The transformer on the right is from a television set (old picture tube type tv). The components on the left are a driver circuit that pulses the transformer with battery volts. A battery connects to the handle (not shown in picture). this is my best guess as to how it works.
I'm guessing you're using a coil of some magneto etc. to strenghten the voltage... any change of getting the schematics for this? I would LOOOVE to see how this beauty works, ofcourse I wouldn't build my own version but my lust for knowlege is craving for the blueprints of this little gadget
@PLEDGEY looks like about 50 KV but it's driven by a rechargeable Battery so the ampage has to be low. It's just a Paralyzer, it's intended to stun you not to kill you.
@Mr420ways OK, there's a Market opening up. The first Attempt looked like a medival armored Suit made out of tiny Rings from a Copperwire. It was heavy and worked as a Proof of Concept but not reliable enough.
The Race has started, there's a lot of Money to earn for the first one who comes up with a stunproof Suit.
How many volts is that rockin' to get an arc to propagate through like 2.5 inches of open air? I don't feel like doing the math, and I can't remember the dielectric coefficient for normal air anyway, but that's gotta be 750kV at the very very low-ball least estimate.
The multiple image of sparks have to do with spark pulse duration, as well as the scanning and readout times of the CCD chip. Different spark pulse durations, and spark repeat rate, as well as different CCD chip scan and readout specs (from different camera, or change of exposure time on your existing camera, or frame rate of the camera) would all effect this vertical pattern.
I may have seen the schems for that in a McGraw - Hill book!! ...They had some pretty cool stuff..."negative ion field generator" that makes people feel sick when they pass through the feild! Stuff like that - good job man! That's nasty!
@Stallnig pretty sure if you got somone on the top/back of the neck, that amount of juice would interrupt brain activity and you would die...it would be pretty fast and painless
Free energy has been here all along ,But the Establishment doesn't want ppl to know this,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Start the energy revolution!
Free energy has been here all along ,But the big oil corporations don't want that technology revealed,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,The revolution begins!
I think that the amount of x ray radiation is so small from an electrical arc that it wont expose the film. I believe that if you use a flyback transformer to overload a cathode ray tube you can create x rays powerful enough to expose it.
LOL, an old LOPT and a little tesla coil....very nice, how many turns did you use in the secondary ???? also, I take it you're using the driver that was in the drill ???......lol...a PWM EHT bug (or nasty person) zapper......good job !!!
Why do I see a green shift prior to spark and a red shift after? Is the EMP affecting your CCD? It also seem to displace vertically by some measure. At first I thought this was a frequency shift in the camera, but the color shift and line shape doesn't make sense.
It's for killing big bugs that I don't fancy picking up (NOT spiders). It's also a variable output high voltage power supply, and can be used in high voltage experiments. Mostly it just makes nice big noisy sparks.
Looks like a taser on steroids.
softbear30 2 weeks ago
home security, robbers won't know wtf that sound is until they're in a cop car XD
Javierm0n0 2 weeks ago
that aint no tesla coil...thats a "dont make me touch you with this" gun
Mr420ways 4 weeks ago
Axis TartGit please make an tutorial :)))
88enri88 2 months ago
Probably very similar to a flyback transformer.
shadywalker 3 months ago
For stimulating the evacuation of feces.
TheGetintoit 4 months ago 3
Is that a Microfusion cell from fallout? (:
Ninjadude176 4 months ago
The transformer on the right is from a television set (old picture tube type tv). The components on the left are a driver circuit that pulses the transformer with battery volts. A battery connects to the handle (not shown in picture). this is my best guess as to how it works.
1framistan 4 months ago
I think it's a flyback transformer connected to a doubler or tripler
TheError404 4 months ago 2
wonder if i could light my weed with it?
thatguru877 4 months ago
Comment removed
diehard951 4 months ago
@thatguru877 right?!? wed realy have a vaporizer then~!
Mr420ways 4 weeks ago
@Mr420ways I could heat up my hash skillet too.
thatguru877 3 weeks ago
pretty shocking...
L0GAN811 5 months ago
I'm guessing you're using a coil of some magneto etc. to strenghten the voltage... any change of getting the schematics for this? I would LOOOVE to see how this beauty works, ofcourse I wouldn't build my own version but my lust for knowlege is craving for the blueprints of this little gadget
windsormagistus 5 months ago
What voltage/ampage is that thing putting out?.
PLEDGEY 5 months ago
@PLEDGEY looks like about 50 KV but it's driven by a rechargeable Battery so the ampage has to be low. It's just a Paralyzer, it's intended to stun you not to kill you.
smellcaster 5 months ago
cool
AcePilot101 5 months ago
It is very, very impressive, but you are some one I don't want to meet in a dark alley !
magna59 6 months ago
Redneck's Tazer
So1othurn 6 months ago 3
new tazer that can taze hulk
415frn 6 months ago
fuck those tazers they have nowadays imagine some one chasing after you with one of those
aderandie2 6 months ago
@aderandie2 this is not a Taser, a Taser shoots wired Hooks to deliver the Energy to the Victim.
smellcaster 5 months ago
@smellcaster taser or stungun are the exact same thing once you have felt them both from law enforcement and i have...now shut up, know it all
Mr420ways 4 weeks ago
@Mr420ways this leaves only one Question: Can a metallic Fabric inside my Clothes deflect the Energy from me ?
Maybe i have to figure it out and hopefully get it working.
smellcaster 4 weeks ago
@smellcaster id buy a metalic coverall if you invented one !
Mr420ways 4 weeks ago
@Mr420ways OK, there's a Market opening up. The first Attempt looked like a medival armored Suit made out of tiny Rings from a Copperwire. It was heavy and worked as a Proof of Concept but not reliable enough.
The Race has started, there's a lot of Money to earn for the first one who comes up with a stunproof Suit.
smellcaster 3 weeks ago
omg god thats amazing
durango19984x4 7 months ago
all i can say is "DAAAAM!"
Imppyman09 7 months ago
Can you make an instruction?
SlowMotionTechno 7 months ago
THAT DOESN'T DRILL ANYTHING....A STUN GUN IS CHEAPER,,,,,AND SMALLER.
Tiggerpilot 7 months ago
@Tiggerpilot YEAH BUT NOT AS AWESOME!!
thatdude2468 7 months ago
@Tiggerpilot the point is he made it himself and this is way stronger than a conventional stun gun... im pretty sure this thing could kill you.
psapocalypse 6 months ago
@Tiggerpilot its smaller but not cheapeer they usually cost around $300... well at least the ones i've seen
babyinablender252423 5 months ago
How many volts is that rockin' to get an arc to propagate through like 2.5 inches of open air? I don't feel like doing the math, and I can't remember the dielectric coefficient for normal air anyway, but that's gotta be 750kV at the very very low-ball least estimate.
Dreadp00l 7 months ago
Hmm, I wonder what would happen if you touched it?
TomRiddleRF 7 months ago
The multiple image of sparks have to do with spark pulse duration, as well as the scanning and readout times of the CCD chip. Different spark pulse durations, and spark repeat rate, as well as different CCD chip scan and readout specs (from different camera, or change of exposure time on your existing camera, or frame rate of the camera) would all effect this vertical pattern.
BankaiIchigo12345 7 months ago
Stick your finger in there dude!
UcanLEEKmaDEEK 7 months ago
taser
nate0398 8 months ago
good oscilograf
redis46 8 months ago
extreme tazer FTW!!!!!!!!!!!!!
kidshortman 10 months ago
i want...care to post specs? instructions?
like...waht the magneto is out of?
montey1017 1 year ago
@montey1017 wow im stupid...whats the transformer out of? like a laptop?
montey1017 1 year ago
JESUS CHRIST!
GameRock123 1 year ago
I may have seen the schems for that in a McGraw - Hill book!! ...They had some pretty cool stuff..."negative ion field generator" that makes people feel sick when they pass through the feild! Stuff like that - good job man! That's nasty!
Bunnytoes666 1 year ago
man 1: come on then sucker man 2: pulls a drill out
man 1: hahahaha whats that gonna do
man 2: dzzzzzzzzzzzzz
man 1: Aaaaaaaaaaaa
man 2: whose laughing now fool
theMRJordan1989 1 year ago
This has been flagged as spam show
man 1: come on then sucker man 2: pulls a drill out
man 1: hahahaha whats that gonna do
man 2: dzzzzzzzzzzzzz
man 1: Aaaaaaaaaaaa
man 2: whose laughing now fool
theMRJordan1989 1 year ago
This has been flagged as spam show
man 1: come on then sucker man 2: pulls a drill out
man 1: hahahaha whats that gonna do
man 2: dzzzzzzzzzzzzz
man 1: Aaaaaaaaaaaa
man 2: whose laughing now fool
theMRJordan1989 1 year ago
Comment removed
theMRJordan1989 1 year ago
what amount Watt power you got afom it??
sniperacs 1 year ago
is this thing deadly?
Stallnig 1 year ago
@Stallnig pretty sure if you got somone on the top/back of the neck, that amount of juice would interrupt brain activity and you would die...it would be pretty fast and painless
montey1017 1 year ago
join me and thumb down all the "Dear santa"
sweftwp 1 year ago
This has been flagged as spam show
Free energy has been here all along ,But the Establishment doesn't want ppl to know this,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Start the energy revolution!
narragansettharco 1 year ago
Are those sparks falling downward an effect from the camera, or can you see them in person with your eyes too?
ronaldoelpaso 1 year ago
but will it blend?
fodasevoce 1 year ago
This has been flagged as spam show
Free energy has been here all along ,But the big oil corporations don't want that technology revealed,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,The revolution begins!
rebelliouseoagj 1 year ago
make a tesla lawn mower!! :D
WhereDoesItAllEnd 1 year ago
i don't get it......
MrEinstain 1 year ago
i want to make one!
demonofrazgriz333 1 year ago 5
I'm guessing from the Maplin solder you're in the UK... flyback transformer and what else? I so want one of these!
TheChipmunk2008 1 year ago
This has been flagged as spam show
DONT TASE ME BRO!
RobMonty1987 1 year ago
Homemade Tazer!
Bobster986 1 year ago
That looks like a lawnmower magneto...
icbm345 1 year ago 6
@icbm345 maybe need some glasses? :P
AxisTarGit 1 year ago 2
@AxisTarGit
I already have glasses :P
icbm345 1 year ago
@icbm345 yes, but do you have a lawn mower?
AxisTarGit 1 year ago 13
@AxisTarGit
Yeah
icbm345 1 year ago
@icbm345 ok, reckon you can get a 45mm spark out of the magneto? ;)
AxisTarGit 1 year ago 5
can u make me one!?
buchreitz1 1 year ago
One hell of a stun gun...makes the police version look punny!
laser74hobby 1 year ago
schematics???
bwoodcracker 1 year ago
it looks like the curent is transfering to the drill and going twords the back of it, why is that?
GoodSumeritan 1 year ago
looks like that would be really painful if you ended up on the wrong end of it
MyManDan 1 year ago
taser?
Spike00513z 2 years ago
its cool that the lens reflections inside your camera make it look like the bolts of rainbow lightning are jumping off the gun.
doctorluigi 2 years ago
what do u use to switch the dc power from the bat to the flyback, a 555 or a switching transistor?
Depthhider 2 years ago
How did you make that?
Posternal 2 years ago
You're MAD! I tell you MAAAAAD!!!!
ritchie56 2 years ago
scare the shit out of traffic wardens with it !
Realityinplay 3 years ago
If you stick ur hand in front of it and take a picture with film, I've heard you can make an X-ray device
Crozonexz 3 years ago
I think that the amount of x ray radiation is so small from an electrical arc that it wont expose the film. I believe that if you use a flyback transformer to overload a cathode ray tube you can create x rays powerful enough to expose it.
biowerks 2 years ago
Make two of these with only one spike each and you can go sparkman!
Akhiloth 3 years ago
LOL, an old LOPT and a little tesla coil....very nice, how many turns did you use in the secondary ???? also, I take it you're using the driver that was in the drill ???......lol...a PWM EHT bug (or nasty person) zapper......good job !!!
zappotron 3 years ago
weeeeeeeeeeeeeeeee
lazzer408 3 years ago
and point of this device is what ?
lestube001 3 years ago
lulz
DarkAvatar1313 3 years ago
i dunno, i can think of quite a few possible uses lol
sovietduck 2 years ago
Whoa! Thats HOSTILE!! Can you pass scemathics for that????
rismorismo 4 years ago
I love that you have too much time on your hands
IdiotSlapper 4 years ago
Why do I see a green shift prior to spark and a red shift after? Is the EMP affecting your CCD? It also seem to displace vertically by some measure. At first I thought this was a frequency shift in the camera, but the color shift and line shape doesn't make sense.
Hmmm.
AdminOnDuty 4 years ago
That's true, but it doesn't sound as cool.
"Flyback Oscillator Voltage Multipier Drill" isn't quite as snappy :P
AxisTarGit 4 years ago
its more of a flyback not a teslacoil
hvhaxor 4 years ago
amazing1 dot com ( i cant enter a url) check these guys out if you want to try this at home ( careful now ) great source of transformers.
AxisTarGit 4 years ago
It's for killing big bugs that I don't fancy picking up (NOT spiders). It's also a variable output high voltage power supply, and can be used in high voltage experiments. Mostly it just makes nice big noisy sparks.
AxisTarGit 4 years ago
please excuse my lack of knowledge on this item .. but what is it for? Is there any good practical use? Please let me know thanks!
regmedia 4 years ago
so... basicly... you made a taser from old junk?
COOL!!! :D
how much time did you need?
Hyshinara 4 years ago
depends which end of it you are on :P
AxisTarGit 4 years ago
wow...that looks safe...
501404 4 years ago
It's fairly basic electronics. It was constructed by using parts from old TV's and a cheap cordless drill.
I did fancy book learning at technical college :)
AxisTarGit 4 years ago
whoa cool how did you learn about this? how was this thing constructed? where did you do to school?
ripperarn 4 years ago