Smart parts Ion disassembly

[crazylatinomex]

can KY jelly work?......

[cityfrags]

holy shit now i dont want an ion

[bekf25]

@cityfrags

this is the old style ion, the new ones are much simpler to take apart. This is my video from 4 years ago

[bignaggerjim]

hey i bought a friends ion and the balls dont shoot as fast as they should they drop off after about 10ft but my reg says that there is 180psi going through the gun and i upped the dwell as far as it can go but the balls stilldrop off I NEED HELP what can i do

[lizardlover12]

ITS SMART PARTS WHAT DO U THINK...LOL

[ThePenguinProduction]

Hey I just recieved a USED ion as a gift from a friend of mine . After I unscrewed all the screws why is the coiling on my motherboard type thing red and yours looks black ??

[lizardlover12]

thats doesnt really matter..there just different colors it doesnt mess up the performance

[abdulios]

well the barrel covers it so... in the end it doesnt matter

[bayareapb]

12 or something

[phatty363]

make a vid about how to program it!

[bayareapb]

No.

[thegame22]

wow u succ

[bayareapb]

Not really.

I couldn't show you much becuase I don't have an Ion and Haven't had one for like a year.

[baseballhitz01]

sick vid

[bayareapb]

meh.

[jonee140]

? why is this spam

[SlickasEver]

its called Feel Good Inc. by the Gorrilaz

[paintball164]

PIMPED OUT

[DylanL18]

i would get a xe if i were, its the same as an ion but newing better

[jonee140]

xe is awsome

[iPodsAreOverrated]

xe. the xe has a bob body so you dont need to take the gun apart like this video you just need to unscrew the backcap and the bolt will slide out

[jordanpaintball69]

opposite,  if you want a higher ROF put your dwell lower (but make sure it flly cycles) and "0" out the Recharge rate (ROF)

[skullhead540]

thx, this video was very helpful

[bayareapb]

thx.

i liked it when i had it

[dyeCBMdye]

hey i have a smart part ion also i was just wondering what to set my dwell to.

[bayareapb]

depends.

[jordanpaintball69]

nice vid.! thakns

[randomguy9898]

yes!but, its not reccomended without an antisiphon tube.

[5444110]

take the rings out of stock feed neck and iny electric hopper will fit sept evilution

[fortminor764]

does a stock ion feedneck fit a halo b?

[bayareapb]

ya buts its a bitch to get it in/out. ive heard putting some dow33 on the orings in the stock feedneck and spinning the halo clockwise to get it in.

[sharkhunter199]

are u from the tampa bay area? if so what field do u play at

[bayareapb]

no im not.

[randomguy9898]

1, like the music, 2 im saving for one and good color choice.

[doccody4]

y dont u shut the fuck up u fuckin queer

[driverz00]

wow congronts on taking upart to gay ion now your reward is to shoot yourself

[bayareapb]

haha dont have this gun anymore. so eat shit kid

[loopy98]

lol i dont have my ion either :D

[xKbaXx15]

go the fuck away..if you dont like SP ions then why do you insist on watching videos about them? are you fucking retared? maybe you should shoot yourself instead

[MLGskullking117]

is it alright if i use core super slick oil on my ion. I was told that i shouldnt but idk. it needs to be lubed bad so will it hurt the ion at all? if someone could get back to me on this by the end of the night that would be cool. thnks

[shannywanny]

this is bayareapb but im on my sisters comp.

dont. use dow 33 which is pretty much sleek.anything dow 33 will work.

[MLGskullking117]

so it is alright if i use the core oil.

[shannywanny]

NO. did u even read what i wrote?

[MLGskullking117]

oh i was reading it wrong my bad. Well then what is the oil used for?

[polotrigger]

very helpful!!! Thank you! : )

[lj0317]

why would you post that... go hang yourself, do us all a favor

[pbkid808]

hey great vid!! it helped me out alot. i have a question tho. do you think that i should feel spoiled if my dad spent around 285 dollars on an ion for me with a virtue board and a cp trigger??

[knoxy082]

u wont get an ion , trigger, and virtue board for that much dude.. :p

[theclaw195]

you can get an ion for that amount... maybe a trigger...

[MIXMASTAPWN]

all you people who said this helped your all homos for owning the gun that won the "homos choice awards" 3 years in a row good job lets waiste money on a shit marker oh wait what am i saying why should i care cause your the kids that i pwn in paintball thanks for getting shitty guns!!

[myballsinyourface1]

Wow. so sad. just becuase you have better equitment and shit doesnt mean u can bash the noobs, saidly every player was a noob at one time so STFU.

[MIXMASTAPWN]

my gun was less than an ion!! and its still a better gun WGP Superstock if kids would quit jumping on the damn band wagon and quit stop and think and have their own style they wouldnt be so noob to get an ion friends dont let friends buy ions. and i was the 1337 noob

[lj0317]

how old are you, 12???

[rayandkris]

yo bitch i will kill you moutherfucker suck dick fuck head

[ogdencur000]

usefull video, but gay music lol

[knoxy082]

thx dude this helped a lot

[vadneau]

wass a qev???sorry if i sound like noob im just a good player the parts n shit mess with my brain

[eatinghotfries]

qev = more air. faster i think i dont know im noob also.

[vadneau]

hi ummm i just bought a 3000psi tank (metal not fiberglass)how many shots will i get outta that for my ion everything is stock on it plz help

[bayareapb]

hybrid gen 6 i think, they're not made anymore because of the new run of hybrid grips.

[Kellsooner]

thanks, gettin an ion soon, my friends have one and they'll help with me it, but this was also very helpful

[hawwianpride808]

very helpful thanks!

[bayareapb]

wtf, this is basic teardown. no one dissambles their regs, plus there is another vid about so that i dont need to address it.

[bumber818]

nice vid this is very useful! i like it!

[bayareapb]

thx

[bumber818]

i dnt wanna be a bother but wats da name of da song dats playing in da begining?

[bayareapb]

read the credits. both sonegs are there. name and artist

[strikeshot09]

feel good inc. by the gorillaz

[pollywag666]

you should make a vid on how to change the body and the ion because there aren't that many videos on how to do that

[bayareapb]

dont have gun anymore

[Nl0val3nt3]

pollywag, to disassemble to the gun like in the vid, but instead of putting the old body on slide a new one on, for the reg cover just unscrew the reg and slide it on

[pollywag666]

nice vid and i liked the music but i couldnt see some things

[bayareapb]

gooch, thx for el complimente

[pollywag666]

im getting a brandnew ion off ebay and im trying to get a head start on this new gun so it helped me a lot........im wondering where the qev goes so if u could help me with that it would help a lot

[bayareapb]

look at the vid. pause it if u have too.

[pollywag666]

k thxs

[halosux4life]

fuck i hate those allen keys i broke like 3 of them so i bought a rachiting set from snap on

[biobiololo]

wow i dont even have the little ring that you take off your botl , wtf?!

[vadneau]

o kk thx i thought the gun couldent shoot harder than 270 fps lol plz reply im unsure thx your the best

[vadneau]

ummm i just bought an ion and ive seen on websited that its a "low preasure gun" could you tell me how to up my preassure to like 270 to 300 fps??? plz

[bayareapb]

yuo arent supposed to run your gun higher than 200 psi

[vadneau]

but tournys are 300 fps and at the indoor place i play(paintstorm) it is 270 minimum plz reply

[bayareapb]

ya u turn up ur reg and chrono at 300

[HaloSpyder88]

what exactly do eyes do?

[bayareapb]

they do what your eyes do, see things... in this case the paintball. when the eyes are on and they "see nothing" it wont let the gun shoot, when they are blocked, the eyes verify sumthing is there and will let the bolt hit the ball/rock/squeegie? depending on whatever you put in the breech

ya im bored.

[Raphy013]

still i forgot to comment this bud nice vid. and song :)

[bayareapb]

gooch and ty

[nickpas1994]

i hate people who think the ion is plastic... they should see 4:55

thanks for posting it its a great video

[bayareapb]

thanks for the positive comment

[iwin99]

as in, any of that?

[iwin99]

that wasnt directed towards me was it?

[bayareapb]

o no lol your alright i was kind of agrivated at ion998. pms and dms ftw haha

[aCex088]

Nice vid. Helpfull. Dude whats the 1st song title? Artist? Thanks.

[bayareapb]

lol i've already had a couple ppl ask me the songs and all. both songs are in the credits. i put them in the credits so nobody would ask this question lol just look in the credits.

[aCex088]

dame lol ur right, didnt pay attention. thanks :D

[ion998]

this was stupid take away the music fag

[bayareapb]

well are you one of those ion idiots that think their ion is better than a TRUE high end gun.ions shoot prety fast but u have to put some cash into it. with my dm its AWESOME bone stock the only things i might change are small things for ease and comfort.

[bayareapb]

continuing on: dont comment on my video when 153 ppl have favorited it i have 128 comments mostly good saying nice video and all this and i have a have quite a bit of ratings and they arent bad. this video was to help people take apart there ions.

[bayareapb]

continuing on yet again: you probably had your parents buy your gun and cant paintball and come on youtube flaming other peoples vids when you have NONE yourself. seriously i dont even know why im typing so much and wasting my time on a worthless asshole who cant paintball latr beezy

[iwin99]

lol

[iwin99]

jeez, ill stick with my proto that doesnt have a million peices, and has easy to clean eyes.

[bayareapb]

and ill stick to my dm

[bayareapb]

i dont even have this gun anymore but thx anyway.

[paintballsandwich]

very very good, thanks

[bayareapb]

i had a cp on off. it was great i loved it. and i dont under stand the part about thge feedneck..

[Meyers7013]

is it easy to put a board in the gun?

[bayareapb]

sumtimes it doesnt fit right but other than that its easy

[Zenoph]

Man... That is a lot of work to get to the bolt...

Chances of ruining the board/eyes seem high.

My PMR seems like a dream compared to that.

Not to put down the ION, I have been looking into one of them for a friend, never used it though.

[bayareapb]

matrixes ftw i shoot a dm now so its all good.

[outlaw681]

thanks for the video just cleaned mine :)

[bayareapb]

good

[hitme09]

Hey was I not supposed to grease the whole bolt, am i only suppsed to do the o-rings?

[BioWeaponFox]

that was just what i needed to see, good video and thanx for the help

[bayareapb]

clippard

[gochiefs3127]

wow nice vid man... saves me from beaking my gun lol

[PaintbaLLKinG07]

what is the name of the song its funny*

[PaintbaLLKinG07]

whats the nam eof the song its funny

[wamp25]

ok im getting this gun pretty soon..but U HAVE TO DO ALL THAT? How often do u have to do it? And is it really that hard? Im too scared to do it. Wat if i dont know how to put it back togther?

[faqhnhostile]

I just installed a new techt L7 ion bolt and Smartparts 360 Qev and when i tried to fire my gun it just releases air but the bolt doesn't move? anyone have any similar problems and can help?

[aliastimmy2k5]

actually they r complicated. I dont own one, but i hear it can be a mess to do sometimes.

[aliastimmy2k5]

ok i dont have an ion, but if i did this would not have helped at all cause its gay....... haha jk, No im kidding dude if I had an ion this would have been the best vid 2 show me. Good job and I do have a friend that owns 1 so maybe he would wanna check this out. Good work

[johnskrn]

thank you very much

[p8ntballeeeeeeeeeeer]

o really.......??? i still dontreally get it. :(

[xebetax]

m8, nice one. do any of you know what might cause the gun to not shoot when triggered all the time. Because i had to shake it to fire. Even with the eyes off it still did the same thing.

[fister16]

ions have that eye in it so it wont chop balls so your gun wont shoot if the eyes are off or if there is no ball in the chamber the ball has to drop in to the chamber because when it dose it goes past that eye and tells the gun there's a ball in the chamber and if your not using an electric hopper the paintballs sometimes get stuck in the hopper so you have to shake it a little to get the balls to drop in to the chamber try not filling your hopper up the whole way

[Zero536]

if u havent changed the ion board... u have the stock board...

[hitme09]

cqan u show how to replace ball indents plz

[Schorpietje]

Thnx, ur a great help

[pencils900]

it takes awhile to take this thing apart, but still its a great gun for an even better price

[Impaler921]

you are far from efficient in the time you take, i am going to post a video and do it in half the time gimmie till fall and i will pst it i need to get my camera back

[bayareapb]

ok wow i did not rush as i did this obviously, i did this to show people how to take it apart. this isnt a "how fast i can take apart my ion video" notice i point to where to unscrew things. just shutup, you fail at life.

[paintballer4lfe]

if you didnt change your board then its the stock

[paintballer4lfe]

yea use compresed air so the liquid co2 dosent get in the gun. nice 1st song 2nd's......ok i guess but NICE VID overal

[5444110]

now ican ansor that on i got min back just for puting c02 in it so do not do it

[clayphoon326]

nice vid. wich some1 made a nerve disassembly video lol. so complicated to take apart

[IonOwnedByMe]

u can use an ion with co2 but i recommend ti use anti-siphon or a remote system that will reduce leakege and other gas problems other than that the best is compressed air...

[bayareapb]

thx for all the positive comments guys.

[jhendrix7911]

why the hell would you use co2 in an ion anyways?!

[PaintbaLLKinG07]

no you cant use C02 with an ion dumb ass

[bouboulebigshow]

nice video

[jpan11]

dumb asS tell us to take off the grip first

[SoldierofSorrow]

oh man the first time i tried to lube my ion i fuckeup ripping the wires apart

but now on myt second time i did exactly wat u did but this was a year ago but i just wanted to say something bout it lol

[mezzy4548]

thanks man!.......very helpful :D

[C04X141]

Very helpful, thanks, also nice Ion.

[sillylarry93]

thanks alot of help, and saved me 50$

[dbloxhoella]

nice! a lot of help!

[5444110]

haw do you get fully and ether stuff

[pballin77]

nice job

[Haydoosturn]

manual tells you how to take it apart, clean ut, and reassemble it properly

[whtchacolate]

thanks man i been meaning to change the body color of my ion but never understood how to take it apart but it was tooooo easyyyyyyyyyyy with the help of your video thnks, Michael =p

[rocknwill003]

ahhhhhhh you have to do all of that to put a new body kit on thats so confusing

[BlazinAsian35]

Is it just me...or is it nearly impossible to pull out the macro line end on the ASA side?

I'm afraid I'm gonna damage it if I pull harder than I am right now...which is still pretty hard.

[PodRacer012]

ill do a video response just to show you...some other time.

[PodRacer012]

yes i did, i followed my instructions manual, and your video almost exactly.

its just..i cant get my board out of my grip frame...like, its stuck almost.

[PodRacer012]

Hey...I just recently bought an ion, and when i get to the point where i try to seperate my grip frame from my body/board, i push/pull slowly and carefully, it doesnt come out...help me?!

[bayareapb]

you didnt take out the banjo on top of the reg area did you

[ni7idea]

Hey nice video, can you tell me how to repair the eyes, well a part off it?

[bayareapb]

well i dont think they can actually be repaired

[ni7idea]

well someone say me that my ion eyes were damage of a plastic of some stuff like that do you know wat kind of problemen could it be?

[bayareapb]

i dont even understand  your question

[Laxplaya301]

how do you remove the feed neck... just pull?

[bayareapb]

you spin it like you would the top of a water bottle. left to loosen, right to tighten.

[masterma12]

whats a solenoind

[bayareapb]

no the body is plastic which protects the breech of the gun.

[ion1pmr2aimless]

i love u thanks soo much for this vid it saved me money from taking it to the pro shop to get cleaned for 20 bucks

[ionballer13]

i hate this song wayyyy to old

[faqhnhostile]

Thanks for the video, alot easier than reading the manual. lol

[bayareapb]

no prob

[chaos276]

what kind of trigger did you have? cp rake?

[bayareapb]

yea a cp rake

[bayareapb]

lol look in the credits of the song.

[bayareapb]

no prob..

[P8ntb4ll3r]

nevermind got it

[P8ntb4ll3r]

How do you remove the hose from the front banjo fitting to install the QEV? I bouhgt a qev and dont know how to remove the hose from the board. ITS HARD

[bayareapb]

you pull it?

[ajwf95]

if u push the grey circular tab IN towards the banjo, you should be able to slip out the hose. Make sure your taking the banjo connected to the clear hose, not the blue one, and make sure you make the appropriate cuts to accomadate the qev, which will take the place of the banjo.

[shakeybone]

how often do you clean your ion