WE SCAR-L Open Bolt GBB

[22ndSASreenactor]

I could not see the open bolt,might be the camera,just asking before I rant :P but aren't SCARs a closed bolt type weapon?

[gearsofwarmad2]

Ermmm im having trouble between this and a we M4 open bolt, any help?

[bigredmatt13]

i got a WE m4 and the bolt was bent... wtf

[chunkyfecalbreakfast]

@bigredmatt13 er, send it back!

[MMReleese]

You're a weapon Freak !!!!

[MMReleese]

You're a weapon Freak !!

[johnibanezsound]

Great job!!!! What's the pressure in bar???

[Nimesh89pwns]

read description give lots of info

[legopolice11]

@creasy919 thanks

[legopolice11]

Hey can sombody please help me i found a we scar lisened on evike and a we scar like this one on airsplat on evike 330$ on airsplat 260$ they have different trademarks on them but are they're any other differences besides that?? If so please tell me thanks

[Creasy919]

@legopolice11

It can't be asserted, but goods of Evike seem original custom items using an upper receiver made by Cybergun.

(WE doesn't acquire a license of FN HERSTAL.)

Therefore it'll be the price higher than 100 US dollars more than the WE original.

[gamer6ism]

@legopolice11 im selling mine

[TheOriginalCptAwesom]

@legopolice11 the one on airsplat is the closed bolt version. It also has a different hop up, and is much more unreliable. It is not worth the 260, but the open bolt one is worth the 330.

[ripflick]

Is the Blow back really heavy or is it light? Will it more your body? I am looking for a hard kick GBBR. I think the WE AK-74UN has more kick does it not?

[Taxemicshadow]

@ripflick we g36c all the way

[Creasy919]

@ripflick

WE SCAR-L open-chamber+RA-tech steel bolt=The one you're searching for

[AribterRyan]

@Creasy919 What sort of mags do you use

[Armaangandevia1]

how do i load the gas

[Krazyazn881]

if i put my hand in front of the bolt how much wud it hurt?

[KingBalisong]

@Mrtoaman gbb

[HDairsoftTV]

To get the flash hider off just put the gun on a flat surface, have a friend sit on it, then use a wrench to muscle it off. That's how I did it.

[Mrtoaman]

is it gas oor electric

[afeir1023]

what kind of grip is that

[MrAirsoftSniped]

i heard you have to put rubber or something behind the recoil rod so it doesnt break, is this true? or have or havent you done it

[Creasy919]

@MrAirsoftSniped

I have done.

And operating pressure is lowered 0.05 MPa all together, but a defect doesn't occur.

RA-TECH is selling reinforcement parts already.

[ROVIC111295]

Which one has more recoil?

WE PDW or This SCAR-L?

[MrAirsoftSniped]

@ROVIC111295 scar l

[Lonestar113355]

how did you get the silencer on, did you remove the flash hider?

[Creasy919]

@Lonestar113355

Do you know that there is Hider with thread for suppressor installation in M4 and SCAR-L?

The state of the installation is being also shown by another movie.

[rexy0the0man]

@Creasy919 hey how can you get a silencer on yours??

[Creasy919]

@rexy0the0man

They're ordinarily sold at a shop in Southeast Asia including Japan. (Airsoft only)

[dobie800]

@Creasy919 how do you know what type/size

[ajsy1031]

Is it really compatible with AEG inner barrels???

[Creasy919]

@ajsy1031

A product of RA-TECH seems so.

It can't be used for AEG of an other company because 2 ditch locations fixed on a HOP chamber are different.

[ajsy1031]

@Creasy919 ok thanks :)

[sparta139]

Does the FPS stay below 400 on this one?

[Creasy919]

@sparta139

Yes.

[sparta139]

@Creasy919 Without the NPAS valve?

[Creasy919]

@sparta139

Yes.

Because high pressure gases like the R22/ green gas a manufacturer recommends can't be used in Japan.

[DavideBaldanti]

nice gun, but i think that all the gas guns have a problem: the magazine don't have some bbs

[wasandd]

@Fuckingwev how accurate is it?

[Creasy919]

@wasandd

It's within 1 inch by 11 feet of the shooting range.

[thomashradecky]

Why do you move so slow!?

[AirsoftCalifornia]

Do you happen to know what the threads are?

[shazeebmw]

hey the lower receiver is it metal or abs plastic

[Creasy919]

@shazeebmw

ABS.

[wasandd]

have you encountered any problems with the gun yet?

[Fuckingwev]

@wasandd I have one and it works perfectly till now, and accurate too

[ComradeSn1P3r]

How do you like the AFG?

[ThatzFubarPT12]

how do you like the recoil on this thing?

[XboxTobson360]

this is not a open bolt !! The Bolt is closed

[Iizmstrcheef]

@XboxTobson360 the bolt position is set on the magazine

[MillionthWings]

Wrong. Its a Magpul AFG (angled fore grip)

[HollywoodUndeadzz]

@MillionthWings Also know as the FAG (foreward angled grip) lol

[12ielHavoK]

A magpul pts

[eyanvenom]

what is that front grip called?

[12ielHavoK]

Do you know where I can get one

[12ielHavoK]

On the bottom of the mag what is the cable coming from the bottom called

[Creasy919]

@12ielHavoK

This is the hose which supplies magazine with air from external tank, not a cable.

[guythatmadethisvideo]

@Creasy919 this or g39c (WE)

[guythatmadethisvideo]

@Creasy919 this or g39c (WE) which one do you prefer

[TheSquishy200]

@Creasy919 how did u connect a tank to the gun? if i could do that then i wont get the polar star pr-15

[o00BIGboss00o]

AFG - You're doing it wrong...

[Jonnybowden0]

is this worth getting? because if im allowed, im getting it

[markubiak]

@Jonnybowden0 The problem with GBBR's is expense. It may not be that much for the gun, but mags are $40 a piece (if I remember right) and only hold 30 rds. GBBR's also require a lot of maintenance and green gas/propane.

[Jonnybowden0]

@markubiak what exactly do you mean by maintenance, like oiling and stuff?

[markubiak]

@Jonnybowden0 Yeah, like lubricating it, cleaning it, and general maintenance is a lot more than you would need to on an AEG. Also, they are finnicky when it comes to weather.

[Jonnybowden0]

@markubiak ok good to know thanks :)

[KBblazer]

What size are the rails?

[Creasy919]

@KBblazer

It's not a real size.

Width are small.

[iamerican117]

where did u get the suppresser



[hotice009]

@ipodplaya yes, but WE-tech means open-bolt as "no brass tube".

[LoganIsSuperKewl]

Will You Swll It?

If So How Much?

[bed792]

what does it mean by open bolt

[Creasy919]

@bed792

The open bolt which is being talked about here is just different from an expression of an actual gun.

A chamber is to look empty in this case at the time of a hold open.

The difference with the old AWSS model that have a brass cylinder becomes completely exposed to view.

[DefendTheHouseZ]

Sorry didn't know they don't sell them in US yet

[DefendTheHouseZ]

How is tht open bolt? they dont sell them yet

[Creasy919]

@DefendTheHouseZ

They're ordinarily sold even now at the dealer in Hong Kong and Taiwan.

A recoil shock is very powerful for an open bolt model, so attention is necessary to damaged component.

[DefendTheHouseZ]

@Creasy919 no i mean like how i think tht is the AWSS system and WE just came out with the generation 2 open bolt system

[aaron4820]

@DefendTheHouseZ it's more like "open chamber"... as it clearly isn't an open bolt system, lost in translation

[Creasy919]

@aaron4820

That's right.

Transcription of a product sticker is "open chamber system".

[ipodplaya]

@Creasy919 I know you know that you misinterpreted it, but an open bolt mechanism is when the bolt is actually open when not being fired, this is a closed bolt, where it chambers a cartridge when the bolt closes, and when you fire the weapon, the bolt opens and extracts the round, but in a state of not firing, the bolt remains closed.

[timoyang1996]

@ipodplaya WE-tech is based in Taiwan, so their translation is not very precise, and thusly the open chamber kind of became known as the open bolt system.

[laffyta2]

@Creasy919 Lol the open bolt system is a very maintenance riddled weapon too. My WA system Well goes through bolt's and nozzles like plastic. I've replaced 5 in a year. Shoots better than an AEG tho. Can't wait to buy a WE but I'm stocked up on WA parts... so it'll be hard to make the change.

[calvinnewspaper]

What's the fps on the gun?

[Creasy919]

@calvinnewspaper

310fps.

I don't know the original initial velocity because the down grade is done according to the regulation value of Japan.

[calvinnewspaper]

@Creasy919 I see, thanks :)

[SuperBoomstick]

@calvinnewspaper they ship to Canada and the USA firing 450fps. I can vouch for that mine chrono'd 450 with .2grams when I picked it up in-store.

[calvinnewspaper]

@SuperBoomstick Thanks :D

[Wepen935k]

will the g39c style internals be shared with the m4 mags soon?

[Wepen935k]

When is the new 3 chambered M4 open bolt mags going to be released?

[Creasy919]

@Wepen935k

It's released at the same time with WE PDW open bolt.

[Wepen935k]

@Creasy919 Really? so its internals are like the G39c mags? I thought the only difference was the lower lip for the open bolt.

[Creasy919]

@Wepen935k

Sorry, a question was misunderstood.

It isn't 3 chamber type like the G39C magazine.

The difference with the magazine for conventional brass cylinder models is only the shape of the lip.

A magazine is common to M4/M16/HK416/PDW/SCAR.

Therefore when changing a lip and a follower to open bolt exclusive items, it can be shared.

[HaloCrazee]

Does this SCAR have a blank firing switch, like on the gen. III WE SCARs?

[Creasy919]

@HaloCrazee

There is a blank firing mode in a magazine.

[Rossmancer]

What kind of inner barrels does it take? can you get really long ones?

[Creasy919]

@Rossmancer

The inner barrel is made of brass and the length is 256 millimeters.

[Rossmancer]

@Creasy919

But can it take longer ones?

[Creasy919]

@Rossmancer

RA-TECH is selling a long barrel for open bolt systems.

[Wepen935k]

will be mine when it comes out.

[echiquete]

@Wepen935k

Well, has been out since yesterday at airsoftglobal and airsoftbuddy, please tell us how it performs! Regards

[Creasy919]

@echiquete

There is intense recoil in which WE G39C is exceeded because there is 18.6 millimeters of piston diameter.

10 shots are shot from 9.5 meters of distance, and there is collection bullet performance gathered into 1 inch and within.

[echiquete]

@Creasy919 Thanks!

Since is heavier than the G39 I was wondering of the actual recoil feeled.

[Creasy919]

@echiquete

A part between the receiver and the stock (#027) couldn't finish enduring the strength of the recoil which is that, and fractured.

That's strong recoil.