HPI Savage X with STS D30M and STS 0702 (Wheelie Test)

[BMXERJOEY100]

and also how did u get it to just ride the wheelie bar i hve one also but cant make it ride it like that

[biollabendani]

@BMXERJOEY100

If you have tune your engine nicely and it still did not wheelie, chances are that you need to use lower T pinion, or maybe use higher traction tires. If you use savage XL, I suggest you to change the tires to smaller diameter ones..

[BMXERJOEY100]

@biollabendani yes ik but your just riding the wheelie bar like its nothing mine will pop up but wont ride the wheelie bar it will just flip back

[biollabendani]

@BMXERJOEY100

I see.. Then you have to practise your throttle finger then. Mine wheelie at 3/4 throttle, so after it start to wheelie, reduce the throttle to half, then gradually increase it as the speed increase to maintain the wheelie..

[BMXERJOEY100]

do you remember how mucch hp is in this? will it work in my savage xl? plz reply soon

[biollabendani]

@BMXERJOEY100

I know it was claimed to have about 3HP but the actual spec would be 1.6HP @ 25000rpm, max rpm 35000.

Same goes to K5.9, they claim it to have about 3HP but it surely have less than that.

You can use this engine in savage XL, but I dont know if it will wheelie as easy. If it is not, you can always change to lower gear ratio.

[thejewels92]

hello!! what do you think about this engine?? i have a savage 25, do u think that will change somethings if i buy this?? thanks!

by!

[biollabendani]

hello, my personal opinion is, of course it will change a lot of thing. stock savage 25 is powered by .25 engine while savage x is powered by .28 engine. this engine is .30 engine. normally bigger engine produce bigger torque and hp, but in contrary, they rev slower (lower max rpm). so if you'd like to use this engine, i'd suggest to use higher gear ratio to achieve better top speed. additionally, i'd would recommend you to seal the engine prior use.

[dabombcreator]

Nice!!

[biollabendani]

thanks! :)