@MangoSmoothie16 Last year for the IROC was 1990. Mine is a '91 Z28. The IROC's from '85-'90 had engine/suspension/decal upgrade packages over the base models.
@jeffg3209 About a year ago, I had Boyd at Boyd Coddington wheels custom make some polished billet wheels from the design I came up with. The new wheels are based off of the factory design, only they are 17's, polished and wider on the back. I'll get around to making a new vid of the car one of these days..
wicked thats teh exact cam i was lookin to get.. my trucks carberated so the prom part doesnt matter to me.. this cams actually smaller than what im runnin now..lol
I have the Comp XR276HR-12 cam (.503/.510 -224/230 - 112). But, it took me MANY hours to get the PROM tuning straight to get it to idle and run properly. If you are not proficient in ECM tuning, I would recommend something smaller than the XR276.
@thc3636 - you can put any size small block cam in them, but that doesn't mean it will be the "right" cam. Picking the right cam depends on cubic inches, compression, head and intake flow capabilities, and your level of prom tuning skills....
@thc3636 - Actually, you can put a .700 plus lift, 250 plus duration etc. cam in it, but that doesn't mean it will run well... The XR276 cam is a decent selection for a 350 ci motor that has half way decent heads / intake with a min. of 9.5:1 compression and a tuned ECM to match. Picking the biggest cam doesn't mean you will make the most power, it's all about matching parts that work well together.
@ms1badz Yea well I bought it semi built and tuned. It def has the entire valvetrain and heads/intake redone. Ive read its one of the best responding cams if you have the supporting mods. Nice Z btw, I gotta all black 4th gen.
What displacement and cam are you running? Sounds pretty raunchy.
KyleP133 2 months ago
I would trade my 944S for that :P But one quick question... Whats special about a IROC Camaro?
MangoSmoothie16 7 months ago
@MangoSmoothie16 Last year for the IROC was 1990. Mine is a '91 Z28. The IROC's from '85-'90 had engine/suspension/decal upgrade packages over the base models.
ms1badz 7 months ago
The car sounds great!! How is the exhaust set up?
fouledout443 8 months ago
@fouledout443 Hooker 1 3/4" longtubes, dual 3 in. y-pipe into a single 3 1/2" spintech catback
ms1badz 7 months ago
@ms1badz Thank you for the reply, and again, the car sounds awesome!!!!!!
davzc 7 months ago
thats what a camaro suppose to sound like
zone6SS 8 months ago
@zone6SS Thanks man! It's too bad the cops don't agree.....
ms1badz 8 months ago
nice very clean car looks great
3rd4thgenFbody 1 year ago
That thing sounds sooo damn good man. Go crush some ricers!
justingarotte219 1 year ago
listen to that baby purr
mrjakkertax 1 year ago
Looks very nice. Sounds great, love the idle. Drop the pillar gauges :) BTW, polished wheels?
jeffg3209 1 year ago
@jeffg3209 About a year ago, I had Boyd at Boyd Coddington wheels custom make some polished billet wheels from the design I came up with. The new wheels are based off of the factory design, only they are 17's, polished and wider on the back. I'll get around to making a new vid of the car one of these days..
ms1badz 1 year ago
MAN, thats the best black ive seen on a camaro. NICE!!!
89madcam 1 year ago
Dude everything on/in this car is friggin sweet. black is gorgeous, cam sounds good, and tht exhaust is brutal. props bro.
1986irocz305tpi 1 year ago
that thing sounds mean and nasty!!
Sidewinder9877 2 years ago
Comment removed
concept225 2 years ago
hey i want to get mine painted black how much did it run you
mharris812009 2 years ago
all black everything :]
wat year?!!!!
shaevatho 2 years ago
wicked thats teh exact cam i was lookin to get.. my trucks carberated so the prom part doesnt matter to me.. this cams actually smaller than what im runnin now..lol
jarrodheap 2 years ago
what cam did you use.. im currently lookin to replace the one i put in, got some bad advice and got one that was a couple steps to big..lol
jarrodheap 2 years ago
I have the Comp XR276HR-12 cam (.503/.510 -224/230 - 112). But, it took me MANY hours to get the PROM tuning straight to get it to idle and run properly. If you are not proficient in ECM tuning, I would recommend something smaller than the XR276.
ms1badz 2 years ago
@ms1badz I got the same cam in my 94 z28. Is it the biggest cam you can buy for the L98 and LT1?
thc3636 1 year ago
@thc3636 - you can put any size small block cam in them, but that doesn't mean it will be the "right" cam. Picking the right cam depends on cubic inches, compression, head and intake flow capabilities, and your level of prom tuning skills....
ms1badz 1 year ago
@ms1badz Right, but this is one of the biggest cams you can put in a LT1 right?
thc3636 1 year ago
@thc3636 - Actually, you can put a .700 plus lift, 250 plus duration etc. cam in it, but that doesn't mean it will run well... The XR276 cam is a decent selection for a 350 ci motor that has half way decent heads / intake with a min. of 9.5:1 compression and a tuned ECM to match. Picking the biggest cam doesn't mean you will make the most power, it's all about matching parts that work well together.
ms1badz 1 year ago
@ms1badz Yea well I bought it semi built and tuned. It def has the entire valvetrain and heads/intake redone. Ive read its one of the best responding cams if you have the supporting mods. Nice Z btw, I gotta all black 4th gen.
thc3636 1 year ago
@ms1badz Also, what is your idle set at? Mines at 550 with some real good lope.
thc3636 1 year ago
bad ass. Did you do the 6 speed swap yourself ?
onlyridechevys 2 years ago
I built the motor / exhaust / trans swap / tuned the ECM / interior , etc.. basically everything except the paint.
ms1badz 2 years ago
i have one jsut like this but i have a ss hood and its red lol. nice
liltaz1225 2 years ago
Dude...i love this car me and my dad built a car tht looked just like this black everything and had that awesome spoiler on the back!!
bansheeboy09 2 years ago
Thanks for the compliment!
ms1badz 2 years ago
sounds sweer
Motorfordtoyota 2 years ago
perfect nighttime car
Trendyrapslut 3 years ago
F'n sweet man.
seannana 3 years ago
mm ur car is sick. i want ur exhasut and paintjob. then my car would be complete.
bahahaha
racerquinny 3 years ago
Sounds awesome! Is it still TPI?
iroc2122 3 years ago
Yes, SDPC vortec base, ported plenum, ported SLP runners.
ms1badz 3 years ago
Pretty sweet. I like the way it knocked the camera back lol.
Av3rnus 3 years ago
me too!
RWDtech 3 years ago