59 plate HHO Generator Demonstration.

[mike29571]

Beautiful design.

[TheUnDeRGRouNDHoBo]

cool im still to install my set up i got from yo , but would it be possible to use a 150 amp or even 60 amp hobby or rc car esc to supply the power from lipo batteries which i have in all kinds of voltages for a bench set up hho system ? and delvis with diesel systems how does 1 stop water vapour entering intake pre turbo ? i havent installed mine for that reason just dont need a water drop hitting my turbine spinning at high rpms or am i worrying over nothing

[delvis11]

@TheUnDeRGRouNDHoBo The hobby car setup will work fine.

For the vapor you can use a air dryer for an air compressor to catch any droplets that mite excape.

[TheUnDeRGRouNDHoBo]

@delvis11 thx delvis never thought of that i have a spare for my compressor in the shed wonder if i placed some brass wool or similar in the water catch , if that would help with flashback to maybe cheers mate thx

[madscientist4energy]

This is brilliant ,

I did watch a video of a guy years ago were it showed him welding ,on that video I'am sure he showed that the torch would not burn his hand ,it just turned back to water .I wonder if you can confirm this .

I 'am trying to make your PWM ,Could you send any schematics of your latest version and any info you think I would need My e-mail paul_gillespie1@sky.com . At the moment I just need the pwm for a dc blower motor of about 200w.Do you have any kits for sale?

[delvis11]

@madscientist4energy hho will burn flesh really well :)

I have that pwm on my site for $43

[bigbryjack75]

How much to buy the torch set up that is a neat deal and would be extreamly handy just let me know thanks!

[delvis11]

@bigbryjack75 I have them for purchase on my website.

[fuecellh2o]

Thanks Steve, Got any comments on Myhydrogencar. Gas Separation and the safety factor.

Dave.

[fuecellh2o]

Steve, Thanks for your updates. Really helpful and encouraging.

Could you please tell me your plate set up on that monster.

Dave

[delvis11]

@fuecellh2o it's a neg., 57 neutrals and a pos.

1/16 gap

[js64984]

how much beter milage do you think i could get from a 110 land rover 2.5 liter and do you think mileage shop is good. thanks a lot! nice flame

[tonijesus1]

Hi and Thank you! :)

[mantis777A]

Are you using the Nickel plates or the Stainless Steel plates on that one?

[KyleCarrington]

Steve, its a lot of fun trying to meld (moltweld) dissimilar items, materials.

[delvis11]

Iactually did this video for a guy that hasn't a clue what to do. I hope this helps him.

[KyleCarrington]

Now hook up an air compressor, mix it and PUSH that slag!!! Then you're really cutting! (albeit creating a bit of NOx's too, but still cleaner and way cheaper than acetylene/oxygen)

[delvis11]

@KyleCarrington I just got off eBay where I bought a cutting torch and hose after seeing your post. I'm going to try it :)

[KyleCarrington]

@delvis11 awesome. you should be using proper delivery anyway. we all should. 5 lpm is actually a lot of gas, as you know, and equipment used should be tough, durable. I'm still working on my 59-63 plate but will post a video if i ever get it all figured out. im still struggling to determine that if i test my mains, for example.. and i get 199v - then i rectify to DC... i will arrive at a number. if my goal is 2.3v per plate gap, how will i know what the LOADED voltage will be????

[jordanr1504]

Do you have any generators that are perfect for use in a car to increase mpg?

Videos or just specs to build one?

Much Appreciated.

[delvis11]

@jordanr1504 I do have hho systems. I also have a lot of reading material on my website. click on the link above the comment section. Thx

[sylvanenergy]

Hey Steve, which bridge rectifier do you have in that switch box?

[delvis11]

@sylvanenergy its a 70 amp. Its on ebay.