E-Maxx Twin Titian 775's

[jacobcow111]

what do you do with the four wires? how do you connect this 775 if you only have 2 wires on the other side?

HELP??????

[TheWadsager]

how did you get space for two 775 titan motors?

sry for bad english

[gifts216]

PM me with the modifications you would need to install these motors. Thanks for the video!

[EmaxxRider]

how fast? i am looking to put the twin 775`s in the e maxx

[0RobotWarsIsTheBest0]

Damn who needs brushless when you have that?

[tigerfan3905]

It has a wheelie bar

[RChero1010]

That's a bumper? I thought it was a wheely bar!

[CrazySnake5000]

@RChero1010 people that wanna go more than 35-40 mph

[MORTUARY44]

did you have to change the speed controller on it or is it stock

[vf12497439]

My sons E-Max is trashed and needs an overhaul.... Looks like your E-Max would eat my 2.5 Revvo for lunch! I'm thinking my sons E-Max needs dual 775's.... Thanks for posting the video

[TheHuntingTerminator]

sweet! how did you get a mount for those motors?

[xXShadowRejectsXx]

damn very fast!!

[mrjato69]

awesome, i tried doing this with just one 775 and maybe it was hooked up wrong or something but it was deag dog slow, but yours is great i really like it, since ive tried that an failed i ended up doing the dual velineons, but your truck really impressed me and has me thinking of doing dual 775's on my summit!!!! thanks!!!!

[rustlervxlownallrcs]

how fast is it

[EMaxx21488]

Can you show me photo of this, how did you put this on 1EVX 2? Thanks

[heelys93]

is there anything you have to do to the motor mount to make them fit?

[itsallwood]

@heelys93 If you use the stock twin 550 motor mount you have to do some dremeling on the mount and a little on the case. on my build I couldn't go any lower than a 20T pinion. And that setup works out quite well. Of course I only have a single 775. The esc puts out the full 16.8 volts out of each channel so you can run twins off a single esc.

[boomhower0]

is it faster with the 2 775s or 12ts

[santclause1]

Dude thats pretty sick. i,ve just got E MAXX [ brushed ] it,s fine for now but when ny motors o go i think i,m gonna do this conversion. is it easy[ anything to dremel ] and do the motors connect straight up to the 16.8v evx2? are you running NIMH. cheers.

[TheChaseisbeast]

hey does it make a difference with the 775 twin and what batteries were u running

[TheChris1696]

Could you make a video of how you did it??

[ADRENALINE567]

did u go full throttle with it

[tigerfan3905]

@ADRENALINE567 yes, that's full throttle

[ADRENALINE567]

@tigerfan3905 I got single Titan 775 is it worth it going with two 775s like speed and all

[TheChris1696]

@tigerfan3905 How fast?

[iccsouth]

hey did u split the 2 positive wires and joined them together and im sure u did the same for the negative and just plugged in the wires,right?

[tigerfan3905]

@iccsouth You just cut the extra wires off and maybe put some heat shrink at the base of the wire.

[iccsouth]

@tigerfan3905 can u please post a slide show on how u did it? quick 30 second slide show so i could see how u put em both

[ole720]

are you running two escs with two 4S lipos because that i what i would do

why do you need two 775s i have one and it is fine

[tigerfan3905]

@ole720 One ESC, put 2 motors just to see how they performed. One motor does do quite well though.

[devante1313]

are you running a 2 speed tranny?

[devante1313]

hey. i have a few questions. how many cells are you running? and the titan 775 motors come with 2 positive and negative wires so how did you get 4 positive wires and 4 negative wires to fit in the esc? (did you just disconnect one + and - wire on each motor? i am doing the same thing with my emaxx.) thanks

[tigerfan3905]

@devante1313 I just cut one of each off and put alittle electrical tape around it. 14 cells

[devante1313]

@tigerfan3905 thanks for the reply. it helped! lol

[UGotKilledByACamper]

You runnin 2 ESC's?

[999benhonda]

what speed control are you using? is it the stock EVX-2?

[mathew6593]

what batterys u using

[bahij89]

hey how fast would you say it goes and to install did you cut anything are just had to put the motors in and set the mesh



[tigerfan3905]

@bahij89 you have to grind on the motor mount to get it to fit.

[bahij89]

hey how fast would you say it goes and to install did you cut anything are just had to put the motors in and set the mesh

[bahij89]

how fst would you say it goes and did you leave it all stock like th tranny like the plate thing

[999benhonda]

are you running the twin titan 775 on the evx2? if so, how? the titan 775 is meant for 14+ volts. just need to know. i just bought a titan 775 off ebay for my old emaxx, and might have to buy another after seeing your vid. also, what gearing did you use?

i am going to run my emaxx on 4s lipo once i get the new motor and completly rebuild the maxx.

[mr1993bowman]

do u haf to change out the esc to have the twin 775?

[hasek1616]

okay so i get that the 775 are better than stock, but how does one 775 compare to two 775's? Also with the dual titan 775's are you using the stock evx-2?

[patrick4686]

how fast does it go with 2 775's

[tigerfan3905]

Sorry, just got my computer back up. So to answer some questions. 1 775 is better than 2 550, temps on the motors are great, esc does get pretty hot but not a problem. It is not to hard to install, if you get 25t pinions you don't have shave on your tranny (with the 2 775's it is actually low geared, it's what I'm running in the vid). It does however take alittle time to prep, make sure you line up your motor before you open up your mount holes so that your gear mess properly.

[100traxxas]

Dose the Titan motors holes line up with the motor mount, or did you get different one, or drill out new holes? and was it easy to install, because i'm gonna do it when i get my E-Maxx in two weeks.

[guitarplayer897]

does the 775 keep the temps down better than the 550's? & what do you think is a better set up, (2)550's or (1) 775??Sweett video. 5/5*

[ADRENALINE567]

How did u hook up the two motors to the esc and is the esc stock

[tigerfan3905]

Promatched are the best nimh buy far in my opinion. These are 4200's and they have 5000's now. I also like the tekin battery doctor 8.0 to discharge and balance your cells.

[rumblebeemonster04]

i think you should make some more videos

[rumblebeemonster04]

hi i like your truck idea i am going to do it but i do not know what type of batteries to use. so your batteries last about 30 min right . 2 15 min runs. if any knows the like top 5 battery brands in nimh 8.4v 7 cell help me please . thanks

[Trilordy]

It has the power just not the speed, go with a monster mamba 2200Kv and 2x 3 cells lipo. Then it will be a monster.

[76plymouthscamp]

would you recommend this engine setup or the 700 HO setup for an older style emaxx

[MrLarzzon13]

top speed (with dual titan 775)?? plzz answer

nice car and vid 5/5

[tigerfan3905]

Don't know a mph, but it is faster than stock 550's, because you can gear them alot higher. Not near as fast as brushless though.

[MrLarzzon13]

is it faster than 30 mph??

[traxxas91296]

Are you using the stock ESC??? and how many cells you using is it a 7 cell battery pack 5000 mAH???

[albpir96]

can i putt twin titan 775 on the stock motor plate??

or can i putt a single 775 on it??

sorry for my bad english!!

[TraxxasTuff]

So will the two 775's fit together on the stock E-Maxx twin motor plate or is it aftermarket?

[tigerfan3905]

I'm using the stock plate, but you have to mod it.

[fredburger130]

what batts and how long do they last

[tigerfan3905]

30 bucks, it's from Robinson racing.

[traxxas91296]

How much for 1 775 titan motors??? and where did you buy the 25t gearing???

[littleAZN248]

i dont know if its just me but the truck actually sounds smoother with the 775's. Tigerfan3905 with that much torque how is your drivetrain holding up?

[tigerfan3905]

No problems, when I first got my E-Maxx I broke the center shaft from doing jumps and landing in some rocks. One got lodged in and it broke. I just try to avoid rocks now.

[p38lightning7]

i want to put the titan 775 in my slash

[littleAZN248]

Bad idea you won't get enough rpms unless you run at least 14volts. But if you manage to do that you'll have one sick ass slash. Oh yeah you also got to redrill the motor mounts since the mounting points on the 775 is wider.

[lizardmannnn]

get the mamba max titan 775 is a torque motor not speed it will reduce your top speed.

[littleAZN248]

that is depending how you gear. If you gear like tigerfan3905 did you'll het stock speeds. toss on a 33 tooth pinion then your good to go with plenty of torque still to spare. However, two of thoose motors are heavy

[traxxas91296]

So 2 775 Motors are you using the stock EVX 2 waterproof???

[tigerfan3905]

Yes, just clip off the extra leads on the 775's and it works great.

[nydrm90]

wow, you put two Summit Motors that's cool. I've never seen that before, but you can see the power. I'm sorry, I didn't get it, are you running dual seven cells or just one. I don't know if the esc will run with just one or not. Is the 25t pinion larger or smaller than stock?

[tigerfan3905]

The stock is 19t, so it is much bigger, or higher you could say. I am using two Promatched Ener-G 4600's, stock ESC.

[721069]

well to tell you the truth i ran my titans with one batt and then i titan with 2 batts and no problem!!!

[tigerfan3905]

I never said you couldn't, I wouldn't know because I don't really see the point in running just one.

[721069]

you have less weight and super long run times!!!

[tigerfan3905]

Tell you what, your stupid ass can use one battery or one motor, or two missmatched batteries. I'll use two batteries and two motors and you find somebody elses vids to talk about that stupid shit.

[721069]

OK fuck you to. :)

[trxslashdriver]

dude my friend has an e revo with two kershaw designs revolver motors that cost 80 bucks, you keep the stock esc, and u hit in the mid forties with twin seven cell 5000 mah nimh batteries. its GNARLY

[MoRRisoNRisiN]

its not as fast as this trucks goin.

[trxslashdriver]

your right. the e revo is way faster.

[sskv2]

hi, how km/h or mph?

[jmey107]

crazy torque! so cool

[dmathis49]

i got a ?. can the motors use the 9t pinion gears i have and will they fit up to the stock motor plate

[tigerfan3905]

You have to use the 5mm pinions, and 9t would be way to low. I'm using 25t on it and it has alot of torque and speed. Robinson racing carries a wide variety of 5mm pinions, and yes you can use the stock plate but you will have to drill it out alittle to get the proper mesh.

[slice259]

So your running the stock esc on what 6 or 7 cell?? also How long of run time do you get with those 4600s bashing like you where?? Thanks

[tigerfan3905]

7 cell, two 15 min runs.

[Turboking09]

hey man, did you have to buy a different motor plate???

[tigerfan3905]

No, just had to drill some larger holes to mesh the gears. It wasn't that hard, just takes alittle while to get it right.

[Turboking09]

sweet man, how did you run your wires from the 775??? cause i think the motor has 2 pos. and 2 neg. leads on it...how did you wire the two motors for the speed contrl.?

[tigerfan3905]

Cut one of each off, and wire it just like the 550's.

[Turboking09]

aight, that does make sence...thanks again, and im definatly doing this to mine...PCE

[Turboking09]

then you'd definatly need a cooling fan for the extra amperage draw for the ESC

[tigerfan3905]

You could, but you don't have too. It still runs on 14 cells.

[chromecarz00]

What esc you running?

[tigerfan3905]

EVX-2(stock)

[tigerfan3905]

Hell yeah!

[littleAZN248]

would you sway this is faster than the original titans?

[shittybill93]

wow that thing is nuts for brushed! you should try something like 5s lipo!!

[sskv2]

12 or 14 cells nimh? or lipo 4s? i want work this mod me too! but the titans 775 have 4 plugs & on the standard titan 550 there are olny 2 plugs...how did you do? please answer =)

[tigerfan3905]

Just put your motor in with pinion to get an idea of where it needs to be to mesh with the spur, and drill out the holes for your mount screws. There larger than the 550's (mount screws) and it may take a few grinds to get it right. The 25t pinions give enough space to fit them, and as you can see it still has plenty low end.

[fathead431]

what did you have to do to the motor mount?

[tigerfan3905]

Motor and batteries no problem, ESC gets alittle hot. I don't have a hole in my body either which would help with that. But I can run 10-15 min before I need to cut it off. Batteries last me nearly 3 good runs, there incredible for nimh.

[14981fc]

how's the temp on ESC, motors and batteries?

[tigerfan3905]

I can deal with that!

[GreenJeep1998]

Great video, looks like it has some trouble keeping the back tires on the ground too!

[tigerfan3905]

The promatched batteries give it the motors a ton of power. I was using venom and got about a 1/3 of the power seemed like. Also the MGT 8.0 tires are tall and pick the speed up alot over the stock traxxas tires.

[beergut1022]

Pretty Fast for a brushed motor....

[bigsmooth71]

Fast and quiet nice video!