Dave, Val, Scott... Happy Holidays and happy flying.

    Shane

  • Awsome rc.....gr8 vid to :D

  • I had to restart the video because i was carried away from all theses comments.

  • @TeenFlyer95 me too. lol

  • Nice work Dave. That is a very nice and scale looking F-22 for sure. The Added rudder-ons =) seem to be a little overkill, as they likely rob much of the surface air from the elevons, but it is a great theory to test regardless. Merry Christmas!

  • dude nice plane im in the airforce and i fly f-15's im part of the strike eagle demo team and i think this is one pretty sweet hobby its like a real jet haha nice video bud

  • @djmedic2008

    ....jerk

  • Merry Christmas Val,Dave,Keith and Scott.

  • how much would you charge to attach airsoft guns and a camera to one of your plains

  • @Imbefuddeled oh. Well.. then Ill be hushed up then. If I interpret that right.. then I will say we were working for the same mission for Dave. Respect.

  • @Imbefuddeled I have heard that so many times.. it means nothing to me. Ill send it right back at ya.. you have no idea who I am. Well now we dont know who each other it... woopie. Two dudes who like airplanes with 2 ways of treating a fellow engineer and pilot. I have read plenty of threats online in my day.. and truly.. Im not intimidated. Sorry bro..

  • Ho Ho Ho Merry Christmas Val,Dave,Keith and Scott.

    Billy D

  • djmedic2008 take a pill fella!

    Was just about to say what a vid! Obviously a pro and excellent quality, wud love to have a go of one of these but wud probably waste alot of money in a short time.... I.E Crashing! Love the way ye got a woman in on the act too quality! ;) ..... Happy xmas!

  • wish i could fly a rc plane

  • Great camera work. What is that onboard camera and how do you mount it?

    Thanks in advance for your reply.

  • GREAT JOB DAVE and Crew.. thanks for BUSTING YOUR ASS for us all year long, and we THANK YOU for being there for us!

  • GREAT JOB DAVE and Crew.. thanks for BUSTING YOUR ASS for us all year long, and we THANK YOU for being there for us!

  • nice plane Dave.

    Hope you and Val have a great christmas season

    lovin your channel in Canada

  • i like to beat this guys ass into the ground its fun. look at this funny lookng clown fly his dumb plane. ive been flying gas plane for years and build models with scale pilots, i know better than this jerk. anything he does or says i will use against him.

  • nice man i can remember when you first started making videos.

  • The issue is people's appetite for new content is voracious. Dave only has limited time to produce new videos. The new planes are more technical. On another note, Dave's and scott's attitude leave a lot to be desired lately. Posting a video on a medium such as youtube, when the subject matter includes technical theory that some viewers have experience on, theres going to be discussions. IE rudder flex X-31 video, a lot of attitude that wasnt needed in responding to comments.

  • @digitaldissent patience becomes a limited thing when dealing with thousands of people that are consistently "voracious, selfish, and rude". After 4 years of video production.. the first comment that was on this video was "we dont care about your personal life, we want more videos"/ THAT WARRANTS the attitude in my books. People are getting more rude and disrespectful with time, and I for one find it to be boorish. I have no problem speaking out against people arrogant and PIG like meanness.

  • Great job, keep them coming. I am sure you already know this, but don't let others effect how you feel. I see a negative rant on the page, I am sure it is just someone having a bad day.

  • haha 1:32 you JUST missed the other plane :D

    looks awesome!

  • do you make helicopters aswell?

  • very nice

  • Nice parking Dave ! I see you still have no snow yet ! Happy holidays :)

  • You guys are cool.  Thanks for the demo.

  • You should do b2 spirit

  • awesome! I wish i could buy one of these

  • Hobbyking sells gws products including v tail mixer that has 200 steps.

  • @12860682321 I buy all my stuff from hobby kings. they have gr8 survus

  • Ooo birdies.

  • @StayStupider +1 SCREW THAT GUY.

  • Sick F-22 design!

  • using spoilers whith elevator = slowing down whilest pitching = stall = bad design.

  • @Vrael1022 making comments on youtube that aren't backed by experience = stupidity = having crappy politicians YOU voted into office.

  • @NuttyPro67 im a second year aerospace engineering student and iv been flying/around model/actual aircraft for about 14years... and i know that if you increase your angle of attack it will increase the induced drag (and paracitic drag as well probably) which will slow you down which with the high angle of attack will induce seperation. also if you are using spoilers as well the drag is increased even more= manuvering + stall. and why are you talking about my goverment...? bit odd dont you think?

  • @Vrael1022 don't worry, scott is trying to defend his position :)

  • @Vrael1022 "oh look at me! I go to "airplane shcool" I know what Im talking about!" dumb ass...

  • @Vrael1022 Great, so it's taken you TWO YEARS to figure out what we did in just a few test flights. Spoilerons lift the nose up and put the aircraft at the perfect attitude for a landing. Yes, it causes drag, yes it causes loss of altitude and yes all of those effects are desirable when your wing loading is so low. The wing CAN stall, thats fine. The spoilerons keep the AILERONS from stalling, which is all you need for landing.

  • Hey Dave Thanks for all the great planes and vids, great work and Merry Chirstmas!

  • TOO FREAKING GOOD!

  • Nice you are really improving your building skills. keep up the good work.

  • sweet sauce

  • I like how you did that there like that.

  • i forgot you where still alive...

  • Dave and Val still be rockin!!!

  • @youtwoba Don't forget Scott! :D

  • We want more videos Dave! Please think of the name RCsuperpowers again! Please!

  • Whatever happened to "One more flight."? :)

  • Hey Dave good job. your planes are AWSOME! Keep up the good work

  • you should do a contest and give one out for free

    preferbly to me

  • @ManPie22 great reply for a time in the world recognized for Giving.. Selfish little peon.

  • I would like to buy one too.............. :-)

  • That thing is awesome!

  • Your videos make me want to buy your product...lol. Great Video!!!!

  • Comment removed

  • @djmedic2008 Ha, thanks Medic. I know, the RC community, they are something else huh!

  • @djmedic2008 dude, I fully appreciate the sentiment, but kids come to this channel and the RCPowers site and we don't need you to use profanity like that. Don't get me wrong, I swear like a trooper but there's a time and a place and this isn't it.

  • @alexnicholson7 respectfully - what instead all the rudeness should just be accepted, and Dave should get to feel like he is not appreciated? As someone who deals with this type of disrespect everyday on youtube and the internet - most of the ungrateful people - and kids alike need to see that this will not be tolerated. you an I will have to agree to disagree. I have held my text back for the last 2 years.. and that seems to be the problem. no one says whats right and wrong anymore.

  • @djmedic2008 pretty sure they are a business, so arnt they working kinda.

  • @djmedic2008 You tit lol this guy makes money out of this, great vid by the way

  • @riru69 ohhh eee ahhhh.. really? Dumbass.. know who are you talking to. Doesnt mean he doesnt deserve respect.

  • @djmedic2008 oh please, they dont do this for our good, they do this to make money. They would not waste time just to make other peoples life fun, they do it for money.

  • Comment removed

  • @Armando3oo wow. How do you think they fund the show to entertain you? your just continuing to show how humans can be so belligerently ignorant. First People are shouting for more MORE MORE.. then you slam them. please just unsubscribe then. If youre a part of my channel.. also unsubscribe.

  • @djmedic2008

    jerk, maybe asking for more is a way of saying how good his work is..

  • @molinobeer oh no! are you calling me a jerk? ohhhh ahhhhh... your words really sting. maybe you should have read what was being said before you pass judgment. but thanks for proving my point about people spouting off without knowing the circumstance.

  • @djmedic2008

    watch?v=BRcUASMb_N4

  • @molinobeer Yeah.. so what? ive seen it. And Good for him. Have you seen my channel.. it may explain more than you sending me that video. you didnt see that people posted "we dont care about your social life dave - do more videos". 129 people thumbed up that comment.. which is ...just... plain.... rude. I understand Dave wont comment on rudeness.. but I have no issue doing it. i have put up with plenty of smack talk.. and you calling me jerk.. aint nuthin'. Look in the mirror and say it

  • @djmedic2008

    I'm saying that to you because you are trying to make his "job" in youtube look like a saint/sacrificed work where he gives pleasure to people and gets nothing from it other than "BUSTING HIS ASS for us all year long".

    Obviously rude people are not correct, they never are, but for god's sake don't be such a jerk.

  • Comment removed

  • @Aircraftfreak155 and you.. What are you that un-educated and ignorant that you think your opinion matters? Why not grow a set of balls, and realize you are talking to a GOD FATHER of RC in Youtube and kiss his ass for the effort he and his crew have put into designing these planes and providing them to the public. What a bloody douche bag you are. and please.. do us all a favor and save your drivel for some 12 year old that might be intimidated by your use of caps lock.. Learn to Spell

  • @djmedic2008 never said they had bad desight in th planes i like there desighs. I was saying they need to learn to fly rather than using gyros and crashing there planes constatly As for my spelling iam severly dislexic so no need to callme un educate iam on the top in my enginering class for macanical drawlings an iam rciveing a full paid 4 year scholersip to the university of Arizona for it. i would be afinded by our rudness and incondiit actions but iam all to used to having it happen constaly

  • @Aircraftfreak155 Brother.. I feel for ya that you have a condition.. but there is no way for me to understand that when I am reading your text. You certainly didnt explain that.. But - You have no reason to disrespect an engineer by saying he doesnt know how to fly. That is straight un-educated nonsense. If you actually know what he is trying to achieve, you would realize how inconsiderate and rude your comment was. You have no right to disrespect Dave, and not get told to pound sand

  • @Aircraftfreak155 If you had any idea what you were talking about, I'm pretty sure you'd realise there's nothing wrong with their flying. Dave uses gyros and modifications because a) they can, b) its a bit of fun, c) its more relaxing to fly a stable plane.

  • @Aircraftfreak155 So whatever happened to proof-reading your comments then? Dyslexia makes you mix up letters inside syllabels in the wrong order, but not screw up entire texts as if you don't know the actual words or didn't make time to properly write them down.

    I'm not hating on you, I think there's something to it. But don't forget they are prototyping many of their ideas, which is why they crash. Its not about not being able to fly and gyros really simply assist, they do not fly for you.

  • @Aircraftfreak155 Ok I am dyslexic as well but for the fact of not using spell check and not spacing in the correct places online. That my friend is not an excuse, First off, both on PC and MAC it spell checks your entries in any box weather is be email or word document. Second, Dyslexia is about the pronunciation and misconstruing of words. In either speaking reading or hearing. As for Capitalization and inappropriate spacing of your words, I would attribute that to laziness. Great work Dave!

  • @Aircraftfreak155 hello, the whole point of all this is that they are experimenting with what works best.

    These people work long hours to build and test planes for us, as well as making a video.

    To be honest with you where would we be now without all our modern technology in planes. If im correct this is a scale model of the F-22 Raptor and if you havent noticed on the F-22 the thrusters are moveable (don't know the correct term) so they move up and down as and when the pilot wants them to.

  • @yakupcan1 Thrust vectoring?

  • @yakupcan1

    It's called "Thrust Vectoring"

  • @yakupcan1 thrust vectoring but ya real talk

  • @yakupcan1 thrust vectoring

  • @yakupcan1 that would be called thrust vectoring... and the trubines do not move... just the nozzles :)

  • @Aircraftfreak155 well pal using gyro's is called innovation .....if the US military thinks like u i guess the United states would have the funniest military in the wold....us fighter planes would be bi-planes and wielding single shot rifle and sabers...being top of your engineering class doesn't means ur better than the others...if ur best in ur class and u dont dare try new innovations like gyro then ur just a glorified repair man not an engineer top or not

  • @djmedic2008 haha yes mate that told him ! :D 

  • @Aircraftfreak155 What's wrong with you??? Gyros are not for beginners or noobs. Gyros are for improving the plane's stability. And do you realize that you are disrespecting to a YOUTUBE RC GOD here?? Dave is one of the best rc flyer/designer on youtube. You cannot even make a plane close to Dave's planes.

    So in conclusion, you need to learn to fly and learn about rc.

  • @RCFlyer132 I totally agree. Get a life, pal.

  • @Aircraftfreak155 and another thing ur still a mechanical engineering student ...if i what i read is right dave work once as a mechanical engineer for a big company before he decided to start his own thing in youtube