Mad Beast Motor Upgrade with HobbyWing System

[addictedtodat69]

Yes the guy you c is modifying his differential because he was having trouble with his Diff Gear'z cracking also, i correspond with him for help, he helped me with some really good info on how to get these body'z from cracking up so easy. Well thank'z, hopefully the Diff will last a bit longer this time ???

[addictedtodat69]

Yes i went to my local Hobby Shop n bought some Silicone Diff Lube, i will clean d part's again n apply d Diff Lube.

[addictedtodat69]

I you look on You Tube there are other people having the same problem with the Differential Gear's Cracking Up.

[nitrorcx]

@addictedtodat69 I don't have speakers on this computer but I found videos of people changing the differentials out to make the limited slip or modifying the differentials. We use silicone differential fluid.

[addictedtodat69]

Yes i cleaned all the part's and found the broken piece's inside the differential, replaced the broken part's and gave the Diff Gear Set a good dab of high heat bearing grease.

What kind of grease would u recommend for the Diff Gear Set ??? The Beast take's a beating bashing, i like this truck, i was just hoping there were some upgrade's for the Differential Gear's ...

[addictedtodat69]

The two large Gear's in the Diff Gear Set (MAD-UG0020) are cracking in half which in turn are destroying the Diff Out Drive's (MAD-MA2028), for the second time in 7 run's !!! PLEASE HELP, i will be more then happy to buy an upgraded Differential or some upgraded Part's, Please help ???

[nitrorcx]

@addictedtodat69 What fluid are you using when you repair the diffs and did you clean the all of the old material out when you repaired the diff? I haven't heard of the diffs breaking on the Mad Beast, I used to do the repairs on our cars and never had to fix the diff on a Mad Beast before, At the moment we don't have a upgraded diff or the Mad Beast.

[addictedtodat69]

I have broken the rear diff 3 times and have only had the Mad Beast EP for only 2 months and have only ran the Beast around 7 times, PLEASE HELP, any recommended upgrade ???

[nitrorcx]

@addictedtodat69 What's breaking in the differential?

[addictedtodat69]

Hello Bobby @ NitroRCX, I need help in a bad way, I recently purchased a Mad Beast EP and was wondering is there an upgrade for the rear Diff ? PLEASE HELP ...

[thestatefan33]

....it's bigger,thicker,longer

[penutbutter4luv]

Hey guys i just wana know how much did this motor and esc cost

[SLRCNetwork]

I'm waiting to see what you all are gonna do with the E revo! I got one today! And Love it!! I too have a Ezrun 150A Pro V2 ESC on it

[ysr50fan]

can the exceed rc dynamite pro brushless can take 3s lipo???

[sequential85]

hai..i have this truck..after running if about 20 times, the second gear in the gearbox strip off. i use only stock motor and esc. i think, upgrading to more powerful motor will caused the same damage even faster. It should be hardened steel for the all the gears and spur. not plactic.

[MrJustinTechno]

Hey nitrorcx please respond to this comment. Would I be able to send in my rc that's broken and refund it for a maspeed because mine is brushless and drift star and keep the rest of the money for all of the damages ? Please let me refund

[nitrorcx]

@MrJustinTechno Give our customer service a call, well be glad to assist you

[semperatis]

Gearing down means less teeth.

[HungQDang]

so this is what I suggested :) I want to know more about motors, what good to go fast what good to get more power, and some definition like Kv. It should be a helpful tutorial! thanks!

[ccrosekyle]

I bought the 1/10 nitro rally monster and my engine ran for breack in then i tuned it very well but now the truck wont start and the piston wont even move what should i do

[nitrorcx]

@ccrosekyle Give our tech support a call, they'll assist you with this issue

[traxxasblitz]

Can I use this in the syampede

[edwintresco]

Instead of using 2 note book paper it's easier to us just one printing paper since it's the same.

[shelby02403]

would this esc be a sutible replacement for the mamba monster from the Flux HP?? Price and Durability and Compatibility are my main concerns. thanks for the vids. Very much appreciated

[aznkid221]

is gearing down more teeth or less teeth?

[shelby02403]

@aznkid221 more teeth on the spur and, or less on the pinion to increace the ratio of motor turns to driveline turns. this would be gearing down. which will stress the motor less, draw less amps, but in turn give a slower overall speed with more "punch" off the line.

Hope this helps

[aznkid221]

@shelby02403 Thanks! and yes it does i'm a nitro and i'm looking to go electric to save money haha so i guess u can say i'm a noob :P Thanks so much again!

[krankedsilver]

man you have the dream job, wish i could work there

[crippledasspimp]

savage parts compatible?

[1999151]

@crippledasspimp yup

[Mrawesome3527]

thats what she said

[everythingboy13]

shit

[djwheelman091]

i bought from you guys, returned my item but never got my refund >:(

[nitrorcx]

@djwheelman091 Please follow up with our customer service to see your status. Refunds take 3-5 business days

[djwheelman091]

@nitrorcx i waited over a month!

[Losi4Sex]

@djwheelman091 HOLY SHIT!!!!!!!!!! UR A LUCKY DUCK! I HAD TO WAIT 3 MONTHS :'(

[djwheelman091]

@Losi4Sex nawh man i ordered it last september, still no refund. i was just sayin that 3-5 business day was bs, 1 waited over a month yet still none. ALMOST A YEAR AND STILL NO REFUND

[Losi4Sex]

@djwheelman091 DANG!

[mongdex]

@nitrorcx Is the Madbeast a rebranded Nanda?

I have a feeling Exceedrc are rebranded Nanda.

[jackknife0001]

is this car durable?

[twistedtristanfuente]

i need this!

[twistedtristanfuente]

@twistedtristanfuente first view!