Great to hear you pm... thanks for the kind words. Yeah...Evans acquired Puresound. The Custom Pro's was an assignment..."Hey Bob invent something new in snare wires! I start sweating every single time I hear that request. BTW- we just acquired Pro-Mark... ahhhhhhh drumsticks!!!
hey bob ive been using these snares for months now.... and i had no idea!! they are amazing! i just thought i got lucky when i picked them.... nah bob gatzen had a hand in them!
Got myself some brass puresound strands, and they are everything you said they were! Lovin that A custom crash next to your ride cymbal, can you tell me what size and thickness it is? Thanks
@jeffrey135 Coooola! Next you should pick up a set of the 20 or 24 "steel" wires. They generate more "spread", fatter tone, wider range of tension adjustment. Remember, the Pro Custom design let's you change snares in less than a minute!! Good luck...let us know how it works out.
BTW- Just returned form PASIC. Evans ran a contest based around how fast the CP's can be switched...the winner won $3k in gear...he dismounted & mounted the CP snares in 20.6 seconds!!!
@pantsman6 Hi pants, Go to Evans Drumheads online and click on Puresound than Pro-Custom Snares. Evans will provide you with the closest local dealer in your area. Let me know what you think of them.
Hi bob ! I'm new to drumming what are those little cymbals on top of your crashes? And what kind of snare drum are you using in the quick release demo at 7:30? I've never seen a shell that thick before. I am putting in ordering for the custom pro snare this week! Your tips and tuning have helped greatly! Thanks!
Ingenious invention there, Bob!!! :-) I do have one question, though - In a different video where you talked about how you can change the sound of a snare drum by loosening the snares for a more open sound, would you able to do the same with the Custom Pro snares while trying to reduce sympathetic snare buzz at the same time??? If not, how exactly can you get a more open snare drum sound with those snares with little sympathetic snare buzz???
@zackman2 Thanks Zack! The CP's offers more usable tensioning "range" than trad snares. However, the looser the snare wires the more you encourage sb. Many drummers complain about sb... but we must keep in mind, we are dealing with basic acoustical/vibrational phenomena. Currently, I'm working a product that will provide more sb control with minimum impact on overall snare drum sound.
@bobgatzen Thanks for the reply!!! Very good information. I, like many drummers, always brag about snare buzz, and the product you're currently working on sounds just like something I need. I'll definitely be keeping my eye out for your latest invention to see the light of day!!! :-) Thanks again!!!
@hiservant47 Hmm... seems to recuperate somewhat farther into the movie. Must be a YT glitch... this wasn't the case when uploaded. Oh well... life goes on. Good observation... thanks for the tip 47
@lawrencea92 Not likely...the clip formation is the key to the strapping design. However, we will expand the CP line. In fact the 10" and 12" snare wires are about to be released.
@lawrencea92 Overtime the CP's will include many different snare-wire configurations. The concept is to develop a vast library of snare-wires and taking advantage of the "Quick-Change" function from the CP's. We ran a contest PASIC this year. The idea was how fast can the drummer switch snare wire. The winning prize was $2000.00 of Evans product. The winner changed wires in 21 seconds!!!!!!!!!!!!!!
@lawrencea92 well i have the custom pros and actually kept the straps but changed the wires to the puresound twisted ones, the straps work with any snare wires as far as i can tell, tried them with about 4 different types of wires
@diamondyeqy We are about to release 3 new snare models for the CP's... 10", 12" and 14". Can't describe them to you at this time, but they'll be released fairly soon. 40's? it's possible, but not on our agenda yet. You can always write to Evans with your suggestion.
I have a snare I made using a Keller shell. Precision did the edges and bed, and I checked 'em on a granite slab. Everything's true and the beds are beautiful. I bought a set of 16-strand CPs and I'm using the strap you recommended (from a fabric store). I'm using a Trick throw, which is VERY nice, and while I can get the snares centered and tensioned evenly, when playing the drum, there's a TON of buzz and rattle (not sympathetic buzz, mind you) at the "right" tension. Thoughts?
@sp3ci4lkpo Understood. My question is, have you tried other snare wires on this drum? We need a direct comparison to establish the culprit... is it the snare wires or the snare bed contour on this drm? Obviously, if you have success with other snare wire types, than the CP's might not work well on this drum. It could be the overall length of the 16's being too short or too long. The new Custom Pro series sports unique "clip" design that helps to minimize sympathetic snare buzz, worth checking.
All the information on the snare wire material that we can get is that Brass is brighter than Steel... Without playing them it's hard to say what 'bright' does in real life. in my area I can't just try them so I rely on the info I can find. Could you please tell us about application for those materials please?? In your opinion, would you go with brass for sensitive soft music perhaps? Is Steel better suited for Rock?? Thanks so much for helping Bob!
@cristotv1 Both styles are fitting for the musical genres you're suggesting. The Brass will be bit brighter in tone, but will lack the "shimmer" the steels wires generate. If you after a more pointed sound, less sustain and spread than I'd go with brass wires. On the other hand if you're after more more sustain & spread the steel, the steel wires will provide that. Personally... I prefer the steel wires. Over time we are going provide many different snare wire arrays that will fit all styles.
What sound difference do snare metals make? For instance, I'm inclined to believe that a Brass Snare Wire would be more mellow in tone than steel. Would that be accurate, or am I totally off-base? I'm looking forward to more videos from you, they are great. Thanks!
Hey Bob, I purchased the Custom Pros a month ago and I have a curious question. I center the snares and do everyhing the instructions say, but what i'm getting is off center when I engage the strainer. Is this natural? Do the snares suppose "stretch" across the head and be closer to the edge on the strainer side? I like the way they sound, but it makes me wonder if i'm getting the "full sound" when this happens.
@devizzle7 No that shouldn't be happening as long as the hold-down pin is centered into the trough. The only other way this would occur is if the the strap isn't proper aligned in the strainer and butt ends... this would be case with any type snares utilizing a single nylon hold-down strap. Please stay in touch... let me know how you make out.
SWAT - Snare Wire Arrestor & Tuner Drum Muffler Dampener. New & Revolutionary. Drummers all over the world love them. Works magic with snares. Definately check them out. Click Lazetar name link and watch "SWAT" video.
SWAT - Snare Wire Arrestor & Tuner Drum Muffler Dampener. New & Revolutionary. Drummers all over the world love them. Works magic with snares. Definately check them out. youtube.com/watch?v=cXH2cJmQhUk
hay bob i have a pdp set. 8"10"12"14 are my toms. how do i get a bright highpitch sound on them. and wut evans heads shud i use for them. also i have a 10" pearl firecracker snare and want to know wut heads to use on that n how to tune it to get a more poppy sound. im a Gospel drummer
@jdaniels25 For your style playing I'd suggest the Evans G+ batter with the Genera-Reso. The G+ a single ply head that is durable and produces a bright tone, especially with the Genera-reso.
I'd see the same head combo for your 10", if you want an even brighter sound try the Evans "etched" head, less durable but brighter in tone
here's a rookie kinda question:i'm tryin to achieve a snare sound carateristic from the 80's glam and heavy-metal(like Def leppard or Dokken) without the harmonics and stuff,i was adviced to buy evans b-14 dry,but i don't know much about these kind of things and i'm afraid to buy somethin i might regret later. this was the best way i could find to explain this.my snare is a 13" snare. Cheers ! keep up the GREAT work,already helped me with the other posts on tom tunnig!!
@katatua7 Yeah, the B14 generates a fat sound with short sustain... appropriate for your style playing. I can't say enough about the new Puresound " Custom Pro" snares. Overtime we will be adding many different styles of snare-wires. If you decide to try em go for the "Steel" snares vs the Brass.
@dww0902 Thanks dw. No they shouldn't be losing tension. Is the strap loosening up on the butt end and/or strainer? Take the outer strap "hold-down plates" and place them on a flat surface. Overtime , they can distort... gentle tap the plate ubtil it is totally flat.. Please let me know if that fixes the problem.
lmao, looked at my watch when you started changing the snare, it showed about 13:26 and 55 seconds when you started. when you were done, i looked at it again, and it showed 13:26 and 55 seconds. I went "WOOOW! It can't really be that fast!" aaand my watch had stopped xD I thought it showed a minute to get it done xD
@LauenPower We ran a contest at the 2011 PASIC show. We timed drummers having to disengage the CP's and install another snare unit. The record was 26 seconds... the jackpot was $2000.00 worth of Evans gear. 26 seconds!!!!! I guess money talks huh?
Im loving this Bob. I've always been a puresound fan, this quick change method is off the rails in terms of innovation yet so simple, anyone can do it.
Also may i add, i've watched alot of your vids now and they are always very informative and clear, you seem like a geniunely nice guy who loves to share knowledge and tips an im sure im not the only one who appreciates it. If i ever need to know anything about tuning of replacing parts your channel is the first place i go. Hope you stay a while
@ianbhtube Oh thanks so much ian. It's messages like yours that keep me motivated and inspired. I really enjoyed the Custom Pro project. It fell into place quite nicely... it doesn't always go that way though. My assignments are generally marching orders that go like this...."Bob...invent something new"!!!!!!!!!!!!!!!!!ahhhhhhhhhhh!!!!!!!!!!!!!LOL! Thanks again ian!
@screamodrummer1234 I'm a long time Zildjian endorser. My good friend and design expert, Paul Francis often sends me new prototypes to check out. I believe these now in production... they're "Pan...something? Originally, there was a handle attached to the pan...I simply removed it to be able to attach it to the cymbal stand.
Have you messed around with Dynasonics? The snare bridge is pretty nifty. You can get the snares nice and tight, without choking the snare side head. It also keeps the snares pretty flat against the drum head as well. As long as the bridge is straight. Also, what is the resonant head you have on the high tom? Thank you, Sir.
@saminthescamp I haven't checked them out... but now I will. When it comes to product innovation, I intentionally block out other inventors concepts and designs. It works well for me in regards to originality.
The high tom to the far left is a 4x10" Snare drum I built. My latest kit set-up is 3x3...3 toms...3 snare drums
Hey Bob, I just got the Custom Pro 24 strand steel wires. At first I loved them, but then as I tried to tweak them to my kind of sound, I got this really nasty buzzing sound and they make more of a thuddy sound than a nice snarey sound. I can't figure out what's wrong and it's getting me quite frustrated. I even made sure the wires were centered. Please help?
@bumjmm Hmmm... it's important to create equal distance between the back edge of the snare clips relative to the shell. 24-wire configurations in general generate more buzz (more wires). Also, the "brass" version is brighter sounding than the "steel" version. The brass snares may be too bright for your taste. Frankly, I haven't receive a message of this nature, so I need more information to help out.
Question-which brand and style snare drum are you using?
@bumjmm the 24-wire snare configuration is an effort to produce much more "snare" sound vs. drum sound. The 20-wire "Steel" snares are a standard in the industry. Perhaps this is the sound your really after. Write Evans on-line and ask if they can be purchased separately. I think the 20's will solve you problem
@drumdreamer92 Nothing wrong with that. I agree that the buzzing part & parcel of the drum kit. However, most drummers find it irritating. Kind of a catch-22 huh?
Yes, Zildjians exclusively...I've been an endorser for decades...great company, great people! This kit was custom made for a children's program I started... you can check it out @ startarts com. Billy Ashbaugh & I did quite a bit of touring with project.
"Decreased sympathetic snare buzz." AND THE CROWD GOES WILD!
Snare buzz has always been a major issue for me. I think it's because of how I position my 12" tom, and that it's tuned so closely to the bottom snare head.
The speed release system is totally bitchin'! Especially since changing snares on my snare drum requires a wrench and a screw driver.
Hey Bob! Loving all of your videos and I think you sold me on those snare wires. Anyway I just wanted to know if that's one of those Frying Pan Prototype cymbals on your right-most stand.
@bobgatzen Hi Bob, Can you tell me which are the differences between each type of bearing edge(45°, rounded 45°, double 45°). And also; is a Snare Bed important in the reso bearing edge? What if I don't have one?. Thanks a lot for your time Bob.
@CrissBlackHawk The difference is in the "placement" of the bearing relative to the head. The double 45 positions the bearing edge slightly "inwards" and the standard 45, outwards. This affects overall head vibration. In general the stock 45 increases sustain and hi-end Q's while the Dbl 45, a warmer, short sustain.
Snare beds are crucial in regards to controlling "clarity" and snar buzz. It varies depending on the shell design. best to have a PRO check em out for you. Hope this helps.
Hi i want new snare wires but i want great sensitivity,response,nice sound and not too much snare buzz. Which one will provide these Puresound Twisted or the Custom Pro Steel 24 strands?
Simply got to the Evans site and open "Puresound". The CP's are demoed and listed in regards to snare-wire types. Please let me know what you think of them.
Hi Bob. Thanks for directing me here from another of your clips. The quick release components, are they PureSound or something available elsewhere? Links available?
hey bob i finally got my kit since the last time we talked. well. I am using Remo Smooth White Emperors and love them but I want to give Evans a fair trial.
I was thinking EC over EC Reso, with EMAD2, and maybe an EC Snare.
@danvranic That's one of my favorite combinations. I think you'll be very happy with the amount of tuning range, durability and feel. please let me know how they work out dan.
@bobgatzen oh and btw i purchased some PureSound Custom Pro Steel wires not only does it sound like a new snare drum, but i liked the strap idea alot. it also came with a free hazy 300.
i have heard that EC2 over ECReso is like overkill, but i have also heard the opposite, that it makes the toms fuller and deeper.
A great idea for the EMAD2 kick would be to mix it with the EQ2, with the same muffle ring on the inside as the EQ, plus the EMAD foam on the out side. Gives it the midrange it lacks. Paired with a stock powerstroke or EQ resonant head, you'll need no pillows or anything inside. No foam for live or practice, or insert the foam to record. I made my own crude one from boken heads and the EQ ring, to use for old non-powerstroke reso heads... tried it on an EMAD2.... trust me, it sounds perfect.
@sunRsaturn If I'm reading you right...Good idea...best of both worlds. Unfortunately, it would be difficult to deliver it to the public at an affordable price. "Polyester rings" are expensive. You wouldn't think so but imagine how much wasted film there is to make a 1-2" wide x 22" ring. The EMAD is an expensive purchase as it stands, adding more rings would knock it out of the market.
@bobgatzen It would be nice for a separate model. But it would lose the hip hop or speed metal sub bass sound if it was put on all of them. I make the holder as an add on from old black reso heads and the ring from old clear heads. The reso part fits under the hoop and bearing edge with the clear ring to go under that. I use the eq ring for a template for the reso hole and to make the rings, too. So, anyone could just make one themself.
@sunRsaturn We are developing a complete libray of snare types for the CP line. Currently we're testing Stainless Steel wires along with the steel and brass version already available.
Hey bob, I got a question..... Would you be able to use/make something like a projector to put on the bottom of the toms to reduce the tom's interference with the snares? Projector's are usually used with Drum Corps on their marching snares, but perhaps it can help further reduce the tom's interference with the snares. Just a thought, what do you think? I don't have a drum set of my own to try it out on.
@apercussionist91 Sure, I could see how directing the sound away from the drum could diminish snare buzz somewhat. Might be kind of clumsy on the kit but it's a unique idea. You should test it out and share your results with us. Looking forward to hearing from you.
3 very simple words...... saved...my...life!, my snare wires can be tentioned to the point where the snare buzz is bearable, but they don't sound goo,d but these sound fine! thank you again! I must get these!
@stagecustomfan I'm not a flame fan myself. The 2 kits in the studio were designed for a children's program call Start with the Arts. It featured famed cook, Emeril Lagasse and drummer Doc Gibbs. The program was titled, "Start Cookin" ...thus the flame kits.
I have not placed the snare I did this 60 cent fix on with with the kit yet to see if sympathetic buzz is reduced but prelimenary results looks like even the conventional clipped wires lay better against the head definitely. definitely will make wire changin & head changing a snap from here on out if nothin else.
great idea. wish I would have thought of that type of install 30 years ago. I could kick myself for not thinking of it many years ago. would have saved me so much time swapping bottom heads. I just went to Lowes & bought some of those clips for 60 cents. works GREAT on existing wires. The wire end caps lay flatter against the head than traditionally it looks to me
wow thats so awesome.. even it chaning wires took more then a min., that would still be faster then regular snare wires! nice invent, and im deff. gonna get some of these. are these in stores yet, cuz i go to a store called dales drums shop in PA and their a five star shop, so do u think theyd be there yet?
@masterdrummer19 Not sure who's on our distribution list. I'm certain Guitar Center ordered a ton of Custom Pros. You could write Evans On-Line for a local dealer.
@hiimtucker My dad owned and operated a Auto service station. I was driving cars @ 10 years old. By the time I hit 16 I was racing building and racing cars. There's a strong connection between the drum set and car environments. This inspired me to play drums so "teching" my own drums came easy to me. I quit racing after graduation from Hartt College of Music. Did post grad @ Berklee music in Boston...by then it was a long trail of committmant and effort to be an accomplished artist.
@hiimtucker Surely, I've tried alot of em. Currently I like the Zildjian "China Trash" and the "Sound Lab Prototypes" they've been sending me. The prototypes go down to 8" in size! I'm using them on the Blue Flamed kit...check out "Free Improvisation" Pt's 1 & 2 along with this "SnareWare" video on the channel.
@hiimtucker Pay attention to the "resonant" heads... out of sight, out of mind...Renid yourself that reso heads wear out just like batters. Should renew them at least once a year.
@bobgatzen hmm,thanks BG! im kind of having trouble tuning my toms.....my 13" in. anyway. i cant seem to get the resonant head to match the batter. cant tell if it's too high or low. its weird, never been a problem before
@hiimtucker I HATE 13" TOMS!!! No really, the 13" tom is the most finicky drum to tune. Why you ask? simply physics (shell diameter, depth) that limit usable tuning range. The 13" drum seems comfortable at just above the lowest possible pitch (LPP). Tune each head to it's LPP than raise both reso & batter another 1/2 step. This should get you in the zone. Hope this helps... please let us know
@HalomasterA69 I'm always changing snares. My faves are 20 & 24 Steel Blaster wires. Occasionally I use 17 Brass snares (prototypes) for more definition. You goota try the new Custom Pro snares... revolutionary stuff!
yes... if its been quite some time since you changed the reso heads. do it one day with out changing the batters. you will say WOW! I have been missing out on that much sound & did not realize it!???
I say this without changing the batter heads, so that way, people will see just how much changing old reso heads really does improve sound. Then change the batter heads too.
Picked my 14" CP wires (20 strand) at Guitar Center in Fresno, CA . I hear a difference in the sound, very nice!! but I haven't been able to do much to stop the snare buzz from the toms. What about changing my snare side head from a Diplomat weight to an Ambassador weight head?
@BAGGEDBIRDS Yes, the thicker Ambassador should help decrease buzz (slightly). Also, be sure to tune the snare reso to at least an "A" pitch. A loose reso head will encourage additional snare buzz.
@bobgatzen So far so good. I do like the sound of a thinner snare head, I know now that I have tried the ambassador weight. It really helped the sane buzz. It's almost non-existant.
What are you using for a top head on those snares, top and bottom?
@MrBsidemusic They were just released. Best to write Evans on-line for availability. It takes a bit of time to get them distributed and into a store's inventory. For sure, they are in production... please keep me posted.
Ohhh, thank god!! Bob, you just made my day, because this is exactly what I have been looking for, for god nows how long! I've loved the products that Puresound have done so far, but now with your Co-op, I love 'em even more!
Thanks Bob! Once again, you've helped my, and certainly many other's, drumsets too sound better!
Some really smart ideas there, bob! I really like it.
I recently tried puresound snare wires - I really like how they have a much bigger tuning range than most conventional snare wires.
I am an Industrial Design Engineering Student looking for a Master's assignment... any idea if Evans or Puresound would be interested in a trainee? :)
@reallybigphilly thanks rbp! Unfortunately most companies are cutting back. I'd wait until the economy improves..always best to receive a "positive" response.
Hey, what snare drum and heads would you recommend for metal music? thankyou!
Mirozenx 2 weeks ago
What style snare drum (brand, wood, metal, depth) and heads are you using?
bobgatzen 1 month ago
i'm a metal drummer, drum to bands such as august burns red and texas in july, what wires do you recommend? thanks
Mirozenx 1 month ago
Great to hear you pm... thanks for the kind words. Yeah...Evans acquired Puresound. The Custom Pro's was an assignment..."Hey Bob invent something new in snare wires! I start sweating every single time I hear that request. BTW- we just acquired Pro-Mark... ahhhhhhh drumsticks!!!
bobgatzen 2 months ago
hey bob ive been using these snares for months now.... and i had no idea!! they are amazing! i just thought i got lucky when i picked them.... nah bob gatzen had a hand in them!
danvranic 2 months ago
Custom Pros are sold at GC's...not sure they stock the "Steel" wires... it's only a phone call away
bobgatzen 2 months ago
Hey Bob,
Got myself some brass puresound strands, and they are everything you said they were! Lovin that A custom crash next to your ride cymbal, can you tell me what size and thickness it is? Thanks
Jeff from CT
jeffrey135 3 months ago
@jeffrey135 Coooola! Next you should pick up a set of the 20 or 24 "steel" wires. They generate more "spread", fatter tone, wider range of tension adjustment. Remember, the Pro Custom design let's you change snares in less than a minute!! Good luck...let us know how it works out.
BTW- Just returned form PASIC. Evans ran a contest based around how fast the CP's can be switched...the winner won $3k in gear...he dismounted & mounted the CP snares in 20.6 seconds!!!
bobgatzen 3 months ago
@bobgatzen are these sold at guitar center stores
metalopolis1 2 months ago
Ohhhh that is the best invention since the wheel. I need one
pantsman6 5 months ago
@pantsman6 Hi pants, Go to Evans Drumheads online and click on Puresound than Pro-Custom Snares. Evans will provide you with the closest local dealer in your area. Let me know what you think of them.
bobgatzen 5 months ago
This has been flagged as spam show
dw true tone wire + puresound custom pro anti-choke plates and speed release straps = best snare wire ever
killjoyshidae1208 5 months ago
Comment removed
killjoyshidae1208 5 months ago
Hi bob ! I'm new to drumming what are those little cymbals on top of your crashes? And what kind of snare drum are you using in the quick release demo at 7:30? I've never seen a shell that thick before. I am putting in ordering for the custom pro snare this week! Your tips and tuning have helped greatly! Thanks!
readyset 6 months ago
Ingenious invention there, Bob!!! :-) I do have one question, though - In a different video where you talked about how you can change the sound of a snare drum by loosening the snares for a more open sound, would you able to do the same with the Custom Pro snares while trying to reduce sympathetic snare buzz at the same time??? If not, how exactly can you get a more open snare drum sound with those snares with little sympathetic snare buzz???
zackman2 8 months ago
@zackman2 Thanks Zack! The CP's offers more usable tensioning "range" than trad snares. However, the looser the snare wires the more you encourage sb. Many drummers complain about sb... but we must keep in mind, we are dealing with basic acoustical/vibrational phenomena. Currently, I'm working a product that will provide more sb control with minimum impact on overall snare drum sound.
bobgatzen 8 months ago
@bobgatzen Thanks for the reply!!! Very good information. I, like many drummers, always brag about snare buzz, and the product you're currently working on sounds just like something I need. I'll definitely be keeping my eye out for your latest invention to see the light of day!!! :-) Thanks again!!!
zackman2 8 months ago
@zackman2 Working...thanks for writing zack
bobgatzen 8 months ago
I don't understand why companies don't just adopt the marching style snare strainers, allow for each snare wire to be tuned individually
malcolmgetscrazy 9 months ago
@hiservant47 Hmm... seems to recuperate somewhat farther into the movie. Must be a YT glitch... this wasn't the case when uploaded. Oh well... life goes on. Good observation... thanks for the tip 47
bobgatzen 9 months ago
Will the other types of Puresound snares eventually adopt the quick-change strap? That would be great for getting different sounds quickly
lawrencea92 10 months ago
@lawrencea92 Not likely...the clip formation is the key to the strapping design. However, we will expand the CP line. In fact the 10" and 12" snare wires are about to be released.
bobgatzen 10 months ago
@bobgatzen I guess if you did custom pro equalizers then? or something to mix it up!
lawrencea92 10 months ago
@lawrencea92 Overtime the CP's will include many different snare-wire configurations. The concept is to develop a vast library of snare-wires and taking advantage of the "Quick-Change" function from the CP's. We ran a contest PASIC this year. The idea was how fast can the drummer switch snare wire. The winning prize was $2000.00 of Evans product. The winner changed wires in 21 seconds!!!!!!!!!!!!!!
bobgatzen 10 months ago
@lawrencea92 well i have the custom pros and actually kept the straps but changed the wires to the puresound twisted ones, the straps work with any snare wires as far as i can tell, tried them with about 4 different types of wires
baddog16543 9 months ago
Is there any chance that in the future they'll be 40+ strands Custom Pro?
diamondyeqy 10 months ago
@diamondyeqy We are about to release 3 new snare models for the CP's... 10", 12" and 14". Can't describe them to you at this time, but they'll be released fairly soon. 40's? it's possible, but not on our agenda yet. You can always write to Evans with your suggestion.
bobgatzen 10 months ago
@bobgatzen Thanks! You are the best! :)
diamondyeqy 10 months ago
@diamondyeqy My pleasure... happy to help out
bobgatzen 10 months ago
@diamondyeqy My pleasure d!
bobgatzen 10 months ago
I have a snare I made using a Keller shell. Precision did the edges and bed, and I checked 'em on a granite slab. Everything's true and the beds are beautiful. I bought a set of 16-strand CPs and I'm using the strap you recommended (from a fabric store). I'm using a Trick throw, which is VERY nice, and while I can get the snares centered and tensioned evenly, when playing the drum, there's a TON of buzz and rattle (not sympathetic buzz, mind you) at the "right" tension. Thoughts?
sp3ci4lkpo 11 months ago
@sp3ci4lkpo Understood. My question is, have you tried other snare wires on this drum? We need a direct comparison to establish the culprit... is it the snare wires or the snare bed contour on this drm? Obviously, if you have success with other snare wire types, than the CP's might not work well on this drum. It could be the overall length of the 16's being too short or too long. The new Custom Pro series sports unique "clip" design that helps to minimize sympathetic snare buzz, worth checking.
bobgatzen 11 months ago
i dont play drums but this looks like a cool alternative for drummers
Moogotoo 11 months ago
@Moogotoo How observant... good to hear that Moo!
bobgatzen 11 months ago
*Yawn*...
TheAmazing424 11 months ago
@TheAmazing424 lol back to halo for you
Moogotoo 11 months ago
Great drum work! I'll show this youtube channel to my drummer maybe he could take a few tips :) brilliant!
FlygoneOfficial 11 months ago
Hey Bob!, hope you're well.
All the information on the snare wire material that we can get is that Brass is brighter than Steel... Without playing them it's hard to say what 'bright' does in real life. in my area I can't just try them so I rely on the info I can find. Could you please tell us about application for those materials please?? In your opinion, would you go with brass for sensitive soft music perhaps? Is Steel better suited for Rock?? Thanks so much for helping Bob!
cristotv1 11 months ago
@cristotv1 Both styles are fitting for the musical genres you're suggesting. The Brass will be bit brighter in tone, but will lack the "shimmer" the steels wires generate. If you after a more pointed sound, less sustain and spread than I'd go with brass wires. On the other hand if you're after more more sustain & spread the steel, the steel wires will provide that. Personally... I prefer the steel wires. Over time we are going provide many different snare wire arrays that will fit all styles.
bobgatzen 11 months ago
This has been flagged as spam show
Hey bob what's your opinion of Evans hydraulics glass drum heads. I was thinking of trying these heads out. By the way awesome, helpful videos.
Kellano25 1 year ago
Actually the reverse of that. The brass snares are brighter in tone. Thanks for kudos my internet drummer friend!!
bobgatzen 1 year ago
Hey Bob.
What sound difference do snare metals make? For instance, I'm inclined to believe that a Brass Snare Wire would be more mellow in tone than steel. Would that be accurate, or am I totally off-base? I'm looking forward to more videos from you, they are great. Thanks!
DSCRAPRE 1 year ago
Hey Bob, I purchased the Custom Pros a month ago and I have a curious question. I center the snares and do everyhing the instructions say, but what i'm getting is off center when I engage the strainer. Is this natural? Do the snares suppose "stretch" across the head and be closer to the edge on the strainer side? I like the way they sound, but it makes me wonder if i'm getting the "full sound" when this happens.
devizzle7 1 year ago
@devizzle7 No that shouldn't be happening as long as the hold-down pin is centered into the trough. The only other way this would occur is if the the strap isn't proper aligned in the strainer and butt ends... this would be case with any type snares utilizing a single nylon hold-down strap. Please stay in touch... let me know how you make out.
bobgatzen 1 year ago
SWAT - Snare Wire Arrestor & Tuner Drum Muffler Dampener. New & Revolutionary. Drummers all over the world love them. Works magic with snares. Definately check them out. Click Lazetar name link and watch "SWAT" video.
Lazetar 1 year ago
Comment removed
Lazetar 1 year ago
This has been flagged as spam show
SWAT - Snare Wire Arrestor & Tuner Drum Muffler Dampener. New & Revolutionary. Drummers all over the world love them. Works magic with snares. Definately check them out. youtube.com/watch?v=cXH2cJmQhUk
Lazetar 1 year ago
Comment removed
Lazetar 1 year ago
hay bob i have a pdp set. 8"10"12"14 are my toms. how do i get a bright highpitch sound on them. and wut evans heads shud i use for them. also i have a 10" pearl firecracker snare and want to know wut heads to use on that n how to tune it to get a more poppy sound. im a Gospel drummer
jdaniels25 1 year ago
@jdaniels25 For your style playing I'd suggest the Evans G+ batter with the Genera-Reso. The G+ a single ply head that is durable and produces a bright tone, especially with the Genera-reso.
I'd see the same head combo for your 10", if you want an even brighter sound try the Evans "etched" head, less durable but brighter in tone
Hope this helps
bobgatzen 1 year ago
how's it goin't bob?
here's a rookie kinda question:i'm tryin to achieve a snare sound carateristic from the 80's glam and heavy-metal(like Def leppard or Dokken) without the harmonics and stuff,i was adviced to buy evans b-14 dry,but i don't know much about these kind of things and i'm afraid to buy somethin i might regret later. this was the best way i could find to explain this.my snare is a 13" snare. Cheers ! keep up the GREAT work,already helped me with the other posts on tom tunnig!!
katatua7 1 year ago
@katatua7 Yeah, the B14 generates a fat sound with short sustain... appropriate for your style playing. I can't say enough about the new Puresound " Custom Pro" snares. Overtime we will be adding many different styles of snare-wires. If you decide to try em go for the "Steel" snares vs the Brass.
Please lLet me know how it works out for you
bobgatzen 1 year ago
you are amazing
ultimatenerd22 1 year ago
I want one! :) or two! Where can I get them? :)
diamondyeqy 1 year ago
@diamondyeqy Guitar Centers carry them. If yopur having a problem locating the CP's, write to Evans-on-line for a local dealer in your area...thanks!
bobgatzen 1 year ago
Bob, do snare wires have a "break-in period"?
I bought the Custom Pro 20 strand steel wires, and while they sound great (really great actually), I find them to be loosening after little play.
Is this something that just happens with new wires?
I'm a newbie when it comes to snare wires - I bought these wires based on this video and my trust that you know what you're talking about. :)
dww0902 1 year ago
@dww0902 Thanks dw. No they shouldn't be losing tension. Is the strap loosening up on the butt end and/or strainer? Take the outer strap "hold-down plates" and place them on a flat surface. Overtime , they can distort... gentle tap the plate ubtil it is totally flat.. Please let me know if that fixes the problem.
bobgatzen 1 year ago
@bobgatzen
I checked the "hold down plates" and they were fine.
The problem was the little clip that goes into the strap.
It was too far one way (as in not centered in the wires' clip) and was abling the wires to slide further down the strap, thus loosening.
Thanks for the help. :)
dww0902 1 year ago
@dww0902 Yes, very important to center the hold donw been in the clip trough... cool... glad you fixed it.
bobgatzen 1 year ago
lmao, looked at my watch when you started changing the snare, it showed about 13:26 and 55 seconds when you started. when you were done, i looked at it again, and it showed 13:26 and 55 seconds. I went "WOOOW! It can't really be that fast!" aaand my watch had stopped xD I thought it showed a minute to get it done xD
LauenPower 1 year ago
@LauenPower We ran a contest at the 2011 PASIC show. We timed drummers having to disengage the CP's and install another snare unit. The record was 26 seconds... the jackpot was $2000.00 worth of Evans gear. 26 seconds!!!!! I guess money talks huh?
bobgatzen 1 year ago
@bobgatzen yep, that is quite fast!
LauenPower 1 year ago
Im loving this Bob. I've always been a puresound fan, this quick change method is off the rails in terms of innovation yet so simple, anyone can do it.
Also may i add, i've watched alot of your vids now and they are always very informative and clear, you seem like a geniunely nice guy who loves to share knowledge and tips an im sure im not the only one who appreciates it. If i ever need to know anything about tuning of replacing parts your channel is the first place i go. Hope you stay a while
ianbhtube 1 year ago
@ianbhtube Oh thanks so much ian. It's messages like yours that keep me motivated and inspired. I really enjoyed the Custom Pro project. It fell into place quite nicely... it doesn't always go that way though. My assignments are generally marching orders that go like this...."Bob...invent something new"!!!!!!!!!!!!!!!!!ahhhhhhhhhhh!!!!!!!!!!!!!LOL! Thanks again ian!
bobgatzen 1 year ago
LOL!
bobgatzen 1 year ago
Oops. Wrong kind of "snare wire". I was looking for something to put in my survival kit for catching rabbits etc. :D
bluenoserr 1 year ago
Thanks MG... I'll pass on your good news to the Puresound people
bobgatzen 1 year ago
Hey Bob, i just got the custom pro snare wires with your advice and so far i think they're outstanding! Thanks alot, hope you had a good holiday.
MetalGuitarist457 1 year ago
Hey bob i was wondering, whats that weird lookinf, flat cymbal thats stacked on the large ride to your right?
screamodrummer1234 1 year ago
@screamodrummer1234 I'm a long time Zildjian endorser. My good friend and design expert, Paul Francis often sends me new prototypes to check out. I believe these now in production... they're "Pan...something? Originally, there was a handle attached to the pan...I simply removed it to be able to attach it to the cymbal stand.
bobgatzen 1 year ago
Have you messed around with Dynasonics? The snare bridge is pretty nifty. You can get the snares nice and tight, without choking the snare side head. It also keeps the snares pretty flat against the drum head as well. As long as the bridge is straight. Also, what is the resonant head you have on the high tom? Thank you, Sir.
saminthescamp 1 year ago
@saminthescamp I haven't checked them out... but now I will. When it comes to product innovation, I intentionally block out other inventors concepts and designs. It works well for me in regards to originality.
The high tom to the far left is a 4x10" Snare drum I built. My latest kit set-up is 3x3...3 toms...3 snare drums
Thanks for writing sam... let's stay in touch
bobgatzen 1 year ago
Sweet bass drum shell.
Kingofguns111 1 year ago
@Kingofguns111 Thanks King...it's like on fire!
bobgatzen 1 year ago
@Kingofguns111 Ya i love it bye any chance where I can get one.
Kingofguns111 1 year ago
Hey Bob, I just got the Custom Pro 24 strand steel wires. At first I loved them, but then as I tried to tweak them to my kind of sound, I got this really nasty buzzing sound and they make more of a thuddy sound than a nice snarey sound. I can't figure out what's wrong and it's getting me quite frustrated. I even made sure the wires were centered. Please help?
bumjmm 1 year ago
@bumjmm Hmmm... it's important to create equal distance between the back edge of the snare clips relative to the shell. 24-wire configurations in general generate more buzz (more wires). Also, the "brass" version is brighter sounding than the "steel" version. The brass snares may be too bright for your taste. Frankly, I haven't receive a message of this nature, so I need more information to help out.
Question-which brand and style snare drum are you using?
bobgatzen 1 year ago
@bobgatzen I have a Tama Starclassic Maple that is 14 x 6.5, if that helps. THanks
bumjmm 1 year ago
@bumjmm the 24-wire snare configuration is an effort to produce much more "snare" sound vs. drum sound. The 20-wire "Steel" snares are a standard in the industry. Perhaps this is the sound your really after. Write Evans on-line and ask if they can be purchased separately. I think the 20's will solve you problem
bobgatzen 1 year ago
I actually like the snare buzz that my bass drum makes. Otherwise it sounds flat.
drumdreamer92 1 year ago
@drumdreamer92 Nothing wrong with that. I agree that the buzzing part & parcel of the drum kit. However, most drummers find it irritating. Kind of a catch-22 huh?
bobgatzen 1 year ago
are those zildjan cymbols??? and how did u do that paint job? thats pro dude nice video
drummerdude08ful 1 year ago
@drummerdude08ful Thanks dd!!
Yes, Zildjians exclusively...I've been an endorser for decades...great company, great people! This kit was custom made for a children's program I started... you can check it out @ startarts com. Billy Ashbaugh & I did quite a bit of touring with project.
bobgatzen 1 year ago
@bobgatzen are those mutes? o ya i went on that site i just want a custom paint job lol
drummerdude08ful 1 year ago
@drummerdude08ful What do mean by "Mutes"?
bobgatzen 1 year ago
@bobgatzen those black things on ur bass andtop tom next to the high hat
drummerdude08ful 1 year ago
"Decreased sympathetic snare buzz." AND THE CROWD GOES WILD!
Snare buzz has always been a major issue for me. I think it's because of how I position my 12" tom, and that it's tuned so closely to the bottom snare head.
The speed release system is totally bitchin'! Especially since changing snares on my snare drum requires a wrench and a screw driver.
TomMSTie1138 1 year ago
@TomMSTie1138 Love good news... speaking of love... I love the Custom Pro snares as well. Thanks for the kudos Tom!
bobgatzen 1 year ago
Well, I'm sold. I've been struggling to get my tom's to stop resonating so heavily with the snare. Anything that helps is a welcome addition.
Quitarias 1 year ago
@Quitarias Ya got nothing to lose...give em a try and let us know how they work out for you. My motto is EDC... Explore>Discover> Create!!
bobgatzen 1 year ago
Hey Bob! Loving all of your videos and I think you sold me on those snare wires. Anyway I just wanted to know if that's one of those Frying Pan Prototype cymbals on your right-most stand.
DSCRAPRE 1 year ago
@DSCRAPRE Yes it is...just remove the handle and you have a wonderful "bell" sound!
bobgatzen 1 year ago
@bobgatzen Oops...forgot to thank you for the kind words....thank you!
bobgatzen 1 year ago
@bobgatzen Hi Bob, Can you tell me which are the differences between each type of bearing edge(45°, rounded 45°, double 45°). And also; is a Snare Bed important in the reso bearing edge? What if I don't have one?. Thanks a lot for your time Bob.
CrissBlackHawk 1 year ago
@CrissBlackHawk The difference is in the "placement" of the bearing relative to the head. The double 45 positions the bearing edge slightly "inwards" and the standard 45, outwards. This affects overall head vibration. In general the stock 45 increases sustain and hi-end Q's while the Dbl 45, a warmer, short sustain.
Snare beds are crucial in regards to controlling "clarity" and snar buzz. It varies depending on the shell design. best to have a PRO check em out for you. Hope this helps.
bobgatzen 1 year ago
Hi i want new snare wires but i want great sensitivity,response,nice sound and not too much snare buzz. Which one will provide these Puresound Twisted or the Custom Pro Steel 24 strands?
xxxnityninexxx 1 year ago
Simply got to the Evans site and open "Puresound". The CP's are demoed and listed in regards to snare-wire types. Please let me know what you think of them.
bobgatzen 1 year ago
Hi Bob. Thanks for directing me here from another of your clips. The quick release components, are they PureSound or something available elsewhere? Links available?
Penberth1 1 year ago
Hello Bob.
Can the Custom Pro Brass be used on all types of snares?
PorcaroPhillips 1 year ago
@PorcaroPhillips Absolutely! Also, we will offer many different snare wire types...brass, steel, stainless etc.
bobgatzen 1 year ago
2:34, very nice. That was so musical, no matter how many hours a technical drummer would practice that, they'd never improv something that good
TheColbles2009 1 year ago
@TheColbles2009 Thanks Colby... positive feedback... best feel in the world!
bobgatzen 1 year ago
hey bob i finally got my kit since the last time we talked. well. I am using Remo Smooth White Emperors and love them but I want to give Evans a fair trial.
I was thinking EC over EC Reso, with EMAD2, and maybe an EC Snare.
how does that combo sound?
danvranic 1 year ago
@danvranic That's one of my favorite combinations. I think you'll be very happy with the amount of tuning range, durability and feel. please let me know how they work out dan.
bobgatzen 1 year ago
@bobgatzen oh and btw i purchased some PureSound Custom Pro Steel wires not only does it sound like a new snare drum, but i liked the strap idea alot. it also came with a free hazy 300.
i have heard that EC2 over ECReso is like overkill, but i have also heard the opposite, that it makes the toms fuller and deeper.
IYO, what do u think?
danvranic 1 year ago
@danvranic The Ec's are versatile... good tuning range, durability. I think you'll like em...try em on one drum(12") before investing.
Let me how it works out for you
Bob
bobgatzen 1 year ago
A great idea for the EMAD2 kick would be to mix it with the EQ2, with the same muffle ring on the inside as the EQ, plus the EMAD foam on the out side. Gives it the midrange it lacks. Paired with a stock powerstroke or EQ resonant head, you'll need no pillows or anything inside. No foam for live or practice, or insert the foam to record. I made my own crude one from boken heads and the EQ ring, to use for old non-powerstroke reso heads... tried it on an EMAD2.... trust me, it sounds perfect.
sunRsaturn 1 year ago
@sunRsaturn If I'm reading you right...Good idea...best of both worlds. Unfortunately, it would be difficult to deliver it to the public at an affordable price. "Polyester rings" are expensive. You wouldn't think so but imagine how much wasted film there is to make a 1-2" wide x 22" ring. The EMAD is an expensive purchase as it stands, adding more rings would knock it out of the market.
bobgatzen 1 year ago
@bobgatzen It would be nice for a separate model. But it would lose the hip hop or speed metal sub bass sound if it was put on all of them. I make the holder as an add on from old black reso heads and the ring from old clear heads. The reso part fits under the hoop and bearing edge with the clear ring to go under that. I use the eq ring for a template for the reso hole and to make the rings, too. So, anyone could just make one themself.
sunRsaturn 1 year ago
@sunRsaturn We are developing a complete libray of snare types for the CP line. Currently we're testing Stainless Steel wires along with the steel and brass version already available.
Thanks for sharing your ideas with us Sun!.
bobgatzen 1 year ago
what are your thoughts on Phil Rudd?
ACDCisMYlyf 1 year ago
@elScorcho216 5 x13" Alloy. CP (Custom Pro) Purecussion Snares 20-steel "wire". Hazy 300 reso, Onyx batter.
Thanks el... much appreciated!
bobgatzen 1 year ago
Awesome with a capital A
lhemeon 1 year ago
@lhemeon Thanks awe!!!
bobgatzen 1 year ago
I love the sound of your high pitched "rack snare"
yeahmansoul 1 year ago
@yeahmansoul Yeah...me too. It's a 12" DW Solid Shell with Powercenter batter/hazy 300 reso and Custom Pro Puresound Snares.
bobgatzen 1 year ago
Hey bob, I got a question..... Would you be able to use/make something like a projector to put on the bottom of the toms to reduce the tom's interference with the snares? Projector's are usually used with Drum Corps on their marching snares, but perhaps it can help further reduce the tom's interference with the snares. Just a thought, what do you think? I don't have a drum set of my own to try it out on.
apercussionist91 1 year ago
@apercussionist91 Sure, I could see how directing the sound away from the drum could diminish snare buzz somewhat. Might be kind of clumsy on the kit but it's a unique idea. You should test it out and share your results with us. Looking forward to hearing from you.
bobgatzen 1 year ago
3 very simple words...... saved...my...life!, my snare wires can be tentioned to the point where the snare buzz is bearable, but they don't sound goo,d but these sound fine! thank you again! I must get these!
voltronthegreat 1 year ago
@voltronthegreat Very important words!!! Thanks for writing back...good to know the info is helping
bobgatzen 1 year ago
your kit looks stupid with the flames on it sounds good though
stagecustomfan 1 year ago
@stagecustomfan I'm not a flame fan myself. The 2 kits in the studio were designed for a children's program call Start with the Arts. It featured famed cook, Emeril Lagasse and drummer Doc Gibbs. The program was titled, "Start Cookin" ...thus the flame kits.
bobgatzen 1 year ago
I have not placed the snare I did this 60 cent fix on with with the kit yet to see if sympathetic buzz is reduced but prelimenary results looks like even the conventional clipped wires lay better against the head definitely. definitely will make wire changin & head changing a snap from here on out if nothin else.
zash008 1 year ago
@zash008 "SOUND" decision!
bobgatzen 1 year ago
great idea. wish I would have thought of that type of install 30 years ago. I could kick myself for not thinking of it many years ago. would have saved me so much time swapping bottom heads. I just went to Lowes & bought some of those clips for 60 cents. works GREAT on existing wires. The wire end caps lay flatter against the head than traditionally it looks to me
zash008 1 year ago
@zash008 Thanks zash.... I'm enjoying this innovation!!
Please keep me informed
Bob
bobgatzen 1 year ago
wow thats so awesome.. even it chaning wires took more then a min., that would still be faster then regular snare wires! nice invent, and im deff. gonna get some of these. are these in stores yet, cuz i go to a store called dales drums shop in PA and their a five star shop, so do u think theyd be there yet?
masterdrummer19 1 year ago
@masterdrummer19 Not sure who's on our distribution list. I'm certain Guitar Center ordered a ton of Custom Pros. You could write Evans On-Line for a local dealer.
Hope you get em soon... you're gonna love em
Bob
bobgatzen 1 year ago
well there it is, the best sounding drum set on the planet
hiimtucker 1 year ago
@hiimtucker Thanks tucker...means alot to me!
bobgatzen 1 year ago
@bobgatzen Wow! U replied! Cool cool. And yes, best sound ever i think.
And everytime i need drum help, i turn to u dood. The best
hiimtucker 1 year ago
@hiimtucker Thanks so much tucker... always good to get good news!
bobgatzen 1 year ago
@bobgatzen Yup yup! So how did u get so good at tuning and all that jazz ? Haha
hiimtucker 1 year ago
@hiimtucker My dad owned and operated a Auto service station. I was driving cars @ 10 years old. By the time I hit 16 I was racing building and racing cars. There's a strong connection between the drum set and car environments. This inspired me to play drums so "teching" my own drums came easy to me. I quit racing after graduation from Hartt College of Music. Did post grad @ Berklee music in Boston...by then it was a long trail of committmant and effort to be an accomplished artist.
bobgatzen 1 year ago
@bobgatzen Wow, quite the story. And if someone asks me how i got good at all things drums, i will say, "i watched Bob Gatzen on YouTube." XD
hiimtucker 1 year ago
@hiimtucker That would be an honor...thanks ht!
bobgatzen 1 year ago
@bobgatzen will doo. and your welcome. Say, you wouldnt have any opinions on china cymbals would u?
hiimtucker 1 year ago
@hiimtucker Surely, I've tried alot of em. Currently I like the Zildjian "China Trash" and the "Sound Lab Prototypes" they've been sending me. The prototypes go down to 8" in size! I'm using them on the Blue Flamed kit...check out "Free Improvisation" Pt's 1 & 2 along with this "SnareWare" video on the channel.
bobgatzen 1 year ago
@bobgatzen Ahh, cool cool. And yeah, i'll check that out. If u could give the best drumming advise, what would u share?
hiimtucker 1 year ago
@hiimtucker Pay attention to the "resonant" heads... out of sight, out of mind...Renid yourself that reso heads wear out just like batters. Should renew them at least once a year.
bobgatzen 1 year ago
@bobgatzen hmm,thanks BG! im kind of having trouble tuning my toms.....my 13" in. anyway. i cant seem to get the resonant head to match the batter. cant tell if it's too high or low. its weird, never been a problem before
hiimtucker 1 year ago
@hiimtucker I HATE 13" TOMS!!! No really, the 13" tom is the most finicky drum to tune. Why you ask? simply physics (shell diameter, depth) that limit usable tuning range. The 13" drum seems comfortable at just above the lowest possible pitch (LPP). Tune each head to it's LPP than raise both reso & batter another 1/2 step. This should get you in the zone. Hope this helps... please let us know
bobgatzen 1 year ago
@bobgatzen Hmm i think the 16" floor is difficult to tune.. but yeah that worked :D
hiimtucker 1 year ago
@hiimtucker COOL!
bobgatzen 1 year ago
@bobgatzen hey, wow many snares did u use on your main snare?
HalomasterA69 1 year ago
@HalomasterA69 I'm always changing snares. My faves are 20 & 24 Steel Blaster wires. Occasionally I use 17 Brass snares (prototypes) for more definition. You goota try the new Custom Pro snares... revolutionary stuff!
bobgatzen 1 year ago
@hiimtucker
yes... if its been quite some time since you changed the reso heads. do it one day with out changing the batters. you will say WOW! I have been missing out on that much sound & did not realize it!???
zash008 1 year ago
@zash008 ahh
hiimtucker 1 year ago
@zash008 .
I say this without changing the batter heads, so that way, people will see just how much changing old reso heads really does improve sound. Then change the batter heads too.
zash008 1 year ago
hey bob, what drum head do you use for a reso head?
MrStockholmz 1 year ago
@MrStockholmz An Evans Hazy 300
bobgatzen 1 year ago
i know how to completely get rid of snare buzz.. TRIGGERS LOLOLOLOL jk
PearLDrummeR1871 1 year ago
Comment removed
BAGGEDBIRDS 1 year ago
Picked my 14" CP wires (20 strand) at Guitar Center in Fresno, CA . I hear a difference in the sound, very nice!! but I haven't been able to do much to stop the snare buzz from the toms. What about changing my snare side head from a Diplomat weight to an Ambassador weight head?
BAGGEDBIRDS 1 year ago
@BAGGEDBIRDS Yes, the thicker Ambassador should help decrease buzz (slightly). Also, be sure to tune the snare reso to at least an "A" pitch. A loose reso head will encourage additional snare buzz.
Please let me know how the CP's work out for you.
bobgatzen 1 year ago
@bobgatzen So far so good. I do like the sound of a thinner snare head, I know now that I have tried the ambassador weight. It really helped the sane buzz. It's almost non-existant.
What are you using for a top head on those snares, top and bottom?
BAGGEDBIRDS 1 year ago
As always Bob, you are the leader bringing us new ideas and concepts to help us all create unique quality sound. Thank you.
FrameJunkee 1 year ago
@FrameJunkee Your message is timely, I'm working on a new vid for the channel... good to get some INSPO from you...thanks FJ!
bobgatzen 1 year ago
@MrBsidemusic Cool, please keep me informed
bobgatzen 1 year ago
@MrBsidemusic That's great to hear...thanks B! If you have a problem locating the CP's, just write to Evans on-line for dealer info.
Please let me know how it works out.
bobgatzen 1 year ago
@MrBsidemusic They were just released. Best to write Evans on-line for availability. It takes a bit of time to get them distributed and into a store's inventory. For sure, they are in production... please keep me posted.
bobgatzen 1 year ago
that ride cymbal is so dark i forgot how to see
Charlestonthedrummer 1 year ago
Great idea....Nice playing
ventsintheedge 1 year ago
@ventsintheedge Thanks V...always a pleasure to receive good news!
bobgatzen 1 year ago
Ohhh, thank god!! Bob, you just made my day, because this is exactly what I have been looking for, for god nows how long! I've loved the products that Puresound have done so far, but now with your Co-op, I love 'em even more!
Thanks Bob! Once again, you've helped my, and certainly many other's, drumsets too sound better!
TrumMarc 1 year ago
@TrumMarc What a wonderful message, especially today!!!...long story. Thanks TM!
bobgatzen 1 year ago
Some really smart ideas there, bob! I really like it.
I recently tried puresound snare wires - I really like how they have a much bigger tuning range than most conventional snare wires.
I am an Industrial Design Engineering Student looking for a Master's assignment... any idea if Evans or Puresound would be interested in a trainee? :)
reallybigphilly 1 year ago
@reallybigphilly thanks rbp! Unfortunately most companies are cutting back. I'd wait until the economy improves..always best to receive a "positive" response.
Wish I had better news.
bobgatzen 1 year ago