Now for your mmw D3 has it right on I came up with the same number.
To calculate it you take:
Watts = AmpsxVolts
ml per min = 1000\seconds x 60
then
ml per min / watts
So 5.26 is your MMW
I also agree with D3 you need to up your E-Lyte concentration if you have not sealed your plate holes, seal them with vinyl hose or grommets. Did you clean your plates with vinegar before construction? If not clean them and that will help as well.
For mmw this is what you do, divide ml by minutes, in this case its easy, 1000/1= 1000(ml/min). Then take that and divide by wattage. Wattage is volts x amps, so 12.66x15=189.9watts.
So 1000/189.9=5.266 mmw ((ml/min)/watts) which is pretty danged good. nice cell build. increase elyte and get more ampps/production.
Great job on the cell,
Now for your mmw D3 has it right on I came up with the same number.
To calculate it you take:
Watts = AmpsxVolts
ml per min = 1000\seconds x 60
then
ml per min / watts
So 5.26 is your MMW
I also agree with D3 you need to up your E-Lyte concentration if you have not sealed your plate holes, seal them with vinyl hose or grommets. Did you clean your plates with vinegar before construction? If not clean them and that will help as well.
Fordenergy 3 years ago
For mmw this is what you do, divide ml by minutes, in this case its easy, 1000/1= 1000(ml/min). Then take that and divide by wattage. Wattage is volts x amps, so 12.66x15=189.9watts.
So 1000/189.9=5.266 mmw ((ml/min)/watts) which is pretty danged good. nice cell build. increase elyte and get more ampps/production.
d3adp001 3 years ago