NEW CIRCUIT FOR SELF CHARGING MAGNETIC MOTOR 2

[1noen1]

If this actually works why aren't you using it to power your house?

[nanbamanbo]

Dumbjohn

[121MAGICK]

Great demo showing next to nothing but a steal ball move slightly no meter to show power produced as with all this stuff equalibrium is a BIG FUCKING PROBLEM isnt it...?

[dmitrybrant]

If it's a "self-charging" circuit, then you should be able to take away the battery!

[beingenius]

Once again - I ask the same serious question that I ask everyone who has something that look like it might be a good idea...... please...... why don't you show clearly the watts (amps X volts) used to power the device, and the watts (amps X volts) generated by the device? Otherwise, why show anything at all? Your "estimation" of power going back to the battery is useless.

[Spirality0]

Why do people take a good idea, nicely presented, then crap all over it with annoying music?

Hearing the device operating is important, and so is not getting a headache with the experience.

[ZEROPOINT132]

@Spirality0 Yes I agree with you, I'll try and do this in future, in the meantime you can turn it down or off. Thank you.

[TheReasonWhyGuy]

@ZEROPOINT132 Don't... the music is fine, he's just being a douche XD

[ZEROPOINT132]

@TheReasonWhyGuy Hi. OK

[Spirality0]

@TheReasonWhyGuy obviously didn't hear it before ZP changed it a few months ago, its definitely better.

[Spirality0]

@TheReasonWhyGuy You didn't hear it before ZP changed it, sounds better now.

[jokerrabit]

@TheReasonWhyGuy yea I happen to like the music, though it would be nice if you can get your camera to focus better.

[mksboysal]

@Spirality0 Totally agree with you man, WHAT IS THIS CRAP ANNOYING MUSIC. please remove that.

[DanVonfire]

@mksboysal yeah, down with bad music

[DanVonfire]

@Spirality0 yet another "Why do people take a good idea, nicely presented, then crap all over it with annoying music?" (Yet Another WDPTAGINPTCAOIWAM / YAWDPTAGINPTCAOIWAM). The long version for: Why do people use shit music in their vids? (YAWDPUSMITV).

[am1frigider]

@Spirality0 how is this crappy music ?

[theshiningeagle]

@Spirality0

the ball will stop spining so it is not a free energy

[jybrghtwll]

side note: songs that continually repeat are sofa king annoying

[nudeteawithwoodreaux]

ac/dc pre bon scott

[shiznitbitslap]

Your music fking sucks man. You dumbasses always think we wanna hear that shjt

[Taylaron1]

where did you find the little cone-stand for your magnet??? I want one! lol

[eh06105]

ac/dc song

[JRBeaman]

With careful techniques you can approach 99% efficiency but never quite get there because of the losses. More out than in? Sorry, that ain't gonna happen, But you can learn a lot from the effort on how all this stuff works. BTW, you will lose some efficiency with the resister, because it changes some of your energy into heat.

[IST814]

nice .. but i doubt you will find a buyer ... : )  anyways nice work go find a floro ballast ! i find that when i fire it 1.5vdc from a aa battery .. i am returned 1500vdc spikes on my scope from ALL WIRES! : )

BTW IM A BOY AND YES YOU CAN SIT NEXT TO ME GIRL! : ) LOL

H

[then3rdboy]

AWESOME how long is the longest run you have done with this

[PhuqueU]

drink a 5th of whisky and smoke all night while doing this, the next three days you wont feel like smoking anything, and it is that initial first 3 days that is normally the toughest, after that you're home free, that's how i quit.

[zebok3]

Try this if you choose: Replace the 1500 uf

capacitor with a variable capacitor, recognizable as a semi hemi radio tuner. This will permit you to achieve tank resonance between the secondary and the capacitor. The charge transits the battery and returns the pulse to the power coil, it does not charge the battery.

[LoneOarman]

Quote Lindemann: Tesla said in patents that there are 2 different types of particles. One is electron, other is aether. If you block electron via a super fast charge gap with over 1 million cycles and 100KV then cold electricity appear from the pure flux of aether. No electron can go that fast. So the thing is to purify the electron from the aether. This can be done only via a spark with smaller duration than 10mhz. So all your circuits are useless in this realm.

[indie3]

Nutball pseudoscience.

[knowledgemonger]

Be careful when using a scope or other costly gear around inductors with current being switched on and off. You can get very large spikes of voltage that can drive the amplifiers to their limits. This can lead to the DC point shifting.

Basically what you have made is a dynamotor. These were very clever devices of the era of WW2 that converted 12V or 24V DC into hundreds of volts for running radios. They can be quite efficient with good design.

[ZEROPOINT132]

Hi knowl, a dynamotor, good description.

Thanks for the advice very helpful, good job I don't know how to use the scope.

cheers.

[knowledgemonger]

Scopes aren't that hard. What sort of scope is it?

Look for a ground of controls with the "word trigger" near them.

If you don't find "trigger" look for "sync". Tell us which you find.

[DanVonfire]

@knowledgemonger shiiiat u think thaz bad? i accidentally opened a wormhole when my amps blew out and found myself in a parallel universe where Megatron and Starscream were married and had a Superman clone army slaving everyone to dig gold for them in a desert called Hell! Thank God they had a short version of the history of their planet lying on the ground.

[Mopozco]

Good job, "0." !

U've got very economical low power bemf bifilar setup, similar to mine (see video resp) but running on transistor and 1.3V bttry for 32hrs, no core.

Put cupercap across bttry it will run much longer...

5*...

[ZEROPOINT132]

Hi, the coils are wrapped separately, 200 turns secondary wound over the top of the 50 turns primary.

cheers.

[AdminOnDuty]

Can you clarify the reed switch connection and the C2 connection. It appears the reed switch is across LED 1 feeding primary and C2 is in series with the 1.2V battery - is this correct?

Thanx :-)

[ZEROPOINT132]

Hi, yes the reed switch is across the led where it Say's reed switch, it didn't come out on the drawing, C2 is across the battery.

cheers.

[AdminOnDuty]

Thanx.

I would like to see C1 changed for two 10uF caps in parallel - you may have to increase their voltage rating. (optimally 19.5uf total)

This change will make your secondary resonant at 496.17 Hz impedance matched to the coil resistance. Of course the magnet RPM will 29760 but a little magic spray will help that ;-)

The primary is detuned - I don't see an easy way to fix that because even at 49.617Hz it would have an impedance of over 90K Ohms.

Let me know if secondary LED fails.

[overunitydotcom]

Hi, looks good.

DO you have a scope ?

Can you show the voltage at a 1 or 10 Ohm shunt resistor directly in series with the battery ? This is the only

way you can see, if more negative current spikes go back to the battery and thus recharge the battery.

The mechanical reed switch is very important.

Does it spark ?

WHat kind of electrode points does it have ? What metals ?

Many thanks.

[ZEROPOINT132]

Hi, I do have a scope but not completely sure how to use it

The resistor directly in series with the battery? I assume you mean place the resistor in series with the charging circuit part, I'll put in line with positive and negative feeds and get back to you

This is a mechanical magnetic reed switch encased in glass, I haven't seen any sparks.

I normally put a small capacitor across this switch to stop them pitting, similar to the condenser across the contact points in a car.

cheers.

[ZEROPOINT132]

I saw it first