my camry se has the 3vz-fe in it im currently fixing it after a wreck but i have a few videos on my channel with an exhaust on it, they do have good throttle response and pull hard for the weight of the car
hmmm....last I heard the 3vzfe makes around 270 NM, whereas the gen 3 jap spec 3sgte makes just over 300 NM with 245 horsepower.........definitely sweet sounding though.
Damn that sounds Sooo nice! When I get another mr2, I will seriously consider a v6 swap. And yeah bro, set that bitch off with some staggered 17/18's and your set!
It's only a tiny bit heavier than a stock turbo engine, and because of the engine placement I couldn't feel much difference in weight. If anything handling was better, thanks to the immediate torque available from the V6 on corner exits
I read about the weaknesses of the 1mz on the forums, but I like the fact it's light and the powerband. But the 3vz, from what I heard is easier to install (wiring) compared to the 1mz. More I read, I think I'm leaning to the 3vz. How fast did you install yours?
nice i like allot especially the roar of the 3vzfe Nice work....just wondering how long did it take for your swap???? also did you have to use custom engine mounts too?
hey man, nice mr2! how long did it take u to build that up? and hows the oversteer with that bad boy v6 quadcam? id like to get an sw20 but id like to get the beams model.
the exchust of mr2's are different!!!this exchaust is not very beautiful but the sound is wonderful!!!nice job man!!i have 2 mr2's but the sounds are shits!!!
hey man ur ride is sick! i hav a question tho is there an engine (icluding this one) that swaps directly or almost? or does it require lots of work?
jamaicangangster4 9 months ago
Sounds Creamy. Very nice! :-)
edshift 10 months ago
Man, neat as MR2! Probs gonna get the same exhaust as this, sounds pretty awesome!
OMFGPHR33ST00FPLZ 1 year ago
my camry se has the 3vz-fe in it im currently fixing it after a wreck but i have a few videos on my channel with an exhaust on it, they do have good throttle response and pull hard for the weight of the car
stumpy166521 1 year ago
hmmm....last I heard the 3vzfe makes around 270 NM, whereas the gen 3 jap spec 3sgte makes just over 300 NM with 245 horsepower.........definitely sweet sounding though.
shanosoxide 1 year ago
Damn that sounds Sooo nice! When I get another mr2, I will seriously consider a v6 swap. And yeah bro, set that bitch off with some staggered 17/18's and your set!
bliglum 1 year ago
Sick
ALake2244 1 year ago
Open exhaust eh? Dang the 3vz sounds good
lynchburgcsi57 1 year ago
the 3vz is a GREAT sounding v6.
lynchburgcsi57 1 year ago
hey, I bought this car recently, haha.
mrluvus07 1 year ago
you can feel the weight back there thru slaloms compared with the 2.2 n/a
RingerRacing 1 year ago
It's only a tiny bit heavier than a stock turbo engine, and because of the engine placement I couldn't feel much difference in weight. If anything handling was better, thanks to the immediate torque available from the V6 on corner exits
Sketchhs 1 year ago
@Sketchhs if 20 plus kilos is a tiny bit heavier, sounds good though, was considering this conversion but sticking to my standard GTS for the moment.
MagicAyrtonforever 1 year ago
3vz flywheel
Sketchhs 1 year ago
what flywheel are you guys using for the 3vz to turbo mr2 trans
MrLocostSeven 1 year ago
Sounds beast, just need some nice rims.
TheOmegaeyes 2 years ago
I think I need to change my diaper, THAT ROCKS! 5 stars!
adonian 2 years ago
Awesome. I want to do a v6 swap into my 2 aswell. I just can't figure out if I want a 3V or a 1M though.
safetydate 2 years ago
3vz! 1mz are weak, tiny rods etc... little more power out of the box but you can make that up with the 3vz.
Sketchhs 2 years ago
I read about the weaknesses of the 1mz on the forums, but I like the fact it's light and the powerband. But the 3vz, from what I heard is easier to install (wiring) compared to the 1mz. More I read, I think I'm leaning to the 3vz. How fast did you install yours?
safetydate 2 years ago
@safetydate try the new 2gr! camry v6 with a 6 speed tranny. weighs 100lb's less than stock NA motor...
smgman13 1 year ago
Whats an easy way to get 200 hp from a 3vz ?
bodmon4lyf 2 years ago
@safetydate no do a 5VZ-FE way better engine with alot more power.
austinyoung300ex 3 weeks ago
Anything different than the handling?
Ryoukun16 2 years ago
It's not much more weight than the na motor and about the same as the turbo motor. If anything it's better thanks to the instant and awesome torque
Sketchhs 2 years ago
nice i like allot especially the roar of the 3vzfe Nice work....just wondering how long did it take for your swap???? also did you have to use custom engine mounts too?
jrockisthebest 2 years ago
That sounds just like a Supra!
p4enut 2 years ago
Heh, it does sound like a Supra.
JLindenwood 2 years ago 5
sounds like a supra to me VERY nice ride man!!
FrostzyfulI 2 years ago
hey man, nice mr2! how long did it take u to build that up? and hows the oversteer with that bad boy v6 quadcam? id like to get an sw20 but id like to get the beams model.
12345tou 2 years ago
there is no beams model sw20...
xXmeatwadXx 2 years ago
if u research u will find that there are sw20 with beams 3sge engines
12345tou 2 years ago
not in the states.
xXmeatwadXx 2 years ago
that really sucks man, theyre just as fast as the turbo ones
12345tou 2 years ago
the 2gr swap is just as fast as a turbo car ;)
xXmeatwadXx 2 years ago
Correct. In Japan the "G-limited" ones come with a Beams I believe.
safetydate 2 years ago
They're probably swapped.
safetydate 2 years ago
Sounds amazing.
fromanny 2 years ago
haha love the steelies rims mate... sounds well, i have the same engine but in the lexus cant wait to zorst it...
yunderup 2 years ago
is it just me or does this sound very supra-ish...sounds more like a straight six to me, tis very nice :D
MidshipExpress 2 years ago 12
Very very nice
hungrymeh 3 years ago
the exchust of mr2's are different!!!this exchaust is not very beautiful but the sound is wonderful!!!nice job man!!i have 2 mr2's but the sounds are shits!!!
vasanoole 3 years ago
Dictionary.
shimric20 2 years ago
very nice and deep growl.. I like ! What exhaust is this ? Is it custom made ? And if so.. what diameter ?
Michel4AGE 3 years ago
Totally custom, made from the stock v6 downpipe, mr2 turbo cat, and some 2.25 piping.
Sketchhs 3 years ago
sounds nice!!!
bdub215 3 years ago
Open up to look at the engine next time you make a clip =) wanna see the swap.
AndrewsDenmark 3 years ago