for those with these problems here's a trick I've found here's a trick if my hp60 displays incompatible or used cartridge. first print the file you want to print now your get a small printer icon on the bottom right. then hold the on/off button then cancel button hold for 6-10sec then release, this will print diagnostic page. after it will print your file. sometimes you would need to press cancel button after diagnostic page. by the way i have hp f4480 but you really need to replace the hp60.
Update: my printer broke, it doesn't feed the paper properly. the problem was a piece of plastic broke, the part of the mechanism that feeds the paper, it happened when i had a paper jam.
good thing i had an old printer which had the same part so i just switched it. and also i had cartridge problem like used cartridge and incompatible cartridge. I've tried cleaning the contact but doesn't work. i think this happens if you use the cartridge too long.
my cartridge is new i dont have to put ink in it, but i first put ink in the reservoir making sure the hose is locked or raised. when all reservoir is filled. i slowly lower the hose so that the ink will run to the end of the hose. before i stick the the end of the hose(part where there is a needle) in the cartridge.
the cover is slightly ajar, but i guess you could modify the lid but it will damage it.
Hello all.. i am having problem with DIY ciss. i cant seem to get it to work on a HP deskjet 1000.. ink just leaks into printer..
MHuslin 2 weeks ago
for those with these problems here's a trick I've found here's a trick if my hp60 displays incompatible or used cartridge. first print the file you want to print now your get a small printer icon on the bottom right. then hold the on/off button then cancel button hold for 6-10sec then release, this will print diagnostic page. after it will print your file. sometimes you would need to press cancel button after diagnostic page. by the way i have hp f4480 but you really need to replace the hp60.
xirmiji 3 weeks ago
Update: my printer broke, it doesn't feed the paper properly. the problem was a piece of plastic broke, the part of the mechanism that feeds the paper, it happened when i had a paper jam.
good thing i had an old printer which had the same part so i just switched it. and also i had cartridge problem like used cartridge and incompatible cartridge. I've tried cleaning the contact but doesn't work. i think this happens if you use the cartridge too long.
xirmiji 3 weeks ago
try this press and hold power button then press x wait 5sec then release will print test page
xirmiji 11 months ago
how will you disable empty ink warning in the led monitor of your printer?
sage99c 11 months ago
i used super glue on the cartridge for the clip, its more secure, the double sided tape didnt work that well
xirmiji 1 year ago
my cartridge is new i dont have to put ink in it, but i first put ink in the reservoir making sure the hose is locked or raised. when all reservoir is filled. i slowly lower the hose so that the ink will run to the end of the hose. before i stick the the end of the hose(part where there is a needle) in the cartridge.
the cover is slightly ajar, but i guess you could modify the lid but it will damage it.
xirmiji 1 year ago
can you kindly teach us how to put the ink on the cartridge?
avielknot 1 year ago
how are you going to close the lid?
somwk 1 year ago